107-7732 PUMP GP-FUEL INJECTION S/N 4TF40050-UP PART OF 147-1753, 147-1977 ENGINE AR ALSO AN ATTACHMENT 953C



FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
SEPARATOR GP-WATER
TANK GP-FUEL
VALVE GP-CHECK
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALTERNATOR GP-CHARGING

TRACK LOADER 953C TRACK LOADER 2ZN
 953C Track-Type Loader Hydrostatic Drive 2ZN01750-UP (MACHINE) POWERED BY 3116 Engine SEBP2794 953C 2ZN   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
390-9331 KIT-INJECTOR
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
 

#SEBP27940120
 

107-7732: PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 4TF40050-UP
PART OF 147-1753, 147-1977 ENGINE AR
ALSO AN ATTACHMENT
i00474498 SEBP2794
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8216 C [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 125-8274 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP27940121
 

183-2824: PUMP GP-FUEL PRIMING

183-2824 PUMP GP-FUEL PRIMING -MANUAL
S/N 4TF40050-UP
PART OF 140-3046 SEPARATOR GP-WATER
ALSO AN ATTACHMENT
i01251687 SEBP2794
1832824 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 9Y-8389 [1] GASKET (FUEL PRIMING PUMP)  
2. 183-2823 [1] PUMP AS-FUEL PRIMING  
  229-3218 [2] VALVE AS (FUEL PRIMING PUMP)  
  061-7539 [1] SEAL-O-RING  
3. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
5. 8T-4971 M [1] BOLT (M6X1X30-MM)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP27940122
 

127-2308: SEPARATOR GP-WATER

127-2308 SEPARATOR GP-WATER
S/N 4TF40050-UP
PART OF 140-3046 SEPARATOR GP-WATER
ALSO AN ATTACHMENT
i00753839 SEBP2794
1272308 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 3K-8460 [2] PLUG (1/2-20-THD)  
2. 117-4089 [1] ELEMENT-WATER SEPARATOR  
3. 118-1461 [1] BASE AS  
4. 118-8118 [1] RING-RETAINING  
5. 118-8119 [1] NUT  
6. 5P-7814 [2] SEAL-O-RING  
7. 112-9401 J [1] BOWL AS-WATER COLLECTION  
   
    AVAILABLE REPAIR KIT(S):
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES PLUGS, SEALS, RETAINING RING, & CAPS)
  128-8614 J [1] KIT-SEAL (WATER SEPARATOR)  
    (INCLUDES 5 SEALS)
  J   REPAIR KIT(S) MARKED J AVAILABLE FOR PART MARKED J
 

#SEBP27940123
 

140-3046: SEPARATOR GP-WATER

140-3046 SEPARATOR GP-WATER
S/N 4TF40050-UP
PART OF 147-1753, 147-1977 ENGINE AR
Type 1
ALSO AN ATTACHMENT
i00607984 SEBP2794
1403046 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 127-2308 Y [1] SEPARATOR GP-WATER  
2. 140-3042 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
3. 140-3043 [1] PLATE AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
4. 6V-8724 [2] ELBOW  
5. 3J-1907 [3] SEAL-O-RING  
6. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
7. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 140-3044 [1] TUBE AS  
11. 140-3045 [1] TUBE AS  
12. 8T-5043 [1] ADAPTER  
13. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
14. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
15. 9Y-1760 [1] BRACKET-PRIMING PUMP  
16. 2W-2605 [1] PUMP AS-FUEL PRIMING  
  1H-8171 [1] SEAL-O-RING  
  7E-5346 [2] VALVE AS  
17. 6V-2317 M [3] BOLT (M8X1.25X30-MM)  
18. 8T-0640 M [1] BOLT (M6X1X30-MM)  
19. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
20. 6V-7981 M [3] BOLT (M10X1.5X70-MM)  
21. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
22. 6V-8636 [1] CONNECTOR  
23. 1J-9671 [1] SEAL-O-RING  
24. 6V-8397 [4] SEAL-O-RING  
25. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
26. 8R-4100 [3] BOSS  
27. 3K-8460 [2] PLUG (1/2-20-THD)  
28. 5P-7814 [2] SEAL-O-RING  
29. 4W-2026 [1] COVER  
30. 135-9819 [1] SEAL-INTEGRAL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940124
 

