AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

163-9226 WIRING GP-STEERING S/N 1CR864-866 PART OF 154-5435 POWER TRAIN AR 426C BACKHOE LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
BRAKING SYSTEM
BRAKE GP

BACKHOE LOADER 426C BACKHOE LOADER 1CR
 426C Backhoe Loader Center Pivot, Single Tilt 1CR00864-01085 (MACHINE) POWERED BY 3054 Engine SEBP2890 426C 1CR   (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-STABILIZER ALARM
136-7436 WIRING GP-STABILIZER ALARM
WIRING GP-STABILIZER ALARM
147-2732 WIRING GP-STABILIZER ALARM
WIRING GP-STEERING
163-9226 WIRING GP-STEERING
WIRING GP-STEERING
163-9226 WIRING GP-STEERING
VALVE GP-BACKHOE NEUTRALIZER
141-7885 VALVE GP-BACKHOE NEUTRALIZER
INSTALLATION GP-A/C SHUTOFF
179-5772 INSTALLATION GP-A/C SHUTOFF
 

#SEBP28900190
 

163-9226: WIRING GP-STEERING

163-9226 WIRING GP-STEERING
S/N 1CR864-866
PART OF 154-5435 POWER TRAIN AR
i00986970 SEBP2890
1639226 WIRING GP-STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6257 [1] HARNESS AS-STEERING  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)`
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL)
2. 148-4505 Y [3] SUPPRESSOR GP-ELECTRONIC  
3. 122-7137 [1] LAMP (12-VOLT)  
4. 164-9638 [1] HARNESS AS-STEERING  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 115-1970 [1] SWITCH AS-TOGGLE  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
6. 4P-8134 [1] CLIP (LADDER)  
7. 113-8490 [1] FUSE (10-AMPERE)  
8. 138-8454 M [8] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
9. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
11. 109-2356 [3] PLUG  
12. 128-5091 [1] SWITCH AS-PRESSURE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 3J-1907 [1] SEAL-O-RING  
14. 3S-2093 [26] STRAP-CABLE  
15. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
16. 104-5065 [1] BRACKET AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
17. 104-5064 [1] COVER  
18. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
19. 107-9677 [1] SENSOR AS-POSITION (ALL WHEEL STEER)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 104-5066 [1] LEVER  
21. 9R-2806 [1] PIN  
22. 9R-2807 [1] CLIP (RETAINER)  
23. 8T-4138 M [3] BOLT (M6X1X20-MM)  
24. 8T-0337 M [3] SCREW-MACHINE (M4X0.7X12-MM)  
25. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
26. 104-5071 [1] CLAMP AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
27. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 4P-7581 [1] CLIP (LADDER)  
29. 108-1540 [1] PLUG  
30. 3E-7572 [3] RELAY AS (12-VOLT)  
31. 106-8704 [2] SUPPRESSOR AS-ARC  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
32. 7X-2533 M [1] BOLT (M6X1X35-MM)  
33. 6V-9327 M [1] SETSCREW-SOCKET (M6X1-THD)  
34. 163-4531 [1] PLATE AS (LH)  
35. 7K-1181 [2] STRAP-CABLE  
36. 130-0146 [1] CONTROL GP-BUCKET POSITIONER  
37. 128-8567 [1] INDICATOR AS-AWS  
  122-7137 [1] LAMP (12-VOLT)  
  123-0306 [1] SOCKET AS  
38. 129-5078 [1] INDICATOR AS-REAR STEERING  
  4B-2043 [5] NUT (8-32-THD)  
  9B-7233 [5] LOCKWASHER  
39. 130-6255 [1] HARNESS AS-STEERING  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)`
40. 130-6256 [1] HARNESS AS-STEERING  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)`
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  200-2213 [1] RECEPTACLE AS-CONNECTOR (3-PIN, GAUGE)  
41. 9W-0267 [3] CLIP-RELAY  
42. 161-2905 [1] HARNESS AS-STEERING  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH INDCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
43. 130-6662 [1] FILM  
44. 164-6906 [1] FILM-INSTRUCTION (ALL WHEEL STEER)  
45. 163-4532 [1] PLATE AS (RH)  
46. 034-1432 [2] STRAP-CABLE  
47. 134-2305 [1] SEAL  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900191
 

