154-5468 AXLE & MTG GP-DRIVE & STEERING S/N 1TR1284-1549; 2DR2717-3249 PART OF 154-5458, 154-5459, 154-5463, 154-5464 DRIVE AR-BACKHOE LOADER Type 2 AN ATTACHMENT 438C

POWER TRAIN

AXLE GP

0. 154-5468 AXLE & MTG
1. 154-5468 AXLE & MTG
2. 114-0165 AXLE & MTG

BRAKING SYSTEM

BRAKE GP

3. 119-8190 AXLE GP-DR
4. 154-5472 AXLE GP-DR
5. 174-6317 AXLE GP-DR
6. 156-2857 AXLE GP-RE

POWER TRAIN

WHEEL GP

7. 150-1281 CHART-WHEE
8. 150-4377 CHART-WHEE

OPERATOR STATION

CONTROL GP-TRANSMISSION

9. 179-6273 CONTROL AR
0. INFORMATION

BACKHOE LOADER 438C BACKHOE LOADER 1TR
438C Backhoe Loader Side Shift, Parallel Lift 1TR01284-01549 (MACHINE) POWERED BY 3054 Engine SEBP2885 438C 1TR (1996)

POWER TRAIN

AXLE GP

119-8191 AXLE & MTG GP-DRIVE & STEERING

154-5468 AXLE & MTG GP-DRIVE & STEERING

114-0165 AXLE & MTG GP-REAR

119-8190 AXLE GP-DRIVE & STEERING

#SEBP28850200

154-5468: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

154-5468 AXLE & MTG GP-DRIVE & STEERING
S/N 1TR1284-1549; 2DR2717-3249
PART OF 154-5458, 154-5459, 154-5463, 154-5464 DRIVE AR-BACKHOE LOADER
Type 2
AN ATTACHMENT

i01147704 SEBP2885

1545468 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-7082	[1]	WASHER (2.266X4X0.031-IN THK)
2.	8T-8549 M	[1]	LOCKNUT (M12X1.75-THD)
3.	165-8996	[2]	WASHER-THRUST (55.5X100.5X5-MM THK)
4.	9R-9702	[2]	WASHER (56X100X1.6-MM THK)
5.	112-9629	[1]	PIN
6.	113-8491	[1]	FUSE (15-AMPERE)
7.	174-6317 CY	[1]	AXLE GP-DRIVE & STEERING
8.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
9.	106-6568	[1]	SWITCH AS (AWD)
	111-7899	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28850201

154-5468: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

154-5468 AXLE & MTG GP-DRIVE & STEERING
S/N 1TR1284-1549; 2DR2717-3249
PART OF 154-5458, 154-5459, 154-5463, 154-5464 DRIVE AR-BACKHOE LOADER
Type 3
AN ATTACHMENT

i01147711 SEBP2885

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-7082	[1]	WASHER (2.266X4X0.031-IN THK)
2.	8T-8549 M	[1]	LOCKNUT (M12X1.75-THD)
3.	165-8996	[2]	WASHER-THRUST (55.5X100.5X5-MM THK)
4.	9R-9702	[2]	WASHER (56X100X1.6-MM THK)
5.	112-9629	[1]	PIN
6.	113-8491	[1]	FUSE (15-AMPERE)
7.	154-5472 CY	[1]	AXLE GP-DRIVE & STEERING
8.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
9.	106-6568	[1]	SWITCH AS (AWD)
	111-7899	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28850202

114-0165: AXLE & MTG GP-REAR

AXLE & MTG GP-REAR

114-0165 AXLE & MTG GP-REAR
S/N 2DR2717-3249
PART OF 154-5458, 154-5459 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00784958 SEBP2885

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT (FINAL DRIVE, AXLE)
2.	156-2857 CY	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28850203

119-8190: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

119-8190 AXLE GP-DRIVE & STEERING -REAR
S/N 1TR1284-1549
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