140-3046: SEPARATOR GP-WATER

140-3046 SEPARATOR GP-WATER
S/N 4TF40050-UP
PART OF 147-1753, 147-1977 ENGINE AR
Type 2
ALSO AN ATTACHMENT
i01255862 SEBP2794
1403046 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 127-2308 Y [1] SEPARATOR GP-WATER  
2. 140-3042 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
3. 140-3043 [1] PLATE AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
4. 6V-8724 [2] ELBOW  
5. 3J-1907 [3] SEAL-O-RING  
6. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
7. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 183-2824 CY [1] PUMP GP-FUEL PRIMING (MANUAL)  
9. 140-3044 [1] TUBE AS  
10. 140-3045 [1] TUBE AS  
11. 8T-5043 [1] ADAPTER  
12. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
13. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
14. 9Y-1760 [1] BRACKET-PRIMING PUMP  
15. 6V-2317 CM [2] BOLT (M8X1.25X30-MM)  
16. 6V-7981 M [3] BOLT (M10X1.5X70-MM)  
17. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
18. 6V-8636 [1] CONNECTOR  
19. 1J-9671 [1] SEAL-O-RING  
20. 6V-8397 [4] SEAL-O-RING  
21. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
22. 8R-4100 [3] BOSS  
23. 3K-8460 [2] PLUG (1/2-20-THD)  
24. 5P-7814 [2] SEAL-O-RING  
25. 4W-2026 [1] COVER  
26. 135-9819 [1] SEAL-INTEGRAL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940125
 

151-3435: TANK GP-FUEL

151-3435 TANK GP-FUEL
S/N 2ZN1750-3466
PART OF 145-6433 CHASSIS AR
i00846443 SEBP2794
1513435 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 8Y-9222 [1] TANK AS  
2. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
3. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
4. 3W-7194 [1] SUPPORT AS  
  5F-7845 [2] BOSS (50.8-MM LG)  
5. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
6. 3W-8414 [1] BRACKET  
7. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
8. 5G-8653 [1] BRACKET AS  
9. 6V-8724 [2] ELBOW  
10. 3J-1907 [4] SEAL-O-RING  
11. 9S-4191 [1] PLUG (9/16-18-THD)  
12. 3W-7200 [1] TUBE AS  
13. 8T-0403 [1] CONNECTOR  
14. 6V-8397 [2] SEAL-O-RING  
15. 5P-9297 [3] CLIP (LOOP)  
16. 5M-3062 [3] BOLT (3/8-16X0.75-IN)  
17. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 8Y-9035 [1] SHAFT  
19. 6J-3134 [1] SEAL-O-RING  
20. 3W-8415 [1] STRAP  
21. 5G-3612 Y [1] CAP GP-PROTECTION  
22. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
23. 118-0691 J [1] SENDER AS-FUEL LEVEL  
  7N-7779 J [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 J [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 J [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
24. 1H-3337 [6] BOLT (1/4-20X0.875-IN)  
25. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 3E-5393 [1] GASKET  
27. 8T-4895 [2] WASHER (13.5X50X5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  139-8661 J [1] KIT-DIAL SENSOR  
    (INCLUDES 2 SCREWS)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940126
 

151-3435: TANK GP-FUEL

151-3435 TANK GP-FUEL
S/N 2ZN3467-UP
PART OF 145-6433 CHASSIS AR
i01361361 SEBP2794
1513435 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 3E-5393 [1] GASKET  
2. 3W-7194 [1] SUPPORT AS  
  5F-7845 [2] BOSS (50.8-MM LG)  
3. 3W-8414 [1] BRACKET  
4. 3W-8415 [1] STRAP  
5. 5G-3612 Y [1] CAP GP-PROTECTION  
6. 5G-8653 [1] BRACKET AS  
7. 8Y-9035 [1] SHAFT  
8. 8Y-9222 [1] TANK AS  
9. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
10. 157-0714 C [1] FLANGE  
11. 157-8844 CJ [1] SENSOR GP-LIQUID LEVEL (FUEL)  
  6C-3060 [1] GASKET  
12. 1H-3337 [6] BOLT (1/4-20X0.875-IN)  
13. 3J-1907 [2] SEAL-O-RING  
14. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
16. 6J-3134 [1] SEAL-O-RING  
17. 8T-4138 CM [6] BOLT (M6X1X20-MM)  
18. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
19. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
20. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4895 [2] WASHER (13.5X50X5-MM THK)  
22. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9X-8256 C [6] WASHER (6.6X12X2-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  317-9186 J [1] KIT-REPAIR (FUEL LEVEL GAUGE)  
    (INCLUDES SENSOR AS, SCREWS, RECEPTACLE KIT, & PINS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27940127
 

