ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
BATTERY GP
WIRING GP
ELECTRONICS GP-ENGINE
ELECTRONICS GP-IMPLEMENT
ELECTRICAL AND STARTING SYSTEM
ALARM GP
#SEBP29850170
128-8915: ALARM GP-TRAVEL
128-8915 ALARM GP-TRAVEL -BACK UP
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
Type 2
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
Type 2
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 213-9100 C | [1] | ALARM AS (BACKUP) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN)(INCLUDES RECEPTACLE AS & WEDGE) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 BE | SLEEVE | |||
| 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | ||
| 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | ||
| 128-8916 | [1] | BRACKET AS | ||
| 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP29850171
141-6157: ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
S/N 7ZR3677-10433
PART OF 173-0355 ENGINE AR-COMPLETE
S/N 7ZR3677-10433
PART OF 173-0355 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7577 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE) | |
| 2. | 141-4141 | [1] | BRACKET AS-ALTERNATOR | |
| 3. | 6V-8197 M | [1] | BOLT (M12X1.75X40-MM) | |
| 4. | 148-2101 | [1] | BRACKET-ALTERNATOR | |
| 5. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 6. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 7. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 8T-5001 M | [2] | BOLT (M12X1.75X130-MM) | |
| 9. | 198-1206 | [1] | BRACKET | |
| 10. | 7D-1649 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6V-8149 M | [3] | NUT (M12X1.75-THD) | |
| 13. | 9H-8260 | [1] | BOLT (1/2-13X6.25-IN) | |
| 14. | 8T-0106 M | [1] | BOLT (M12X1.75X100-MM) | |
| 15. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29850172
141-6157: ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
S/N 7ZR10434-UP
PART OF 173-0355 ENGINE AR-COMPLETE
S/N 7ZR10434-UP
PART OF 173-0355 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-4141 | [1] | BRACKET AS-ALTERNATOR | |
| 2. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 3. | 6V-8197 M | [1] | BOLT (M12X1.75X40-MM) | |
| 4. | 148-2101 | [1] | BRACKET-ALTERNATOR | |
| 5. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 6. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 7. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 8T-5001 M | [2] | BOLT (M12X1.75X130-MM) | |
| 9. | 198-1206 | [1] | BRACKET | |
| 10. | 7D-1649 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6V-8149 M | [3] | NUT (M12X1.75-THD) | |
| 13. | 9H-8260 | [1] | BOLT (1/2-13X6.25-IN) | |
| 14. | 8T-0106 M | [1] | BOLT (M12X1.75X100-MM) | |
| 15. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29850173
177-9953: ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N 7ZR10434-UP
24-VOLT, 80-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
S/N 7ZR10434-UP
24-VOLT, 80-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS (ALTERNATOR) | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 423-2775 | [1] | STATOR AS (24-VOLT, 95-AMPERE)(ALTERNATOR) | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS (ALTERNATOR) | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 J | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 J | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 J | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 199-7891 J | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT) | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 3 BEARINGS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET & NUT) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP29850174
3E-7577: ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
S/N 7ZR3677-UP
24-VOLT, 75-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
S/N 7ZR3677-UP
24-VOLT, 75-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2011 | [1] | SCREW-MACHINE (1/4-20X0.5-IN) | |
| 2. | 1H-3244 | [1] | LOCKWASHER | |
| 3. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 5. | 9S-2260 | [1] | PLATE-COVER | |
| 6. | 9S-2255 | [1] | COVER | |
| 7. | 9S-2262 | [1] | GASKET | |
| 8. | 9S-2544 | [6] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 9. | 9B-7233 | [10] | LOCKWASHER | |
| 10. | 9S-2437 | [5] | SCREW-TAPPING (10-24X19.05-MM) | |
| 11. | 8F-1434 | [5] | LOCKWASHER | |
| 12. | 5P-3418 | [1] | BEARING-ROLLER | |
| 13. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 14. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 15. | 9S-2393 | [3] | DIODE-NEGATIVE | |
| 16. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 17. | 9F-2247 | [1] | PLUG-PIPE | |
| 18. | 9S-2292 J | [1] | HEAT SINK AS | |
| 19. | 100-6656 | [1] | DIODE AS-ALTERNATOR | |
| 20. | 9S-9830 | [4] | SCREW-FORMING (8-32X19.05-MM) | |
| 21. | 8C-9660 | [4] | WASHER (4.6X7.9X0.8-MM THK) | |
| 22. | 9S-2300 | [4] | INSULATOR | |
| 23. | 9S-2301 | [1] | INSULATION | |
| 24. | 9S-2248 | [1] | COIL & SUPPORT AS | |
| 25. | 9N-3388 | [3] | BOLT (10-24X0.75-IN) | |
| 26. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR AIR) | |
| 27. | 7N-9023 | [1] | SCREW AS (8-32X26.9-MM) | |
| 28. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 29. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 30. | 100-6657 | [1] | PLATE | |
| 31. | 9S-2302 | [1] | ROTOR AS | |
| 32. | 9S-2005 | [1] | GROMMET | |
| 33. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 34. | 100-6658 | [1] | WIRE AS-ALTERNATOR | |
| 35. | 9S-2389 | [1] | STUD AS | |
| 36. | 9L-6770 | [1] | CAP-DUST | |
| 37. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 38. | 9S-2390 | [1] | RETAINER | |
| 39. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 40. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 41. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 42. | 5P-7807 | [1] | BALL BEARING | |
| 43. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 44. | 9S-3451 | [1] | STATOR AS | |
| 45. | 9S-2006 | [1] | INSULATOR | |
| 46. | 9S-2005 | [1] | GROMMET | |
| 47. | 9S-2014 | [3] | CLIP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9S-2013 | [1] | KIT-RELAY TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES BUSHING, O-RING & HARDWARE) | ||||
| 9S-2012 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES GASKETS,TERMINALS, & HARDWARE) | ||||
| 9S-2290 J | [3] | KIT-DIODE JUNCTION STUD (HEAT SINK) | ||
| (EACH INCLUDES INSULATOR & STUD) | ||||
| 9S-2291 J | [3] | KIT-POSITIVE DIODE (HEAT SINK) | ||
| (EACH INCLUDES DIODE) | ||||
| J | PART MARKED J INCLUDES KIT(S) MARKED J | |||
#SEBP29850175
125-4856: BATTERY & WIRING GP
125-4856 BATTERY & WIRING GP
S/N ALB1-UP; AGS1-UP
COLD WEATHER STARTING
AN ATTACHMENT
S/N ALB1-UP; AGS1-UP
COLD WEATHER STARTING
AN ATTACHMENT
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 128-8898 | [1] | CABLE AS | |
| (POS POST REAR BATTERY TO STARTER MOTOR) | ||||
| 5P-0761 E | CABLE (00-GA, RED)(380CM) | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 2. | 116-0242 | [1] | CABLE AS | |
| (NEG POST FRONT BATTERY TO DISCONNECT SWITCH) | ||||
| 5P-0747 E | CABLE (00-GA, BLACK)(56CM) | |||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 3. | 3T-5760 | [2] | BATTERY GP (12-VOLT, 750-CCA) | |
| 4. | 6W-6005 | [1] | HOLD-DOWN-BATTERY | |
| 5. | 116-0080 | [1] | CABLE AS (JUMPER)(JUMPER) | |
| 5P-0761 E | CABLE (00-GA, RED)(31CM) | |||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6050 | TERMINAL AS-BATTERY (NEGATIVE) | |||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 6. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 7. | 111-4837 | [5] | CLIP | |
| 8. | 5I-8304 | [1] | ROD | |
| 9. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 10. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 11. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 12. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP29850176
167-3623: BATTERY & WIRING GP
167-3623 BATTERY & WIRING GP
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-7888 M | [1] | BOLT (M6X1X90-MM) | |
| 2. | 111-4837 | [28] | CLIP | |
| 3. | 8T-4137 M | [58] | BOLT (M10X1.5X20-MM) | |
| 4. | 7Y-8167 | [1] | GROMMET (50-MM ID) | |
| 5. | 3S-2093 | [39] | STRAP-CABLE | |
| 6. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 7. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 8. | 5I-8304 | [1] | ROD | |
| 9. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 10. | 116-0229 | [2] | BRACKET AS | |
| 11. | 8T-4121 | [94] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 116-0230 | [1] | BRACKET AS | |
| 13. | 8T-4191 M | [20] | BOLT (M10X1.5X16-MM) | |
| 14. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 176-1397 | [1] | HARNESS AS-CHASSIS | |
| 3S-2093 | [6] | STRAP-CABLE | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5485 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECPTACLE AS, & WEDGE) | ||||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [13] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [5] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 2V-3216 | [1] | CLIP | |
| 17. | 132-1843 | [1] | BRACKET AS | |
| 18. | 132-1820 | [1] | BRACKET AS | |
| 19. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 20. | 116-0118 | [12] | CLIP | |
| 21. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 22. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 23. | 111-4838 | [10] | CLIP | |
| 24. | 111-4839 | [10] | STRAP | |
| 25. | 141-8659 | [1] | HARNESS AS-PLATFORM | |
| 3S-2093 | [9] | STRAP-CABLE | ||
| 111-4762 | [1] | PLUG AS-CONNECTOR | ||
| 111-4763 | [1] | PLUG AS-CONNECTOR | ||
| 102-8801 | [6] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [3] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [4] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [3] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [2] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [6] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2265 | [3] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 26. | 7Y-3196 | [2] | GROMMET | |
| 27. | 111-4836 | [24] | CLIP | |
| 28. | 5I-4366 | [1] | GROMMET | |
| 29. | 128-8884 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0761 E | CABLE (00-GA, RED)(410-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 30. | 3T-5760 | [2] | BATTERY GP (12-VOLT, 750-CCA) | |
| 31. | 6W-6005 | [1] | HOLD-DOWN-BATTERY | |
| 32. | 125-4727 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(27-CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 33. | 116-0080 | [1] | CABLE AS (JUMPER) | |
| 5P-0761 E | CABLE (00-GA, RED)(31-CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 34. | 4I-4653 | [2] | GROMMET | |
| 35. | 176-0971 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 36. | 143-3676 | [1] | HARNESS AS-ENGINE | |
| 110-6845 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 37. | 6G-2256 | [3] | CLAMP | |
| 38. | 6G-2263 | [4] | SPACER (10.5X19X28.5-MM THK) | |
| 39. | 2G-8767 | [4] | WASHER (10.5X60X3-MM THK) | |
| 40. | 8T-4185 M | [5] | BOLT (M10X1.5X50-MM) | |
| 41. | 132-1805 | [1] | STRAP AS-GROUND | |
| 42. | 4I-5426 | [1] | GROMMET | |
| 43. | 143-5375 | [1] | HARNESS AS-LIGHTING (CHASSIS, FRONT) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 44. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 45. | 091-9035 | [1] | SPACER (11X25X20-MM THK) | |
| 46. | 108-7553 | [1] | GROMMET | |
| 47. | 132-1818 | [1] | BRACKET AS | |
| 48. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 49. | 153-2447 | [1] | BRACKET AS | |
| 50. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY) | |
| 51. | 128-8886 | [1] | STRAP AS-GROUND | |
| 52. | 132-1845 | [1] | HARNESS AS-WIRING (HYD LOCKOUT, NEUTRAL START) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 53. | 9C-7045 | [1] | TUBE | |
| 54. | 121-1044 | [1] | HARNESS AS-POWER (NEUTRAL START RELAY) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 55. | 134-3341 | [1] | BRACKET AS | |
| 56. | 204-1613 | [1] | BRACKET AS | |
| 57. | 140-0880 | [1] | BRACKET AS | |
| 58. | 140-0873 | [1] | BRACKET AS | |
| 59. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 60. | 170-6985 | [1] | HARNESS AS-WIRING (ENGINE CONTROL, FAN CONTROL) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 61. | 7X-2621 M | [4] | BOLT (M10X1.5X12-MM) | |
| 62. | 7K-1181 | [4] | STRAP-CABLE | |
| 63. | 234-4661 | [1] | SHEET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29850177
124-2674: CONNECTION GP-ELECTRICAL
124-2674 CONNECTION GP-ELECTRICAL
S/N 7ZR3677-UP
M8X1.25X25MM GROUND STUD BELOW ECM
PART OF 173-0355 ENGINE AR-COMPLETE
S/N 7ZR3677-UP
M8X1.25X25MM GROUND STUD BELOW ECM
PART OF 173-0355 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP29850178
124-2673: CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
S/N 7ZR3677-UP
PART OF 173-0355 ENGINE AR-COMPLETE
S/N 7ZR3677-UP
PART OF 173-0355 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-3055 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 2. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM) | |
| 3. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 4. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 7. | 6V-3964 | [1] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 8. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 9. | 5P-7970 M | [1] | NUT (M8X1.25-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29850179
152-2133: CONTROL & MTG GP-IMPLEMENT
152-2133 CONTROL & MTG GP-IMPLEMENT
S/N ALB1-UP; AGS1-UP
PART OF 149-7567, 149-7568, 151-8351 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
S/N ALB1-UP; AGS1-UP
PART OF 149-7567, 149-7568, 151-8351 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 345B II EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
ALARM GP
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