163-9226: WIRING GP-STEERING

163-9226 WIRING GP-STEERING
S/N 1CR867-1085
PART OF 154-5435 POWER TRAIN AR
i01135134 SEBP2890
1639226 WIRING GP-STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6257 [1] HARNESS AS-STEERING  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)`
2. 148-4505 Y [3] SUPPRESSOR GP-ELECTRONIC  
3. 122-7137 [1] LAMP (12-VOLT)  
4. 164-9638 [1] HARNESS AS-STEERING  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 115-1970 [1] SWITCH AS-TOGGLE  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
6. 4P-8134 [1] CLIP (LADDER)  
7. 113-8490 [1] FUSE (10-AMPERE)  
8. 138-8454 M [4] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
9. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
11. 109-2356 [3] PLUG  
12. 128-5091 [1] SWITCH AS-PRESSURE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 3J-1907 [1] SEAL-O-RING  
14. 3S-2093 [26] STRAP-CABLE  
15. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
16. 104-5065 [1] BRACKET AS  
  6V-9632 M NUT-WELD (M6X1-THD)  
17. 104-5064 [1] COVER  
18. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
19. 107-9677 [1] SENSOR AS-POSITION (ALL WHEEL STEER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
20. 104-5066 [1] LEVER  
21. 9R-2806 [1] PIN  
22. 9R-2807 [1] CLIP (RETAINER)  
23. 8T-4138 M [3] BOLT (M6X1X20-MM)  
24. 8T-0337 M [3] SCREW-MACHINE (M4X0.7X12-MM)  
25. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
26. 104-5071 [1] CLAMP AS  
  6V-9632 M NUT-WELD (M6X1-THD)  
27. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 4P-7581 [1] CLIP (LADDER)  
29. 108-1540 [1] PLUG  
30. 3E-7572 [3] RELAY AS (12-VOLT)  
31. 106-8704 [2] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
32. 7X-2533 M [1] BOLT (M6X1X35-MM)  
33. 6V-9327 M [1] SETSCREW-SOCKET (M6X1-THD)  
35. 7K-1181 [2] STRAP-CABLE  
36. 130-0146 [1] CONTROL GP-BUCKET POSITIONER  
37. 128-8567 [1] INDICATOR AS-AWS  
  122-7137 [1] LAMP (12-VOLT)  
  123-0306 [1] SOCKET AS  
38. 129-5078 [1] INDICATOR AS-REAR STEERING  
  4B-2043 [5] NUT (8-32-THD)  
  9B-7233 [5] LOCKWASHER  
39. 130-6255 [1] HARNESS AS-STEERING  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)`
40. 130-6256 [1] HARNESS AS-STEERING  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)`
41. 9W-0267 [3] CLIP-RELAY  
42. 161-2905 [1] HARNESS AS-STEERING  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH INDCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
43. 130-6662 [1] FILM  
44. 164-6906 C [1] FILM-INSTRUCTION (ALL WHEEL STEER)  
45. 163-4532 [1] PLATE AS (RH)  
46. 034-1432 [2] STRAP-CABLE  
47. 134-2305 [1] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900192
 

112-2113: AXLE & MTG GP-DRIVE & STEERING

112-2113 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N 1CR864-1085
ALL WHEEL STEER
PART OF 154-5460 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00202118 SEBP2890
1122113 AXLE & MTG GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 055-1990 [1] VENT  
2. 111-1523 Y [1] AXLE GP-DRIVE & STEERING  
3. 130-2697 [2] VALVE-VENT  
4. 7X-2570 M [8] BOLT (M20X2.5X220-MM)  
5. 8T-4131 M [8] NUT (M20X2.5-THD)  
6. 8T-5439 [16] WASHER-HARD (21.5X45X6-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900193
 

154-5467: AXLE & MTG GP-DRIVE & STEERING

154-5467 AXLE & MTG GP-DRIVE & STEERING
S/N 6XN3616-4980; 1CR864-1085
PART OF 154-5450, 154-5460 DRIVE AR-BACKHOE LOADER
Type 1
AN ATTACHMENT
i00981048 SEBP2890
1545467 AXLE & MTG GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-7082 [1] WASHER (2.266X4X0.031-IN THK)  
2. 8T-8549 M [1] LOCKNUT (M12X1.75-THD)  
3. 165-8996 [2] WASHER-THRUST (55.5X100.5X5-MM THK)  
4. 9R-9702 [2] WASHER (56X100X1.6-MM THK)  
5. 112-9629 [1] PIN  
6. 113-8491 [1] FUSE (15-AMPERE)  
7. 154-5471 Y [1] AXLE GP-DRIVE & STEERING  
8. 8T-5041 M [1] BOLT (M12X1.75X120-MM)  
9. 106-6568 [1] SWITCH AS (AWD)  
  111-7899 [1] GASKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900194
 

154-5467: AXLE & MTG GP-DRIVE & STEERING

154-5467 AXLE & MTG GP-DRIVE & STEERING
S/N 6XN3616-4980; 1CR864-1085
PART OF 154-5450, 154-5460 DRIVE AR-BACKHOE LOADER
Type 2
AN ATTACHMENT
i01148242 SEBP2890
1545467 AXLE & MTG GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-7082 [1] WASHER (2.266X4X0.031-IN THK)  
2. 8T-8549 M [1] LOCKNUT (M12X1.75-THD)  
3. 165-8996 [2] WASHER-THRUST (55.5X100.5X5-MM THK)  
4. 9R-9702 [2] WASHER (56X100X1.6-MM THK)  
5. 112-9629 [1] PIN  
6. 113-8491 [1] FUSE (15-AMPERE)  
7. 174-5206 CY [1] AXLE GP-DRIVE & STEERING  
8. 8T-5041 M [1] BOLT (M12X1.75X120-MM)  
9. 106-6568 [1] SWITCH AS (AWD)  
  111-7899 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900195
 

154-5467: AXLE & MTG GP-DRIVE & STEERING

154-5467 AXLE & MTG GP-DRIVE & STEERING
S/N 6XN3616-4980; 1CR864-1085
PART OF 154-5450, 154-5460 DRIVE AR-BACKHOE LOADER
Type 3
AN ATTACHMENT
i01148247 SEBP2890
1545467 AXLE & MTG GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-7082 [1] WASHER (2.266X4X0.031-IN THK)  
2. 8T-8549 M [1] LOCKNUT (M12X1.75-THD)  
3. 165-8996 [2] WASHER-THRUST (55.5X100.5X5-MM THK)  
4. 9R-9702 [2] WASHER (56X100X1.6-MM THK)  
5. 112-9629 [1] PIN  
6. 113-8491 [1] FUSE (15-AMPERE)  
7. 154-5471 CY [1] AXLE GP-DRIVE & STEERING  
8. 8T-5041 M [1] BOLT (M12X1.75X120-MM)  
9. 106-6568 [1] SWITCH AS (AWD)  
  111-7899 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900196
 