i00522471 SEBP2885

1198190 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	110-2462	[10]	SPRING
2.	8U-3591	[10]	SPACER (6.5X15X7-MM THK)
3.	7X-2619 M	[10]	BOLT (M6X1X10-MM)
4.	110-0878	[10]	PIN
5.	110-4748	[16]	NUT
6.	009-3819	[1]	CONE-BEARING
7.	110-0880	[2]	CARRIER-DISC
8.	110-4752 B	[4]	SHIM
9.	110-0876	[6]	SCREW
10.	1G-6735	[8]	PIN-GROOVED
11.	110-0877	[6]	PIN
12.	110-4736	[6]	RING
13.	110-0870	[10]	PLATE
14.	110-0842	[8]	DISC-FRICTION
15.	110-4757	[2]	RING
16.	110-4755	[2]	RING
17.	110-4756	[2]	RING
18.	110-4758	[2]	RING
19.	2D-9191	[1]	CONE-BEARING
20.	110-0158 B	[1]	RING (16-MM THK)
	110-0137 B	[1]	RING (17.4-MM THK)
	110-0138 B	[1]	RING (17.3-MM THK)
	110-0139 B	[1]	RING (17.2-MM THK)
	110-0140 B	[1]	RING (17.1-MM THK)
	110-0146 B	[1]	RING (16.92-MM THK)
	110-0150 B	[1]	RING (16.8-MM THK)
	110-0151 B	[1]	RING (16.7-MM THK)
	110-0152 B	[1]	RING (16.6-MM THK)
	110-0153 B	[1]	RING (16.5-MM THK)
	110-0154 B	[1]	RING (16.4-MM THK)
	110-0155 B	[1]	RING (16.3-MM THK)
	110-0156 B	[1]	RING (16.2-MM THK)
	110-0157 B	[1]	RING (16.1-MM THK)
	110-0142 B	[1]	RING (17.04-MM THK)
	110-0144 B	[1]	RING (16.98-MM THK)
	110-0148 B	[1]	RING (16.86-MM THK)
	193-1454 B	[1]	RING (16.66-MM THK)
	193-1455 B	[1]	RING (16.96-MM THK)
	193-1458 B	[1]	RING (17-MM THK)
	193-1460 B	[1]	RING (17.02-MM THK)
	193-1461 B	[1]	RING (17.06-MM THK)
	193-1462 B	[1]	RING (17.08-MM THK)
	193-1463 B	[1]	RING (17.12-MM THK)
	193-1464 B	[1]	RING (17.14-MM THK)
	193-1465 B	[1]	RING (17.16-MM THK)
	193-1466 B	[1]	RING (17.18-MM THK)
	193-1467 B	[1]	RING (17.22-MM THK)
	193-1469 B	[1]	RING (17.24-MM THK)
	193-1470 B	[1]	RING (17.26-MM THK)
	193-1471 B	[1]	RING (17.28-MM THK)
	225-5014 B	[1]	RING (16.56-MM THK)
	225-5015 B	[1]	RING (16.62-MM THK)
	225-5016 B	[1]	RING (16.64-MM THK)
	225-5017 B	[1]	RING (16.68-MM THK)
	225-5018 B	[1]	RING (16.72-MM THK)
	225-5024 B	[1]	RING (16.84-MM THK)
	225-5025 B	[1]	RING (16.88-MM THK)
	225-5026 B	[1]	RING (16.9-MM THK)
	225-5027 B	[1]	RING (16.94-MM THK)
	225-5019 B	[1]	RING (16.74-MM THK)
	225-5020 B	[1]	RING (16.76-MM THK)
	225-5021 B	[1]	RING (16.76-MM THK)
	225-5022 B	[1]	RING (16.78-MM THK)
	225-5023 B	[1]	RING (16.82-MM THK)
21.	110-0159 B	[2]	WASHER-THRUST (3-MM THK)
	110-0160 B	[2]	WASHER-THRUST (2.7-MM THK)
	110-0161 B	[2]	WASHER-THRUST (2.5-MM THK)
	110-0162 B	[2]	WASHER-THRUST (2.2-MM THK)
	110-0163 B	[2]	WASHER-THRUST (2-MM THK)
	110-0164 B	[2]	WASHER-THRUST (1.7-MM THK)
	110-0165 B	[2]	WASHER-THRUST (1.5-MM THK)
22.	5W-5547 B	[1]	DISC (1-MM THK)
	5W-5548 B	[1]	DISC (1.1-MM THK)
	5W-5549 B	[1]	DISC (1.2-MM THK)
	5W-5550 B	[1]	DISC (1.3-MM THK)
	5W-5551 B	[1]	DISC (1.4-MM THK)
	5W-5552 B	[1]	DISC (1.5-MM THK)
	5W-5553 B	[1]	DISC (1.6-MM THK)
	5W-5554 B	[1]	DISC (1.7-MM THK)
	5W-5555 B	[1]	DISC (1.05-MM THK)
	5W-5556 B	[1]	DISC (1.15-MM THK)
	5W-5557 B	[1]	DISC (1.25-M THK)
	5W-5558 B	[1]	DISC (1.35-MM THK)
	5W-5559 B	[1]	DISC (1.45-MM THK)
	5W-5560 B	[1]	DISC (1.55-MM THK)
	5W-5561 B	[1]	DISC (1.65-MM THK)
	5W-5562 B	[1]	DISC (1.75-MM THK)
	5W-6400 B	[1]	DISC (1.8-MM THK)
	8U-2752 B	[1]	DISC (0.7-MM THK)
	8U-2753 B	[1]	DISC (0.8-MM THK)
	8U-2754 B	[1]	DISC (0.9-MM THK)
23.	110-2461 M	[8]	BOLT (M16X1.5X100-MM)
24.	110-2457	[4]	PIN-SPRING
25.	110-2458	[4]	PIN-SPRING
26.	110-2467	[1]	SHAFT-DIFFERENTIAL
27.	213-9783	[6]	BEARING-ROLLER
28.	248-1017	[4]	WASHER-THRUST
29.	110-0855	[2]	GEAR-AXLE BEVEL
30.	110-0852	[2]	DISC-PRESSURE
31.	110-0854	[8]	DISC-FRICTION
32.	110-0853	[10]	PLATE
33.	253-9741	[1]	CASE-DIFFERENTIAL
34.	190-8591	[12]	WASHER (64.5X72.1X2-MM THK)
35.	213-9759	[4]	GEAR-BEVEL
36.	193-1132	[6]	GEAR-PLANETARY
37.	190-8590	[12]	RING-SNAP
38.	110-0867	[1]	HOUSING-AXLE DRIVE
39.	110-0883	[2]	HOUSING-BRAKE
40.	190-8567 B	[1]	SHIM (1-MM THK)
	190-8561 B	[1]	SHIM (0.6-MM THK)
	110-0124 B	[1]	SHIM (2-MM THK)
	110-0122 B	[1]	SHIM (1.8-MM THK)
	110-0121 B	[1]	SHIM (1.5-MM THK)
	110-0120 B	[1]	SHIM (1.2-MM THK)
	190-8566 B	[1]	SHIM (0.9-MM THK)
	190-8565 B	[1]	SHIM (0.8-MM THK)
	190-8563 B	[1]	SHIM (0.7-MM THK)
