ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP28400260
134-7862: WIRING GP-COMBINED FLOW
134-7862 WIRING GP-COMBINED FLOW
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP
PART OF 134-1064, 163-1407 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP
PART OF 134-1064, 163-1407 CONTROL AR-AUXILIARY
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-2621 M | [1] | BOLT (M10X1.5X12-MM) | |
| 2. | 153-7794 | [1] | HARNESS AS | |
| 3. | 116-0118 | [5] | CLIP | |
| 4. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 5. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 111-4836 | [4] | CLIP | |
| 7. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 8. | 153-1149 | [1] | HARNESS AS | |
| 9. | 111-4787 | [1] | SWITCH AS-ROCKER (HYDRAULIC FLOW MODE) | |
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 116-0174 | [4] | TERMINAL | ||
| 10. | 133-0958 | [1] | HARNESS AS | |
| 11. | 6K-0806 | [3] | STRAP-CABLE | |
| 12. | 3S-2093 | [24] | STRAP-CABLE | |
| 13. | 3T-3132 | [1] | SWITCH AS-LIMIT | |
| 2H-3922 | [1] | LOCKWASHER (3/4 INTERNAL TOOTH) | ||
| 6V-8363 | [2] | SCREW (10-32X0.312-IN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 14. | 134-6475 | [1] | HARNESS AS | |
| 15. | 4D-1836 | [1] | SWITCH-TOGGLE | |
| 16. | 143-3421 | [1] | INDICATOR | |
| 17. | 145-7213 | [1] | HARNESS AS | |
| M | METRIC PART | |||
#SEBP28400261
134-7862: WIRING GP-COMBINED FLOW
134-7862 WIRING GP-COMBINED FLOW
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 134-1064, 151-5532, 163-1407, 203-0052 CONTROL AR-AUXILIARY, 151-7841 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 134-1064, 151-5532, 163-1407, 203-0052 CONTROL AR-AUXILIARY, 151-7841 CONVERSION AR-MACHINE
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-6475 | [1] | HARNESS AS | |
| 2. | 153-7794 | [1] | HARNESS AS | |
| 3. | 116-0118 | [6] | CLIP | |
| 4. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 5. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 111-4836 | [4] | CLIP | |
| 7. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 8. | 153-1149 | [1] | HARNESS AS | |
| 9. | 111-4787 | [1] | SWITCH AS-ROCKER (HYDRAULIC FLOW MODE) | |
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 116-0174 | [4] | TERMINAL | ||
| 133-0958 | [1] | HARNESS AS | ||
| 10. | 155-2698 | [1] | SWITCH AS-LIMIT | |
| 3E-3365 | WEDGE-RECEPTACLE LOCK (2-PIN) | |||
| 8T-8729 | PIN-CONNECTOR (16-GA TO 18-GA) | |||
| 102-8802 | KIT-RECEPTACLE (2-PIN)(KIT INCLUDES WEDGE) | |||
| 2H-3922 | [1] | LOCKWASHER (3/4 INTERNAL TOOTH) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 11. | 6K-0806 | [3] | STRAP-CABLE | |
| 12. | 3S-2093 | [24] | STRAP-CABLE | |
| 13. | HARNESS AS | |||
| 14. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 15. | 4D-1836 | [1] | SWITCH-TOGGLE | |
| 16. | 143-3421 | [1] | INDICATOR | |
| 17. | 145-7213 | [1] | HARNESS AS | |
| 18. | 170-8976 | [1] | FILM-INSTRUCTION | |
| M | METRIC PART | |||
#SEBP28400262
203-5404: WIRING GP-COMMUNICATION
203-5404 WIRING GP-COMMUNICATION
S/N 7JR1-UP; 1XS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PRODUCT LINK
PART OF 202-5521 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PRODUCT LINK
PART OF 202-5521 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-3118 | [1] | BRACKET | |
| 2. | 135-8575 | [1] | BOLT AS | |
| 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | ||
| 3. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 4. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 5. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 6. | 201-0577 Y | [1] | INSTALLATION AR-COMMUNICATION (PRODUCT LINK) | |
| 7. | 203-4531 | [1] | HARNESS AS | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 8. | 3S-2093 | [6] | STRAP-CABLE | |
| 9. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| 10. | 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | |
| 11. | 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28400263
122-1020: WIRING GP-CONSOLE
122-1020 WIRING GP-CONSOLE
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 132-0931 OPERATOR AR
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 132-0931 OPERATOR AR
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS#SEBP28400264
122-1033: WIRING GP-CONSOLE
122-1033 WIRING GP-CONSOLE
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
RH
PART OF 122-1020, 150-1438 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
RH
PART OF 122-1020, 150-1438 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-0421 | [1] | SWITCH AS-TOGGLE | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 2. | 110-7884 | [1] | SWITCH AS-TOGGLE (MOMENTARY) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3. | 119-5026 | [3] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 4. | 111-4788 | [1] | SWITCH AS | |
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 116-0174 | [5] | TERMINAL | ||
