AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

147-2732 WIRING GP-STABILIZER ALARM S/N 7WN1100-1110; 1ER900-UP SIDESHIFT PART OF 147-3102 CONVERSION AR-CERTIFICATION AN ATTACHMENT 426C


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
BRAKING SYSTEM
BRAKE GP

BACKHOE LOADER 426C BACKHOE LOADER 1ER
 426C Backhoe Loader Center Pivot, Single Tilt 1ER00900-UP (MACHINE) POWERED BY 3054 Engine SEBP2994 426C 1ER   (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-RIDE CONTROL
175-6775 WIRING GP-RIDE CONTROL
WIRING GP-STABILIZER ALARM
136-7436 WIRING GP-STABILIZER ALARM
WIRING GP-STABILIZER ALARM
147-2732 WIRING GP-STABILIZER ALARM
WIRING GP-STEERING
163-9226 WIRING GP-STEERING
VALVE GP-BACKHOE NEUTRALIZER
141-7885 VALVE GP-BACKHOE NEUTRALIZER
INSTALLATION GP-A/C SHUTOFF
179-5772 INSTALLATION GP-A/C SHUTOFF
 

#SEBP29940190
 

147-2732: WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM
S/N 7WN1100-1110; 1ER900-UP
SIDESHIFT
PART OF 147-3102 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i00672199 SEBP2994
1472732 WIRING GP-STABILIZER ALARM Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-6876 [1] BRACKET  
2. 155-6228 [2] PLATE  
3. 142-3340 [1] SWITCH AS-LIMIT (STABILIZER LEG)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 8T-3998 M [2] BOLT (M4X0.7X12-MM)  
5. 3E-9362 [1] RELAY AS (12-VOLT)(ALARM)  
6. 147-2741 [1] HARNESS AS-WIRING (STABILIZER)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 136-5185 [1] ALARM-WARNING  
8. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
9. 3S-2093 [10] STRAP-CABLE  
10. 136-7437 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
11. 5C-8312 M [2] NUT (M4X0.7-THD)  
12. 4P-8134 [1] CLIP (LADDER)  
13. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
14. 147-2740 [1] HARNESS AS-PANEL (STABILIZER)  
  111-6795 [1] HOUSING-RELAY  
  111-6816 [1] LOCK  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [7] STRAP-CABLE  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACK PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-1476 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  112-9611 [4] TERMINAL-BLADE (18-GA TO 20-GA)  
  M   METRIC PART
 

#SEBP29940191
 

163-9226: WIRING GP-STEERING

163-9226 WIRING GP-STEERING
S/N 1ER900-UP
PART OF 154-5435 POWER TRAIN AR
i01135065 SEBP2994
1639226 WIRING GP-STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6257 [1] HARNESS AS-STEERING  
2. 148-4505 [3] SUPPRESSOR GP-ELECTRONIC  
3. 122-7137 [1] LAMP (12-VOLT)  
4. 164-9638 [1] HARNESS AS-STEERING  
5. 115-1970 [1] SWITCH AS-TOGGLE  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
6. 4P-8134 [1] CLIP (LADDER)  
7. 113-8490 [1] FUSE (10-AMPERE)  
8. 138-8454 M [8] SCREW-TRUSS HEAD (M4X0.7X10-MM)  
9. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES WEDGE)
10. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
11. 109-2356 [3] PLUG  
12. 128-5091 [1] SWITCH AS-PRESSURE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 3J-1907 [1] SEAL-O-RING  
14. 3S-2093 [26] STRAP-CABLE  
15. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
16. 104-5065 [1] BRACKET AS  
17. 104-5064 [1] COVER  
18. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
19. 107-9677 [1] SENSOR AS-POSITION (ALL WHEEL STEER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 SLEEVE (15 CM)  
20. 104-5066 [1] LEVER  
21. 9R-2806 [1] PIN  
22. 9R-2807 [1] CLIP (RETAINER)  
23. 8T-4138 M [3] BOLT (M6X1X20-MM)  
24. 8T-0337 M [3] SCREW-MACHINE (M4X0.7X12-MM)  
25. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
26. 104-5071 [1] CLAMP AS  
27. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 4P-7581 [1] CLIP (LADDER)  
29. 108-1540 [1] PLUG  
30. 3E-7572 [3] RELAY AS (12-VOLT)  
31. 106-8704 [2] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
32. 7X-2533 M [1] BOLT (M6X1X35-MM)  
33. 6V-9327 M [1] SETSCREW-SOCKET (M6X1-THD)  
34. 163-4531 [1] PLATE AS (LH)  
35. 7K-1181 [2] STRAP-CABLE  
36. 130-0146 [1] CONTROL GP-BUCKET POSITIONER  
37. 128-8567 [1] INDICATOR AS-AWS  
  122-7137 [1] LAMP (12-VOLT)  
  123-0306 [1] SOCKET AS  
38. 129-5078 [1] INDICATOR AS-REAR STEERING  
  4B-2043 [5] NUT (8-32-THD)  
  9B-7233 [5] LOCKWASHER  
39. 130-6255 [1] HARNESS AS-STEERING  
40. 130-6256 [1] HARNESS AS-STEERING  
41. 9W-0267 [3] CLIP-RELAY  
42. 161-2905 [1] HARNESS AS-STEERING  
43. 130-6662 [1] FILM  
44. 164-6906 C [1] FILM-INSTRUCTION (ALL WHEEL STEER)  
45. 163-4532 [1] PLATE AS (RH)  
46. 034-1432 [2] STRAP-CABLE  
47. 134-2305 [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP29940192
 

119-8191: AXLE & MTG GP-DRIVE & STEERING

119-8191 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N 1ER900-UP
PART OF 174-5439, 174-5440 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00522472 SEBP2994
1198191 AXLE & MTG GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 055-1990 [1] VENT  
2. 119-8190 Y [1] AXLE GP-DRIVE & STEERING (REAR)  
3. 130-2697 [2] VALVE-VENT  
4. 7X-2570 M [8] BOLT (M20X2.5X220-MM)  
5. 8T-4131 M [8] NUT (M20X2.5-THD)  
6. 8T-5439 [16] WASHER-HARD (21.5X45X6-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29940193
 