	5W-2073 B	[1]	SHIM (0.3-MM THK)
	5W-2074 B	[1]	SHIM (0.5-MM THK)
	5W-3644 B	[1]	SHIM (0.2-MM THK)
	5W-2072 B	[1]	SHIM (0.1-MM THK)
	193-1123 B	[1]	SHIM (0.75-MM THK)
	193-1124 B	[1]	SHIM (0.65-MM THK)
	193-1125 B	[1]	SHIM (0.1-MM THK)(0.1MM THK)
	193-1127 B	[1]	SHIM (0.15-MM THK)
	193-1128 B	[1]	WASHER (0.1-MM THK)
	193-1129 B	[1]	WASHER (0.15-MM THK)
	193-1130 B	[1]	WASHER (0.5-MM THK)
41.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
42.	110-4746	[1]	SEAL
43.	110-0856	[1]	CAP-PROTECTION
44.	113-5988	[1]	FLANGE
45.	110-4791	[1]	HOUSING-AXLE
46.	110-4749	[2]	PLUG
47.	110-2463	[1]	BEARING-ROLLER
48.	110-0180 B	[2]	WASHER (90X99.8X0.3-MM THK)
	6T-8671 B	[2]	SHIM (0.8-MM THK)
	6T-8672 B	[2]	SHIM (0.7-MM THK)
	6T-8673 B	[2]	SHIM (0.6-MM THK)
	6T-8674 B	[2]	SHIM (0.5-MM THK)
	6T-8675 B	[2]	SHIM (0.4-MM THK)
	110-0167 B	[2]	WASHER (90X99.8X0.85-MM THK)
	110-0168 B	[2]	WASHER (90X99.8X0.75-MM THK)
	110-0169 B	[2]	WASHER (90X99.8X0.65-MM THK)
	110-0170 B	[2]	WASHER (0.55-MM THK)
	110-0177 B	[2]	WASHER (90X99.8X0.45-MM THK)
	110-0178 B	[2]	WASHER (90X99.8X0.35-MM THK)
	110-0181 B	[2]	RING (2-MM THK)
	110-0182 B	[2]	RING (1.95-MM THK)
	110-0183 B	[2]	RING (1.9-MM THK)
	110-0184 B	[2]	RING (1.85-MM THK)
	098-2961 B	[2]	SHIM (1.7-MM THK)
	098-2962 B	[2]	SHIM (1.8-MM THK)
	098-2959 B	[2]	SHIM (1.5-MM THK)
	098-2960 B	[2]	SHIM (1.6-MM THK)
	098-2957 B	[2]	SHIM (1.3-MM THK)
	098-2958 B	[2]	SHIM (1.4-MM THK)
	6T-8668 B	[2]	SHIM (1.2-MM THK)
	6T-8669 B	[2]	SHIM (1.1-MM THK)
	6T-8670 B	[2]	SHIM (1-MM THK)
	110-0191 B	[2]	RING (1.25-MM THK)
	110-0192 B	[2]	RING (1.15-MM THK)
	110-0193 B	[2]	RING (1.05-MM THK)
	110-0194 B	[2]	RING (0.95-MM THK)
	110-0195 B	[2]	RING (0.9-MM THK)
49.	110-0875	[2]	PISTON
50.	110-4753	[2]	BEARING
51.	008-1902	[2]	CONE-BEARING
52.	110-4790	[1]	HOUSING-AXLE
53.	110-4792	[1]	HOUSING-BRAKE (LH)
	110-4793	[1]	HOUSING-BRAKE (RH)
54.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
55.	110-0134 B	[1]	SHIM (0.4-MM THK)
	110-0131 B	[1]	SHIM (1-MM THK)
	110-0132 B	[1]	SHIM (0.8-MM THK)
	110-0133 B	[1]	SHIM (0.6-MM THK)
	B	[1]	SHIM (0.3-MM THK)
	110-0136 B	[1]	SHIM (0.2-MM THK)
	110-0126 B	[1]	SHIM (2-MM THK)
	110-0127 B	[1]	SHIM (1.8-MM THK)
	110-0128 B	[1]	SHIM (1.6-MM THK)
56.	110-0859	[2]	PIN-BEARING
57.	096-9988 M	[8]	BOLT (M14X2X30-MM)
58.	9R-6947	[2]	SEAL-O-RING
59.	9R-6952	[2]	CAP-SEALING
60.	110-0884	[2]	HUB
61.	110-0874	[20]	BOLT-WHEEL
62.	110-4745	[2]	SEAL-O-RING
63.	110-2464	[4]	BEARING-ROLLER
64.	110-0866	[2]	CARRIER-PLANETARY
65.	110-0862	[2]	GEAR-RING
66.	098-2996	[4]	SEAL-O-RING
67.	6S-3051	[2]	CUP-BEARING
68.	110-4737	[6]	RING-RETAINING
69.	4D-8648	[2]	CUP-BEARING
70.	110-0865	[2]	SHAFT-SUN GEAR
71.	009-3818	[1]	CUP-BEARING
72.	110-0846	[2]	RING-RETAINING
73.	2D-9190	[1]	CUP-BEARING
74.	110-0863	[2]	WASHER-THRUST
75.	110-0844	[2]	WASHER-THRUST
76.	110-0849	[2]	NUT-SLOTTED
77.	110-0861	[2]	WASHER-TAB
78.	9R-6965 M	[4]	SCREW (M10X1.5X20-MM)
79.	110-0851	[2]	SEAL
80.	110-0850	[4]	SEAL
81.	110-0839	[2]	BUSHING
82.	110-0864	[2]	RING-RETAINING
83.	110-2460 M	[4]	BOLT (M12X1.5X95-MM)
84.	8T-6385 M	[32]	BOLT (M16X2X180-MM)
85.	110-2455 M	[4]	BOLT (M12X1.5X20-MM)
86.	110-4733	[2]	UNIVERSAL JOINT
87.	8T-4779 M	[8]	BOLT (M16X2X35-MM)
88.	110-0860	[2]	PIN-BEARING
89.	130-2703	[1]	GEAR SET
90.	110-0843	[1]	WASHER (31X56X6-MM THK)
91.	110-0848 M	[1]	NUT (M30X1.5-THD)
92.	110-2456	[4]	PIN-SPRING
93.	110-0840	[2]	TIE ROD
94.	110-0871	[1]	GUIDE
95.	110-0847	[1]	PLUG-SCREW
96.	9R-6953	[6]	SEAL-O-RING
97.	109-4440	[5]	PLUG
98.	110-0841	[1]	ROD-PISTON
99.	110-4754	[1]	GASKET
100.	110-4759	[2]	GUIDE-PISTON
101.	110-0873	[1]	CYLINDER
102.	110-4742	[2]	SEAL-O-RING
103.	110-4739	[12]	RING-SNAP
104.	110-4735	[4]	RING-GUIDE
105.	5W-6392	[2]	SEAL-O-RING
106.	5W-6391	[2]	SCRAPER
107.	110-0872	[1]	GUIDE
108.	110-2459 M	[8]	BOLT (M14X2X105-MM)
109.	6V-2652	[2]	CONE-BEARING
110.	110-0858	[2]	CAP-SEALING
111.	110-4743	[2]	SEAL-O-RING
112.	9R-3171	[4]	FITTING
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP28850204