129-1101: VALVE GP-CHECK

129-1101 VALVE GP-CHECK
S/N 4TF40050-UP
PART OF 129-1102 BASE GP-FUEL FILTER
ALSO AN ATTACHMENT
i00702279 SEBP2794
1291101 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 033-6033 [1] SEAL-O-RING  
2. 6V-6923 [1] RING-BACKUP  
 

#SEBP27940128
 

3E-6328: ALARM GP

3E-6328 ALARM GP -ACTION
S/N 2ZN1750-UP
24-VOLT
PART OF 129-5343 ROPS GP-ENCLOSED, 133-3437 ROPS GP-OPEN
ALSO AN ATTACHMENT
i00358337 SEBP2794
3E6328 ALARM GP Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP27940129
 

107-7977: ALTERNATOR GP-CHARGING

107-7977 ALTERNATOR GP-CHARGING
S/N 4TF40050-UP
24 VOLT, 70 AMPERE
FIELD REPLACEMENT FOR @@@@@132-2156@@@@@
i00474753 SEBP2794
1077977 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 953C TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 1H-3244 [2] LOCKWASHER  
2. 6V-8187 [1] NUT (1/4-28-THD)  
3. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
5. 9L-6770 [1] CAP-DUST  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
8. 4B-2047 [1] NUT (10-24-THD)  
9. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
10. 8F-1434 [1] LOCKWASHER  
11. 3E-5450 [1] COVER  
12. 4B-2043 [4] NUT (8-32-THD)  
13. 9B-7233 [4] LOCKWASHER  
14. 3E-5448 [1] CONNECTOR  
15. 3E-5446 [1] CONNECTOR  
16. 3E-5457 [1] DIODE AS  
18. 7N-9023 [3] SCREW AS (8-32X26.9-MM)  
19. 3E-5460 [1] HOLDER AS-BRUSH  
20. 3E-5459 [2] BRUSH AS-ALTERNATOR  
21. 3N-3718 [2] SCREW AS  
22. 3E-5458 [1] CAPACITOR AS-ALTERNATOR  
23. 4M-5281 [1] BOLT (1/4-20X0.75-IN)  
24. 3E-5454 [1] FAN-ALTERNATOR (11-BLADE)  
25. 3E-5455 [1] HOUSING  
26. 5P-7807 [1] BALL BEARING  
27. 3E-5447 [1] PLATE  
28. 030-9612 [3] SCREW-FORMING (10-24X0.5-IN)  
29. 132-1222 [1] ROTOR AS-ALTERNATOR (24-VOLT)  
30. 132-1223 [1] STATOR AS-ALTERNATOR (24-VOLT)  
31. 132-1224 [1] FRAME AS-ALTERNATOR  
32. 5P-6920 [1] BEARING-ROLLER  
33. 132-1228 [1] KIT-ALTERNATOR TERMINAL (BATTERY)  
    (INCLUDES NUTS, TERMINAL, LOCKWASHER, INSULATOR & ADAPTER)
34. 132-1230 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (INCLUDES INSULATOR, WASHER, NUT & TERMINAL)
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2006/07/03
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23

Caterpillar Parts SIS Catalog 953C :

LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
LINES GP-FUEL FILTER
134-9521 LINES GP-FUEL FILTER
LINES GP-FUEL
143-9263 LINES GP-FUEL
390-9331 KIT-INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-7897 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
129-1209 GOVERNOR GP-UNIT INJECTOR
FILTER GP-FUEL
143-4689 FILTER GP-FUEL
PUMP GP-FUEL PRIMING
183-2824 PUMP GP-FUEL PRIMING
SEPARATOR GP-WATER
127-2308 SEPARATOR GP-WATER
SEPARATOR GP-WATER
140-3046 SEPARATOR GP-WATER
SEPARATOR GP-WATER
140-3046 SEPARATOR GP-WATER
TANK GP-FUEL
151-3435 TANK GP-FUEL
TANK GP-FUEL
151-3435 TANK GP-FUEL
VALVE GP-CHECK
129-1101 VALVE GP-CHECK
ALARM GP
3E-6328 ALARM GP

Truck sale:

Caterpillar 953C
 
Caterpillar 953C
- track loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 953C3, track loaders, Construction
47,419 
Caterpillar 953C3, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 953C, track loaders, Construction
57,500 
Caterpillar 953C, track loaders, Construction
- track loaders
NMC
Caterpillar 953C, track loaders, Construction
41,500 
Caterpillar 953C, track loaders, Construction
- track loaders
FOLEY, INC.
Caterpillar 953C, track loaders, Construction
39,500 
Caterpillar 953C, track loaders, Construction
- track loaders
OHIO CAT