HYDRAULIC SYSTEM
VALVE GP-CONTROLIMPLEMENTS
BULLDOZER GPKITS
HYDRAULIC SYSTEM
VALVE GP-CONTROL
#SEBP29320600
106-9648: VALVE GP-TILT CONTROL
106-9648 VALVE GP-TILT CONTROL -DUAL
S/N ABK1-806
PART OF 163-1588 CONTROL AR-DUAL TILT
AN ATTACHMENT
S/N ABK1-806
PART OF 163-1588 CONTROL AR-DUAL TILT
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8001 C | [1] | PLUG | |
| 4J-7533 C | [4] | SEAL-O-RING | ||
| 2. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 8J-8621 | [2] | SPRING | |
| 4. | 9J-1722 | [2] | RETAINER | |
| 5. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 6. | 1P-4576 | [6] | FLANGE-HALF | |
| 7. | 9J-1716 | [2] | COVER | |
| 8. | 4J-0522 | [2] | SEAL-O-RING | |
| 9. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 10. | 3J-1907 C | [3] | SEAL-O-RING | |
| 11. | 3E-9205 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(TILT/TIP FUNCTION) | |
| 12. | 1P-4577 | [2] | FLANGE-HALF | |
| 13. | 9S-8004 C | [1] | PLUG (9/16-18-THD) | |
| 14. | 5S-7382 | [16] | BOLT (3/8-16X1.375-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320601
225-2321: VALVE GP-TILT CONTROL
225-2321 VALVE GP-TILT CONTROL -DUAL
S/N ABK807-UP
PART OF 163-1588 CONTROL AR-DUAL TILT
AN ATTACHMENT
S/N ABK807-UP
PART OF 163-1588 CONTROL AR-DUAL TILT
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-9205 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(DUAL TILT) | |
| 4. | 8J-8621 | [2] | SPRING | |
| 5. | 9J-1722 | [1] | RETAINER | |
| 7. | 223-4443 | [2] | COVER | |
| 8. | 223-4445 | [1] | RETAINER | |
| 10. | 1P-4576 | [6] | FLANGE-HALF | |
| 11. | 1P-4577 | [2] | FLANGE-HALF | |
| 12. | 3V-2431 | [4] | WASHER (10.2X16X2-MM THK) | |
| 13. | 4J-0522 | [2] | SEAL-O-RING | |
| 14. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 15. | 5S-7382 | [16] | BOLT (3/8-16X1.375-IN) | |
| 16. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 173-3993 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8001 | [1] | PLUG | ||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 18. | 162-0177 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320602
163-4550: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 102-6345 Y | [1] | BLADE GP-SEMI-UNIVERSAL | |
| 4. | 104-3154 Y | [1] | LIGHTING GP-FLOOD | |
| 5. | 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | |
| 6. | 163-1268 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 7. | 163-1269 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 8. | 168-6575 Y | [1] | MOUNTING GP-CYLINDER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320603
163-4550: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | |
| 2. | 102-6345 Y | [1] | BLADE GP-SEMI-UNIVERSAL | |
| 3. | 104-3154 Y | [1] | LIGHTING GP-FLOOD | |
| 4. | 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 163-1268 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 6. | 163-1269 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 246-1043 CY | [1] | MOUNTING GP-CYLINDER | |
| 8. | 246-1045 CY | [1] | PUSH ARM GP-STABILIZER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320604
163-4552: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 102-6345 Y | [1] | BLADE GP-SEMI-UNIVERSAL | |
| 4. | 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320605
163-4551: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 104-3154 Y | [1] | LIGHTING GP-FLOOD | |
| 4. | 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 106-7365 Y | [1] | BLADE GP-UNIVERSAL | |
| 6. | 163-1268 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 7. | 163-1269 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 8. | 168-6575 Y | [1] | MOUNTING GP-CYLINDER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320606
163-4551: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-1045 CY | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 104-3154 Y | [1] | LIGHTING GP-FLOOD | |
| 4. | 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 106-7365 Y | [1] | BLADE GP-UNIVERSAL | |
| 6. | 163-1268 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 7. | 163-1269 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 8. | 246-1043 CY | [1] | MOUNTING GP-CYLINDER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320607
163-4553: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | |
| 4. | 106-7365 Y | [1] | BLADE GP-UNIVERSAL | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER | ||
| (ON BACK OF MOLDBOARD NEAR TOP RH END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29320608
127-8749: KIT-OVERPACK
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7X-0404 | [14] | BOLT (1-8X2.5-IN) | ||
| 7X-2578 M | [6] | BOLT (M24X3X200-MM) | ||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | ||
| 8T-0672 M | [6] | BOLT (M24X3X160-MM) | ||
| 8T-4185 M | [4] | BOLT (M10X1.5X50-MM) | ||
| 8T-4196 M | [12] | BOLT (M10X1.5X35-MM) | ||
| 7X-2574 M | [12] | BOLT (M24X3X45-MM) | ||
| 7X-2573 M | [4] | BOLT (M24X3X40-MM) | ||
| 7X-2579 M | [6] | BOLT (M24X3X240-MM) | ||
| 5H-2095 | [4] | CLAMP-TUBE | ||
| 8C-3205 | [9] | FLANGE-HALF | ||
| 8T-4001 M | [12] | NUT (M24X3-THD) | ||
| 7X-0851 M | [6] | NUT (M24X3-THD) | ||
| 6J-5179 | [6] | RETAINER | ||
| 4J-5267 | [7] | SEAL-O-RING | ||
| 3G-9401 B | [15] | SHIM (0.8-MM THK) | ||
| 3G-0911 B | [15] | SHIM (0.8-MM THK) | ||
| 6I-8675 B | [15] | SHIM (0.6-MM THK) | ||
| 9X-2027 | [4] | WASHER (11X18X2-MM THK) | ||
| 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | ||
| 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29320609
143-1349: KIT-OVERPACK
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | ||
| 8T-4196 M | [15] | BOLT (M10X1.5X35-MM) | ||
| 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 8T-9399 | [10] | BOLT (3/4-10X2.25-IN) | ||
| 5P-2955 | [1] | BOLT (5/16-18X2.5-IN) | ||
| 8T-7338 M | [6] | BOLT (M16X2X45-MM) | ||
| 4L-6454 | [4] | BOLT (3/8-16X1-IN) | ||
| 8T-4186 M | [8] | BOLT (M10X1.5X40-MM) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-5460 M | [12] | BOLT (M20X2.5X40-MM) | ||
| 4L-9337 | [9] | BOLT (3/8-16X1.5-IN) | ||
| 5S-7382 | [15] | BOLT (3/8-16X1.375-IN) | ||
| 5S-7383 | [4] | BOLT (3/8-16X1.75-IN) | ||
| 7X-0365 | [12] | BOLT (3/4-10X1.5-IN) | ||
| 138-8455 | [9] | BOLT (1.5-6X114.3-MM) | ||
| 8C-8992 M | [4] | BOLT-LOCKING (M12X1.75X30-MM) | ||
| 115-0617 | [1] | BRACKET | ||
| 9M-2904 | [8] | CLAMP-HOSE | ||
| 8E-6334 | [2] | CLIP (TAB) | ||
| 8E-6332 | [2] | CLIP (SLOT) | ||
| 4P-8134 | [3] | CLIP (LADDER) | ||
| 3G-8057 | [3] | CLIP (SLOT) | ||
| 3G-8054 | [3] | CLIP (TAB) | ||
| 6V-8724 | [1] | ELBOW | ||
| 8T-1905 | [1] | ELBOW | ||
| 6V-8723 | [1] | ELBOW | ||
| 6V-8628 | [2] | ELBOW | ||
| 6V-9876 | [1] | ELBOW | ||
| 6V-9000 | [2] | ELBOW | ||
| 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 1P-4576 | [12] | FLANGE-HALF | ||
| 5P-8112 | [2] | GROMMET (50MM OD) | ||
| 6V-0974 | [3] | GROMMET (62MM OD) | ||
| 130-9191 | [6] | GROMMET (47.5MM OD) | ||
| 6V-8189 | [1] | NUT (5/16-18-THD) | ||
| 7T-4501 | [1] | PIN (90MM OAL) | ||
| 7T-4502 | [1] | PIN (183MM OAL) | ||
| 135-5114 | [1] | PIN (107MM OAL) | ||
| 135-5113 | [2] | PIN (117MM OAL) | ||
| 4T-2479 | [2] | PIN AS | ||
| 7T-7305 | [8] | PLATE | ||
| 154-4492 | [2] | PLUG-ADAPTER | ||
| 6K-3630 | [1] | RING | ||
| 7J-4169 | [2] | RING-SNAP | ||
| 3E-6757 | [6] | SEAL-LIP TYPE | ||
| 3E-6756 | [12] | SEAL-LIP TYPE | ||
| 3J-1907 | [2] | SEAL-O-RING | ||
| 4J-5267 | [6] | SEAL-O-RING | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 4J-5477 | [4] | SEAL-O-RING | ||
| 4J-0520 | [6] | SEAL-O-RING | ||
| 6V-8397 | [4] | SEAL-O-RING | ||
| 3J-7354 | [4] | SEAL-O-RING | ||
| 130-1977 | [8] | SHIELD | ||
| 139-2456 | [3] | SHIELD | ||
| 139-2455 | [3] | SHIELD | ||
| 136-7921 | [2] | SPACER (76.7X120X16-MM THK) | ||
| 6Y-9287 | [2] | SPACER (76.8X170X40-MM THK) | ||
| 5J-3576 | [1] | SPRING | ||
| 9X-6772 | [3] | STRAP-CABLE | ||
| 7K-1181 | [3] | STRAP-CABLE | ||
| 9X-8257 | [6] | WASHER (17.5X30X3.5-MM THK) | ||
| 8T-4167 | [2] | WASHER-HARD (26X44X4-MM THK) | ||
| 4T-3522 | [12] | WASHER (95X170X3-MM THK) | ||
| 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4994 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 7X-0537 | [10] | WASHER-HARD (40.5X67X6-MM THK) | ||
| 7X-0582 | [4] | WASHER-HARD (20X44.5X6-MM THK) | ||
| 7X-3391 | [4] | WASHER-HARD (13.5X32X6-MM THK) | ||
| 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 5P-1075 | [5] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 8T-4896 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| M | METRIC PART | |||
