157-7325 LINES GP-PUMP -BULLDOZER S/N 6YZ1-UP PART OF 157-0823 HYDRAULIC AR D8R II TRACK-TYPE TRACTOR



HYDRAULIC SYSTEM
LINES GP-PUMP
LINES GP-RIPPER
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D8R II TRACK-TYPE TRACTOR 6YZ
 D8R Series II Track-Type Tractor 6YZ00001-UP (MACHINE) POWERED BY 3406E Engine SEBP2876 D8R II 6YZ   (2000)

HYDRAULIC SYSTEM

LINES GP-PUMP
LINES GP-PUMP
157-7325 LINES GP-PUMP
 

#SEBP28760670
 

157-7325: LINES GP-PUMP

157-7325 LINES GP-PUMP -BULLDOZER
S/N 6YZ1-UP
PART OF 157-0823 HYDRAULIC AR
i01021559 SEBP2876
1577325 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2B-7558 [1] CORK  
2. 3G-4783 [1] VALVE-BREAKER RELIEF (HYDRAULIC TANK)  
3. 5P-8502 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
4. 6V-0852 [1] CAP-DUST (HYDRAULIC PUMP FITTING)  
5. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
6. 8J-9990 [1] PLUG-ORIFICE  
7. 8T-4983 [2] CLAMP-HOSE  
8. 126-0814 [1] FITTING AS (SWIVEL)  
9. 148-8322 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  6V-8640 [1] CONNECTOR  
10. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
11. 150-4027 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  3E-2310 [1] TEE  
12. 160-2200 I [1] HOSE AS  
13. 160-2201 I [1] HOSE AS  
14. 160-2202 I [1] HOSE AS  
15. 160-2203 I [1] HOSE AS  
16. 160-2205 I [1] HOSE AS  
17. [1] BRACKET AS  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
  8F-9836 [1] BOSS (3/8-16-THD)  
  8K-7186 [1] NUT-WELD (7/16-14-THD)  
18. 162-3891 [1] TUBE AS  
19. 163-6475 [1] BRACKET  
20. 163-8824 I [1] HOSE AS  
21. 168-4528 [1] TUBE AS  
22. 196-0065 [1] PLATE AS  
  8K-7186 [2] NUT-WELD (7/16-14-THD)  
23. 196-0071 [1] TUBE AS  
24. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
25. 148-8391 [1] ELBOW AS  
  2S-4078 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-8987 [1] ELBOW  
26. 148-8433 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
27. 1P-3704 [2] SEAL-RECTANGULAR  
28. 1P-4578 [2] FLANGE-HALF  
29. 1P-4584 [4] FLANGE-HALF  
30. 1S-0994 [1] CLIP (LOOP)  
31. 3D-2824 [1] SEAL-O-RING  
32. 3G-6883 [1] CLIP (SLOT)  
33. 3G-6884 [1] CLIP (TAB)  
34. 3J-1907 [2] SEAL-O-RING  
35. 4J-0520 [2] SEAL-O-RING  
36. 4J-0522 [1] SEAL-O-RING  
37. 4L-6454 [2] BOLT (3/8-16X1-IN)  
38. 5F-3106 [1] SEAL-O-RING  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
41. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
42. 5P-7458 [1] CLIP (SLOT)  
43. 5P-7459 [1] CLIP (TAB)  
44. 5P-7468 [1] CLIP (SLOT)  
45. 5P-7469 [1] CLIP (TAB)  
46. 5P-8444 [1] GROMMET (37-MM ID)  
47. 6J-2680 [3] SEAL-O-RING  
48. 6V-0871 [1] GROMMET  
49. 6V-1867 [1] CLIP (SLOT)  
50. 6V-1868 [1] CLIP (TAB)  
51. 6V-1869 [1] GROMMET (65-MM ID)  
52. 6V-8188 [3] NUT (1/2-13-THD)  
53. 7X-0310 [8] BOLT (7/16-14X2-IN)  
54. 7X-0328 [2] BOLT (1/2-13X3.5-IN)  
55. 7X-0345 [2] BOLT (5/8-11X1.75-IN)  
56. 7X-0513 [3] WASHER-HARD (17X30X5-MM THK)  
57. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
58. 7X-3391 [2] WASHER-HARD (13.5X32X6-MM THK)  
59. 8C-4436 [2] BOLT (1/2-13X1.375-IN)  
60. 8T-1889 [1] CLIP (SLOT)  
61. 8T-1890 [1] CLIP (TAB)  
62. 8T-1895 [1] CLIP (SLOT)  
63. 8T-1896 [1] CLIP (TAB)  
64. 8T-4223 [15] WASHER-HARD (13.5X25.5X3-MM THK)  
65. 8T-4835 [6] BOLT (1/2-13X2-IN)  
66. 8T-5360 [15] WASHER (12X22.5X2.5-MM THK)  
67. 8T-8916 [4] BOLT (7/16-14X1.5-IN)  
68. 8T-8919 [7] BOLT (1/2-13X1.75-IN)  
69. 8T-9380 [3] BOLT (7/16-14X1-IN)  
70. 8T-9393 [3] BOLT (5/8-11X1.5-IN)  
71. 5P-2094 E HOSE (60CM)  
72. 5C-6565 [1] BOLT (1/2-13X1.125-IN)  
  A   NOT PART OF THIS GROUP
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP28760671
 