154-5472: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N 1TR1284-1549; 2DR2717-3249
PART OF 154-5468 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

i00985303 SEBP2885

1545472 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-5698	[1]	HOUSING (RH)
2.	119-7056	[1]	HOUSING (LH)
3.	9R-3175	[1]	PLUG
5.	130-7008 B	[2]	SHIM (0.2-MM THK)
	130-7009 B	[2]	SHIM (0.3-MM THK)
	130-7010 B	[2]	SHIM (0.4-MM THK)
	130-7011 B	[2]	SHIM (0.6-MM THK)
	130-7012 B	[2]	SHIM (0.8-MM THK)
	130-7013 B	[2]	SHIM (1-MM THK)
	130-7015 B	[2]	SHIM (1.6-MM THK)
	130-7017 B	[2]	SHIM (2-MM THK)
6.	9X-0796	[3]	SEAL-O-RING
7.	130-2998	[2]	BUSHING
8.	130-6877	[2]	SEAL
9.	154-5404	[2]	BEARING
10.	9R-3168 M	[4]	SCREW (M10X1.5X20-MM)
11.	119-7061	[2]	PLUG
12.	130-6878	[6]	RING
13.	169-4161	[6]	CONE-BEARING
14.	169-4162	[6]	CONE-BEARING
15.	169-4160	[6]	GEAR
16.	130-7027	[2]	CARRIER
17.	119-7042	[2]	SHAFT
18.	119-7040	[2]	GEAR-RING
19.	130-3007	[2]	NUT
20.	119-7060 M	[2]	SCREW-STOP (M14X1.5X50-MM)
21.	130-7047	[16]	STUD
22.	130-3008 M	[16]	BOLT (M10X1.5X45-MM)
23.	2S-0480	[4]	CUP-TAPERED ROLLER
24.	178-8608	[4]	CONE-TAPERED
25.	130-6879	[2]	SEAL
26.	9X-0640	[2]	SEAL-O-RING
27.	130-3014 Y	[1]	SHAFT GP-DRIVE (LH)
28.	130-3013 Y	[1]	SHAFT GP-DRIVE (RH)
29.	054-6589	[2]	CLIP
30.	119-7045	[2]	SEAL
31.	7X-5771	[2]	RING-RETAINING
32.	131-3816	[2]	RING
33.	119-7053	[2]	FLANGE
34.	5P-9439	[2]	BALL BEARING
35.	130-6677	[16]	BOLT (M12X1.75X30-MM)
36.	130-7026	[2]	PIN
37.	119-7038	[2]	PIN
38.	119-7047	[2]	SEAL
39.	119-7046	[2]	SEAL
40.	031-0426	[2]	CUP-BEARING
41.	077-3918	[2]	BEARING
42.	119-7057	[1]	HOUSING (RH)
43.	130-7031	[1]	HOUSING (LH)
44.	054-6459 B	[1]	SHIM (1-MM THK)
	054-6460 B	[1]	SHIM (1.05-MM THK)
	054-6461 B	[1]	SHIM (1.1-MM THK)
	054-6462 B	[1]	SHIM (1.15-MM THK)
	054-6463 B	[1]	SHIM (1.2-MM THK)
	054-6464 B	[1]	SHIM (1.25-MM THK)
	054-6465 B	[1]	SHIM (1.3-MM THK)
	054-6466 B	[1]	SHIM (1.35-MM THK)
	054-6467 B	[1]	SHIM (1.4-MM THK)
	054-6468 B	[1]	SHIM (1.45-MM THK)
	054-6469 B	[1]	SHIM (1.5-MM THK)
	054-6470 B	[1]	SHIM (1.55-MM THK)
	054-6471 B	[1]	SHIM (1.6-MM THK)
	054-6472 B	[1]	SHIM (0.95-MM THK)
	054-6473 B	[1]	SHIM (0.9-MM THK)
	054-6474 B	[1]	SHIM (0.65-MM THK)
	054-6475 B	[1]	SHIM (0.7-MM THK)
	054-6476 B	[1]	SHIM (0.75-MM THK)
	054-6477 B	[1]	SHIM (0.85-MM THK)
	130-3850 B	[1]	SHIM (0.8-MM THK)
45.	130-6689 B	[1]	RING (15.1-MM THK)
	130-6690 B	[1]	RING (15.2-MM THK)
	130-6691 B	[1]	RING (15.26-MM THK)
	130-6693 B	[1]	RING (15.3-MM THK)
	130-6694 B	[1]	RING (15.33-MM THK)
	130-6695 B	[1]	RING (15.36-MM THK)
	130-6696 B	[1]	RING (15.38-MM THK)
	130-6697 B	[1]	RING (15.4-MM THK)
	130-6698 B	[1]	RING (15.43-MM THK)
	130-6699 B	[1]	RING (15.46-MM THK)
	130-6701 B	[1]	RING (15.48-MM THK)
	130-6702 B	[1]	RING (15.5-MM THK)
	130-6703 B	[1]	RING (15.53-MM THK)
	130-6704 B	[1]	RING (15.56-MM THK)
	130-6705 B	[1]	RING (15.58-MM THK)
	130-6706 B	[1]	RING (15.6-MM THK)
	130-6707 B	[1]	RING (15.63-MM THK)
	130-6708 B	[1]	RING (15.66-MM THK)
	130-6709 B	[1]	RING (15.68-MM THK)
	130-6710 B	[1]	RING (15.7-MM THK)
	130-6711 B	[1]	RING (15.73-MM THK)
46.	130-6712 B	[1]	RING (15.8-MM THK)
	130-6713 B	[1]	RING (15.83-MM THK)
	130-6714 B	[1]	RING (15.86-MM THK)
	130-6715 B	[1]	RING (15.9-MM THK)
	130-6716 B	[1]	RING (15.93-MM THK)
	130-6718 B	[1]	RING (15.96-MM THK)
	130-6719 B	[1]	RING (16-MM THK)
	130-6720 B	[1]	RING (16.03-MM THK)
	130-6721 B	[1]	RING (16.06-MM THK)
	130-6722 B	[1]	RING (16.1-MM THK)
	130-6724 B	[1]	RING (16.13-MM THK)
	130-6725 B	[1]	RING (16.16-MM THK)
	130-6726 B	[1]	RING (16.2-MM THK)
	130-6727 B	[1]	RING (16.23-MM)
	130-6728 B	[1]	RING (16.26-MM THK)
	130-6729 B	[1]	RING (16.3-MM THK)
	130-6731 B	[1]	RING (16.4-MM THK)
	130-6732 B	[1]	RING (16.76-MM THK)
47.	130-6798 B	[2]	SHIM (1-MM THK)
	130-6799 B	[2]	WASHER (1.05-MM THK)
	130-6800 B	[2]	SHIM (1.1-MM THK)
	130-6801 B	[2]	WASHER (62.2X75X1.15-MM THK)
	130-6802 B	[2]	WASHER (62.2X75X1.2-MM THK)
	130-6803 B	[2]	WASHER (62.2X75X1.25-MM THK)
	130-6804 B	[2]	SHIM (1.3-MM THK)
	130-6805 B	[2]	SHIM (1.35-MM THK)
	130-6806 B	[2]	SHIM (1.4-MM THK)
	130-6807 B	[2]	WASHER (1.45-MM THK)
	130-6808 B	[2]	SHIM (1.5-MM THK)
	130-6809 B	[2]	SHIM (1.55-MM THK)
	130-6810 B	[2]	SHIM (1.6-MM THK)
	130-6811 B	[2]	SHIM (1.65-MM THK)
	130-6812 B	[2]	SHIM (1.7-MM THK)
	130-6813 B	[2]	SHIM (1.75-MM THK)
	130-6814 B	[2]	SHIM (1.8-MM THK)
	130-6815 B	[2]	SHIM (1.85-MM THK)
	130-6816 B	[2]	SHIM (1.9-MM THK)
	130-6817 B	[2]	WASHER (62.2X75X1.95-MM THK)
	130-6818 B	[2]	WASHER (62.2X75X2-MM THK)
	130-6819 B	[2]	WASHER (62.2X75X2.05-MM THK)
	130-6820 B	[2]	SHIM (2.1-MM THK)
48.	130-6673	[1]	PLUG
49.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
50.	6V-3303 M	[15]	BOLT (M16X2X60-MM)
51.	178-7190 Y	[1]	CYLINDER GP-STEERING
52.	6V-2200	[2]	CUP-BEARING
53.	003-7501	[2]	CONE-BEARING
54.	130-6675	[1]	PIN
55.	082-3077	[4]	PIN
56.	130-3010	[4]	PIN (13.5MM DIA)
57.	105-3484 M	[12]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
58.	119-7036	[1]	PIN
59.	9R-6994	[2]	WASHER-THRUST
60.	128-7855	[2]	GEAR-PINION
61.	107-5608	[1]	GEAR SET-BEVEL
62.	130-3000 M	[2]	WASHER (53.2X71.9X1.9-MM THK)
63.	130-7048 B	[2]	RING (13.5-MM THK)
	130-7049 B	[2]	RING (13.6-MM THK)
	130-7050 B	[2]	RING (13.7-MM THK)
64.	130-7024	[1]	CASE
65.	130-3005 M	[1]	NUT (M24X2-THD)
66.	054-6480	[1]	DISC
67.	130-7028	[1]	PLATE
68.	130-7046	[1]	FLANGE
69.	055-1986	[1]	SEAL-LIP TYPE
70.	6S-3051	[3]	CUP-BEARING
71.	008-1902	[3]	CONE-BEARING
72.	119-7035	[2]	GEAR
73.	130-3809	[1]	TIE ROD AS (RH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6880	[1]	BALL JOINT
	130-7043	[1]	JOINT
74.	130-3012	[1]	TIE ROD AS (LH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6881	[1]	BALL JOINT
	130-7043	[1]	JOINT
75.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
76.	154-5405	[2]	SEAL-LIP TYPE
77.	054-6847	[1]	SEAL-O-RING
78.	054-6526	[15]	DISC
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28850205