114-0165: AXLE & MTG GP-REAR

114-0165 AXLE & MTG GP-REAR
S/N 7WN1100-1110
PART OF 154-5452, 154-5453, 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00784958 SEBP2994
1140165 AXLE & MTG GP-REAR Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-5434 [1] VALVE AS-VENT (FINAL DRIVE, AXLE)  
2. 156-2857 CY [1] AXLE GP-REAR  
3. 7X-2570 M [8] BOLT (M20X2.5X220-MM)  
4. 8T-4131 M [8] NUT (M20X2.5-THD)  
5. 8T-5439 [16] WASHER-HARD (21.5X45X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29940194
 

119-8190: AXLE GP-DRIVE & STEERING

119-8190 AXLE GP-DRIVE & STEERING -REAR
S/N 1ER900-UP
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
i00522471 SEBP2994
1198190 AXLE GP-DRIVE & STEERING Parts scheme 1198190 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-2462 [10] SPRING  
2. 8U-3591 [10] SPACER (6.5X15X7-MM THK)  
3. 7X-2619 M [10] BOLT (M6X1X10-MM)  
4. 110-0878 [10] PIN  
5. 110-4748 [16] NUT  
6. 009-3819 [1] CONE-BEARING  
7. 110-0880 [2] CARRIER-DISC  
8. 110-4752 B [4] SHIM  
9. 110-0876 [6] SCREW  
10. 1G-6735 [8] PIN-GROOVED  
11. 110-0877 [6] PIN  
12. 110-4736 [6] RING  
13. 110-0870 [10] PLATE  
14. 110-0842 [8] DISC-FRICTION  
15. 110-4757 [2] RING  
16. 110-4755 [2] RING  
17. 110-4756 [2] RING  
18. 110-4758 [2] RING  
19. 2D-9191 [1] CONE-BEARING  
20. 110-0158 B [1] RING (16-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
  225-5014 B [1] RING (16.56-MM THK)  
  225-5015 B [1] RING (16.62-MM THK)  
  225-5016 B [1] RING (16.64-MM THK)  
  225-5017 B [1] RING (16.68-MM THK)  
  225-5018 B [1] RING (16.72-MM THK)  
  225-5024 B [1] RING (16.84-MM THK)  
  225-5025 B [1] RING (16.88-MM THK)  
  225-5026 B [1] RING (16.9-MM THK)  
  225-5027 B [1] RING (16.94-MM THK)  
  225-5019 B [1] RING (16.74-MM THK)  
  225-5020 B [1] RING (16.76-MM THK)  
  225-5021 B [1] RING (16.76-MM THK)  
  225-5022 B [1] RING (16.78-MM THK)  
  225-5023 B [1] RING (16.82-MM THK)  
21. 110-0159 B [2] WASHER-THRUST (3-MM THK)  
  110-0160 B [2] WASHER-THRUST (2.7-MM THK)  
  110-0161 B [2] WASHER-THRUST (2.5-MM THK)  
  110-0162 B [2] WASHER-THRUST (2.2-MM THK)  
  110-0163 B [2] WASHER-THRUST (2-MM THK)  
  110-0164 B [2] WASHER-THRUST (1.7-MM THK)  
  110-0165 B [2] WASHER-THRUST (1.5-MM THK)  
22. 5W-5547 B [1] DISC (1-MM THK)  
  5W-5548 B [1] DISC (1.1-MM THK)  
  5W-5549 B [1] DISC (1.2-MM THK)  
  5W-5550 B [1] DISC (1.3-MM THK)  
  5W-5551 B [1] DISC (1.4-MM THK)  
  5W-5552 B [1] DISC (1.5-MM THK)  
  5W-5553 B [1] DISC (1.6-MM THK)  
  5W-5554 B [1] DISC (1.7-MM THK)  
  5W-5555 B [1] DISC (1.05-MM THK)  
  5W-5556 B [1] DISC (1.15-MM THK)  
  5W-5557 B [1] DISC (1.25-M THK)  
  5W-5558 B [1] DISC (1.35-MM THK)  
  5W-5559 B [1] DISC (1.45-MM THK)  
  5W-5560 B [1] DISC (1.55-MM THK)  
  5W-5561 B [1] DISC (1.65-MM THK)  
  5W-5562 B [1] DISC (1.75-MM THK)  
  5W-6400 B [1] DISC (1.8-MM THK)  
  8U-2752 B [1] DISC (0.7-MM THK)  
  8U-2753 B [1] DISC (0.8-MM THK)  
  8U-2754 B [1] DISC (0.9-MM THK)  
23. 110-2461 M [8] BOLT (M16X1.5X100-MM)  
24. 110-2457 [4] PIN-SPRING  
25. 110-2458 [4] PIN-SPRING  
26. 110-2467 [1] SHAFT-DIFFERENTIAL  
27. 213-9783 [6] BEARING-ROLLER  
28. 248-1017 [4] WASHER-THRUST  
29. 110-0855 [2] GEAR-AXLE BEVEL  
30. 110-0852 [2] DISC-PRESSURE  
31. 110-0854 [8] DISC-FRICTION  
32. 110-0853 [10] PLATE  
33. 253-9741 [1] CASE-DIFFERENTIAL  
34. 190-8591 [12] WASHER (64.5X72.1X2-MM THK)  
35. 213-9759 [4] GEAR-BEVEL  
36. 193-1132 [6] GEAR-PLANETARY  
37. 190-8590 [12] RING-SNAP  
38. 110-0867 [1] HOUSING-AXLE DRIVE  
39. 110-0883 [2] HOUSING-BRAKE  
40. 190-8567 B [1] SHIM (1-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  193-1125 B [1] SHIM (0.1-MM THK)(0.1MM THK)  
  193-1127 B [1] SHIM (0.15-MM THK)  
  193-1128 B [1] WASHER (0.1-MM THK)  
  193-1129 B [1] WASHER (0.15-MM THK)  
  193-1130 B [1] WASHER (0.5-MM THK)  
41. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
42. 110-4746 [1] SEAL  
43. 110-0856 [1] CAP-PROTECTION  
44. 113-5988 [1] FLANGE  
45. 110-4791 [1] HOUSING-AXLE  
46. 110-4749 [2] PLUG  
47. 110-2463 [1] BEARING-ROLLER  
48. 110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  110-0170 B [2] WASHER (0.55-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2961 B [2] SHIM (1.7-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
49. 110-0875 [2] PISTON  
50. 110-4753 [2] BEARING  
51. 008-1902 [2] CONE-BEARING  
52. 110-4790 [1] HOUSING-AXLE  
53. 110-4792 [1] HOUSING-BRAKE (LH)  
  110-4793 [1] HOUSING-BRAKE (RH)  
54. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
55. 110-0134 B [1] SHIM (0.4-MM THK)  
  110-0131 B [1] SHIM (1-MM THK)  
  110-0132 B [1] SHIM (0.8-MM THK)  
  110-0133 B [1] SHIM (0.6-MM THK)  
  B [1] SHIM (0.3-MM THK)  
  110-0136 B [1] SHIM (0.2-MM THK)  
  110-0126 B [1] SHIM (2-MM THK)  
  110-0127 B [1] SHIM (1.8-MM THK)  
  110-0128 B [1] SHIM (1.6-MM THK)  
56. 110-0859 [2] PIN-BEARING  
57. 096-9988 M [8] BOLT (M14X2X30-MM)  
58. 9R-6947 [2] SEAL-O-RING  
59. 9R-6952 [2] CAP-SEALING  
60. 110-0884 [2] HUB  
61. 110-0874 [20] BOLT-WHEEL  
62. 110-4745 [2] SEAL-O-RING  
63. 110-2464 [4] BEARING-ROLLER  
64. 110-0866 [2] CARRIER-PLANETARY  
65. 110-0862 [2] GEAR-RING  
66. 098-2996 [4] SEAL-O-RING  
67. 6S-3051 [2] CUP-BEARING  
68. 110-4737 [6] RING-RETAINING  
69. 4D-8648 [2] CUP-BEARING  
70. 110-0865 [2] SHAFT-SUN GEAR  
71. 009-3818 [1] CUP-BEARING  
72. 110-0846 [2] RING-RETAINING  
73. 2D-9190 [1] CUP-BEARING  
74. 110-0863 [2] WASHER-THRUST  
75. 110-0844 [2] WASHER-THRUST  
76. 110-0849 [2] NUT-SLOTTED  
77. 110-0861 [2] WASHER-TAB  
78. 9R-6965 M [4] SCREW (M10X1.5X20-MM)  
79. 110-0851 [2] SEAL  
80. 110-0850 [4] SEAL  
81. 110-0839 [2] BUSHING  
82. 110-0864 [2] RING-RETAINING  
83. 110-2460 M [4] BOLT (M12X1.5X95-MM)  
84. 8T-6385 M [32] BOLT (M16X2X180-MM)  
85. 110-2455 M [4] BOLT (M12X1.5X20-MM)  
86. 110-4733 [2] UNIVERSAL JOINT  
87. 8T-4779 M [8] BOLT (M16X2X35-MM)  
88. 110-0860 [2] PIN-BEARING  
89. 130-2703 [1] GEAR SET  
90. 110-0843 [1] WASHER (31X56X6-MM THK)  
91. 110-0848 M [1] NUT (M30X1.5-THD)  
92. 110-2456 [4] PIN-SPRING  
93. 110-0840 [2] TIE ROD  
94. 110-0871 [1] GUIDE  
95. 110-0847 [1] PLUG-SCREW  
96. 9R-6953 [6] SEAL-O-RING  
97. 109-4440 [5] PLUG  
98. 110-0841 [1] ROD-PISTON  
99. 110-4754 [1] GASKET  
100. 110-4759 [2] GUIDE-PISTON  
101. 110-0873 [1] CYLINDER  
102. 110-4742 [2] SEAL-O-RING  
103. 110-4739 [12] RING-SNAP  
104. 110-4735 [4] RING-GUIDE  
105. 5W-6392 [2] SEAL-O-RING  
106. 5W-6391 [2] SCRAPER  
107. 110-0872 [1] GUIDE  
108. 110-2459 M [8] BOLT (M14X2X105-MM)  
109. 6V-2652 [2] CONE-BEARING  
110. 110-0858 [2] CAP-SEALING  
111. 110-4743 [2] SEAL-O-RING  
112. 9R-3171 [4] FITTING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP29940195
 

154-5472: AXLE GP-DRIVE & STEERING

154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N 7WN1100-1110; 1ER900-UP
PART OF 174-5451, 175-6774 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
i00985303 SEBP2994
1545472 AXLE GP-DRIVE & STEERING Parts scheme 1545472 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-5698 [1] HOUSING (RH)  
2. 119-7056 [1] HOUSING (LH)  
3. 9R-3175 [1] PLUG  
5. 130-7008 B [2] SHIM (0.2-MM THK)  
  130-7009 B [2] SHIM (0.3-MM THK)  
  130-7010 B [2] SHIM (0.4-MM THK)  
  130-7011 B [2] SHIM (0.6-MM THK)  
  130-7012 B [2] SHIM (0.8-MM THK)  
  130-7013 B [2] SHIM (1-MM THK)  
  130-7015 B [2] SHIM (1.6-MM THK)  
  130-7017 B [2] SHIM (2-MM THK)  
6. 9X-0796 [3] SEAL-O-RING  
7. 130-2998 [2] BUSHING  
8. 130-6877 [2] SEAL  
9. 154-5404 [2] BEARING  
10. 9R-3168 M [4] SCREW (M10X1.5X20-MM)  
11. 119-7061 [2] PLUG  
12. 130-6878 [6] RING  
13. 169-4161 [6] CONE-BEARING  
14. 169-4162 [6] CONE-BEARING  
15. 169-4160 [6] GEAR  
16. 130-7027 [2] CARRIER  
17. 119-7042 [2] SHAFT  
18. 119-7040 [2] GEAR-RING  
19. 130-3007 [2] NUT  
20. 119-7060 M [2] SCREW-STOP (M14X1.5X50-MM)  
21. 130-7047 [16] STUD  
22. 130-3008 M [16] BOLT (M10X1.5X45-MM)  
23. 2S-0480 [4] CUP-TAPERED ROLLER  
24. 178-8608 [4] CONE-TAPERED  
25. 130-6879 [2] SEAL  
26. 9X-0640 [2] SEAL-O-RING  
27. 130-3014 Y [1] SHAFT GP-DRIVE (LH)  
28. 130-3013 Y [1] SHAFT GP-DRIVE (RH)  
29. 054-6589 [2] CLIP  
30. 119-7045 [2] SEAL  
31. 7X-5771 [2] RING-RETAINING  
32. 131-3816 [2] RING  
33. 119-7053 [2] FLANGE  
34. 5P-9439 [2] BALL BEARING  
35. 130-6677 [16] BOLT (M12X1.75X30-MM)  
36. 130-7026 [2] PIN  
37. 119-7038 [2] PIN  
38. 119-7047 [2] SEAL  
39. 119-7046 [2] SEAL  
40. 031-0426 [2] CUP-BEARING  
41. 077-3918 [2] BEARING  
42. 119-7057 [1] HOUSING (RH)  
43. 130-7031 [1] HOUSING (LH)  
44. 054-6459 B [1] SHIM (1-MM THK)  
  054-6460 B [1] SHIM (1.05-MM THK)  
  054-6461 B [1] SHIM (1.1-MM THK)  
  054-6462 B [1] SHIM (1.15-MM THK)  
  054-6463 B [1] SHIM (1.2-MM THK)  
  054-6464 B [1] SHIM (1.25-MM THK)  
  054-6465 B [1] SHIM (1.3-MM THK)  
  054-6466 B [1] SHIM (1.35-MM THK)  
  054-6467 B [1] SHIM (1.4-MM THK)  
  054-6468 B [1] SHIM (1.45-MM THK)  
  054-6469 B [1] SHIM (1.5-MM THK)  
  054-6470 B [1] SHIM (1.55-MM THK)  
  054-6471 B [1] SHIM (1.6-MM THK)  
  054-6472 B [1] SHIM (0.95-MM THK)  
  054-6473 B [1] SHIM (0.9-MM THK)  
  054-6474 B [1] SHIM (0.65-MM THK)  
  054-6475 B [1] SHIM (0.7-MM THK)  
  054-6476 B [1] SHIM (0.75-MM THK)  
  054-6477 B [1] SHIM (0.85-MM THK)  
  130-3850 B [1] SHIM (0.8-MM THK)  
45. 130-6689 B [1] RING (15.1-MM THK)  
  130-6690 B [1] RING (15.2-MM THK)  
  130-6691 B [1] RING (15.26-MM THK)  
  130-6693 B [1] RING (15.3-MM THK)  
  130-6694 B [1] RING (15.33-MM THK)  
  130-6695 B [1] RING (15.36-MM THK)  
  130-6696 B [1] RING (15.38-MM THK)  
  130-6697 B [1] RING (15.4-MM THK)  
  130-6698 B [1] RING (15.43-MM THK)  
  130-6699 B [1] RING (15.46-MM THK)  
  130-6701 B [1] RING (15.48-MM THK)  
  130-6702 B [1] RING (15.5-MM THK)  
  130-6703 B [1] RING (15.53-MM THK)  
  130-6704 B [1] RING (15.56-MM THK)  
  130-6705 B [1] RING (15.58-MM THK)  
  130-6706 B [1] RING (15.6-MM THK)  
  130-6707 B [1] RING (15.63-MM THK)  
  130-6708 B [1] RING (15.66-MM THK)  
  130-6709 B [1] RING (15.68-MM THK)  
  130-6710 B [1] RING (15.7-MM THK)  
  130-6711 B [1] RING (15.73-MM THK)  
46. 130-6712 B [1] RING (15.8-MM THK)  
  130-6713 B [1] RING (15.83-MM THK)  
  130-6714 B [1] RING (15.86-MM THK)  
  130-6715 B [1] RING (15.9-MM THK)  
  130-6716 B [1] RING (15.93-MM THK)  
  130-6718 B [1] RING (15.96-MM THK)  
  130-6719 B [1] RING (16-MM THK)  
  130-6720 B [1] RING (16.03-MM THK)  
  130-6721 B [1] RING (16.06-MM THK)  
  130-6722 B [1] RING (16.1-MM THK)  
  130-6724 B [1] RING (16.13-MM THK)  
  130-6725 B [1] RING (16.16-MM THK)  
  130-6726 B [1] RING (16.2-MM THK)  
  130-6727 B [1] RING (16.23-MM)  
  130-6728 B [1] RING (16.26-MM THK)  
  130-6729 B [1] RING (16.3-MM THK)  
  130-6731 B [1] RING (16.4-MM THK)  
  130-6732 B [1] RING (16.76-MM THK)  
47. 130-6798 B [2] SHIM (1-MM THK)  
  130-6799 B [2] WASHER (1.05-MM THK)  
  130-6800 B [2] SHIM (1.1-MM THK)  
  130-6801 B [2] WASHER (62.2X75X1.15-MM THK)  
  130-6802 B [2] WASHER (62.2X75X1.2-MM THK)  
  130-6803 B [2] WASHER (62.2X75X1.25-MM THK)  
  130-6804 B [2] SHIM (1.3-MM THK)  
  130-6805 B [2] SHIM (1.35-MM THK)  
  130-6806 B [2] SHIM (1.4-MM THK)  
  130-6807 B [2] WASHER (1.45-MM THK)  
  130-6808 B [2] SHIM (1.5-MM THK)  
  130-6809 B [2] SHIM (1.55-MM THK)  
  130-6810 B [2] SHIM (1.6-MM THK)  
  130-6811 B [2] SHIM (1.65-MM THK)  
  130-6812 B [2] SHIM (1.7-MM THK)  
  130-6813 B [2] SHIM (1.75-MM THK)  
  130-6814 B [2] SHIM (1.8-MM THK)  
  130-6815 B [2] SHIM (1.85-MM THK)  
  130-6816 B [2] SHIM (1.9-MM THK)  
  130-6817 B [2] WASHER (62.2X75X1.95-MM THK)  
  130-6818 B [2] WASHER (62.2X75X2-MM THK)  
  130-6819 B [2] WASHER (62.2X75X2.05-MM THK)  
  130-6820 B [2] SHIM (2.1-MM THK)  
48. 130-6673 [1] PLUG  
49. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
50. 6V-3303 M [15] BOLT (M16X2X60-MM)  
51. 178-7190 Y [1] CYLINDER GP-STEERING  
52. 6V-2200 [2] CUP-BEARING  
53. 003-7501 [2] CONE-BEARING  
54. 130-6675 [1] PIN  
55. 082-3077 [4] PIN  
56. 130-3010 [4] PIN (13.5MM DIA)  
57. 105-3484 M [12] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
58. 119-7036 [1] PIN  
59. 9R-6994 [2] WASHER-THRUST  
60. 128-7855 [2] GEAR-PINION  
61. 107-5608 [1] GEAR SET-BEVEL  
62. 130-3000 M [2] WASHER (53.2X71.9X1.9-MM THK)  
63. 130-7048 B [2] RING (13.5-MM THK)  
  130-7049 B [2] RING (13.6-MM THK)  
  130-7050 B [2] RING (13.7-MM THK)  
64. 130-7024 [1] CASE  
65. 130-3005 M [1] NUT (M24X2-THD)  
66. 054-6480 [1] DISC  
67. 130-7028 [1] PLATE  
68. 130-7046 [1] FLANGE  
69. 055-1986 [1] SEAL-LIP TYPE  
70. 6S-3051 [3] CUP-BEARING  
71. 008-1902 [3] CONE-BEARING  
72. 119-7035 [2] GEAR  
73. 130-3809 [1] TIE ROD AS (RH)  
  130-5010 M [1] LOCKNUT (M22X1.5-THD)  
  130-6674 [1] CLAMP  
  130-6880 [1] BALL JOINT  
  130-7043 [1] JOINT  
74. 130-3012 [1] TIE ROD AS (LH)  
  130-5010 M [1] LOCKNUT (M22X1.5-THD)  
  130-6674 [1] CLAMP  
  130-6881 [1] BALL JOINT  
  130-7043 [1] JOINT  
75. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
76. 154-5405 [2] SEAL-LIP TYPE  
77. 054-6847 [1] SEAL-O-RING  
78. 054-6526 [15] DISC  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29940196
 

154-5472: AXLE GP-DRIVE & STEERING

154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N 1ER900-UP
PART OF 175-6774 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
i01948250 SEBP2994
1545472 AXLE GP-DRIVE & STEERING Parts scheme 1545472 AXLE GP-DRIVE & STEERING Parts scheme 1545472 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-3999 [2] CAP-PLUG  
2. 119-7035 [2] GEAR  
3. 229-2949 [1] TIE ROD AS (LH)  
3A. 6C-9221 M [1] NUT (M24X1.5-THD)  
3B. 236-4481 [1] JOINT  
3C. 236-4479 [1] BALL JOINT (LH)  
  237-7962 M [1] NUT (M22X1.5-THD)  
4. 229-2950 [1] TIE ROD AS (RH)  
4A. 6C-9221 M [1] NUT (M24X1.5-THD)  
4B. 236-4481 [1] JOINT  
4C. 236-4480 [1] BALL JOINT (RH)  
  237-7962 M [1] NUT (M22X1.5-THD)  
5. 178-7190 Y [1] CYLINDER GP-STEERING  
6. 130-7017 B [2] SHIM (2-MM THK)  
  130-7015 B [2] SHIM (1.6-MM THK)  
  130-7013 B [2] SHIM (1-MM THK)  
  130-7012 B [2] SHIM (0.8-MM THK)  
  130-7011 B [2] SHIM (0.6-MM THK)  
  130-7010 B [2] SHIM (0.4-MM THK)  
  130-7009 B [2] SHIM (0.3-MM THK)  
  130-7008 B [2] SHIM (0.2-MM THK)  
7. 107-5608 [1] GEAR SET-BEVEL  
8. 3N-4969 [1] CONE-BEARING (TAPERED ROLLER)  
9. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
10. 130-6689 BC [1] RING (15.1-MM THK)  
  130-6690 B [1] RING (15.2-MM THK)  
  130-6691 B [1] RING (15.26-MM THK)  
  130-6693 B [1] RING (15.3-MM THK)  
  130-6694 B [1] RING (15.33-MM THK)  
  130-6695 B [1] RING (15.36-MM THK)  
  130-6696 B [1] RING (15.38-MM THK)  
  130-6697 B [1] RING (15.4-MM THK)  
  130-6698 B [1] RING (15.43-MM THK)  
  130-6699 B [1] RING (15.46-MM THK)  
  130-6701 B [1] RING (15.48-MM THK)  
  130-6702 B [1] RING (15.5-MM THK)  
  130-6703 B [1] RING (15.53-MM THK)  
  130-6704 B [1] RING (15.56-MM THK)  
  130-6705 B [1] RING (15.58-MM THK)  
  130-6706 B [1] RING (15.6-MM THK)  
  130-6707 B [1] RING (15.63-MM THK)  
  130-6708 B [1] RING (15.66-MM THK)  
  130-6709 B [1] RING (15.68-MM THK)  
  130-6710 B [1] RING (15.7-MM THK)  
  130-6711 B [1] RING (15.73-MM THK)  
  130-6712 B [1] RING (15.8-MM THK)  
  130-6713 B [1] RING (15.83-MM THK)  
  130-6714 B [1] RING (15.86-MM THK)  
  130-6715 B [1] RING (15.9-MM THK)  
  130-6716 B [1] RING (15.93-MM THK)  
  130-6718 B [1] RING (15.96-MM THK)  
  130-6719 B [1] RING (16-MM THK)  
  130-6720 B [1] RING (16.03-MM THK)  
  130-6721 B [1] RING (16.06-MM THK)  
  130-6722 B [1] RING (16.1-MM THK)  
  130-6724 B [1] RING (16.13-MM THK)  
  130-6725 B [1] RING (16.16-MM THK)  
  130-6726 B [1] RING (16.2-MM THK)  
  130-6727 B [1] RING (16.23-MM)  
  130-6728 B [1] RING (16.26-MM THK)  
  130-6729 B [1] RING (16.3-MM THK)  
  130-6731 B [1] RING (16.4-MM THK)  
  130-6732 B [1] RING (16.76-MM THK)  
11. 154-5405 [2] SEAL-LIP TYPE  
12. 243-5336 M [4] BOLT (M10X1.5X20-MM)  
13. 119-7061 [2] PLUG  
14. 130-6878 [6] RING  
15. 264-2769 [6] BEARING  
16. 264-2768 [6] BEARING  
17. 264-2767 [6] GEAR  
18. 264-2766 [2] CARRIER-PLANETARY  
19. 119-7042 [2] SHAFT  
20. 119-7040 [2] GEAR-RING  
21. 130-3007 [2] NUT  
22. 119-7060 M [2] SCREW-STOP (M14X1.5X50-MM)  
23. 130-7047 [16] STUD  
24. 311-8193 M [16] BOLT (M10X1.5X45-MM)  
25. 2S-0480 [4] CUP-TAPERED ROLLER  
26. 178-8608 [4] CONE-TAPERED  
27. 130-6879 [2] SEAL  
28. 9X-0640 [2] SEAL-O-RING  
29. 130-3014 Y [1] SHAFT GP-DRIVE (LH)  
30. 130-3013 Y [1] SHAFT GP-DRIVE (RH)  
31. 054-6589 [2] CLIP  
32. 119-7045 [2] SEAL  
33. 7X-5771 [2] RING-RETAINING  
34. 131-3816 [2] RING  
35. 119-7053 [2] FLANGE  
36. 5P-9439 [2] BALL BEARING  
37. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
38. 130-7026 [2] PIN  
39. 119-7038 [2] PIN  
40. 128-7855 [2] GEAR-PINION  
41. 9R-6994 [2] WASHER-THRUST  
42. 119-7036 [1] PIN  
43. 130-6798 B [2] SHIM (1-MM THK)  
  130-6799 B [2] WASHER (1.05-MM THK)  
  130-6800 B [2] SHIM (1.1-MM THK)  
  130-6801 B [2] WASHER (62.2X75X1.15-MM THK)  
  130-6802 B [2] WASHER (62.2X75X1.2-MM THK)  
  130-6803 B [2] WASHER (62.2X75X1.25-MM THK)  
  130-6804 B [2] SHIM (1.3-MM THK)  
  130-6805 B [2] SHIM (1.35-MM THK)  
  130-6806 B [2] SHIM (1.4-MM THK)  
  130-6807 B [2] WASHER (1.45-MM THK)  
  130-6808 B [2] SHIM (1.5-MM THK)  
  130-6809 B [2] SHIM (1.55-MM THK)  
  130-6810 B [2] SHIM (1.6-MM THK)  
  130-6811 B [2] SHIM (1.65-MM THK)  
  130-6812 B [2] SHIM (1.7-MM THK)  
  130-6813 B [2] SHIM (1.75-MM THK)  
  130-6814 B [2] SHIM (1.8-MM THK)  
  130-6815 B [2] SHIM (1.85-MM THK)  
  130-6816 B [2] SHIM (1.9-MM THK)  
  130-6817 B [2] WASHER (62.2X75X1.95-MM THK)  
  130-6818 B [2] WASHER (62.2X75X2-MM THK)  
  130-6819 B [2] WASHER (62.2X75X2.05-MM THK)  
  130-6820 B [2] SHIM (2.1-MM THK)  
44. 105-3484 M [12] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
45. 130-3010 [4] PIN  
46. 082-3077 [4] PIN  
47. 130-6675 [1] PIN  
48. 119-7047 [2] SEAL  
49. 054-6459 B [1] SHIM (1-MM THK)  
  054-6460 B [1] SHIM (1.05-MM THK)  
  054-6461 B [1] SHIM (1.1-MM THK)  
  054-6462 B [1] SHIM (1.15-MM THK)  
  054-6463 B [1] SHIM (1.2-MM THK)  
  054-6464 B [1] SHIM (1.25-MM THK)  
  054-6465 B [1] SHIM (1.3-MM THK)  
  054-6466 B [1] SHIM (1.35-MM THK)  
  054-6467 B [1] SHIM (1.4-MM THK)  
  054-6468 B [1] SHIM (1.45-MM THK)  
  054-6469 B [1] SHIM (1.5-MM THK)  
  054-6470 B [1] SHIM (1.55-MM THK)  
  054-6471 B [1] SHIM (1.6-MM THK)  
  054-6472 B [1] SHIM (0.95-MM THK)  
  054-6473 B [1] SHIM (0.9-MM THK)  
  054-6474 B [1] SHIM (0.65-MM THK)  
  054-6475 B [1] SHIM (0.7-MM THK)  
  054-6476 B [1] SHIM (0.75-MM THK)  
  054-6477 B [1] SHIM (0.85-MM THK)  
50. 119-7046 [2] SEAL  
51. 031-0426 [2] CUP-BEARING  
52. 077-3918 [2] BEARING  
53. 119-7057 [1] HOUSING (RH)  
54. 130-7031 [1] HOUSING (LH)  
55. 154-5404 [2] BEARING  
56. 130-6877 [2] SEAL  
57. 130-2998 [2] BUSHING  
58. 9X-0796 [1] SEAL-O-RING  
59. 130-6673 [1] PLUG  
60. 9R-3175 [1] PLUG  
61. 054-6526 [15] DISC  
62. 6V-3303 M [15] BOLT (M16X2X60-MM)  
63. 054-6847 [1] SEAL-O-RING  
64. 6V-2200 [2] CUP-BEARING  
65. 003-7501 [2] CONE-BEARING  
66. 174-5698 [1] HOUSING (RH)  
67. 119-7056 [1] HOUSING (LH)  
68. 008-1902 [3] CONE-BEARING  
69. 6S-3051 [3] CUP-BEARING  
70. 055-1986 [1] SEAL-LIP TYPE  
71. 130-7046 [1] FLANGE  
72. 130-7028 [1] PLATE  
73. 054-6480 [1] DISC  
74. 130-3005 M [1] NUT (M24X2-THD)  
75. 130-7024 [1] CASE  
76. 130-7048 B [2] RING (13.5-MM THK)  
  130-7049 B [2] RING (13.6-MM THK)  
  130-7050 B [2] RING (13.7-MM THK)  
79. 130-3000 M [2] WASHER (53.2X71.9X1.9-MM THK)  
80. 493-8891 B [2] RING (11-MM THK)  
  493-8892 B [2] RING (11.1-MM THK)  
  493-8893 B [2] RING (11.2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29940197
 

174-5451: AXLE GP-DRIVE & STEERING

174-5451 AXLE GP-DRIVE & STEERING
S/N 7WN1100-1110
PART OF 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i01215599 SEBP2994
1745451 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-7082 [1] WASHER (2.266X4X0.031-IN THK)  
2. 9R-9702 [2] WASHER (56X100X1.6-MM THK)  
3. 112-9629 [1] PIN  
4. 154-5472 Y [1] AXLE GP-DRIVE & STEERING (FRONT)  
5. 165-8996 [2] WASHER-THRUST (55.5X100.5X5-MM THK)  
6. 8T-5041 M [1] BOLT (M12X1.75X120-MM)  
7. 8T-8549 M [1] LOCKNUT (M12X1.75-THD)  
8. 173-5479 [1] SWITCH AS-ROCKER (ALL WHEEL DRIVE, BRAKE)  
  111-7899 [1] GASKET  
9. 113-8491 [1] FUSE (15-AMPERE)  
10. 3E-9362 [1] RELAY AS (12-VOLT)  
11. 106-8704 [2] SUPPRESSOR AS-ARC  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29940198
 

175-6774: AXLE GP-DRIVE & STEERING

175-6774 AXLE GP-DRIVE & STEERING
S/N 1ER900-UP
PART OF 174-5439, 174-5440 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i01216214 SEBP2994
1756774 AXLE GP-DRIVE & STEERING Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-7082 [1] WASHER (2.266X4X0.031-IN THK)  
2. 9R-9702 [2] WASHER (56X100X1.6-MM THK)  
3. 112-9629 [1] PIN  
4. 154-5472 Y [1] AXLE GP-DRIVE & STEERING  
5. 165-8996 [2] WASHER-THRUST (55.5X100.5X5-MM THK)  
6. 8T-5041 M [1] BOLT (M12X1.75X120-MM)  
7. 8T-8549 M [1] LOCKNUT (M12X1.75-THD)  
8. 173-5479 [1] SWITCH AS-ROCKER (ALL WHEEL DRIVE, BRAKE)  
  111-7899 [1] GASKET  
9. 113-8491 [1] FUSE (15-AMPERE)  
10. 174-5452 [1] WIRE AS  
11. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29940199
 

156-2857: AXLE GP-REAR

156-2857 AXLE GP-REAR
S/N 7WN1100-1110
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
i00783340 SEBP2994
1562857 AXLE GP-REAR Parts scheme 1562857 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5837 [2] SHAFT AS  
    (EACH INCLUDES)
1A. 9R-5219 [8] BOLT-SPECIAL  
2. 9R-2407 [1] RETAINER AS  
2A. 3N-6408 [1] CUP-BEARING (TAPERED ROLLER)  
2B. 4K-5843 [1] CUP-BEARING (TAPERED ROLLER)  
3. 156-1928 [1] HOUSING AS (LH)  
3A. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
3B. 8S-9151 [1] CUP-BEARING  
3C. [2] STUD  
3D. 156-1930 [1] GEAR-RING (56-TEETH)  
4. [1] HOUSING AS  
4A. 6Y-7652 [1] CUP-BEARING (TAPERED ROLLER)  
4B. 8S-9151 [1] CUP-BEARING  
4C. [2] STUD  
4D. 156-1930 [1] GEAR-RING (56-TEETH)  
5. 186-4117 [2] CARRIER AS  
    (EACH INCLUDES)
5A. 7T-6652 [1] CONE-BEARING (TAPERED ROLLER)  
5B. 9R-2417 [3] WASHER (33.07X48.38X1.06-MM THK)  
5C. 9R-2418 [6] WASHER (32.94X57.21X0.78-MM THK)  
5D. 9R-2419 [3] KIT-BEARING  
5E. 9R-2420 [1] RETAINER  
5F. 9R-2421 [3] SHAFT  
5G. 186-4118 [3] GEAR-PLANETARY (20-TEETH)  
6. 9F-2167 [2] SCREW-PURGE (3/8-24X1.164-IN)  
7. 9R-0883 [1] PIN  
8. 9R-0823 [1] LEVER AS  
9. 9R-2427 B [1] SHIM (0.965-MM THK)  
  9R-2428 B [1] SHIM (1.118-MM THK)  
  9R-2429 B [1] SHIM (1.27-MM THK)  
  9R-2430 B [1] SHIM (1.422-MM THK)  
  9R-2431 B [1] SHIM (1.575-MM THK)  
  9R-2432 B [1] SHIM (1.727-MM THK)  
  9R-2433 B [1] SHIM (1.88-MM THK)  
  9R-2434 B [1] SHIM (2.032-MM THK)  
10. 9R-2425 [2] WASHER (23.088X69.6X9.52-MM THK)  
11. 156-2572 [1] HOUSING-REAR BRAKE (RH)  
12. 9R-9410 [2] SEAL-REAR BRAKE  
13. 9R-9409 [2] SEAL-REAR BRAKE  
14. 9R-9408 [2] PISTON-REAR BRAKE  
15. 9R-2446 B [1] SPACER (45.86X50.98X31.858-MM THK)  
  9R-2447 B [1] SPACER (45.86X50.98X31.908-MM THK)  
  9R-2448 B [1] SPACER (45.86X50.98X31.959-MM THK)  
  9R-2449 B [1] SPACER (45.86X50.98X32.01-MM THK)  
  9R-2450 B [1] SPACER (45.86X50.98X32.061-MM THK)  
  9R-2451 B [1] SPACER (45.86X50.98X32.112-MM THK)  
  9R-2452 B [1] SPACER (45.86X50.98X32.162-MM THK)  
  9R-2453 B [1] SPACER (45.86X50.98X32.213-MM THK)  
  9R-2454 B [1] SPACER (45.86X50.98X32.264-MM THK)  
  9R-2455 B [1] SPACER (45.86X50.98X32.315-MM THK)  
  9R-2456 B [1] SPACER (45.86X50.98X32.366-MM THK)  
  9R-2457 B [1] SPACER (45.86X50.98X32.416-MM THK)  
  9R-2458 B [1] SPACER (45.86X50.98X32.467-MM THK)  
  9R-2459 B [1] SPACER (45.86X50.98X32.518-MM THK)  
  9R-2460 B [1] SPACER (45.86X50.98X32.569-MM THK)  
16. 230-4017 [8] DISC-BRAKE  
17. 9R-2474 [2] PIN  
18. 9R-9401 [8] PLATE  
19. 8S-4740 [12] BOLT (9/16-12X5-IN)  
20. 9R-9398 [2] MANIFOLD-BRAKE TUBE  
21. 8H-1607 [2] SEAL-O-RING  
22. 9R-2424 [2] GEAR (16-TEETH)  
23. 8M-8157 [4] SEAL-O-RING  
24. 2A-4576 [1] CUP-BEARING (TAPERED ROLLER)  
25. 5L-9656 [1] CONE-BEARING (TAPERED ROLLER)  
26. 9X-8880 [25] BOLT (5/8-11X2-IN)  
27. 9R-2508 [1] HOUSING  
28. 113-1147 [1] FLANGE  
29. 9R-2497 [1] SEAL  
30. 9R-2501 [1] WASHER (32.5X60.5X5.6-MM THK)  
31. 9R-2502 [1] NUT (1-1/4-18-THD)  
32. 3B-5302 [1] PIN-COTTER  
33. 9R-2498 [1] RETAINER  
34. 3B-4509 [6] LOCKWASHER  
35. 3K-3379 [6] BOLT (9/16-12X1-IN)  
36. 9X-8883 [1] BOLT (5/8-11X2.75-IN)  
37. 5L-9018 [4] BOLT-SOCKET HEAD (1/4-20X1.75-IN)  
38. 8T-6760 [2] PLUG-PIPE (1-1/2-11-1/2 NPT)  
39. 9R-2499 [1] SEAL AS  
40. 9R-2496 [1] SEAL  
41. 7T-6653 [1] CONE-BEARING (TAPERED ROLLER)  
42. 118-5839 [2] SEAL-REAR AXLE  
43. 9R-2512 [1] SEAL  
44. 030-1957 [2] CONE-BEARING (TAPERED ROLLER)  
45. 7T-6654 [1] CONE-BEARING (TAPERED ROLLER)  
46. 9R-2505 [1] SEAL  
47. 9R-2504 [1] SHAFT  
48. 9R-2507 M [1] SCREW-SPECIAL  
49. 7T-7621 [1] BEARING AS  
50. 9R-2494 [1] RING  
51. 9R-2480 [1] CASE AS  
52. 2S-0480 [1] CUP-TAPERED ROLLER  
53. 2S-0479 [1] CONE-BEARING (TAPERED ROLLER)  
54. 9R-2506 [1] FORK  
55. 9R-2492 [1] WASHER (64.389X78.74X3.124-MM THK)  
56. 9R-2493 [1] RING  
57. 9R-2488 [1] GEAR (16-TEETH)  
58. 9R-2482 [1] COUPLING  
59. 282-9821 [1] HOUSING-BRAKE (LH)  
60. 9R-2486 [1] SPRING  
61. 9R-2483 [1] ADAPTER  
62. 9R-2484 [2] BUSHING-TERMINAL  
63. 9R-2490 [2] WASHER (76.2X101.6X1.524-MM THK)  
64. 9R-2491 [1] SPIDER  
65. 9R-9403 [4] PINION  
66. 9R-2489 [4] WASHER-SPRING  
67. 9R-2485 [8] BOLT (1/2-13X2.87-IN)  
68. 9R-2495 [2] SEAL  
69. 118-9117 [1] GEAR SET  
70. 9R-6671 M [12] BOLT (1/2-20X1.62-IN)  
71. 2M-2570 [12] LOCKNUT (1/2-20-THD)  
72. 9R-2503 [1] BLOCK  
73. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
74. 0T-0318 [2] BOLT (7/16-14X1-IN)  
75. 9R-2487 [1] GEAR (16-TEETH)  
76. 9R-2435 B [2] SPACER (22.86X53.85X1.25-MM THK)  
  9R-2436 B [2] SPACER (22.86X53.85X1.35-MM THK)  
  9R-2437 B [2] SPACER (22.86X53.85X1.45-MM THK)  
  9R-2438 B [2] SPACER (22.86X53.85X1.55-MM THK)  
  9R-2439 B [2] SPACER (22.86X53.85X1.65-MM THK)  
  9R-2440 B [2] SPACER (22.86X53.85X1.75-MM THK)  
  9R-2441 B [2] SPACER (22.86X53.85X1.85-MM THK)  
  9R-2442 B [2] SPACER (22.86X53.85X1.96-MM THK)  
  9R-2443 B [2] SPACER (22.86X53.85X2.06-MM THK)  
  9R-2444 B [2] SPACER (22.86X53.85X2.16-MM THK)  
  9R-2445 B [2] SPACER (22.86X53.85X2.26-MM THK)  
77. 9R-6602 [2] PLUG-MAGNETIC  
78. 5P-0540 [4] NUT-HEX FULL (9/16-18-THD)  
79. 282-9822 [1] HOUSING-BRAKE (RH)  
80. 156-1933 [1] HOUSING-REAR BRAKE (LH)  
81. 9R-2426 [2] LOCK  
82. 9R-2466 M [2] BOLT (7/8-14X2.2-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery - Recycle
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Quick Coupler Control (Loader) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Battery Electrolyte Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Auxiliary Circuit Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Battery or Battery Cable - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Fuses - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Quick Coupler Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Battery or Battery Cable - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
<B>Installing a Replacement Platform Harness As on Certain Backhoe Loaders</B> {1408}
Installing a Replacement Platform Harness As on Certain Backhoe Loaders {1408}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Transmission Electronic Control Module (ECM)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Switches
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Sensors
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Diagnostic Operation
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Relays
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Electrical Components And Connector Locations
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Initial Troubleshooting Procedure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Using the Diagnostic Indicator to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Using Electronic Control Analyzer Programmer (ECAP) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Power Supply for Electronic Control Module (Transmission) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Diagnostic Indicator - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Fifth Gear Lockout Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Switch (Neutralizer) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Neutral Lock Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Switch (Parking Brake) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Electronic Control Module (ECM) - Configure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Electronic Control Module (ECM) - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
System Schematic
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Glossary of Terms
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0520 FMI 02 Transmission Configuration Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0650 FMI 02 Harness Code Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0683 FMI 03 Relay (Parking Brake) Voltage Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0683 FMI 05 Relay (Parking Brake) Current Below Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0683 FMI 06 Relay (Parking Brake) Current Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Troubleshooting Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
System Schematic
Machine Security System
Electric Starting System - Test
3054 Engine
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
Electrical Component and Connector Locations
Machine Security System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Improved All Wheel Drive (AWD) Switch Assembly Used In Production{1429}
1998/03/16
Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29
Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
A New Relay for the Air Conditioner Improves Machine Performance {1408, 7320}
2000/05/01
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
2000/07/10
A New Harness Is Available for Brooms {1408}
2000/06/05
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Improved Service Meter Used {7478}
2004/05/03
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 426C :

WIRING GP-STABILIZER ALARM
136-7436 WIRING GP-STABILIZER ALARM
WIRING GP-RIDE CONTROL
175-6775 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
175-6771 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
166-9301 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
166-9300 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
163-9228 WIRING GP-RIDE CONTROL
WIRING GP-RIDE CONTROL
163-9227 WIRING GP-RIDE CONTROL
WIRING GP-POWER SHIFT
163-9198 WIRING GP-POWER SHIFT
WIRING GP-STEERING
163-9226 WIRING GP-STEERING
AXLE & MTG GP-DRIVE & STEERING
119-8191 AXLE & MTG GP-DRIVE & STEERING
AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
AXLE GP-DRIVE & STEERING
119-8190 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
154-5472 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
154-5472 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
174-5451 AXLE GP-DRIVE & STEERING
AXLE GP-DRIVE & STEERING
175-6774 AXLE GP-DRIVE & STEERING

Truck sale:

Caterpillar 426C
 
Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.
 
35.900 
Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 426C, Construction
22,500 
Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.
 
On Request 
Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
Caterpillar 426C, Construction
28,000 
Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.