AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

179-2569 WIRING GP-REAR S/N 7ZN214-UP PART OF 163-2977 CHASSIS AR 550 WHEEL HARVESTER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
PUMP GP
ARM GP-PENDULUM
MOTOR GP
BRAKE GP

WHEEL HARVESTER 550 WHEEL HARVESTER 7ZN
 550 Wheel Harvester 7ZN00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2803 550 7ZN   (1998)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-REAR
159-3723 WIRING GP-REAR
WIRING GP-REAR
179-2569 WIRING GP-REAR
WIRING GP-REAR
179-2569 WIRING GP-REAR
 

#SEBP28030170
 

179-2569: WIRING GP-REAR

179-2569 WIRING GP-REAR
S/N 7ZN214-UP
PART OF 163-2977 CHASSIS AR
i01739598 SEBP2803
1792569 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7377 [1] HARNESS AS-REAR CHASSIS  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  8T-8737 [7] PLUG-SEAL  
2. 164-7380 [1] HARNESS AS-REAR CHASSIS  
3. 164-7372 [1] HARNESS AS-REAR CHASSIS  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
4. 186-5035 Y [1] SUPPORT GP-WIRING HARNESS (REAR)  
5. 222-1482 C [1] HARNESS AS  
  3S-2093 [2] STRAP-CABLE  
  8T-8737 [7] PLUG-SEAL  
  9X-7147 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3490 [2] SEAL-CONNECTOR (40-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
6. 171-4479 [1] SUPPORT AS  
7. 186-5034 [1] GUARD AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
8. 8M-2773 [3] CLIP (LOOP)  
9. 174-7749 [1] HARNESS AS  
10. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
11. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
12. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
13. 114-3349 M [3] SCREW-PAN HEAD (M5X0.8X30-MM)  
14. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
15. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
16. 7D-7233 [3] CLIP  
17. 2V-3216 [2] CLIP  
18. 5C-9553 M [3] BOLT (M6X1X16-MM)  
19. 9X-6772 [12] STRAP-CABLE  
20. 8J-1256 [1] CLIP  
21. 6D-1641 [5] CLIP  
22. 164-7405 [1] CABLE AS  
23. 164-7406 [1] CABLE AS  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
26. 6V-4369 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28030171
 

183-5891: ACTUATOR GP-PUMP

183-5891 ACTUATOR GP-PUMP
S/N 7ZN1-UP
PART OF 155-9912 PUMP GP-PISTON
i01230730 SEBP2803
1835891 ACTUATOR GP-PUMP Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-5829 [2] NUT (M40X1.5-THD)  
2. 9T-4900 [3] PLUG  
3. 115-1518 [2] VALVE AS  
4. 132-2862 [1] LEVER AS  
5. 132-2863 [1] VALVE  
6. 132-2864 [2] SPRING (OUTER)  
7. 132-2865 [2] SPRING (INNER)  
8. 132-2866 B [2] RETAINER-SPRING  
9. 132-2867 B [2] RETAINER-SPRING  
10. 095-1581 [1] SEAL-O-RING  
11. 2M-9780 [1] SEAL-O-RING  
12. 3J-1907 [2] SEAL-O-RING  
13. 3E-8000 M [1] NUT-JAM (M16X1.5-THD)  
14. 6V-5393 [2] SEAL-O-RING  
15. 6V-9028 [1] SEAL-O-RING  
16. 7X-2619 M [1] BOLT (M6X1X10-MM)  
17. 7U-9224 [1] PLUG  
18. 8T-9532 M [2] SETSCREW-SOCKET (M8X1.25-THD)  
19. 9S-4191 [2] PLUG (9/16-18-THD)  
20. 9S-8006 [1] PLUG (7/8-14-THD)  
21. 9T-4593 [2] RETAINER  
22. 9T-4817 M [2] NUT (M8X1-THD)  
23. 9T-4867 [1] WASHER (6-MM IDX10-MM OD)  
24. 9T-4883 [2] PIN-ROLL  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28030172
 

163-2999: ARM GP-PENDULUM

163-2999 ARM GP-PENDULUM
S/N 7ZN1-UP
SHORT-REAR
PART OF 166-2637 ARM GP-PENDULUM
Type 1
i01034008 SEBP2803
1632999 ARM GP-PENDULUM Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 134-8273 M [8] SCREW-FLAT HEAD (M10X1.5X25-MM)  
3. 158-6923 [2] COVER  
4. 158-6937 [1] FRAME AS-PENDULUM ARM (LH)  
5. 158-6939 [1] FRAME AS-PENDULUM ARM (RH)  
6. 158-7211 [2] COVER  
7. 158-7212 [2] COVER  
8. 163-2158 [2] BEARING  
9. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
11. 8T-4175 M [98] BOLT (M16X2X90-MM)  
12. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
13. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9X-8257 [98] WASHER (17.5X30X3.5-MM THK)  
15. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
16. 9F-2247 [10] PLUG-PIPE  
  M   METRIC PART
 

