AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

157-1395 FRAME GP-HARVESTER HEAD PART OF 152-1430 FRAME AR-HARVESTER HEAD HH75 HARVESTER HEAD


WORK TOOLS
FRAME GP
HEAD GP
SAW GP
ROLLER GP-FEED
ROTATOR GP
SAW GP

HARVESTER HEAD HH75 HARVESTER HEAD 5WZ
 HH75 Harvester Head 5WZ00001-UP (MACHINE) SEBP2816 HH75 5WZ   (1998)

WORK TOOLS

FRAME GP
152-1430 FRAME AR-HARVESTER HEAD
FRAME GP-HARVESTER HEAD
157-1395 FRAME GP-HARVESTER HEAD
 

#SEBP28160100
 

157-1395: FRAME GP-HARVESTER HEAD

157-1395 FRAME GP-HARVESTER HEAD
PART OF 152-1430 FRAME AR-HARVESTER HEAD
i00891295 SEBP2816
1571395 FRAME GP-HARVESTER HEAD Parts scheme 1571395 FRAME GP-HARVESTER HEAD Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9547 [2] NUT  
2. 155-9640 [33] WASHER  
3. 156-0070 [4] BEARING  
4. 156-0071 [2] WASHER (2-MM THK)  
5. 156-0080 [4] PIN  
6. 156-0082 [1] ROLLER AS (UPPER)  
7. 156-0084 [1] PIN  
8. 156-0085 [6] WASHER  
9. 156-0104 [1] ROLLER AS (LOWER)  
10. 156-0105 [1] PIN  
11. 156-0106 [2] SPACER (10-MM THK)  
12. 156-0111 [2] GUARD AS  
13. 156-0298 [2] WASHER (M8X1.25-THD)  
14. 156-2556 [1] GUARD AS-SENSOR  
15. 156-2563 [1] SLEEVE  
16. 157-2177 [1] HOLDER  
17. 157-2299 [1] FRAME AS-HARVESTER HEAD  
18. 157-2300 [2] PIN  
19. 157-2301 [1] KNIFE AS-DELIMBING (STATIONARY)  
  175-1422 [1] EDGE-CUTTING  
  175-1423 [1] EDGE-CUTTING  
20. 157-2302 [2] BEARING  
21. 157-2303 [2] CAP  
22. 157-2304 [1] KNIFE AS-DELIMBING (RH)  
  175-1409 [1] EDGE-CUTTING  
  175-1410 [1] EDGE-CUTTING  
  155-9545 [1] FITTING-GREASE  
  157-2306 [2] BUSHING  
23. 157-2305 [1] KNIFE AS-DELIMBING (LH)  
  175-1408 [1] EDGE-CUTTING  
  175-1410 [1] EDGE-CUTTING  
  155-9545 [1] FITTING-GREASE  
  157-2306 [2] BUSHING  
24. 157-2307 [2] BEARING  
25. 157-2308 B [6] SHIM (0.3-MM THK)(0.3MM THICK)  
26. 157-2309 B [6] SHIM (0.5-MM THK)(035MM THICK)  
27. 157-2310 B [6] SHIM (1-MM THK)(3.5MM THICK)  
28. 157-2312 B [6] RING-SUPPORT  
29. 157-2313 [1] ARM AS-HOLDING (RH)  
  164-0137 [2] BUSHING  
  175-1385 [1] EDGE-CUTTING  
  155-9545 [1] FITTING-GREASE  
30. 157-2314 [1] ARM AS-HOLDING (LH)  
  164-0137 [2] BUSHING  
  175-1385 [1] EDGE-CUTTING  
  155-9545 [1] FITTING-GREASE  
31. 157-2315 [2] PIN AS  
32. 157-2316 [1] PLATE  
33. 157-2317 [2] PIN  
34. 157-2319 [2] PIN AS  
35. 157-2322 [1] COVER  
36. 157-2323 [1] CAP  
37. 157-2324 [1] CAP  
38. 157-2325 [1] PLATE AS  
39. 157-2326 [1] PIPE AS (RH)  
40. 157-2327 [1] PIPE AS (LH)  
41. 157-3766 [1] GUARD  
42. 157-3767 [1] GUARD  
43. 157-3780 [1] CLAMP AS  
  3C-1887 M [1] SETSCREW-SOCKET (M8X1.25X12-MM)  
  3T-0849 M [2] BOLT-SOCKET HEAD (M6X1X25-MM)  
  096-3779 M [1] SETSCREW-SOCKET  
44. 157-3782 [1] CLAMP AS  
  3C-1887 M [2] SETSCREW-SOCKET (M8X1.25X12-MM)  
  3T-0849 M [2] BOLT-SOCKET HEAD (M6X1X25-MM)  
45. 163-1631 [1] PLATE  
46. 170-4856 [1] NUT  
47. 175-2777 [1] COVER AS  
48. 096-3779 M [2] SETSCREW-SOCKET  
49. 125-2117 M [2] BOLT-SOCKET HEAD (M24X3X70-MM)  
50. 131-3540 M [1] LOCKNUT (M8X1.25-THD)  
51. 6V-7688 M [2] LOCKNUT (M20X2.5-THD)  
52. 6V-8754 [2] RING-RETAINING  
53. 8T-0389 M [3] LOCKNUT (M10X1.15-THD)  
54. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
55. 8T-4137 M [12] BOLT (M10X1.5X20-MM)  
56. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
57. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
58. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
59. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
60. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
61. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
62. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
63. 8T-6870 M [1] BOLT (M8X1.25X70-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28160101
 