107-3716: AXLE & MTG GP-REAR

107-3716 AXLE & MTG GP-REAR
S/N 6XN3616-4980
PART OF 154-5447, 154-5450 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00779149 SEBP2890
1073716 AXLE & MTG GP-REAR Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VALVE AS-VENT  
2. 156-2853 Y [1] AXLE GP-REAR  
3. 7X-2570 M [8] BOLT (M20X2.5X220-MM)  
4. 8T-4131 M [8] NUT (M20X2.5-THD)  
5. 8T-5439 [16] WASHER-HARD (21.5X45X6-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900197
 

111-1523: AXLE GP-DRIVE & STEERING

111-1523 AXLE GP-DRIVE & STEERING -REAR
S/N 1CR864-1085
RATIO 18.62. ALL WHEEL STEER
PART OF 112-2113 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
i00202104 SEBP2890
1111523 AXLE GP-DRIVE & STEERING Parts scheme 1111523 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-2462 [10] SPRING  
2. 8U-3591 [10] SPACER (6.5X15X7-MM THK)  
3. 7X-2619 M [10] BOLT (M6X1X10-MM)  
4. 110-0878 [10] PIN  
5. 110-4748 [16] NUT  
6. 009-3819 [1] CONE-BEARING  
7. 110-0880 [2] CARRIER-DISC  
8. 110-4752 B [4] SHIM  
9. 110-0876 [6] SCREW  
10. 1G-6735 [8] PIN-GROOVED  
11. 110-0877 [6] PIN  
12. 110-4736 [6] RING  
13. 110-0870 [10] PLATE  
14. 110-0842 [8] DISC-FRICTION  
15. 110-4757 [2] RING  
16. 110-4755 [2] RING  
17. 110-4756 [2] RING  
18. 110-4758 [2] RING  
19. 2D-9191 [1] CONE-BEARING  
20. 110-0158 B [1] RING (16-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
21. 110-0159 B [2] WASHER-THRUST (3-MM THK)  
  110-0160 B [2] WASHER-THRUST (2.7-MM THK)  
  110-0161 B [2] WASHER-THRUST (2.5-MM THK)  
  110-0162 B [2] WASHER-THRUST (2.2-MM THK)  
  110-0163 B [2] WASHER-THRUST (2-MM THK)  
  110-0164 B [2] WASHER-THRUST (1.7-MM THK)  
  110-0165 B [2] WASHER-THRUST (1.5-MM THK)  
22. 5W-5547 B [1] DISC (1-MM THK)  
  5W-5548 B [1] DISC (1.1-MM THK)  
  5W-5549 B [1] DISC (1.2-MM THK)  
  5W-5550 B [1] DISC (1.3-MM THK)  
  5W-5551 B [1] DISC (1.4-MM THK)  
  5W-5552 B [1] DISC (1.5-MM THK)  
  5W-5553 B [1] DISC (1.6-MM THK)  
  5W-5554 B [1] DISC (1.7-MM THK)  
  5W-5555 B [1] DISC (1.05-MM THK)  
  5W-5556 B [1] DISC (1.15-MM THK)  
  5W-5557 B [1] DISC (1.25-M THK)  
  5W-5558 B [1] DISC (1.35-MM THK)  
  5W-5559 B [1] DISC (1.45-MM THK)  
  5W-5560 B [1] DISC (1.55-MM THK)  
  5W-5561 B [1] DISC (1.65-MM THK)  
  5W-5562 B [1] DISC (1.75-MM THK)  
  5W-6400 B [1] DISC (1.8-MM THK)  
  8U-2752 B [1] DISC (0.7-MM THK)  
  8U-2753 B [1] DISC (0.8-MM THK)  
  8U-2754 B [1] DISC (0.9-MM THK)  
23. 110-2461 M [8] BOLT (M16X1.5X100-MM)  
24. 110-2457 [4] PIN-SPRING  
25. 110-2458 [4] PIN-SPRING  
26. 110-2467 [1] SHAFT-DIFFERENTIAL  
27. 213-9783 [6] BEARING-ROLLER  
28. 110-0845 [4] WASHER-THRUST  
29. 110-0855 [2] GEAR-AXLE BEVEL  
30. 110-0852 [2] DISC-PRESSURE  
31. 110-0854 [8] DISC-FRICTION  
32. 110-0853 [10] PLATE  
33. 253-9741 [1] CASE-DIFFERENTIAL  
34. 190-8591 [12] WASHER (64.5X72.1X2-MM THK)  
35. 213-9759 [4] GEAR-BEVEL  
36. 193-1132 [6] GEAR-PLANETARY  
37. 190-8590 [12] RING-SNAP  
38. 110-0867 [1] HOUSING-AXLE DRIVE  
39. 110-0883 [2] HOUSING-BRAKE  
40. 190-8567 B [1] SHIM (1-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  110-0124 [1] SHIM (2-MM THK)  
  110-0122 [1] SHIM (1.8-MM THK)  
  110-0121 [1] SHIM (1.5-MM THK)  
  110-0120 [1] SHIM (1.2-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  193-1125 B [1] SHIM (0.1-MM THK)  
  193-1127 B [1] SHIM (0.15-MM THK)  
  193-1128 B [1] WASHER (0.1-MM THK)  
  193-1129 B [1] WASHER (0.15-MM THK)  
  193-1130 B [1] WASHER (0.5-MM THK)  
41. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
42. 110-4746 [1] SEAL  
43. 110-0856 [1] CAP-PROTECTION  
44. 113-5988 [1] FLANGE  
45. 110-4791 [1] HOUSING-AXLE  
46. 110-4749 [2] PLUG  
47. 110-2463 [1] BEARING-ROLLER  
48. 110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  110-0170 B [2] WASHER (0.55-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2961 B [2] SHIM (1.7-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
49. 110-0875 [2] PISTON  
50. 110-4753 [2] BEARING  
51. 008-1902 [2] CONE-BEARING  
52. 110-4790 [1] HOUSING-AXLE  
53. 110-4792 [1] HOUSING-BRAKE  
  110-4793 [1] HOUSING-BRAKE  
54. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
55. 110-0134 B [1] SHIM (0.4-MM THK)  
  110-0131 B [1] SHIM (1-MM THK)  
  110-0132 B [1] SHIM (0.8-MM THK)  
  110-0133 B [1] SHIM (0.6-MM THK)  
  B [1] SHIM (0.3-MM THK)  
  110-0136 B [1] SHIM (0.2-MM THK)  
  110-0126 B [1] SHIM (2-MM THK)  
  110-0127 B [1] SHIM (1.8-MM THK)  
  110-0128 B [1] SHIM (1.6-MM THK)  
56. 110-0859 [2] PIN-BEARING  
57. 096-9988 M [8] BOLT (M14X2X30-MM)  
58. 9R-6947 [2] SEAL-O-RING  
59. 9R-6952 [2] CAP-SEALING  
60. 110-0884 [2] HUB  
61. 110-0874 [20] BOLT-WHEEL  
62. 110-4745 [2] SEAL-O-RING  
63. 8U-2356 [4] BEARING  
64. 110-0866 [2] CARRIER-PLANETARY  
65. 110-0862 [2] GEAR-RING  
66. 098-2996 [4] SEAL-O-RING  
67. 6S-3051 [2] CUP-BEARING  
68. 110-4737 [6] RING-RETAINING  
69. 4D-8648 [2] CUP-BEARING  
70. 110-0865 [2] SHAFT-SUN GEAR  
71. 009-3818 [1] CUP-BEARING  
72. 110-0846 [2] RING-RETAINING  
73. 2D-9190 [1] CUP-BEARING  
74. 110-0863 [2] WASHER-THRUST  
75. 110-0844 [2] WASHER-THRUST  
76. 110-0849 [2] NUT-SLOTTED  
77. 110-0861 [2] WASHER-TAB  
78. 9R-6965 M [4] SCREW (M10X1.5X20-MM)  
79. 110-0851 [2] SEAL  
80. 110-0850 [4] SEAL  
81. 110-0839 [2] BUSHING  
82. 110-0864 [2] RING-RETAINING  
83. 110-2460 M [4] BOLT (M12X1.5X95-MM)  
84. 8T-6385 M [32] BOLT (M16X2X180-MM)  
85. 110-2455 M [4] BOLT (M12X1.5X20-MM)  
86. 110-4733 [2] UNIVERSAL JOINT  
87. 8T-4779 M [8] BOLT (M16X2X35-MM)  
88. 110-0860 [2] PIN-BEARING  
89. 130-2701 [1] GEAR SET-REAR AXLE  
90. 110-0843 [1] WASHER (31X56X6-MM THK)  
91. 110-0848 M [1] NUT (M30X1.5-THD)  
92. 110-2456 [4] PIN-SPRING  
93. 110-0840 [2] TIE ROD  
94. 110-0871 [1] GUIDE  
95. 110-0847 [1] PLUG-SCREW  
96. 9R-6953 [6] SEAL-O-RING  
97. 109-4440 [5] PLUG  
98. 110-0841 [1] ROD-PISTON  
99. 110-4754 [1] GASKET  
100. 110-4759 [2] GUIDE-PISTON  
101. 110-0873 [1] CYLINDER  
102. 110-4742 [2] SEAL-O-RING  
103. 110-4739 [12] RING-SNAP  
104. 110-4735 [4] RING-GUIDE  
105. 5W-6392 [2] SEAL-O-RING  
106. 5W-6391 [2] SCRAPER  
107. 110-0872 [1] GUIDE  
108. 110-2459 M [8] BOLT (M14X2X105-MM)  
109. 6V-2652 [2] CONE-BEARING  
110. 110-0858 [2] CAP-SEALING  
111. 110-4743 [2] SEAL-O-RING  
112. 9R-3171 [4] FITTING  
  225-5014 B [1] RING (16.56-MM THK)  
  225-5015 B [1] RING (16.62-MM THK)  
  225-5016 B [1] RING (16.64-MM THK)  
  225-5017 B [1] RING (16.68-MM THK)  
  225-5018 B [1] RING (16.72-MM THK)  
  225-5019 B [1] RING (16.74-MM THK)  
  225-5020 B [1] RING (16.76-MM THK)  
  225-5021 B [1] RING (16.76-MM THK)  
  225-5022 B [1] RING (16.78-MM THK)  
  225-5023 B [1] RING (16.82-MM THK)  
  225-5024 B [1] RING (16.84-MM THK)  
  225-5025 B [1] RING (16.88-MM THK)  
  225-5026 B [1] RING (16.9-MM THK)  
  225-5027 B [1] RING (16.94-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28900198
 

154-5471: AXLE GP-DRIVE & STEERING

154-5471 AXLE GP-DRIVE & STEERING -FRONT
S/N 6XN3616-4980; 1CR864-1085
RATIO 13.74
PART OF 154-5467 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
i00974215 SEBP2890
1545471 AXLE GP-DRIVE & STEERING Parts scheme 1545471 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-3999 [2] CAP-PLUG  
2. 117-6108 [1] GEAR SET-BEVEL  
3. 229-2949 [1] TIE ROD AS (LH)  
3A. 237-7962 M [1] NUT (M22X1.5-THD)  
3B. 236-4482 [1] NUT  
3C. 236-4479 [1] BALL JOINT (LH)  
3D. 236-4481 [1] JOINT  
4. 229-2950 [1] TIE ROD AS (RH)  
4A. 237-7962 M [1] NUT (M22X1.5-THD)  
4B. 236-4482 [1] NUT  
4C. 236-4480 [1] BALL JOINT (RH)  
4D. 236-4481 [1] JOINT  
5. 178-8608 [4] CONE-TAPERED  
7. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
8. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
9. 130-6689 B [1] RING (15.1-MM THK)  
  130-6690 B [1] RING (15.2-MM THK)  
  130-6691 B [1] RING (15.26-MM THK)  
  130-6693 B [1] RING (15.3-MM THK)  
  130-6694 B [1] RING (15.33-MM THK)  
  130-6695 B [1] RING (15.36-MM THK)  
  130-6696 B [1] RING (15.38-MM THK)  
  130-6697 B [1] RING (15.4-MM THK)  
  130-6698 B [1] RING (15.43-MM THK)  
  130-6699 B [1] RING (15.46-MM THK)  
  130-6701 B [1] RING (15.48-MM THK)  
  130-6702 B [1] RING (15.5-MM THK)  
  130-6703 B [1] RING (15.53-MM THK)  
  130-6704 B [1] RING (15.56-MM THK)  
  130-6705 B [1] RING (15.58-MM THK)  
  130-6706 B [1] RING (15.6-MM THK)  
  130-6707 B [1] RING (15.63-MM THK)  
  130-6708 B [1] RING (15.66-MM THK)  
  130-6709 B [1] RING (15.68-MM THK)  
  130-6710 B [1] RING (15.7-MM THK)  
  130-6711 B [1] RING (15.73-MM THK)  
  130-6712 B [1] RING (15.8-MM THK)  
  130-6713 B [1] RING (15.83-MM THK)  
  130-6714 B [1] RING (15.86-MM THK)  
  130-6715 B [1] RING (15.9-MM THK)  
  130-6716 B [1] RING (15.93-MM THK)  
  130-6718 B [1] RING (15.96-MM THK)  
  130-6719 B [1] RING (16-MM THK)  
  130-6720 B [1] RING (16.03-MM THK)  
  130-6721 B [1] RING (16.06-MM THK)  
  130-6722 B [1] RING (16.1-MM THK)  
  130-6724 B [1] RING (16.13-MM THK)  
  130-6725 B [1] RING (16.16-MM THK)  
  130-6726 B [1] RING (16.2-MM THK)  
  130-6727 B [1] RING (16.23-MM)  
  130-6728 B [1] RING (16.26-MM THK)  
  130-6729 B [1] RING (16.3-MM THK)  
  130-6731 B [1] RING (16.4-MM THK)  
  130-6732 B [1] RING (16.76-MM THK)  
10. 054-6459 B [1] SHIM (1-MM THK)  
  054-6460 B [1] SHIM (1.05-MM THK)  
  054-6461 B [1] SHIM (1.1-MM THK)  
  054-6462 B [1] SHIM (1.15-MM THK)  
  054-6463 B [1] SHIM (1.2-MM THK)  
  054-6464 B [1] SHIM (1.25-MM THK)  
  054-6465 B [1] SHIM (1.3-MM THK)  
  054-6466 B [1] SHIM (1.35-MM THK)  
  054-6467 B [1] SHIM (1.4-MM THK)  
  054-6468 B [1] SHIM (1.45-MM THK)  
  054-6469 B [1] SHIM (1.5-MM THK)  
  054-6470 B [1] SHIM (1.55-MM THK)  
  054-6471 B [1] SHIM (1.6-MM THK)  
  054-6472 B [1] SHIM (0.95-MM THK)  
  054-6477 B [1] SHIM (0.85-MM THK)  
  054-6476 B [1] SHIM (0.75-MM THK)  
  054-6475 B [1] SHIM (0.7-MM THK)  
  054-6474 B [1] SHIM (0.65-MM THK)  
  054-6473 B [1] SHIM (0.9-MM THK)  
11. 130-6798 B [2] SHIM (1-MM THK)  
  130-6800 B [2] SHIM (1.1-MM THK)  
  130-6804 B [2] SHIM (1.3-MM THK)  
  130-6805 B [2] SHIM (1.35-MM THK)  
  130-6806 B [2] SHIM (1.4-MM THK)  
  130-6808 B [2] SHIM (1.5-MM THK)  
  130-6809 B [2] SHIM (1.55-MM THK)  
  130-6810 B [2] SHIM (1.6-MM THK)  
  130-6811 B [2] SHIM (1.65-MM THK)  
  130-6812 B [2] SHIM (1.7-MM THK)  
  130-6813 B [2] SHIM (1.75-MM THK)  
  130-6814 B [2] SHIM (1.8-MM THK)  
  130-6815 B [2] SHIM (1.85-MM THK)  
  130-6816 B [2] SHIM (1.9-MM THK)  
  130-6820 B [2] SHIM (2.1-MM THK)  
12. 130-6799 B [2] WASHER (1.05-MM THK)  
  130-6801 B [2] WASHER (62.2X75X1.15-MM THK)  
  130-6802 B [2] WASHER (62.2X75X1.2-MM THK)  
  130-6803 B [2] WASHER (62.2X75X1.25-MM THK)  
  130-6807 B [2] WASHER (1.45-MM THK)  
  130-6817 B [2] WASHER (62.2X75X1.95-MM THK)  
  130-6818 B [2] WASHER (62.2X75X2-MM THK)  
  130-6819 B [2] WASHER (62.2X75X2.05-MM THK)  
13. 130-7008 B [2] SHIM (0.2-MM THK)  
  130-7009 B [2] SHIM (0.3-MM THK)  
  130-7010 B [2] SHIM (0.4-MM THK)  
  130-7011 B [2] SHIM (0.6-MM THK)  
  130-7012 B [2] SHIM (0.8-MM THK)  
  130-7013 B [2] SHIM (1-MM THK)  
  130-7015 B [2] SHIM (1.6-MM THK)  
  130-7017 B [2] SHIM (2-MM THK)  
14. 008-1902 [3] CONE-BEARING  
15. 6S-3051 [3] CUP-BEARING  
16. 055-1986 [1] SEAL-LIP TYPE  
17. 130-7046 [1] FLANGE  
18. 130-7028 [1] PLATE  
19. 054-6480 [1] DISC  
20. 130-3005 M [1] NUT (M24X2-THD)  
21. 130-7024 [1] CASE  
22. 130-7048 [2] RING (13.5-MM THK)  
23. 130-7049 [2] RING (13.6-MM THK)  
24. 130-7050 [2] RING (13.7-MM THK)  
25. 130-3000 M [2] WASHER (53.2X71.9X1.9-MM THK)  
26. 119-7035 [2] GEAR  
27. 128-7855 [2] GEAR-PINION  
28. 9R-6994 [2] WASHER-THRUST  
29. 119-7036 [1] PIN  
30. 105-3484 M [12] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
31. 130-3010 [4] PIN  
32. 082-3077 [4] PIN  
33. 130-6675 [1] PIN  
34. 174-5698 [1] HOUSING  
35. 119-7056 [1] HOUSING  
36. 003-7501 [2] CONE-BEARING  
37. 6V-2200 [2] CUP-BEARING  
38. 054-6847 [1] SEAL-O-RING  
39. 6V-3303 M [15] BOLT (M16X2X60-MM)  
40. 054-6526 [15] DISC  
41. 9R-3175 [1] PLUG  
42. 130-6673 [1] PLUG  
43. 9X-0796 [4] SEAL-O-RING  
44. 130-2998 [2] BUSHING  
45. 130-6877 [2] SEAL  
46. 154-5404 [2] BEARING  
47. 130-7031 [1] HOUSING (LH)  
48. 119-7057 [1] HOUSING (RH)  
49. 077-3918 [2] BEARING  
50. 031-0426 [2] CUP-BEARING  
51. 119-7046 [2] SEAL  
52. 119-7047 [2] SEAL  
53. 119-7038 [2] PIN  
54. 130-7026 [2] PIN  
55. 130-6677 [16] BOLT (M12X1.75X30-MM)  
56. 5P-9439 [2] BALL BEARING  
57. 119-7053 [2] FLANGE  
58. 131-3816 [2] RING  
59. 7X-5771 [2] RING-RETAINING  
60. 119-7045 [2] SEAL  
61. 054-6589 [2] CLIP  
62. 130-3013 Y [1] SHAFT GP-DRIVE (RH)  
63. 130-3014 Y [1] SHAFT GP-DRIVE (LH)  
64. 9X-0640 [2] SEAL-O-RING  
65. 130-6879 [2] SEAL  
66. 178-7190 Y [1] CYLINDER GP-STEERING  
67. 2S-0480 [4] CUP-TAPERED ROLLER  
68. 130-3008 M [16] BOLT (M10X1.5X45-MM)  
69. 130-7047 [16] STUD  
70. 119-7060 M [2] SCREW-STOP (M14X1.5X50-MM)  
71. 130-3007 [2] NUT  
72. 119-7040 [2] GEAR-RING  
73. 119-7042 [2] SHAFT  
74. 130-7027 [2] CARRIER  
75. 169-4160 [6] GEAR  
76. 169-4161 [6] CONE-BEARING  
77. 169-4162 [6] CONE-BEARING  
78. 130-6878 [6] RING  
79. 119-7061 [2] PLUG  
80. 9R-3168 M [4] SCREW (M10X1.5X20-MM)  
81. 154-5405 [2] SEAL-LIP TYPE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28900199
 

174-5206: AXLE GP-DRIVE & STEERING

174-5206 AXLE GP-DRIVE & STEERING
S/N 6XN3616-4980; 1CR864-1085
PART OF 154-5467 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
i01146998 SEBP2890
1745206 AXLE GP-DRIVE & STEERING Parts scheme 1745206 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 493-8891 B [2] RING (11-MM THK)  
  493-8892 B [2] RING (11.1-MM THK)  
  493-8893 B [2] RING (11.2-MM THK)  
2. 117-6108 [1] GEAR SET-BEVEL  
3. 229-2950 [1] TIE ROD AS (RH)  
  236-4480 [1] BALL JOINT (RH)  
  236-4481 [1] JOINT  
  237-7962 M [1] NUT (M22X1.5-THD)  
4. 229-2949 [1] TIE ROD AS (LH)  
  236-4479 [1] BALL JOINT (LH)  
  236-4481 [1] JOINT  
  237-7962 M [1] NUT (M22X1.5-THD)  
5. 178-7190 Y [1] CYLINDER GP-STEERING  
6. 130-3850 [1] SHIM (0.8-MM THK)  
7. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
8. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
9. 130-6689 B [1] RING (15.1-MM THK)  
  130-6690 B [1] RING (15.2-MM THK)  
  130-6691 B [1] RING (15.26-MM THK)  
  130-6693 B [1] RING (15.3-MM THK)  
  130-6694 B [1] RING (15.33-MM THK)  
  130-6695 B [1] RING (15.36-MM THK)  
  130-6696 B [1] RING (15.38-MM THK)  
  130-6697 B [1] RING (15.4-MM THK)  
  130-6698 B [1] RING (15.43-MM THK)  
  130-6699 B [1] RING (15.46-MM THK)  
  130-6701 B [1] RING (15.48-MM THK)  
  130-6702 B [1] RING (15.5-MM THK)  
  130-6703 B [1] RING (15.53-MM THK)  
  130-6704 B [1] RING (15.56-MM THK)  
  130-6705 B [1] RING (15.58-MM THK)  
  130-6706 B [1] RING (15.6-MM THK)  
  130-6707 B [1] RING (15.63-MM THK)  
  130-6708 B [1] RING (15.66-MM THK)  
  130-6709 B [1] RING (15.68-MM THK)  
  130-6710 B [1] RING (15.7-MM THK)  
  130-6711 B [1] RING (15.73-MM THK)  
  130-6712 B [1] RING (15.8-MM THK)  
  130-6713 B [1] RING (15.83-MM THK)  
  130-6714 B [1] RING (15.86-MM THK)  
  130-6715 B [1] RING (15.9-MM THK)  
  130-6716 B [1] RING (15.93-MM THK)  
  130-6718 B [1] RING (15.96-MM THK)  
  130-6719 B [1] RING (16-MM THK)  
  130-6720 B [1] RING (16.03-MM THK)  
  130-6721 B [1] RING (16.06-MM THK)  
  130-6722 B [1] RING (16.1-MM THK)  
  130-6724 B [1] RING (16.13-MM THK)  
  130-6725 B [1] RING (16.16-MM THK)  
  130-6726 B [1] RING (16.2-MM THK)  
  130-6727 B [1] RING (16.23-MM)  
  130-6728 B [1] RING (16.26-MM THK)  
  130-6729 B [1] RING (16.3-MM THK)  
  130-6731 B [1] RING (16.4-MM THK)  
  130-6732 B [1] RING (16.76-MM THK)  
10. 054-6459 B [1] SHIM (1-MM THK)  
  054-6460 B [1] SHIM (1.05-MM THK)  
  054-6461 B [1] SHIM (1.1-MM THK)  
  054-6462 B [1] SHIM (1.15-MM THK)  
  054-6463 B [1] SHIM (1.2-MM THK)  
  054-6464 B [1] SHIM (1.25-MM THK)  
  054-6465 B [1] SHIM (1.3-MM THK)  
  054-6466 B [1] SHIM (1.35-MM THK)  
  054-6467 B [1] SHIM (1.4-MM THK)  
  054-6468 B [1] SHIM (1.45-MM THK)  
  054-6469 B [1] SHIM (1.5-MM THK)  
  054-6470 B [1] SHIM (1.55-MM THK)  
  054-6471 B [1] SHIM (1.6-MM THK)  
  054-6472 B [1] SHIM (0.95-MM THK)  
  054-6473 B [1] SHIM (0.9-MM THK)  
  054-6474 B [1] SHIM (0.65-MM THK)  
  054-6475 B [1] SHIM (0.7-MM THK)  
  054-6476 B [1] SHIM (0.75-MM THK)  
  054-6477 B [1] SHIM (0.85-MM THK)  
11. 008-1902 [3] CONE-BEARING  
12. 6S-3051 [3] CUP-BEARING  
13. 055-1986 [1] SEAL-LIP TYPE  
14. 130-7046 [1] FLANGE  
15. 130-7028 [1] PLATE  
16. 054-6480 [1] DISC  
17. 130-3005 M [1] NUT (M24X2-THD)  
18. 130-7024 [1] CASE  
19. 130-7048 B [2] RING (13.5-MM THK)  
  130-7049 B [2] RING (13.6-MM THK)  
  130-7050 B [2] RING (13.7-MM THK)  
20. 130-3000 M [2] WASHER (53.2X71.9X1.9-MM THK)  
21. 119-7035 [2] GEAR (24-TEETH)  
22. 128-7855 [2] GEAR-PINION  
23. 9R-6994 [2] WASHER-THRUST  
24. 119-7036 [1] PIN  
25. 105-3484 M [12] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
26. 130-3010 [4] PIN  
27. 082-3077 [4] PIN  
28. 130-6675 [1] PIN  
29. 119-7055 [1] HOUSING  
30. 119-7056 [1] HOUSING  
31. 130-6798 B [2] SHIM (1-MM THK)  
  130-6799 B [2] WASHER (1.05-MM THK)  
  130-6800 B [2] SHIM (1.1-MM THK)  
  130-6801 B [2] WASHER (62.2X75X1.15-MM THK)  
  130-6802 B [2] WASHER (62.2X75X1.2-MM THK)  
  130-6803 B [2] WASHER (62.2X75X1.25-MM THK)  
  130-6804 B [2] SHIM (1.3-MM THK)  
  130-6805 B [2] SHIM (1.35-MM THK)  
  130-6806 B [2] SHIM (1.4-MM THK)  
  130-6807 B [2] WASHER (1.45-MM THK)  
  130-6808 B [2] SHIM (1.5-MM THK)  
  130-6809 B [2] SHIM (1.55-MM THK)  
  130-6810 B [2] SHIM (1.6-MM THK)  
  130-6811 B [2] SHIM (1.65-MM THK)  
  130-6812 B [2] SHIM (1.7-MM THK)  
  130-6813 B [2] SHIM (1.75-MM THK)  
  130-6814 B [2] SHIM (1.8-MM THK)  
  130-6815 B [2] SHIM (1.85-MM THK)  
  130-6816 B [2] SHIM (1.9-MM THK)  
  130-6817 B [2] WASHER (62.2X75X1.95-MM THK)  
  130-6818 B [2] WASHER (62.2X75X2-MM THK)  
  130-6819 B [2] WASHER (62.2X75X2.05-MM THK)  
  130-6820 [2] SHIM (2.1-MM THK)  
32. 003-7501 [2] CONE-BEARING  
33. 6V-2200 [2] CUP-BEARING  
34. 054-6847 [1] SEAL-O-RING  
35. 6V-3303 M [15] BOLT (M16X2X60-MM)  
36. 054-6526 [15] DISC  
37. 9R-3175 [1] PLUG  
38. 130-6673 [1] PLUG  
39. 9X-0796 [4] SEAL-O-RING  
40. 130-2998 [2] BUSHING  
41. 130-6877 [2] SEAL  
42. 154-5404 [2] BEARING  
43. 130-7031 [1] HOUSING (LH)  
44. 119-7057 [1] HOUSING (RH)  
45. 077-3918 [2] BEARING  
46. 031-0426 [2] CUP-BEARING  
47. 119-7046 [2] SEAL  
48. 119-7047 [2] SEAL  
49. 130-7008 B [2] SHIM (0.2-MM THK)  
  130-7009 B [2] SHIM (0.3-MM THK)  
  130-7010 B [2] SHIM (0.4-MM THK)  
  130-7011 B [2] SHIM (0.6-MM THK)  
  130-7012 B [2] SHIM (0.8-MM THK)  
  130-7013 B [2] SHIM (1-MM THK)  
  130-7015 B [2] SHIM (1.6-MM THK)  
  130-7017 B [2] SHIM (2-MM THK)  
50. 119-7038 [2] PIN  
51. 130-7026 [2] PIN  
52. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
53. 5P-9439 [2] BALL BEARING  
54. 119-7053 [2] FLANGE  
55. 131-3816 [2] RING  
56. 7X-5771 [2] RING-RETAINING  
57. 119-7045 [2] SEAL  
58. 054-6589 [2] CLIP  
59. 130-3013 Y [1] SHAFT GP-DRIVE (RH)  
60. 130-3014 Y [1] SHAFT GP-DRIVE (LH)  
61. 9X-0640 [2] SEAL-O-RING  
62. 130-6879 [2] SEAL  
63. 6V-0832 [4] CONE  
64. 2S-0480 [4] CUP-TAPERED ROLLER  
65. 311-8193 M [16] BOLT (M10X1.5X45-MM)  
66. 130-7047 [16] STUD  
67. 119-7060 M [2] SCREW-STOP (M14X1.5X50-MM)  
68. 130-3007 [2] NUT  
69. 119-7040 [2] GEAR-RING  
70. 119-7042 [2] SHAFT  
71. 130-7027 [2] CARRIER  
72. 169-4160 [6] GEAR  
73. 169-4161 [6] CONE-BEARING  
74. 169-4162 [6] CONE-BEARING  
75. 130-6878 [6] RING  
76. 119-7061 [2] PLUG  
77. 9R-3168 M [4] SCREW (M10X1.5X20-MM)  
79. 154-5405 [2] SEAL-LIP TYPE  
80. 174-4623 [2] SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Quick Coupler Control (Loader) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Fuses - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Battery or Battery Cable - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
<B>Installing a Replacement Platform Harness As on Certain Backhoe Loaders</B> {1408}
Installing a Replacement Platform Harness As on Certain Backhoe Loaders {1408}
Technical Information Bulletin
Shortened Service Life Of The Air Ride Seat Relay
Shortened Service Life Of The Air Ride Seat Relay
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Improved All Wheel Drive (AWD) Switch Assembly Used In Production{1429}
1998/03/16
Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29
Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
A New Relay for the Air Conditioner Improves Machine Performance {1408, 7320}
2000/05/01
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
2000/07/10
A New Harness Is Available for Brooms {1408}
2000/06/05
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Improved Service Meter Used {7478}
2004/05/03
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 426C :

WIRING GP-STABILIZER ALARM
147-2732 WIRING GP-STABILIZER ALARM
WIRING GP-STABILIZER ALARM
136-7436 WIRING GP-STABILIZER ALARM
WIRING GP-RIDE CONTROL
175-6775 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
175-6771 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
163-9228 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
163-9227 WIRING GP-RIDE CONTROL
WIRING GP-POWER SHIFT
163-9198 WIRING GP-POWER SHIFT
WIRING GP-POWER SHIFT
141-9887 WIRING GP-POWER SHIFT
WIRING GP-STEERING
163-9226 WIRING GP-STEERING
AXLE & MTG GP-DRIVE & STEERING
112-2113 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-DRIVE & STEERING
154-5467 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-DRIVE & STEERING
154-5467 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-DRIVE & STEERING
154-5467 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-REAR
107-3716 AXLE & MTG GP-REAR
AXLE GP-DRIVE & STEERING
111-1523 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
154-5471 AXLE GP-DRIVE & STEERING

Truck sale:

Caterpillar 426C
 
Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.
 
35.900 
Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 426C, Construction
22,500 
Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.
 
On Request 
Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
Caterpillar 426C, Construction
28,000 
Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.