AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-1842 CONTROL GP-HYDRAULIC HAND S/N 1WR8116-10736 4 LEVER PART OF 119-4005, 154-5432 HYDRAULIC AR AN ATTACHMENT 416C


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING

BACKHOE LOADER 416C BACKHOE LOADER 1WR
 416C Backhoe Loader 1WR08116-10736 (MACHINE) POWERED BY 3054 Engine SEBP2888 416C 1WR   (1996)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
112-1835 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
134-4407 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL
 

#SEBP28880740
 

112-1842: CONTROL GP-HYDRAULIC HAND

112-1842 CONTROL GP-HYDRAULIC HAND
S/N 1WR8116-10736
4 LEVER
PART OF 119-4005, 154-5432 HYDRAULIC AR
AN ATTACHMENT
i00200871 SEBP2888
1121842 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4815 [2] ROD END  
2. 8T-9000 [1] KNOB  
3. 9R-2806 [2] PIN  
4. 9R-2807 [2] CLIP (RETAINER)  
5. 116-3016 [1] LEVER AS  
  5V-4410 [1] BUSHING  
6. 116-3018 [1] ROD  
7. 136-7439 B [1] SPACER (20X40X3-MM THK)  
8. 136-7440 B [1] SHIM (1-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
10. 101-2788 J [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
11. 117-5672 [1] BOOT  
12. 123-3119 [1] PLATE  
13. 186-2854 L [1] FILM-INSTRUCTION  
  B   USE AS REQUIRED
  J   USE AS REQUIRED WHEN MACHINE IS EQUIPPED WITH E-STICK
  L   USE AS REQUIRED ON MACHINES WITHOUT E-STICK
  M   METRIC PART
 

#SEBP28880741
 

134-4407: CONTROL GP-HYDRAULIC HAND

134-4407 CONTROL GP-HYDRAULIC HAND
S/N 1WR8116-10736
PART OF 112-1848, 159-4866, 159-4868, 159-4880, 159-4881 HYDRAULIC AR
AN ATTACHMENT
i00202178 SEBP2888
1344407 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [3] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [1] RING-RETAINING  
3. 8T-3984 [1] KNOB  
4. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [1] BALL JOINT  
6. 8T-4815 [1] ROD END  
7. 9R-2806 [1] PIN  
8. 9R-2807 [1] CLIP (RETAINER)  
9. 9R-9953 [1] ROD  
10. 104-1967 [1] LEVER AS  
10A. 1K-6649 [1] BUSHING-OILLESS  
  8Y-3795 M [1] BOSS (M10X1.5X39-MM)  
11. 8T-4133 M [2] NUT (M10X1.5-THD)  
12. 117-5671 A [1] BOOT  
    (PART OF 112-1848,119-8178, 119-8179, 119-8180, 119-8181, 139-9152, 139-9153, 143-3947, 143-3948, 143-3949, 143-3950,
    143-3951 & 143-3952 HYDRAULIC AR)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28880742
 

9R-9705: CONTROL GP-HYDRAULIC HAND

9R-9705 CONTROL GP-HYDRAULIC HAND
S/N 1WR8116-10736
AN ATTACHMENT
i00200774 SEBP2888
9R9705 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7439 B [4] SPACER (20X40X3-MM THK)  
2. 8C-3392 [2] ROD END  
3. 8T-3984 [2] KNOB  
4. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4773 [4] BALL JOINT  
6. 8T-4815 [8] ROD END  
7. 8T-9000 [2] KNOB  
8. 8Y-7402 [2] BOOT  
9. 9R-2806 [8] PIN  
10. 9R-2807 [8] CLIP (RETAINER)  
11. 9R-8087 [1] LEVER AS  
  9R-9973 [1] PLATE AS (LH)  
12. 9R-9709 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
13. 9R-9720 [2] BRACKET AS  
14. 9R-9721 [2] LEVER AS  
    (EACH INCLUDES)
  5V-4410 [1] BUSHING  
15. 9R-9722 [6] ROD  
16. 9R-9901 [8] FASTENER (CLIP)  
17. 9R-9969 [2] BEARING  
18. 9R-9972 [1] LEVER AS  
  9R-9975 [1] PLATE AS (RH)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 104-9483 [1] PLATE  
21. 115-8124 [2] WASHER (12.2X16X3-MM THK)  
22. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
23. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
24. 117-5672 [2] BOOT  
25. 8T-4133 M [12] NUT (M10X1.5-THD)  
26. 110-1463 [1] PLATE-INSTRUCTION  
27. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
28. 006-8606 [2] RING-RETAINING  
29. 136-7440 B [8] SHIM (1-MM THK)  
30. 157-7237 [1] BRACKET AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28880743
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N 1WR8116-10736
AN ATTACHMENT
i00200824 SEBP2888
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP28880744
 

106-6373: CONTROL GP-HYDRAULIC PEDAL

106-6373 CONTROL GP-HYDRAULIC PEDAL
S/N 1WR8116-10736
PART OF 106-6253, 154-5431, 154-5433 HYDRAULIC AR
AN ATTACHMENT
i00200838 SEBP2888
1066373 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0593 [1] PEDAL AS  
2. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 106-6374 [1] SUPPORT AS  
13. 9R-2614 [2] BEARING  
14. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
15. 8T-4773 [1] BALL JOINT  
16. 8T-4815 [1] ROD END  
17. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP28880745
 

113-0720: CONTROL GP-HYDRAULIC PEDAL

113-0720 CONTROL GP-HYDRAULIC PEDAL
S/N 1WR8116-10736
LEFT FT FACTORY
PART OF 119-4006, 154-5433 HYDRAULIC AR
AN ATTACHMENT
i00200884 SEBP2888
1130720 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0592 [1] PEDAL AS  
2. 106-6374 [1] SUPPORT AS  
3. 9R-2614 [2] BEARING  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
13. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
14. 8T-4773 [1] BALL JOINT  
15. 8T-4815 [1] ROD END  
16. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP28880746
 

159-4922: CONTROL GP-STEERING & XMSN

159-4922 CONTROL GP-STEERING & XMSN
S/N 1WR8116-10736
SHUTTLE/TILT
AN ATTACHMENT
i00967882 SEBP2888
1594922 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
2A. 149-0777 [1] KNOB  
2B. 149-0782 [1] KIT-TILT LEVER  
2C. 149-0783 [1] KIT-SHAFT  
2D. 149-0784 [1] KIT-HOUSING  
2E. 149-0780 [1] KIT-GAS SPRING  
3. 166-7501 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 [4] SHIM (0.5-MM THK)  
12. 153-9580 Y [1] STEERING WHEEL GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28880747
 

159-4923: CONTROL GP-STEERING & XMSN

159-4923 CONTROL GP-STEERING & XMSN
S/N 1WR8116-10736
POWER SHIFT, TILT
Type 1
AN ATTACHMENT
i00968333 SEBP2888
1594923 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
2A. 149-0777 [1] KNOB  
2B. 149-0782 [1] KIT-TILT LEVER  
2C. 149-0783 [1] KIT-SHAFT  
2D. 149-0784 [1] KIT-HOUSING  
2E. 149-0785 [1] KIT-GAS SPRING  
3. 158-6209 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 [4] SHIM (0.5-MM THK)  
12. 153-9580 CY [1] STEERING WHEEL GP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28880748
 

159-4923: CONTROL GP-STEERING & XMSN

159-4923 CONTROL GP-STEERING & XMSN
S/N 1WR8116-10736
POWER SHIFT, TILT
Type 2
AN ATTACHMENT
i01108004 SEBP2888
1594923 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
  149-0777 [1] KNOB  
  149-0782 [1] KIT-TILT LEVER  
  149-0783 [1] KIT-SHAFT  
  149-0784 [1] KIT-HOUSING  
  149-0785 [1] KIT-GAS SPRING  
3. 174-6649 C [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 B [4] SHIM (0.5-MM THK)  
12. 153-9580 Y [1] STEERING WHEEL GP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28880749
 

159-4924: CONTROL GP-STEERING & XMSN

159-4924 CONTROL GP-STEERING & XMSN
S/N 1WR8116-10736
STATIONARY
Type 1
AN ATTACHMENT
i00968658 SEBP2888
1594924 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 101-2902 [1] STEERING COLUMN AS  
  6V-8227 M [1] NUT (M18X1.5-THD)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-8874 M [1] NUT-WELD (M5X0.8-THD)  
  9D-6621 [2] NUT-WELD (10-24-THD)  
3. 137-8899 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6325 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 153-9580 Y [1] STEERING WHEEL GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Backhoe Extendable Stick Control (Foot Operated)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Four Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Foot Swing Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Standard Pattern) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Excavator Pattern)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Auxiliary Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Auxiliary Control (Foot Operated) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Multipurpose Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Bracket Modification for Improved Control Groups{5063}
Bracket Modification for Improved Control Groups{5063}
Service Letter-NACD
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Americas
Technical Information Bulletin
E-Stick Pedal Linkage Change
E-Stick Pedal Linkage Change
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Specifications
Hydraulic Hand Control (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
An Improved Bucket Lever Will Increase Service Life {5063}
2001/10/15
The Revised Special Instruction, REHS0325 , "Bracket Modification for Improved Control Groups" Can Be Ordered {5063}
2003/05/12

Caterpillar Parts SIS Catalog 416C :

CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1835 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1834 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1810 CONTROL GP-HYDRAULIC HAND
CONSOLE GP-SIDE
104-3919 CONSOLE GP-SIDE
CONSOLE GP-REAR
104-3921 CONSOLE GP-REAR
CONSOLE GP-FRONT
104-6044 CONSOLE GP-FRONT
CONSOLE GP-FRONT
104-3923 CONSOLE GP-FRONT
CONTROL GP-HYDRAULIC HAND
134-4407 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
113-0720 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-STEERING & XMSN
159-4922 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
159-4923 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
159-4923 CONTROL GP-STEERING & XMSN

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.