151-5317: HEAD AR-HARVESTER

151-5317 HEAD AR-HARVESTER
i01122269 SEBP2816
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] ARM GP-MEASURING  
  Y [1] FRAME AR-HARVESTER HEAD  
  155-8800 Y [1] DAMPER GP-HARVESTER HEAD  
  Y [1] HYDRAULIC AR-HARVESTER HEAD  
  Y [1] LUBRICATION AR  
  165-4116 Y [2] MOTOR GP-PISTON (FEED ROLLER)  
  Y [1] ROLLER GP-FEED (RH)  
  Y [1] ROLLER GP-FEED (LH)  
  163-3978 Y [1] ROTATOR GP-HYDRAULIC  
  Y [1] SAW AR-CHAIN  
    -OR-
  Y [1] SAW AR-CHAIN  
  163-1914 Y [1] TOOL GP-HAND  
  Y [1] WIRING GP-HARVESTER HEAD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28160102
 

156-5252: HOLDER GP-SAW BAR

156-5252 HOLDER GP-SAW BAR
PART OF 160-5444, 187-4710 TENSIONER GP-CHAIN
i01055515 SEBP2816
1565252 HOLDER GP-SAW BAR Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-1981 [4] SEAL-O-RING  
2. 156-5253 [1] KIT-PIN (CONTAINS 10 PIECES)  
3. 156-5254 [2] PLUG  
4. 156-5255 [1] WASHER AS  
4A. 156-5256 [1] KIT-SCREW  
4B. 157-1743 [2] NUT  
5. 095-1260 M [1] SETSCREW-SOCKET (M6X1X6-MM)  
  M   METRIC PART
 