| 5. | 116-0082 | [4] | STRAP | |
| 6. | 121-1049 | [1] | BRACKET | |
| 7. | 163-6630 | [1] | PANEL AS-CONTROL | |
| 8. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 9. | 113-3453 | [1] | KNOB AS | |
| 10. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 11. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 12. | 106-0107 | [1] | SWITCH GP-ROTARY | |
| 13. | 175-3000 | [1] | HARNESS AS | |
| 14. | 106-0211 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 15. | 121-1160 | [1] | WASHER (25.5X34X1-MM THK) | |
| 16. | 113-0308 | [1] | SEAL-O-RING | |
| 17. | 125-4726 | [1] | CLIP | |
| 18. | 3S-2093 | [3] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28400265
122-1034: WIRING GP-CONSOLE
122-1034 WIRING GP-CONSOLE -LH
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 122-1020, 150-1437 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 122-1020, 150-1437 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 2. | 175-1317 | [1] | HARNESS AS | |
| 3. | 9W-1442 | [19] | FUSE (10-AMPERE) | |
| 4. | 9W-1441 | [5] | FUSE (15-AMPERE) | |
| 5. | 7Y-5493 | [1] | TOOL (FUSE PULLER) | |
| 6. | 111-4799 | [1] | SWITCH AS-LIMIT (NEUTRAL START) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 5P-5998 D | TUBE | |||
| 7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM)(M3X0.5 THD) | |
| 8. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 9. | 8T-9636 | [2] | FUSE (30-AMPERE) | |
| 10. | 116-0082 | [2] | STRAP | |
| 11. | 125-4726 | [1] | CLIP | |
| 12. | 3S-2093 | [14] | STRAP-CABLE | |
| 13. | 136-4731 | [1] | HARNESS AS-RADIO | |
| 14. | 111-4846 | [1] | CABLE | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP28400266
150-1437: WIRING GP-CONSOLE
150-1437 WIRING GP-CONSOLE
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 136-7824 OPERATOR AR-COLD WEATHER
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 136-7824 OPERATOR AR-COLD WEATHER
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS#SEBP28400267
150-1438: WIRING GP-CONSOLE
150-1438 WIRING GP-CONSOLE
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
WARMING WINDSHIELD
PART OF 150-1437 WIRING GP-CONSOLE
AN ATTACHMENT
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
WARMING WINDSHIELD
PART OF 150-1437 WIRING GP-CONSOLE
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS#SEBP28400268
116-0176: WIRING GP-FINE SWING
116-0176 WIRING GP-FINE SWING
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 121-5662, 121-5663, 121-5664, 121-5665, 125-8063, 146-0676, 202-5308, 202-5309, 202-5310, 202-5311, 202-5312 CHASSIS AR
S/N 7JR1-UP; 1XS1-UP; 2AS1-UP; 5MS1-UP; 9WS1-UP; 6LW1-UP; 3YZ1-UP
PART OF 121-5662, 121-5663, 121-5664, 121-5665, 125-8063, 146-0676, 202-5308, 202-5309, 202-5310, 202-5311, 202-5312 CHASSIS AR
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 2. | 111-4836 | [1] | CLIP | |
| 3. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 111-4837 | [2] | CLIP | |
| 5. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 6. | 116-0247 | [1] | HARNESS AS | |
| 7. | 7Y-8109 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 3S-2093 | [1] | STRAP-CABLE | |
| M | METRIC PART | |||
#SEBP28400269
165-0552: WIRING GP-HARVESTER HEAD
165-0552 WIRING GP-HARVESTER HEAD
S/N 9WS1-UP
PART OF 161-1606 INSTALLATION GP-HARVESTER HEAD
AN ATTACHMENT
S/N 9WS1-UP
PART OF 161-1606 INSTALLATION GP-HARVESTER HEAD
AN ATTACHMENT
Parts for your 320B EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 121-0129 | [1] | ACTUATOR | ||
| 165-0753 | [1] | CONNECTOR | ||
| 163-6131 | [1] | CONTROL GP-JOYSTICK (RH) | ||
| 163-6132 | [1] | CONTROL GP-JOYSTICK (LH) | ||
| 3K-8782 | [1] | FUSE (10-AMPERE) | ||
| 8D-8113 | [1] | FUSE (3-AMPERE) | ||
| 161-4165 | [1] | HARNESS AS | ||
| 161-4166 | [1] | HARNESS AS | ||
| 161-4167 | [1] | HARNESS AS | ||
| 161-4168 | [1] | HARNESS AS | ||
| 163-7335 | [1] | HARNESS AS | ||
| 163-7336 | [1] | HARNESS AS | ||
| 3E-5239 | [1] | RELAY AS (24-VOLT) | ||
| 3E-8770 | [1] | SWITCH AS (24-VOLT) | ||
| 7N-6545 | [3] | TERMINAL-SOCKET |
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Asia
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Testing and Adjusting
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Does Not Work - Troubleshoot - 420E And 2303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Electrical Components And Connector Locations
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Connector Contact Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Harness and Wire Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Troubleshooting
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Ground Cables In The Battery And Wiring Circuit Now Have Full Contact To Ground {7050,1408,7253}
1998/08/24
1998/08/24
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
1999/06/28
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}