153-4846: LINES GP-RIPPER

153-4846 LINES GP-RIPPER -CYLINDERS
S/N 7NP1-UP; 7WP1-UP
PART OF 153-3130, 153-3131 RIPPER AR
AN ATTACHMENT
i01024510 SEBP2876
1534846 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9M-2904 [12] CLAMP-HOSE  
2. 130-1977 [12] SHIELD  
3. 130-9191 [6] GROMMET  
4. 139-2455 [2] SHIELD  
5. 139-2456 [2] SHIELD  
6. 162-0384 I [1] HOSE AS (RH)  
7. 162-0385 I [1] HOSE AS (LH)  
8. 162-0386 I [1] HOSE AS (RH)  
9. 162-0387 I [1] HOSE AS (RH)  
10. 162-0388 I [2] HOSE AS  
11. 4J-0520 [14] SEAL-O-RING  
12. 4J-5267 [2] SEAL-O-RING  
13. 170-1574 I [1] HOSE AS (LH)  
14. 170-1575 I [1] HOSE AS (LH)  
15. 8T-4186 M [12] BOLT (M10X1.5X40-MM)  
16. 190-1475 [2] SHIELD  
17. 482-7541 [6] GROMMET  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP28760672
 

157-8027: LINES GP-RIPPER

157-8027 LINES GP-RIPPER -CHASSIS
S/N 6YZ1-UP
PART OF 160-1806 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i01037720 SEBP2876
1578027 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 133-8269 [1] MANIFOLD  
2. 197-5469 [1] PLATE AS  
3. 197-7338 I [1] HOSE AS  
4. 197-7340 I [1] HOSE AS  
5. 197-7341 I [1] HOSE AS  
6. 1P-4577 [8] FLANGE-HALF  
7. 4J-0520 [16] SEAL-O-RING  
8. 5H-4019 [8] COVER  
9. 5S-7382 [16] BOLT (3/8-16X1.375-IN)  
10. 7G-5984 [2] CLIP (TAB)  
11. 7G-5985 [2] CLIP (SLOT)  
12. 7G-5986 [2] GROMMET  
13. 8C-3206 [16] FLANGE-HALF  
14. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
15. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4196 M [32] BOLT (M10X1.5X35-MM)  
17. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
20. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
21. 208-8101 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP28760673
 

115-6905: LINES GP-TILT CYLINDER

115-6905 LINES GP-TILT CYLINDER -BULLDOZER
S/N 9TP1-UP; 9WP1-UP
PART OF 159-1628, 159-1631 BULLDOZER AR-SEMI-UNIVERSAL, 159-1629, 159-1633 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00472115 SEBP2876
1156905 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 115-6931 I [1] HOSE AS  
2. 115-6930 I [1] HOSE AS  
3. 7T-9340 I [2] HOSE AS  
4. 7X-2559 M [2] BOLT (M16X2X160-MM)  
5. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
6. 8T-4121 [40] WASHER-HARD (11X21X2.5-MM THK)  
7. 9X-2027 [4] WASHER (11X18X2-MM THK)  
8. 8E-6183 [1] TUBE AS  
9. 7T-9333 [1] GUARD  
10. 8C-3205 [20] FLANGE-HALF  
11. 8T-4196 M [40] BOLT (M10X1.5X35-MM)  
12. 4J-5267 [13] SEAL-O-RING  
13. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
14. 8E-6184 [2] PLATE-COVER  
15. 5P-1076 [11] WASHER-HARD (13.5X30X4-MM THK)  
16. 7T-9341 I [2] HOSE AS  
17. 3G-7168 [1] GUARD  
18. 8T-6385 M [2] BOLT (M16X2X180-MM)  
19. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
20. 8T-4132 M [2] NUT (M16X2-THD)  
21. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
22. 6Y-1768 [1] GUARD AS  
23. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
24. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP28760674
 

119-5125: LINES GP-TILT CYLINDER

119-5125 LINES GP-TILT CYLINDER
S/N 6YZ1-UP
LANDFILL-BULLDOZER WITH HOSE GUARDS
PART OF 143-7722 WASTE HANDLING AR
AN ATTACHMENT
i00521349 SEBP2876
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  119-5154 EI [1] HOSE AS (97CM)  
    (90 DEGREE COUPLING EACH END)
  1Z-9398 [26] SPACER  
  3S-7166 [2] SLEEVE  
  6V-4675 [2] STEM AS-COLLET  
  119-5153 EI [1] HOSE AS (91CM)  
    (90 DEGREE COUPLING EACH END)
  1Z-9398 [24] SPACER  
  3S-7166 [2] SLEEVE  
  6V-4675 [2] STEM AS-COLLET  
  9Z-9246 EI [2] HOSE AS (84CM EACH)  
    (1-90 DEGREE & 1-60 DEGREE COUPLING)
  1Z-9398 [21] SPACER  
  3S-7166 [2] SLEEVE  
  6V-4675 [2] STEM AS-COLLET  
  6V-4668 [2] STEM AS  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP28760675
 

157-7326: LINES GP-TILT CYLINDER

157-7326 LINES GP-TILT CYLINDER -BULLDOZER
S/N 6YZ1-UP
PART OF 157-0823 HYDRAULIC AR
i01021612 SEBP2876
1577326 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8E-8916 [1] MANIFOLD  
2. 9W-3162 [1] BRACKET AS  
3. 132-5535 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
4. 160-1129 I [2] HOSE AS  
5. 1P-4576 [8] FLANGE-HALF  
6. 4J-0520 [2] SEAL-O-RING  
7. 4J-5267 [4] SEAL-O-RING  
8. 4L-6454 [2] BOLT (3/8-16X1-IN)  
9. 5C-6565 [4] BOLT (1/2-13X1.125-IN)  
10. 5H-4018 [2] COVER  
11. 5M-1932 [2] STUD-TAPERLOCK (1/2-13X2.17-IN)  
12. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 5S-7382 [16] BOLT (3/8-16X1.375-IN)  
14. 6V-8188 [2] NUT (1/2-13-THD)  
15. 7G-3832 [6] GROMMET  
16. 7G-3833 [6] CLIP (TAB)  
17. 7G-3834 [6] CLIP (SLOT)  
18. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
19. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4896 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 8T-8917 [6] BOLT (1/2-13X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP28760676
 

183-5405: LINES GP-TILT CYLINDER

183-5405 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1-1621
LANDFILL-BULLDOZER WITH HOSE GUARDS
AN ATTACHMENT
i01218531 SEBP2876
1835405 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9Z-9246 I [2] HOSE AS  
2. 183-5406 I [2] HOSE AS  
3. 183-5408 I [2] HOSE AS  
4. 183-5409 I [2] HOSE AS  
5. 183-5410 I [2] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP28760677
 

183-5405: LINES GP-TILT CYLINDER

183-5405 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1622-UP
LANDFILL-BULLDOZER WITH HOSE GUARDS
AN ATTACHMENT
i02047060 SEBP2876
1835405 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 239-9968 CI [2] HOSE AS  
2. 183-5406 I [2] HOSE AS  
3. 183-5408 I [2] HOSE AS  
4. 183-5409 I [2] HOSE AS  
5. 183-5410 I [2] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP28760678
 

201-5703: LINES GP-TILT CYLINDER

201-5703 LINES GP-TILT CYLINDER -BULLDOZER
S/N 9TP1-UP; 9WP1-UP
PART OF 159-1628, 159-1631 BULLDOZER AR-SEMI-UNIVERSAL, 159-1629, 159-1633 BULLDOZER AR-UNIVERSAL
Type 1
AN ATTACHMENT
i01497658 SEBP2876
2015703 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 7T-9333 [1] GUARD  
2. 7T-9341 I [2] HOSE AS  
3. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
4. 8E-6183 [1] TUBE AS  
5. 9W-2877 [3] CLAMP  
6. 158-6400 [2] TUBE AS  
7. [1] GUARD  
8. 199-7078 I [1] HOSE AS  
9. 199-7079 I [1] HOSE AS  
10. 201-5696 [2] GUARD  
11. 4J-5267 [9] SEAL-O-RING  
12. 5P-1076 [13] WASHER-HARD (13.5X30X4-MM THK)  
13. 7X-2559 M [2] BOLT (M16X2X160-MM)  
14. 8C-3205 [12] FLANGE-HALF  
15. 8T-4121 [27] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
17. 8T-4139 M [13] BOLT (M12X1.75X30-MM)  
18. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
19. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
20. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
21. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
22. 8T-4779 M [2] BOLT (M16X2X35-MM)  
23. 9X-2027 [4] WASHER (11X18X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP28760679
 

201-5703: LINES GP-TILT CYLINDER

201-5703 LINES GP-TILT CYLINDER -BULLDOZER
S/N 9TP1-UP; 9WP1-UP
PART OF 159-1628, 159-1631 BULLDOZER AR-SEMI-UNIVERSAL, 159-1629 BULLDOZER AR-UNIVERSAL
Type 2
AN ATTACHMENT
i02021565 SEBP2876
2015703 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 7T-9333 [1] GUARD  
2. 8E-6183 [1] TUBE AS  
3. 9W-2877 [3] CLAMP  
4. [1] GUARD  
5. 199-7078 I [1] HOSE AS  
6. 199-7079 I [1] HOSE AS  
7. 201-5696 [1] GUARD  
8. 239-3347 CI [2] HOSE AS  
10. 242-1695 C [2] TUBE AS  
11. 243-0582 C [1] GUARD  
12. 4J-5267 [9] SEAL-O-RING  
13. 5P-1076 C [12] WASHER-HARD (13.5X30X4-MM THK)  
14. 7X-2559 M [2] BOLT (M16X2X160-MM)  
15. 8C-3205 [12] FLANGE-HALF  
16. 8T-4121 [27] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
18. 8T-4139 CM [12] BOLT (M12X1.75X30-MM)  
19. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
20. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
21. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
22. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
23. 8T-4779 M [2] BOLT (M16X2X35-MM)  
24. 9X-2027 [4] WASHER (11X18X2-MM THK)  
25. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D8R II :

LINES GP-PIN PULLER CYLINDER
160-3619 LINES GP-PIN PULLER CYLINDER
LINES GP-PILOT
161-1014 LINES GP-PILOT
LINES GP-PILOT
157-8029 LINES GP-PILOT
LINES GP-PILOT
157-7329 LINES GP-PILOT
187-4658 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
158-6373 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
158-6373 LINES GP-HYDRAULIC
LINES GP-BULLDOZER MANIFOLD
157-7324 LINES GP-BULLDOZER MANIFOLD
LINES GP-RIPPER
153-4846 LINES GP-RIPPER
LINES GP-RIPPER
157-8027 LINES GP-RIPPER
LINES GP-TILT CYLINDER
115-6905 LINES GP-TILT CYLINDER
119-5125 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
157-7326 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
183-5405 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
183-5405 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
201-5703 LINES GP-TILT CYLINDER

Truck sale:

Caterpillar D8R II
 
Caterpillar D8R II
- Crawler dozers
FINNING CANADA
 
510.000 
Caterpillar D8R II, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
125.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung