AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6Y-6767 TIP GP-LONG PART OF 172-4133, 172-4134, 172-4135, 172-4136, 172-4137, 172-4138, 172-4140, 172-4145, 172-4146 BUCKET GP-EXCAVATION AN ATTACHMENT 307B


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
CAB GP
AIR CONDITIONER GP
CAB GP
AIR CONDITIONER GP
CONSOLE GP

MINI HYD EXCAVATOR 307B MINI HYD EXCAVATOR AFB
 307B Excavator AFB00001-UP (MACHINE) POWERED BY 4M40 Engine SEBP2925 307B AFB   (1999)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
TIP GP-LONG
6Y-6767 TIP GP-LONG
 

#SEBP29250380
 

6Y-6767: TIP GP-LONG

6Y-6767 TIP GP-LONG
PART OF 172-4133, 172-4134, 172-4135, 172-4136, 172-4137, 172-4138, 172-4140, 172-4145, 172-4146 BUCKET GP-EXCAVATION
AN ATTACHMENT
i00394116 SEBP2925
6Y6767 TIP GP-LONG Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3222 [1] TIP-LONG  
2. 6Y-3228 [1] PIN  
3. 8E-6259 [1] RETAINER AS  
 

#SEBP29250381
 

174-0082: ACCESSORY GP-CAB

174-0082 ACCESSORY GP-CAB -ELECTRICAL COMPONENTS, WIPER
PART OF 145-5700 CAB GP
i01204821 SEBP2925
1740082 ACCESSORY GP-CAB Parts scheme 1740082 ACCESSORY GP-CAB Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 4I-5049 M [3] NUT-SPACER (M6X1-THD)  
3. 6C-3431 [1] ANTENNA  
4. 180-1718 M [2] NUT (M6X1-THD)  
5. 6C-9078 [4] WASHER  
6. 6C-9089 [5] NUT-CAP  
7. 6C-9119 [8] SCREW (M5X0.8X12-MM)  
8. 6C-9121 [1] BRACKET AS-LAMP  
9. 6C-9122 [2] LAMP (24-VOLT)  
10. 6C-9130 [9] WASHER (6X18X1-MM THK)  
11. 8Y-6967 [1] LOUVER AS-VENT  
12. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
13. 109-1270 [1] GROMMET  
14. 119-5840 [1] CONNECTION  
15. 120-4775 [1] CAP-WIPER  
16. 120-4777 [2] COVER  
17. 120-4778 [2] LINER  
18. 120-4779 [8] HOOK  
19. 121-6518 [1] GROMMET  
20. 124-5681 [2] SPACER  
21. 124-5686 [1] ARM AS  
22. 130-8108 [1] CAP-SUPPORT  
23. 135-1615 [1] HOLDER-CUP  
24. 139-6039 [2] NUT-RETAINER (U-TYPE)  
25. 140-0924 [1] RESISTOR AS  
26. 147-3719 [2] PLUG-BUTTON  
27. 168-7705 Y [1] MODULE GP-INSTRUMENT PANEL  
28. 171-1435 [1] HARNESS AS-CAB  
  117-5644 [2] BOOT  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
29. 171-1436 [1] HARNESS AS-MONITOR  
  3S-2093 [1] STRAP-CABLE  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
30. 174-9526 [1] COVER  
31. 174-9533 [1] PLATE  
32. 175-1190 [1] PLATE  
33. 189-8610 [1] BLADE AS-WIPER (800-MM)(FRONT)  
34. 176-0237 [1] MOTOR GP-WINDOW WIPER  
35. 176-2880 [1] PLATE  
36. 095-0827 [6] LOCKWASHER  
37. 117-5640 M [3] NUT (M6X1-THD)  
38. 122-8164 M [3] BOLT (M6X1X28-MM)  
39. 5C-2890 M [4] NUT (M6X1-THD)  
40. 8T-6412 M [2] SCREW-MACHINE (M6X1X20-MM)  
41. 9P-0719 [1] GROMMET  
42. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
43. 9X-2044 M [12] SCREW-TRUSS HEAD (M6X1X16-MM)  
44. 144-0195 E HOSE (230-CM)  
45. 5P-5639 D SEAL (1.2-M)  
46. 117-4473 E SEAL (35-CM)  
47. 189-2054 [1] SWITCH AS (WIPER MOTOR SAFETY STOP)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6V-8373 [2] SCREW-MACHINE (6-32X0.187-IN)  
48. 197-2663 [1] SUPPORT  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250382
 

178-2791: AIR CONDITIONER AR

178-2791 AIR CONDITIONER AR
PART OF 176-1055, 176-1056, 197-9152 OPERATOR AR
AN ATTACHMENT
i01259081 SEBP2925
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  166-4622 [1] AIR CONDITIONER GP  
  178-2792 Y [1] COMPRESSOR GP-REFRIGERANT  
  180-2655 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  178-2793 Y [1] LINES GP-AIR CONDITIONER  
  110-6393 [1] PLATE-INSTRUCTION (AIR CONDITIONER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250383
 

145-5700: CAB GP

145-5700 CAB GP
PART OF 169-1402 CAB GP
i01060268 SEBP2925
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  174-0647 Y [1] CAB GP  
  154-4706 Y [1] DOOR GP-CAB  
  175-1193 Y [1] WINDOW GP-FRONT  
  174-0082 Y [1] WIPER GP-WINDOW (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  112-3952 [1] KIT-WINDOW REPAIR  
  112-3953 [1] KIT-WINDOW REPAIR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250384
 

169-1402: CAB & MOUNTING GP

169-1402 CAB & MOUNTING GP
PART OF 165-8999 OPERATOR AR
i01060264 SEBP2925
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4139 M [7] BOLT (M12X1.75X30MM)  
  8T-6868 M [2] BOLT (M12X1.75X80MM)  
  145-5700 Y [1] CAB GP  
  5P-1076 [9] WASHER-HARD (4MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250385
 

174-0647: CAB GP

174-0647 CAB GP
PART OF 145-5700 CAB GP
i01204934 SEBP2925
1740647 CAB GP Parts scheme 1740647 CAB GP Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-4709 [1] CAB AS  
2. 154-4757 [1] GLASS-CAB  
3. 140-9109 [2] SUPPORT-GLASS  
4. 154-4758 [1] GLASS  
5. 154-4756 [1] GLASS-CAB  
6. 154-4807 [1] WINDOW  
7. 154-4795 [1] PLATE  
8. 6C-8584 M [3] SCREW (M6X1X8-MM)  
9. 180-1710 [1] SEAL  
10. 7X-2552 M [2] BOLT (M16X2X30-MM)  
11. 120-5737 [2] WASHER (17.5X40X4-MM THK)  
12. 119-8340 [2] SEAL  
13. 6C-9241 [4] BOLT  
14. 5V-5521 [4] SEAL-WASHER  
15. 180-1711 [1] SEAL  
16. 131-5380 [2] GROMMET-BLIND  
17. 176-2874 [1] LINER  
18. 176-2875 [1] LINER  
19. 176-2876 [1] LINER  
20. 176-2877 [1] LINER  
21. 9X-2044 M [30] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 6C-8972 [1] HOOK  
23. 6C-9131 [2] SCREW-TAPPING  
24. 175-1189 [6] LOUVER AS  
25. 139-6039 [12] NUT-RETAINER (U-TYPE)  
26. 175-1187 [1] PLATE (LH)  
27. 154-4799 [1] BOX  
28. 175-1188 [1] PLATE  
29. 6C-9125 [1] ASHTRAY AS  
30. 8T-4157 [1] STRIKER AS  
31. 6C-3982 [1] GUARD  
32. 6C-9238 [1] NUT  
33. 151-5715 [1] LOUVER AS-VENT  
34. 4Y-8774 M [2] SCREW-TAPPING  
35. 133-5514 [1] HAMMER  
36. 9N-1995 [2] RIVET-POP  
37. 154-4713 [1] PLATE  
38. 117-4473 E SEAL (60CM)  
39. 6V-3987 D SEAL (.13CM)  
40. 176-2878 [1] LINER  
41. 154-4796 [1] HANDLE AS  
42. 6C-8998 [2] CAP  
43. 109-1267 [4] WASHER  
44. 6C-9092 [4] WASHER  
45. 5C-7261 M [4] NUT (M8X1.25-THD)  
46. 6C-8996 [4] CAP  
47. 5P-6872 [1] MIRROR AS  
48. 6C-9000 [1] SUPPORT  
49. 6C-9001 [1] CLAMP  
50. 8T-1160 M [2] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
51. 154-4794 [1] HANDLE  
52. 6C-9087 [6] WASHER  
53. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
54. 154-4781 [1] BOX AS  
55. 176-2879 [1] SEAL  
56. 4I-1278 [1] FILTER ELEMENT-CAB AIR  
57. 121-4794 [1] SEAL  
58. 9X-2446 [1] FILM-IDENTIFICATION (CATERPILLAR)  
59. 109-5008 [2] BUMPER-CONICAL  
60. 6C-4000 B [4] SHIM (1-MM THK)  
61. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
62. 154-4784 [1] PLATE AS  
63. 8Y-6380 [1] LATCH AS  
64. 6V-7357 M [4] BOLT (M6X1X25-MM)  
65. 6C-9078 [5] WASHER  
66. 119-9425 [1] GUIDE  
67. 119-8338 M [2] SCREW (M6X1X20-MM)  
68. 154-4810 [1] LEVER  
69. 120-4831 [1] WASHER (18.5X32X1.5-MM THK)  
70. 154-4811 [1] SPACER-SPECIAL  
71. 119-8353 [1] SCREW-SPECIAL  
72. 154-4793 [1] SPRING  
73. 154-4809 [1] ROD  
74. 6C-8986 [1] CLIP-AXLE  
75. 3E-4364 [1] ROD END  
76. 5C-2890 M [1] NUT (M6X1-THD)  
77. 119-9428 [1] KNOB  
78. 145-3697 [1] STRIP  
79. 6C-9235 [1] PLATE-IDENTIFICATION (CAB)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP29250386
 

3E-1906: COMPRESSOR GP-REFRIGERANT

3E-1906 COMPRESSOR GP-REFRIGERANT
PART OF 178-2792 COMPRESSOR GP-REFRIGERANT
AN ATTACHMENT
i00357884 SEBP2925
3E1906 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-4532 C [1] PLUG AS  
2. 9X-7385 C [2] SEAL-O-RING  
3. 114-3469 [1] VALVE GP-RELIEF (REFRIGERANT COMPRESSOR)  
  9X-7378 [1] SEAL-O-RING  
4. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP29250387
 

178-2792: COMPRESSOR GP-REFRIGERANT

178-2792 COMPRESSOR GP-REFRIGERANT
PART OF 178-2791 AIR CONDITIONER AR
AN ATTACHMENT
i01259083 SEBP2925
1782792 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-1906 Y [1] COMPRESSOR GP-REFRIGERANT  
2. 7Y-1972 [1] SPACER (12.07X28X7-MM THK)  
3. 8N-3504 [1] V-BELT GP  
4. 085-9492 [1] BOLT (M8X1.25-THD)  
5. 116-0118 [1] CLIP  
6. 118-9864 [1] SHAFT  
7. 118-9865 [1] COLLAR  
8. 118-9867 [1] PULLEY AS  
9. 135-5711 [1] GUARD AS  
10. 176-7156 [1] BRACKET AS  
11. 180-2660 [1] PLATE  
12. 127-4839 M [1] BOLT (M10X1.25X25-MM)  
13. 128-7747 M [1] BOLT (M10X1.25X40-MM)  
14. 5C-7261 M [4] NUT (M8X1.25-THD)  
15. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
17. 8T-3647 M [2] BOLT (M8X1.25X80-MM)  
18. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
20. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
21. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250388
 

180-2655: CONDENSER & MTG GP-REFRIGERANT

180-2655 CONDENSER & MTG GP-REFRIGERANT
PART OF 178-2791 AIR CONDITIONER AR
AN ATTACHMENT
i01259207 SEBP2925
1802655 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-8679 [1] CONDENSER GP-REFRIGERANT  
2. 180-2658 [3] SPACER (12X22X85.8-MM THK)  
3. 8T-6685 M [3] BOLT (M10X1.5X110-MM)  
4. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP29250389
 

139-7220: CONSOLE GP-OPERATOR

139-7220 CONSOLE GP-OPERATOR
PART OF 165-8999 OPERATOR AR
i01065521 SEBP2925
1397220 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-0876 Y [1] CONSOLE GP-OPERATOR (RH)  
2. 177-0874 Y [1] CONSOLE GP-OPERATOR (LH)  
3. 7K-1181 [10] STRAP-CABLE  
4. 122-9618 [2] GUARD  
5. 122-9617 [2] GUARD  
6. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
7. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
9. 122-9655 [4] SUPPORT  
10. 122-9622 [2] SUPPORT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
307B Excavator
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2006/02/06
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 307B :

LOCK GP-QUICK COUPLER
169-0303 LOCK GP-QUICK COUPLER
174-2481 COUPLER AR-QUICK
172-0848 COUPLER AR-QUICK
169-0301 COUPLER AR-QUICK
172-4146 BUCKET GP-EXCAVATION
172-4145 BUCKET GP-EXCAVATION
172-4140 BUCKET GP-EXCAVATION
172-4138 BUCKET GP-EXCAVATION
ACCESSORY GP-CAB
174-0082 ACCESSORY GP-CAB
178-2791 AIR CONDITIONER AR
145-5700 CAB GP
169-1402 CAB & MOUNTING GP
CAB GP
174-0647 CAB GP
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
178-2792 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
180-2655 CONDENSER & MTG GP-REFRIGERANT

Truck sale:

Caterpillar 307B, Construction
22,000 USD 
Caterpillar 307B, Construction
- Crawler Excavators
ZIEGLER CAT
CATERPILLAR 307B 2000
 
CATERPILLAR 307B 2000
- TRACK EXCAVATORS
ZIEGLER INC
United States
 
 
CATERPILLAR 307B 2000
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR 307B 2000
$23,197 USD 
CATERPILLAR 307B 2000
- TRACK EXCAVATORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
2000 CAT 307B
USD $23,957 
2000 CAT 307B

Finning Canada
Edmonton, Alberta, Canada T5P4C3
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.