#SEBP28160103
 

187-4714: HOUSING GP-CHAIN TENSIONER

187-4714 HOUSING GP-CHAIN TENSIONER
PART OF 187-4710 TENSIONER GP-CHAIN
i01430443 SEBP2816
1874714 HOUSING GP-CHAIN TENSIONER Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-0122 [1] FITTING-GREASE  
2. 8U-1981 [1] SEAL-O-RING  
3. 136-4192 M [4] BOLT (M6X1X35-MM)  
4. 156-5238 [1] BRACKET AS  
  095-0919 [1] RING-RETAINING  
5. 156-5239 [1] KIT-SHAFT  
6. 156-5241 [1] PISTON AS  
7. 156-5242 [1] PISTON AS  
8. 156-5243 [4] SEAL-RING  
9. 156-5244 [2] RING-GUIDE  
10. 156-5246 [1] BUSHING  
11. 156-5249 [1] SPRING AS  
12. 156-5250 [1] PLUG  
13. 156-5257 [1] PISTON AS  
  156-5258 [1] SEAL-RING  
14. 156-5259 [1] VALVE AS  
  087-4665 M [2] BOLT (M3X0.5X8-MM)  
  156-5261 [1] LEVER AS  
  172-4231 [2] SCREW  
  172-4232 [1] KIT-SEAL  
15. 156-5262 [1] SEAL-RING  
16. 156-5263 [1] BEARING  
17. 156-5278 [2] PIN  
18. 156-5279 [1] SEAL-O-RING  
19. 156-5280 [1] SEAL-RING  
20. 156-5281 [1] SEAL-O-RING  
21. 156-5288 [1] CAM AS  
22. 160-8285 [2] WASHER  
23. 178-2634 [1] PLUG AS  
  186-6540 [1] SEAL  
24. 095-1273 M [2] SETSCREW-SOCKET  
25. 096-3218 M [2] SETSCREW-SOCKET (M4X0.4X6-MM)  
26. 099-0822 M [1] BOLT-SOCKET HEAD (M5X0.8X10-MM)  
27. 3T-0849 M [2] BOLT-SOCKET HEAD (M6X1X25-MM)  
28. 6V-8236 [1] PIN-SPRING  
29. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
30. 8C-3097 [1] SEAL-O-RING  
31. 9W-3340 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP28160104
 

157-1389: ROLLER GP-FEED

157-1389 ROLLER GP-FEED -RH
S/N 5WZ1-244
PART OF 151-5317 HEAD AR-HARVESTER
i00891294 SEBP2816
1571389 ROLLER GP-FEED Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 157-1644 Y [1] ARM GP-FEED ROLLER (RH)  
3. 157-1648 [2] SCREW  
4. 157-1649 [1] SHAFT-RH  
5. 155-9547 [1] NUT  
6. 157-1652 [2] CAP AS  
7. 157-1653 [2] BALL  
8. 157-1655 [2] RETAINER-BALL  
9. 157-1656 [4] SPRING-CUP  
10. 160-6500 [2] CAP  
11. 157-1658 [10] BOLT  
12. Y [1] WHEEL GP-FEED ROLLER (RH)  
13. 157-1663 [6] NUT  
14. 157-1671 [1] PIN AS-PIVOT  
15. 9X-2089 [1] FITTING-LUBE  
16. 8T-4136 M [1] BOLT (M10X1.50X25MM)  
17. 155-9640 [1] WASHER (M10)  
18. 157-1673 [1] PIN  
19. 155-9569 [1] SPACER  
20. 8T-4195 M [1] BOLT (M10X1.50X30MM)  
21. 8T-0389 M [1] LOCKNUT (M10X1.5 THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28160105
 

157-1389: ROLLER GP-FEED

157-1389 ROLLER GP-FEED -RH
S/N 5WZ245-UP
PART OF 151-5317 HEAD AR-HARVESTER
i01106231 SEBP2816
1571389 ROLLER GP-FEED Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2089 [1] FITTING-LUBE  
2. 155-9547 [1] NUT  
3. 155-9569 [1] SPACER  
4. 155-9640 [1] WASHER (M10)  
5. 157-1644 Y [1] ARM GP-FEED ROLLER (RH)  
6. 157-1649 [1] SHAFT-RH  
7. 157-1652 C [1] CAP AS  
8. 157-1658 [10] BOLT  
9. 157-1671 [1] PIN AS-PIVOT  
10. 157-1673 [1] PIN  
11. 174-0261 CY [1] WHEEL GP-FEED ROLLER (RH)  
12. 174-0265 C [6] NUT  
13. 095-1276 CM [1] SETSCREW-SOCKET  
14. 8T-0389 M [1] LOCKNUT (M10X1.5 THD)  
15. 8T-4136 M [1] BOLT (M10X1.50X25MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28160106
 