#SEBP28030173
 

163-2999: ARM GP-PENDULUM

163-2999 ARM GP-PENDULUM
S/N 7ZN1-UP
SHORT-REAR
PART OF 166-2637 ARM GP-PENDULUM
Type 2
i01777935 SEBP2803
1632999 ARM GP-PENDULUM Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 134-8273 M [8] SCREW-FLAT HEAD (M10X1.5X25-MM)  
3. 158-6923 [2] COVER  
4. 158-6937 [1] FRAME AS-PENDULUM ARM (LH)  
5. 158-6939 [1] FRAME AS-PENDULUM ARM (RH)  
6. 158-7211 [2] COVER  
7. 158-7212 [2] COVER  
8. 163-2158 [2] BEARING  
9. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4139 CM [12] BOLT (M12X1.75X30-MM)  
11. 8T-4175 M [98] BOLT (M16X2X90-MM)  
12. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
13. 8T-4223 C [12] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 9X-8257 [98] WASHER (17.5X30X3.5-MM THK)  
15. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
16. 9F-2247 C [10] PLUG-PIPE  
17. 222-9101 C [2] STEP AS  
18. 222-8995 C [2] PLATE  
19. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28030174
 

163-3001: ARM GP-PENDULUM

163-3001 ARM GP-PENDULUM
S/N 7ZN1-UP
SHORT-FRONT
PART OF 166-2639 ARM GP-PENDULUM
Type 1
i01021476 SEBP2803
1633001 ARM GP-PENDULUM Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-8273 M [8] SCREW-FLAT HEAD (M10X1.5X25-MM)  
2. 158-6923 [2] COVER  
3. 158-6924 [1] FRAME AS-PENDULUM ARM (LH)  
4. 158-6934 [1] FRAME AS-PENDULUM ARM (RH)  
5. 158-7211 [2] COVER  
6. 158-7212 [2] COVER  
7. 163-2158 [2] BEARING  
8. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
10. 8T-4175 M [142] BOLT (M16X2X90-MM)  
11. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
12. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 9X-8257 [142] WASHER (17.5X30X3.5-MM THK)  
14. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
15. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
16. 9F-2247 [10] PLUG-PIPE  
  M   METRIC PART
 

#SEBP28030175
 

163-3001: ARM GP-PENDULUM

163-3001 ARM GP-PENDULUM
S/N 7ZN1-UP
SHORT-FRONT
PART OF 166-2639 ARM GP-PENDULUM
Type 2
i01777957 SEBP2803
1633001 ARM GP-PENDULUM Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-8273 M [8] SCREW-FLAT HEAD (M10X1.5X25-MM)  
2. 158-6923 [2] COVER  
3. 158-6924 [1] FRAME AS-PENDULUM ARM (LH)  
4. 158-6934 [1] FRAME AS-PENDULUM ARM (RH)  
5. 158-7211 [2] COVER  
6. 158-7212 [2] COVER  
7. 163-2158 [2] BEARING  
8. 8T-4121 C [12] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4139 CM [24] BOLT (M12X1.75X30-MM)  
10. 8T-4175 M [142] BOLT (M16X2X90-MM)  
11. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
12. 8T-4223 C [24] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 9X-8257 [142] WASHER (17.5X30X3.5-MM THK)  
14. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
15. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
16. 9F-2247 C [6] PLUG-PIPE  
17. 222-9101 C [2] STEP AS  
18. 222-8995 C [2] PLATE  
19. 218-8446 C [2] HANDRAIL  
20. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28030176
 

166-2637: ARM GP-PENDULUM

166-2637 ARM GP-PENDULUM
S/N 7ZN1-UP
SHORT-REAR
PART OF 163-2988 POWER TRAIN AR
i01034005 SEBP2803
1662637 ARM GP-PENDULUM Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-2676 Y [2] CYLINDER GP-PENDULUM ARM  
2. 163-2999 Y [1] ARM GP-PENDULUM (SHORT, REAR)  
3. 163-3004 Y [1] MOUNTING GP-CYLINDER  
4. 163-3005 Y [1] MOTOR & MTG GP-PROPEL  
5. 165-7072 Y [1] LINES GP-MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28030177
 

166-2639: ARM GP-PENDULUM

166-2639 ARM GP-PENDULUM
S/N 7ZN1-UP
SHORT-FRONT
PART OF 163-2988 POWER TRAIN AR
i01021594 SEBP2803
1662639 ARM GP-PENDULUM Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-2676 Y [2] CYLINDER GP-PENDULUM ARM  
2. 163-3001 Y [1] ARM GP-PENDULUM (SHORT, FRONT)  
3. 173-9127 Y [1] MOUNTING GP-CYLINDER  
4. 163-3005 Y [1] MOTOR & MTG GP-PROPEL  
5. 165-7075 Y [1] LINES GP-MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28030178
 

183-4874: BEARING GP-SELF-ALIGNING

183-4874 BEARING GP-SELF-ALIGNING
S/N 7ZN1-UP
LONG-REAR
PART OF 155-9918, 155-9919 MOTOR GP-PISTON
i01218294 SEBP2803
1834874 BEARING GP-SELF-ALIGNING Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-4875 [1] SUPPORT-BEARING  
2. 183-4876 [1] KIT-SHIM (INCLUDES 5 SHIMS)  
3. 183-4877 [1] SHAFT  
4. 183-4879 [1] KIT-STUD (INCLUDES 10 STUDS)  
5. 4C-2184 [1] SEAL GP  
6. 4C-2185 [1] BEARING  
7. 4C-2202 [1] BEARING  
8. 7R-3567 [1] WASHER  
9. 7R-3568 [1] RING  
 

#SEBP28030179
 

112-4063: BRAKE GP-SERVICE & PARKING

112-4063 BRAKE GP-SERVICE & PARKING
S/N 7ZN1-UP
LONG REAR
PART OF 155-9918, 155-9919 MOTOR GP-PISTON
i01218276 SEBP2803
1124063 BRAKE GP-SERVICE & PARKING Parts scheme
  For full view, you need register

Parts for your 550 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-4887 [1] BODY-BRAKE  
2. 104-5352 [1] SEAL-BRAKE SHAFT  
3. 112-2380 [1] KIT-BRAKE DISC  
4. 1C-7218 [2] WASHER  
5. 7R-3540 [1] PISTON  
6. 7R-3541 [12] WASHER  
7. 7R-3543 [1] SHAFT  
8. 7R-3544 [4] SPACER  
9. 188-9985 [1] COVER  
10. 225-9587 [1] PLUG-ORIFICE  
11. 7Y-5216 M [12] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
12. 8H-8257 [1] SEAL-O-RING  
13. 8T-4184 M [16] BOLT (M12X1.75X45-MM)  
14. 9X-6153 M [2] BOLT (M6X1X10-MM)  
15. 4D-4508 [1] SEAL-O-RING  
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 550 :

WIRING GP-REAR
179-2569 WIRING GP-REAR
WIRING GP-REAR
159-3723 WIRING GP-REAR
WIRING GP-FRONT
179-2570 WIRING GP-FRONT
WIRING GP-FRONT
179-2570 WIRING GP-FRONT
WIRING GP-FRONT
159-3721 WIRING GP-FRONT
WIRING GP-ENGINE
160-6398 WIRING GP-ENGINE
WIRING GP-CAB
179-3122 WIRING GP-CAB
WIRING GP-CAB
179-3122 WIRING GP-CAB
ACTUATOR GP-PUMP
183-5891 ACTUATOR GP-PUMP
ARM GP-PENDULUM
163-2999 ARM GP-PENDULUM
ARM GP-PENDULUM
163-2999 ARM GP-PENDULUM
ARM GP-PENDULUM
163-3001 ARM GP-PENDULUM
ARM GP-PENDULUM
163-3001 ARM GP-PENDULUM
ARM GP-PENDULUM
166-2637 ARM GP-PENDULUM
ARM GP-PENDULUM
166-2639 ARM GP-PENDULUM
BEARING GP-SELF-ALIGNING
183-4874 BEARING GP-SELF-ALIGNING

Truck sale:

Caterpillar APS550, Construction
154,000 
Caterpillar APS550, Construction
- mobile generator sets
MACALLISTER MACHINERY CO., INC
2011 CAT 550
USD $199,500 
2011 CAT 550

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
2011 CAT 550
USD $225,000 
2011 CAT 550

PONSSE USA INC
Rhinelander, Wisconsin
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.