174-6317: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

174-6317 AXLE GP-DRIVE & STEERING
S/N 1TR1284-1549; 2DR2717-3249
14.62 RATIO. DRIVE AND STEER
PART OF 154-5468 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

i01147722 SEBP2885

1746317 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-3999	[2]	CAP-PLUG
2.	130-3809	[1]	TIE ROD AS (RH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6880	[1]	BALL JOINT
	130-7043	[1]	JOINT
3.	130-3012	[1]	TIE ROD AS (LH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6881	[1]	BALL JOINT
	130-7043	[1]	JOINT
4.	130-3011 Y	[1]	CYLINDER GP-STEERING
5.	130-3850 B	[1]	SHIM (0.8-MM THK)
	054-6459 B	[1]	SHIM (1-MM THK)
	054-6460 B	[1]	SHIM (1.05-MM THK)
	054-6461 B	[1]	SHIM (1.1-MM THK)
	054-6462 B	[1]	SHIM (1.15-MM THK)
	054-6463 B	[1]	SHIM (1.2-MM THK)
	054-6464 B	[1]	SHIM (1.25-MM THK)
	054-6465 B	[1]	SHIM (1.3-MM THK)
	054-6466 B	[1]	SHIM (1.35-MM THK)
	054-6467 B	[1]	SHIM (1.4-MM THK)
	054-6468 B	[1]	SHIM (1.45-MM THK)
	054-6469 B	[1]	SHIM (1.5-MM THK)
	054-6470 B	[1]	SHIM (1.55-MM THK)
	054-6471 B	[1]	SHIM (1.6-MM THK)
	054-6472 B	[1]	SHIM (0.95-MM THK)
	054-6473 B	[1]	SHIM (0.9-MM THK)
	054-6474 B	[1]	SHIM (0.65-MM THK)
	054-6475 B	[1]	SHIM (0.7-MM THK)
	054-6476 B	[1]	SHIM (0.75-MM THK)
	054-6477 B	[1]	SHIM (0.85-MM THK)
6.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
7.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
8.	130-6689 B	[1]	RING (15.1-MM THK)
	130-6690 B	[1]	RING (15.2-MM THK)
	130-6691 B	[1]	RING (15.26-MM THK)
	130-6693 B	[1]	RING (15.3-MM THK)
	130-6694 B	[1]	RING (15.33-MM THK)
	130-6695 B	[1]	RING (15.36-MM THK)
	130-6696 B	[1]	RING (15.38-MM THK)
	130-6697 B	[1]	RING (15.4-MM THK)
	130-6698 B	[1]	RING (15.43-MM THK)
	130-6699 B	[1]	RING (15.46-MM THK)
	130-6701 B	[1]	RING (15.48-MM THK)
	130-6702 B	[1]	RING (15.5-MM THK)
	130-6703 B	[1]	RING (15.53-MM THK)
	130-6704 B	[1]	RING (15.56-MM THK)
	130-6705 B	[1]	RING (15.58-MM THK)
	130-6706 B	[1]	RING (15.6-MM THK)
	130-6707 B	[1]	RING (15.63-MM THK)
	130-6708 B	[1]	RING (15.66-MM THK)
	130-6709 B	[1]	RING (15.68-MM THK)
	130-6710 B	[1]	RING (15.7-MM THK)
	130-6711 B	[1]	RING (15.73-MM THK)
	130-6712 B	[1]	RING (15.8-MM THK)
	130-6713 B	[1]	RING (15.83-MM THK)
	130-6714 B	[1]	RING (15.86-MM THK)
	130-6715 B	[1]	RING (15.9-MM THK)
	130-6716 B	[1]	RING (15.93-MM THK)
	130-6718 B	[1]	RING (15.96-MM THK)
	130-6719 B	[1]	RING (16-MM THK)
	130-6720 B	[1]	RING (16.03-MM THK)
	130-6721 B	[1]	RING (16.06-MM THK)
	130-6722 B	[1]	RING (16.1-MM THK)
	130-6724 B	[1]	RING (16.13-MM THK)
	130-6725 B	[1]	RING (16.16-MM THK)
	130-6726 B	[1]	RING (16.2-MM THK)
	130-6727 B	[1]	RING (16.23-MM)
	130-6728 B	[1]	RING (16.26-MM THK)
	130-6729 B	[1]	RING (16.3-MM THK)
	130-6731 B	[1]	RING (16.4-MM THK)
	130-6732 B	[1]	RING (16.76-MM THK)
9.	107-5608	[1]	GEAR SET-BEVEL
10.	174-4623	[2]	SLEEVE
11.	154-5405	[2]	SEAL-LIP TYPE
12.	9R-3168 M	[4]	SCREW (M10X1.5X20-MM)
13.	119-7061	[2]	PLUG
14.	130-6878	[6]	RING
15.	169-4162	[6]	CONE-BEARING
16.	169-4161	[6]	CONE-BEARING
17.	169-4160	[6]	GEAR
18.	130-7027	[2]	CARRIER
19.	119-7042	[2]	SHAFT
20.	119-7040	[2]	GEAR-RING
21.	130-3007	[2]	NUT
22.	119-7060 M	[2]	SCREW-STOP (M14X1.5X50-MM)
23.	130-7047	[16]	STUD
24.	311-8193 M	[16]	BOLT (M10X1.5X45-MM)
25.	2S-0480	[4]	CUP-TAPERED ROLLER
26.	6V-0832	[4]	CONE
27.	130-6879	[2]	SEAL
28.	9X-0640	[2]	SEAL-O-RING
29.	130-3014 Y	[1]	SHAFT GP-DRIVE (LH)
30.	130-3013 Y	[1]	SHAFT GP-DRIVE (RH)
31.	054-6589	[2]	CLIP
32.	119-7045	[2]	SEAL
33.	7X-5771	[2]	RING-RETAINING
34.	131-3816	[2]	RING
35.	119-7053	[2]	FLANGE
36.	5P-9439	[2]	BALL BEARING
37.	8T-4139 M	[16]	BOLT (M12X1.75X30-MM)
38.	130-7026	[2]	PIN
39.	119-7038	[2]	PIN
40.	130-7008 B	[2]	SHIM (0.2-MM THK)
	130-7009 B	[2]	SHIM (0.3-MM THK)
	130-7010 B	[2]	SHIM (0.4-MM THK)
	130-7011 B	[2]	SHIM (0.6-MM THK)
	130-7012 B	[2]	SHIM (0.8-MM THK)
	130-7013 B	[2]	SHIM (1-MM THK)
	130-7015 B	[2]	SHIM (1.6-MM THK)
	130-7017 B	[2]	SHIM (2-MM THK)
41.	119-7047	[2]	SEAL
42.	119-7046	[2]	SEAL
43.	031-0426	[2]	CUP-BEARING
44.	077-3918	[2]	BEARING
45.	119-7057	[1]	HOUSING (RH)
46.	130-7031	[1]	HOUSING (LH)
47.	154-5404	[2]	BEARING
48.	130-6877	[2]	SEAL
49.	130-2998	[2]	BUSHING
50.	9X-0796	[4]	SEAL-O-RING
51.	130-6673	[1]	PLUG
52.	9R-3175	[1]	PLUG
53.	054-6526	[15]	DISC
54.	6V-3303 M	[15]	BOLT (M16X2X60-MM)
55.	054-6847	[1]	SEAL-O-RING
56.	6V-2200	[2]	CUP-BEARING
57.	003-7501	[2]	CONE-BEARING
58.	130-6798 B	[2]	SHIM (1-MM THK)
	130-6799 B	[2]	WASHER (1.05-MM THK)
	130-6800 B	[2]	SHIM (1.1-MM THK)
	130-6801 B	[2]	WASHER (62.2X75X1.15-MM THK)
	130-6802 B	[2]	WASHER (62.2X75X1.2-MM THK)
	130-6803 B	[2]	WASHER (62.2X75X1.25-MM THK)
	130-6804 B	[2]	SHIM (1.3-MM THK)
	130-6805 B	[2]	SHIM (1.35-MM THK)
	130-6806 B	[2]	SHIM (1.4-MM THK)
	130-6807 B	[2]	WASHER (1.45-MM THK)
	130-6808 B	[2]	SHIM (1.5-MM THK)
	130-6809 B	[2]	SHIM (1.55-MM THK)
	130-6810 B	[2]	SHIM (1.6-MM THK)
	130-6811 B	[2]	SHIM (1.65-MM THK)
	130-6812 B	[2]	SHIM (1.7-MM THK)
	130-6813 B	[2]	SHIM (1.75-MM THK)
	130-6814 B	[2]	SHIM (1.8-MM THK)
	130-6815 B	[2]	SHIM (1.85-MM THK)
	130-6816 B	[2]	SHIM (1.9-MM THK)
	130-6817 B	[2]	WASHER (62.2X75X1.95-MM THK)
	130-6818 B	[2]	WASHER (62.2X75X2-MM THK)
	130-6819 B	[2]	WASHER (62.2X75X2.05-MM THK)
	130-6820 B	[2]	SHIM (2.1-MM THK)
59.	119-7056	[1]	HOUSING
60.	119-7055	[1]	HOUSING
61.	130-6675	[1]	PIN
62.	082-3077	[4]	PIN
63.	130-3010	[4]	PIN
64.	105-3484 M	[12]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
65.	119-7036	[1]	PIN
66.	008-1902	[3]	CONE-BEARING
67.	6S-3051	[3]	CUP-BEARING
68.	055-1986	[1]	SEAL-LIP TYPE
69.	130-7046	[1]	FLANGE
70.	130-7028	[1]	PLATE
71.	054-6480	[1]	DISC
72.	130-3005 M	[1]	NUT (M24X2-THD)
73.	130-7024	[1]	CASE
74.	130-7048 B	[2]	RING (13.5-MM THK)
	493-8891 B	[2]	RING (11-MM THK)
	493-8892 B	[2]	RING (11.1-MM THK)
	493-8893 B	[2]	RING (11.2-MM THK)
	130-7049 B	[2]	RING (13.6-MM THK)
	130-7050 B	[2]	RING (13.7-MM THK)
75.	128-7855	[2]	GEAR-PINION
76.	9R-6994	[2]	WASHER-THRUST
77.	130-3000 M	[2]	WASHER (53.2X71.9X1.9-MM THK)
78.	119-7035	[2]	GEAR
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28850206

156-2857: AXLE GP-REAR

AXLE GP-REAR

156-2857 AXLE GP-REAR
S/N 2DR2717-3249
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT

i00783340 SEBP2885

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
1A.	9R-5219	[8]	BOLT-SPECIAL
2.	9R-2407	[1]	RETAINER AS
2A.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
2B.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
3.	156-1928	[1]	HOUSING AS (LH)
3A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
3B.	8S-9151	[1]	CUP-BEARING
3C.		[2]	STUD
3D.	156-1930	[1]	GEAR-RING (56-TEETH)
4.		[1]	HOUSING AS
4A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
4B.	8S-9151	[1]	CUP-BEARING
4C.		[2]	STUD
4D.	156-1930	[1]	GEAR-RING (56-TEETH)
5.	186-4117	[2]	CARRIER AS
			(EACH INCLUDES)
5A.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
5B.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
5C.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
5D.	9R-2419	[3]	KIT-BEARING
5E.	9R-2420	[1]	RETAINER
5F.	9R-2421	[3]	SHAFT
5G.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)
6.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
7.	9R-0883	[1]	PIN
8.	9R-0823	[1]	LEVER AS
9.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
10.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
11.	156-2572	[1]	HOUSING-REAR BRAKE (RH)
12.	9R-9410	[2]	SEAL-REAR BRAKE
13.	9R-9409	[2]	SEAL-REAR BRAKE
14.	9R-9408	[2]	PISTON-REAR BRAKE
15.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
	9R-2447 B	[1]	SPACER (45.86X50.98X31.908-MM THK)
	9R-2448 B	[1]	SPACER (45.86X50.98X31.959-MM THK)
	9R-2449 B	[1]	SPACER (45.86X50.98X32.01-MM THK)
	9R-2450 B	[1]	SPACER (45.86X50.98X32.061-MM THK)
	9R-2451 B	[1]	SPACER (45.86X50.98X32.112-MM THK)
	9R-2452 B	[1]	SPACER (45.86X50.98X32.162-MM THK)
	9R-2453 B	[1]	SPACER (45.86X50.98X32.213-MM THK)
	9R-2454 B	[1]	SPACER (45.86X50.98X32.264-MM THK)
	9R-2455 B	[1]	SPACER (45.86X50.98X32.315-MM THK)
	9R-2456 B	[1]	SPACER (45.86X50.98X32.366-MM THK)
	9R-2457 B	[1]	SPACER (45.86X50.98X32.416-MM THK)
	9R-2458 B	[1]	SPACER (45.86X50.98X32.467-MM THK)
	9R-2459 B	[1]	SPACER (45.86X50.98X32.518-MM THK)
	9R-2460 B	[1]	SPACER (45.86X50.98X32.569-MM THK)
16.	230-4017	[8]	DISC-BRAKE
17.	9R-2474	[2]	PIN
18.	9R-9401	[8]	PLATE
19.	8S-4740	[12]	BOLT (9/16-12X5-IN)
20.	9R-9398	[2]	MANIFOLD-BRAKE TUBE
21.	8H-1607	[2]	SEAL-O-RING
22.	9R-2424	[2]	GEAR (16-TEETH)
23.	8M-8157	[4]	SEAL-O-RING
24.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
25.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
26.	9X-8880	[25]	BOLT (5/8-11X2-IN)
27.	9R-2508	[1]	HOUSING
28.	113-1147	[1]	FLANGE
29.	9R-2497	[1]	SEAL
30.	9R-2501	[1]	WASHER (32.5X60.5X5.6-MM THK)
31.	9R-2502	[1]	NUT (1-1/4-18-THD)
32.	3B-5302	[1]	PIN-COTTER
33.	9R-2498	[1]	RETAINER
34.	3B-4509	[6]	LOCKWASHER
35.	3K-3379	[6]	BOLT (9/16-12X1-IN)
36.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
37.	5L-9018	[4]	BOLT-SOCKET HEAD (1/4-20X1.75-IN)
38.	8T-6760	[2]	PLUG-PIPE (1-1/2-11-1/2 NPT)
39.	9R-2499	[1]	SEAL AS
40.	9R-2496	[1]	SEAL
41.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
42.	118-5839	[2]	SEAL-REAR AXLE
43.	9R-2512	[1]	SEAL
44.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
45.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
46.	9R-2505	[1]	SEAL
47.	9R-2504	[1]	SHAFT
48.	9R-2507 M	[1]	SCREW-SPECIAL
49.	7T-7621	[1]	BEARING AS
50.	9R-2494	[1]	RING
51.	9R-2480	[1]	CASE AS
52.	2S-0480	[1]	CUP-TAPERED ROLLER
53.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
54.	9R-2506	[1]	FORK
55.	9R-2492	[1]	WASHER (64.389X78.74X3.124-MM THK)
56.	9R-2493	[1]	RING
57.	9R-2488	[1]	GEAR (16-TEETH)
58.	9R-2482	[1]	COUPLING
59.	282-9821	[1]	HOUSING-BRAKE (LH)
60.	9R-2486	[1]	SPRING
61.	9R-2483	[1]	ADAPTER
62.	9R-2484	[2]	BUSHING-TERMINAL
63.	9R-2490	[2]	WASHER (76.2X101.6X1.524-MM THK)
64.	9R-2491	[1]	SPIDER
65.	9R-9403	[4]	PINION
66.	9R-2489	[4]	WASHER-SPRING
67.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
68.	9R-2495	[2]	SEAL
69.	118-9117	[1]	GEAR SET
70.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
71.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
72.	9R-2503	[1]	BLOCK
73.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
74.	0T-0318	[2]	BOLT (7/16-14X1-IN)
75.	9R-2487	[1]	GEAR (16-TEETH)
76.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
77.	9R-6602	[2]	PLUG-MAGNETIC
78.	5P-0540	[4]	NUT-HEX FULL (9/16-18-THD)
79.	282-9822	[1]	HOUSING-BRAKE (RH)
80.	156-1933	[1]	HOUSING-REAR BRAKE (LH)
81.	9R-2426	[2]	LOCK
82.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP28850207