157-1390: ROLLER GP-FEED

157-1390 ROLLER GP-FEED -LH
S/N 5WZ1-244
PART OF 151-5317 HEAD AR-HARVESTER
i00891270 SEBP2816
1571390 ROLLER GP-FEED Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 157-1645 Y [1] ARM GP-FEED ROLLER (LH)  
3. 157-1648 [2] SCREW  
4. 157-1650 [1] SHAFT-LH  
5. 155-9547 [1] NUT  
6. 157-1652 [2] CAP AS  
7. 157-1653 [2] BALL  
8. 157-1655 [2] RETAINER-BALL  
9. 157-1656 [4] SPRING-CUP  
10. 160-6500 [2] CAP  
11. 157-1658 [10] BOLT  
12. Y [1] WHEEL GP-FEED ROLLER (LH)  
13. 157-1663 [6] NUT  
14. 157-1671 [1] PIN AS-PIVOT  
15. 9X-2089 [1] FITTING-LUBE  
16. 8T-4136 M [1] BOLT (M10X1.50X25MM)  
17. 155-9640 [1] WASHER (M10)  
18. 157-1673 [1] PIN  
19. 155-9569 [1] SPACER  
20. 8T-4195 M [1] BOLT (M10X1.50X30MM)  
21. 8T-0389 M [1] LOCKNUT (M10X1.5 THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28160107
 

157-1390: ROLLER GP-FEED

157-1390 ROLLER GP-FEED -LH
S/N 5WZ245-UP
PART OF 151-5317 HEAD AR-HARVESTER
i01106106 SEBP2816
1571390 ROLLER GP-FEED Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2089 [1] FITTING-LUBE  
2. 155-9547 [1] NUT  
3. 155-9569 [1] SPACER  
4. 155-9640 [1] WASHER  
5. 157-1645 Y [1] ARM GP-FEED ROLLER (LH)  
6. 157-1650 [1] SHAFT-LH  
7. 157-1652 [1] CAP AS  
8. 157-1658 [10] BOLT  
9. 157-1671 [1] PIN AS-PIVOT  
10. 157-1673 [1] PIN  
11. 174-0262 CY [1] WHEEL GP-FEED ROLLER (LH)  
12. 174-0265 C [6] NUT  
13. 095-1276 CM [1] SETSCREW-SOCKET  
14. 8T-0389 M [1] LOCKNUT (M10X1.5 THD)  
15. 8T-4136 M [1] BOLT (M10X1.5X25MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28160108
 

163-3978: ROTATOR GP-HYDRAULIC

163-3978 ROTATOR GP-HYDRAULIC
PART OF 151-5317 HEAD AR-HARVESTER
i00988825 SEBP2816
1633978 ROTATOR GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0405 [2] SEAL-BONDED  
2. 6V-0408 [2] SEAL-BONDED  
3. 150-4542 [2] PLUG  
4. 150-4559 [12] SPRING  
5. 150-4561 [2] PIN-ROLL  
6. 150-4566 [2] VALVE  
7. 156-5025 [1] PLATE-UPPER STATOR  
8. 156-5026 [1] PLUG  
9. 156-5027 [1] SPRING  
10. 156-5028 [2] BALL  
11. 156-5030 [1] COVER  
12. 156-5037 [2] WASHER  
13. 156-5038 [1] BEARING AS-NEEDLE  
14. 156-5044 [2] BOLT (M20X100X12.9-MM)  
15. 156-5048 [1] LINK-LOWER  
16. 156-5049 [1] WEDGE  
17. 156-5050 [4] SPRING-CUP  
18. 156-5051 [1] SCREW  
19. 172-9906 [4] VANE  
20. 172-9907 [1] SHAFT-ROTATOR  
21. 172-9912 [1] FRAME-STATOR  
22. 172-9913 [1] PLATE (LOWER STATOR)  
23. 175-2373 [1] PLUG-MAGNETIC  
24. 129-3176 M [10] BOLT (M10X1.5X130-MM)  
25. 8T-0273 M [2] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
26. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
27. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 156-5039 B [1] KIT-SHIM (INCLUDES 4-SHIMS)  
29. 156-5054 [1] KIT-SEAL  
    (INCLUDES SEAL-O-RING, RING GLIDE, SEAL, RING SUPPORT & V RING)
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28160109
 

162-5644: SAW AR-CHAIN

162-5644 SAW AR-CHAIN
PART OF 151-5317 HEAD AR-HARVESTER
i01430255 SEBP2816
  For full view, you need register

Parts for your HH75 HARVESTER HEAD:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-9923 Y [1] MOTOR GP-SAW  
  155-8801 Y [1] SAW GP-CHAIN  
    -OR-
  187-8458 Y [1] SAW GP-CHAIN  
  Y [1] TENSIONER GP-CHAIN  
    -OR-
  187-4710 Y [1] TENSIONER GP-CHAIN  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Holding Arm Pivot Bearing - Lubricate
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head
Service Letter-NACD
Product Support Program For Repairing The Lower Roller That May Fall Off Certain HH75 Harvester Heads
Product Support Program For Repairing The Lower Roller That May Fall Off Certain HH75 Harvester Heads
Service Letter-CSARL
Specifications
Harvester Head Yoke
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System
Disassembly and Assembly
Delimbing Knife - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head
Delimbing Knife - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head
Lower Roller - Remove and Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head
Upper Roller - Remove and Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head
Holding Arm - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head
Holding Arm - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head
Service Magazine
New Protective Plates are Used on Harvester Heads {6320}
2000/04/10
A New Mounting Cover and a New Pin Improve Service Life of the Lower Roller Assembly {6320}
2000/07/03
Special Instruction, REHS1099 , "Installation Procedure for Installing New Bearings for the Diameter Sensors on Harvester Heads" is Available {6320}
2001/09/24
Correction to Disassembly and Assembly , "Delimbing Knife - Install" {6321}
2003/01/27
A New Guard for the Saw Motor Is Used on the Harvester Heads {5575, 7150}
2003/06/23
Improved Guarding for the Wiring of Diameter Sensors {1408, 6320}
2003/06/23

Caterpillar Parts SIS Catalog HH75 :

152-1430 FRAME AR-HARVESTER HEAD
DAMPER GP-HARVESTER HEAD
155-8800 DAMPER GP-HARVESTER HEAD
CONTROL GP-COLOR MARKING
166-4249 CONTROL GP-COLOR MARKING
CONTROL GP-COLOR MARKING
166-4249 CONTROL GP-COLOR MARKING
175-6843 CONTROL AR-COLOR MARKING
ARM GP-MEASURING
157-1391 ARM GP-MEASURING
175-6821 ARM GP-HOLDING
ARM GP-FEED ROLLER
157-1645 ARM GP-FEED ROLLER
151-5317 HEAD AR-HARVESTER
HOLDER GP-SAW BAR
156-5252 HOLDER GP-SAW BAR
HOUSING GP-CHAIN TENSIONER
187-4714 HOUSING GP-CHAIN TENSIONER
ROLLER GP-FEED
157-1389 ROLLER GP-FEED
ROLLER GP-FEED
157-1389 ROLLER GP-FEED
ROLLER GP-FEED
157-1390 ROLLER GP-FEED
ROLLER GP-FEED
157-1390 ROLLER GP-FEED
ROTATOR GP-HYDRAULIC
163-3978 ROTATOR GP-HYDRAULIC

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.