150-1281: CHART-WHEEL & TIRE

CHART-WHEEL & TIRE

150-1281 CHART-WHEEL & TIRE
S/N 1TR1284-1549; 2DR2717-3249
AN ATTACHMENT

i00810171 SEBP2885

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
			(FOR USAGE REFER TO CHART)
1.	9R-0315	[1]	WHEEL AS (FRONT)
2.	9R-1572	[1]	WHEEL AS
3.	9R-2937	[1]	WHEEL AS
4.	135-0770	[1]	WHEEL AS (FRONT)
5.	135-0786	[1]	WHEEL AS (FRONT)
6.	141-7221		NUT-HEX FLANGE (3/4-16-THD)
7.	6D-0337	[1]	VALVE GP-TIRE
	6D-0443	[1]	HOUSING AS-CORE
	2D-2628	[1]	CORE-VALVE
	2D-2633	[1]	CAP
	8D-2707	[2]	SPUD AS
	2D-2629	[1]	GROMMET
	2D-2630	[1]	WASHER
	2D-2631	[1]	NUT (0.482-26-THD)
			CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT

#SEBP28850208

150-4377: CHART-WHEEL & TIRE

CHART-WHEEL & TIRE

150-4377 CHART-WHEEL & TIRE
S/N 1TR1284-1549; 2DR2717-3249
AN ATTACHMENT

i00810172 SEBP2885

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
			(FOR USAGE REFER TO CHART)
1.	102-8670	[1]	WHEEL AS (REAR)
2.	102-8682	[1]	WHEEL AS
3.	112-4410	[1]	WHEEL AS (REAR)
4.	112-4411	[1]	WHEEL AS (REAR)
5.	112-4412	[1]	WHEEL AS (REAR)
6.	114-5632	[1]	WHEEL AS
7.	119-7776	[1]	WHEEL AS (REAR)
8.	119-7785	[1]	WHEEL AS (REAR)
9.	119-7789	[1]	WHEEL AS (REAR)
10.	141-7221		NUT-HEX FLANGE (3/4-16-THD)
11.	6D-0337	[1]	VALVE GP-TIRE
	6D-0443	[1]	HOUSING AS-CORE
	2D-2628	[1]	CORE-VALVE
	2D-2633	[1]	CAP
	8D-2707	[2]	SPUD AS
	2D-2629	[1]	GROMMET
	2D-2630	[1]	WASHER
	2D-2631	[1]	NUT (0.482-26-THD)
			CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT

#SEBP28850209

179-6273: CONTROL AR-TRANSMISSION

CONTROL AR-TRANSMISSION

179-6273 CONTROL AR-TRANSMISSION
S/N 1TR1284-1549; 2DR2717-3249
AN ATTACHMENT

i01166743 SEBP2885

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
139-3559 Y	[1]	BOX GP-BATTERY
138-7381 Y	[1]	FILLER GP-POWER TRAIN OIL
139-8493	[1]	FILM-OVERLAY
142-0458 Y	[1]	FLOOR MAT GP
143-0789 Y	[1]	LINES GP-POWER TRAIN COOLER (POWER SHIFT)
143-0788 Y	[1]	MOUNTING GP-ENGINE & XMSN (POWER SHIFT)
138-4559 Y	[1]	SHAFT GP-DRIVE (FRONT)
142-4437 Y	[1]	TRANSMISSION AR-POWER SHIFT
163-9198 Y	[1]	WIRING GP-POWER SHIFT
Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

AXLE GP

Operation and Maintenance Manual

Axle Universal Joint (Front) - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Axle Universal Joint (Rear) - Lubricate - All Wheel Steer Machines Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Kingpin Bearings (Front) - Lubricate - Two-Wheel Drive Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Technical Information Bulletin

SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS

Specifications

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Systems Operation

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Testing and Adjusting

Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Rear) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Disassembly and Assembly

Axle Group (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Pinion Assembly (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Final Drive Planetary Carrier Hub
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Final Drive And Axle Housing (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Brakes (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Front)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Tie Rod
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Drive Pinion
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Service Magazine

Serviceable Parts for 4 Wheel Drive Front Axle Steering Cylinder{4303}
1997/08/11

Additional Serviceable Parts Available For Front Axle {3020}
1999/05/10

Correct Identification of the Bearing Cones for the 154-5471 Drive and Steering Axle for C-Series Machines {3020, 3278}
2000/02/14

Service Parts for the Front AWD Axle Are Now Available {3020, 3260, 3278, 4303}
2000/02/14

New Maintenance Interval for Checking the Oil Level of the Axle Oscillation Bearing {3020, 3250, 7551}
2000/02/21

Correction to the Disassembly and Assembly, SENR1206 for the Differential {3258}
2000/12/25

Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
2001/06/11

A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
2005/01/24

Oil Change Interval for the Rear Axle {3260}
2002/05/20

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12

Correction to Axle Housing (Front) (All Wheel Drive) {3260}
2005/05/16

Empty Compartment Brake Purging Procedure {3278, 3282, 4269, 4291}
2006/03/27

New Brake Housings for the Rear Axle Are Available {3278, 3282}
2008/06/23

A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}

Caterpillar Parts SIS Catalog 438C :

154-5468 AXLE & MTG GP-DRIVE & STEERING

119-8191 AXLE & MTG GP-DRIVE & STEERING

163-9226 WIRING GP-STEERING

147-2732 WIRING GP-STABILIZER ALARM

136-7436 WIRING GP-STABILIZER ALARM

175-6775 WIRING GP-RIDE CONTROL

175-6771 WIRING GP-RIDE CONTROL

154-5468 AXLE & MTG GP-DRIVE & STEERING

114-0165 AXLE & MTG GP-REAR

119-8190 AXLE GP-DRIVE & STEERING

154-5472 AXLE GP-DRIVE & STEERING

174-6317 AXLE GP-DRIVE & STEERING

156-2857 AXLE GP-REAR

150-1281 CHART-WHEEL & TIRE

150-4377 CHART-WHEEL & TIRE

Truck sale:

Caterpillar 438C
- backhoe loader
CGT - COMPAGNIA GENERALE TRATTORI

35.061

Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BERGERAT MONNOYEUR S.A.S.

42,862

Caterpillar 438CAWS, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium

Caterpillar 438C, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium

CATERPILLAR 438C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -