POWER TRAIN
AXLE GPBRAKING SYSTEM
BRAKE GPPOWER TRAIN
WHEEL GPPOWER TRAIN AR
POWER TRAIN
AXLE GP
#SEBP29970200
114-0165: AXLE & MTG GP-REAR
114-0165 AXLE & MTG GP-REAR
S/N 2BR1000-UP
PART OF 154-5452, 154-5453, 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 2BR1000-UP
PART OF 154-5452, 154-5453, 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5F-5434 | [1] | VALVE AS-VENT (FINAL DRIVE, AXLE) | |
| 2. | 156-2857 CY | [1] | AXLE GP-REAR | |
| 3. | 7X-2570 M | [8] | BOLT (M20X2.5X220-MM) | |
| 4. | 8T-4131 M | [8] | NUT (M20X2.5-THD) | |
| 5. | 8T-5439 | [16] | WASHER-HARD (21.5X45X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29970201
119-8190: AXLE GP-DRIVE & STEERING
119-8190 AXLE GP-DRIVE & STEERING -REAR
S/N 1RR1100-1100
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
S/N 1RR1100-1100
RATIO 20.94
PART OF 119-8191 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-2462 | [10] | SPRING | |
| 2. | 8U-3591 | [10] | SPACER (6.5X15X7-MM THK) | |
| 3. | 7X-2619 M | [10] | BOLT (M6X1X10-MM) | |
| 4. | 110-0878 | [10] | PIN | |
| 5. | 110-4748 | [16] | NUT | |
| 6. | 009-3819 | [1] | CONE-BEARING | |
| 7. | 110-0880 | [2] | CARRIER-DISC | |
| 8. | 110-4752 B | [4] | SHIM | |
| 9. | 110-0876 | [6] | SCREW | |
| 10. | 1G-6735 | [8] | PIN-GROOVED | |
| 11. | 110-0877 | [6] | PIN | |
| 12. | 110-4736 | [6] | RING | |
| 13. | 110-0870 | [10] | PLATE | |
| 14. | 110-0842 | [8] | DISC-FRICTION | |
| 15. | 110-4757 | [2] | RING | |
| 16. | 110-4755 | [2] | RING | |
| 17. | 110-4756 | [2] | RING | |
| 18. | 110-4758 | [2] | RING | |
| 19. | 2D-9191 | [1] | CONE-BEARING | |
| 20. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 225-5014 B | [1] | RING (16.56-MM THK) | ||
| 225-5015 B | [1] | RING (16.62-MM THK) | ||
| 225-5016 B | [1] | RING (16.64-MM THK) | ||
| 225-5017 B | [1] | RING (16.68-MM THK) | ||
| 225-5018 B | [1] | RING (16.72-MM THK) | ||
| 225-5024 B | [1] | RING (16.84-MM THK) | ||
| 225-5025 B | [1] | RING (16.88-MM THK) | ||
| 225-5026 B | [1] | RING (16.9-MM THK) | ||
| 225-5027 B | [1] | RING (16.94-MM THK) | ||
| 225-5019 B | [1] | RING (16.74-MM THK) | ||
| 225-5020 B | [1] | RING (16.76-MM THK) | ||
| 225-5021 B | [1] | RING (16.76-MM THK) | ||
| 225-5022 B | [1] | RING (16.78-MM THK) | ||
| 225-5023 B | [1] | RING (16.82-MM THK) | ||
| 21. | 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | |
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | ||
| 22. | 5W-5547 B | [1] | DISC (1-MM THK) | |
| 5W-5548 B | [1] | DISC (1.1-MM THK) | ||
| 5W-5549 B | [1] | DISC (1.2-MM THK) | ||
| 5W-5550 B | [1] | DISC (1.3-MM THK) | ||
| 5W-5551 B | [1] | DISC (1.4-MM THK) | ||
| 5W-5552 B | [1] | DISC (1.5-MM THK) | ||
| 5W-5553 B | [1] | DISC (1.6-MM THK) | ||
| 5W-5554 B | [1] | DISC (1.7-MM THK) | ||
| 5W-5555 B | [1] | DISC (1.05-MM THK) | ||
| 5W-5556 B | [1] | DISC (1.15-MM THK) | ||
| 5W-5557 B | [1] | DISC (1.25-M THK) | ||
| 5W-5558 B | [1] | DISC (1.35-MM THK) | ||
| 5W-5559 B | [1] | DISC (1.45-MM THK) | ||
| 5W-5560 B | [1] | DISC (1.55-MM THK) | ||
| 5W-5561 B | [1] | DISC (1.65-MM THK) | ||
| 5W-5562 B | [1] | DISC (1.75-MM THK) | ||
| 5W-6400 B | [1] | DISC (1.8-MM THK) | ||
| 8U-2752 B | [1] | DISC (0.7-MM THK) | ||
| 8U-2753 B | [1] | DISC (0.8-MM THK) | ||
| 8U-2754 B | [1] | DISC (0.9-MM THK) | ||
| 23. | 110-2461 M | [8] | BOLT (M16X1.5X100-MM) | |
| 24. | 110-2457 | [4] | PIN-SPRING | |
| 25. | 110-2458 | [4] | PIN-SPRING | |
| 26. | 110-2467 | [1] | SHAFT-DIFFERENTIAL | |
| 27. | 213-9783 | [6] | BEARING-ROLLER | |
| 28. | 248-1017 | [4] | WASHER-THRUST | |
| 29. | 110-0855 | [2] | GEAR-AXLE BEVEL | |
| 30. | 110-0852 | [2] | DISC-PRESSURE | |
| 31. | 110-0854 | [8] | DISC-FRICTION | |
| 32. | 110-0853 | [10] | PLATE | |
| 33. | 253-9741 | [1] | CASE-DIFFERENTIAL | |
| 34. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 35. | 213-9759 | [4] | GEAR-BEVEL | |
| 36. | 193-1132 | [6] | GEAR-PLANETARY | |
| 37. | 190-8590 | [12] | RING-SNAP | |
| 38. | 110-0867 | [1] | HOUSING-AXLE DRIVE | |
| 39. | 110-0883 | [2] | HOUSING-BRAKE | |
| 40. | 190-8567 B | [1] | SHIM (1-MM THK) | |
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 110-0124 B | [1] | SHIM (2-MM THK) | ||
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 193-1125 B | [1] | SHIM (0.1-MM THK)(0.1MM THK) | ||
| 193-1127 B | [1] | SHIM (0.15-MM THK) | ||
| 193-1128 B | [1] | WASHER (0.1-MM THK) | ||
| 193-1129 B | [1] | WASHER (0.15-MM THK) | ||
| 193-1130 B | [1] | WASHER (0.5-MM THK) | ||
| 41. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 110-4746 | [1] | SEAL | |
| 43. | 110-0856 | [1] | CAP-PROTECTION | |
| 44. | 113-5988 | [1] | FLANGE | |
| 45. | 110-4791 | [1] | HOUSING-AXLE | |
| 46. | 110-4749 | [2] | PLUG | |
| 47. | 110-2463 | [1] | BEARING-ROLLER | |
| 48. | 110-0180 B | [2] | WASHER (90X99.8X0.3-MM THK) | |
| 6T-8671 B | [2] | SHIM (0.8-MM THK) | ||
| 6T-8672 B | [2] | SHIM (0.7-MM THK) | ||
| 6T-8673 B | [2] | SHIM (0.6-MM THK) | ||
| 6T-8674 B | [2] | SHIM (0.5-MM THK) | ||
| 6T-8675 B | [2] | SHIM (0.4-MM THK) | ||
| 110-0167 B | [2] | WASHER (90X99.8X0.85-MM THK) | ||
| 110-0168 B | [2] | WASHER (90X99.8X0.75-MM THK) | ||
| 110-0169 B | [2] | WASHER (90X99.8X0.65-MM THK) | ||
| 110-0170 B | [2] | WASHER (0.55-MM THK) | ||
| 110-0177 B | [2] | WASHER (90X99.8X0.45-MM THK) | ||
| 110-0178 B | [2] | WASHER (90X99.8X0.35-MM THK) | ||
| 110-0181 B | [2] | RING (2-MM THK) | ||
| 110-0182 B | [2] | RING (1.95-MM THK) | ||
| 110-0183 B | [2] | RING (1.9-MM THK) | ||
| 110-0184 B | [2] | RING (1.85-MM THK) | ||
| 098-2961 B | [2] | SHIM (1.7-MM THK) | ||
| 098-2962 B | [2] | SHIM (1.8-MM THK) | ||
| 098-2959 B | [2] | SHIM (1.5-MM THK) | ||
| 098-2960 B | [2] | SHIM (1.6-MM THK) | ||
| 098-2957 B | [2] | SHIM (1.3-MM THK) | ||
| 098-2958 B | [2] | SHIM (1.4-MM THK) | ||
| 6T-8668 B | [2] | SHIM (1.2-MM THK) | ||
| 6T-8669 B | [2] | SHIM (1.1-MM THK) | ||
| 6T-8670 B | [2] | SHIM (1-MM THK) | ||
| 110-0191 B | [2] | RING (1.25-MM THK) | ||
| 110-0192 B | [2] | RING (1.15-MM THK) | ||
| 110-0193 B | [2] | RING (1.05-MM THK) | ||
| 110-0194 B | [2] | RING (0.95-MM THK) | ||
| 110-0195 B | [2] | RING (0.9-MM THK) | ||
| 49. | 110-0875 | [2] | PISTON | |
| 50. | 110-4753 | [2] | BEARING | |
| 51. | 008-1902 | [2] | CONE-BEARING | |
| 52. | 110-4790 | [1] | HOUSING-AXLE | |
| 53. | 110-4792 | [1] | HOUSING-BRAKE (LH) | |
| 110-4793 | [1] | HOUSING-BRAKE (RH) | ||
| 54. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 55. | 110-0134 B | [1] | SHIM (0.4-MM THK) | |
| 110-0131 B | [1] | SHIM (1-MM THK) | ||
| 110-0132 B | [1] | SHIM (0.8-MM THK) | ||
| 110-0133 B | [1] | SHIM (0.6-MM THK) | ||
| B | [1] | SHIM (0.3-MM THK) | ||
| 110-0136 B | [1] | SHIM (0.2-MM THK) | ||
| 110-0126 B | [1] | SHIM (2-MM THK) | ||
| 110-0127 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0128 B | [1] | SHIM (1.6-MM THK) | ||
| 56. | 110-0859 | [2] | PIN-BEARING | |
| 57. | 096-9988 M | [8] | BOLT (M14X2X30-MM) | |
| 58. | 9R-6947 | [2] | SEAL-O-RING | |
| 59. | 9R-6952 | [2] | CAP-SEALING | |
| 60. | 110-0884 | [2] | HUB | |
| 61. | 110-0874 | [20] | BOLT-WHEEL | |
| 62. | 110-4745 | [2] | SEAL-O-RING | |
| 63. | 110-2464 | [4] | BEARING-ROLLER | |
| 64. | 110-0866 | [2] | CARRIER-PLANETARY | |
| 65. | 110-0862 | [2] | GEAR-RING | |
| 66. | 098-2996 | [4] | SEAL-O-RING | |
| 67. | 6S-3051 | [2] | CUP-BEARING | |
| 68. | 110-4737 | [6] | RING-RETAINING | |
| 69. | 4D-8648 | [2] | CUP-BEARING | |
| 70. | 110-0865 | [2] | SHAFT-SUN GEAR | |
| 71. | 009-3818 | [1] | CUP-BEARING | |
| 72. | 110-0846 | [2] | RING-RETAINING | |
| 73. | 2D-9190 | [1] | CUP-BEARING | |
| 74. | 110-0863 | [2] | WASHER-THRUST | |
| 75. | 110-0844 | [2] | WASHER-THRUST | |
| 76. | 110-0849 | [2] | NUT-SLOTTED | |
| 77. | 110-0861 | [2] | WASHER-TAB | |
| 78. | 9R-6965 M | [4] | SCREW (M10X1.5X20-MM) | |
| 79. | 110-0851 | [2] | SEAL | |
| 80. | 110-0850 | [4] | SEAL | |
| 81. | 110-0839 | [2] | BUSHING | |
| 82. | 110-0864 | [2] | RING-RETAINING | |
| 83. | 110-2460 M | [4] | BOLT (M12X1.5X95-MM) | |
| 84. | 8T-6385 M | [32] | BOLT (M16X2X180-MM) | |
| 85. | 110-2455 M | [4] | BOLT (M12X1.5X20-MM) | |
| 86. | 110-4733 | [2] | UNIVERSAL JOINT | |
| 87. | 8T-4779 M | [8] | BOLT (M16X2X35-MM) | |
| 88. | 110-0860 | [2] | PIN-BEARING | |
| 89. | 130-2703 | [1] | GEAR SET | |
| 90. | 110-0843 | [1] | WASHER (31X56X6-MM THK) | |
| 91. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 92. | 110-2456 | [4] | PIN-SPRING | |
| 93. | 110-0840 | [2] | TIE ROD | |
| 94. | 110-0871 | [1] | GUIDE | |
| 95. | 110-0847 | [1] | PLUG-SCREW | |
| 96. | 9R-6953 | [6] | SEAL-O-RING | |
| 97. | 109-4440 | [5] | PLUG | |
| 98. | 110-0841 | [1] | ROD-PISTON | |
| 99. | 110-4754 | [1] | GASKET | |
| 100. | 110-4759 | [2] | GUIDE-PISTON | |
| 101. | 110-0873 | [1] | CYLINDER | |
| 102. | 110-4742 | [2] | SEAL-O-RING | |
| 103. | 110-4739 | [12] | RING-SNAP | |
| 104. | 110-4735 | [4] | RING-GUIDE | |
| 105. | 5W-6392 | [2] | SEAL-O-RING | |
| 106. | 5W-6391 | [2] | SCRAPER | |
| 107. | 110-0872 | [1] | GUIDE | |
| 108. | 110-2459 M | [8] | BOLT (M14X2X105-MM) | |
| 109. | 6V-2652 | [2] | CONE-BEARING | |
| 110. | 110-0858 | [2] | CAP-SEALING | |
| 111. | 110-4743 | [2] | SEAL-O-RING | |
| 112. | 9R-3171 | [4] | FITTING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29970202
154-5472: AXLE GP-DRIVE & STEERING
154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N 1RR1100-1100; 2BR1000-UP
PART OF 174-5451, 175-6774 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
S/N 1RR1100-1100; 2BR1000-UP
PART OF 174-5451, 175-6774 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-5698 | [1] | HOUSING (RH) | |
| 2. | 119-7056 | [1] | HOUSING (LH) | |
| 3. | 9R-3175 | [1] | PLUG | |
| 5. | 130-7008 B | [2] | SHIM (0.2-MM THK) | |
| 130-7009 B | [2] | SHIM (0.3-MM THK) | ||
| 130-7010 B | [2] | SHIM (0.4-MM THK) | ||
| 130-7011 B | [2] | SHIM (0.6-MM THK) | ||
| 130-7012 B | [2] | SHIM (0.8-MM THK) | ||
| 130-7013 B | [2] | SHIM (1-MM THK) | ||
| 130-7015 B | [2] | SHIM (1.6-MM THK) | ||
| 130-7017 B | [2] | SHIM (2-MM THK) | ||
| 6. | 9X-0796 | [3] | SEAL-O-RING | |
| 7. | 130-2998 | [2] | BUSHING | |
| 8. | 130-6877 | [2] | SEAL | |
| 9. | 154-5404 | [2] | BEARING | |
| 10. | 9R-3168 M | [4] | SCREW (M10X1.5X20-MM) | |
| 11. | 119-7061 | [2] | PLUG | |
| 12. | 130-6878 | [6] | RING | |
| 13. | 169-4161 | [6] | CONE-BEARING | |
| 14. | 169-4162 | [6] | CONE-BEARING | |
| 15. | 169-4160 | [6] | GEAR | |
| 16. | 130-7027 | [2] | CARRIER | |
| 17. | 119-7042 | [2] | SHAFT | |
| 18. | 119-7040 | [2] | GEAR-RING | |
| 19. | 130-3007 | [2] | NUT | |
| 20. | 119-7060 M | [2] | SCREW-STOP (M14X1.5X50-MM) | |
| 21. | 130-7047 | [16] | STUD | |
| 22. | 130-3008 M | [16] | BOLT (M10X1.5X45-MM) | |
| 23. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 24. | 178-8608 | [4] | CONE-TAPERED | |
| 25. | 130-6879 | [2] | SEAL | |
| 26. | 9X-0640 | [2] | SEAL-O-RING | |
| 27. | 130-3014 Y | [1] | SHAFT GP-DRIVE (LH) | |
| 28. | 130-3013 Y | [1] | SHAFT GP-DRIVE (RH) | |
| 29. | 054-6589 | [2] | CLIP | |
| 30. | 119-7045 | [2] | SEAL | |
| 31. | 7X-5771 | [2] | RING-RETAINING | |
| 32. | 131-3816 | [2] | RING | |
| 33. | 119-7053 | [2] | FLANGE | |
| 34. | 5P-9439 | [2] | BALL BEARING | |
| 35. | 130-6677 | [16] | BOLT (M12X1.75X30-MM) | |
| 36. | 130-7026 | [2] | PIN | |
| 37. | 119-7038 | [2] | PIN | |
| 38. | 119-7047 | [2] | SEAL | |
| 39. | 119-7046 | [2] | SEAL | |
| 40. | 031-0426 | [2] | CUP-BEARING | |
| 41. | 077-3918 | [2] | BEARING | |
| 42. | 119-7057 | [1] | HOUSING (RH) | |
| 43. | 130-7031 | [1] | HOUSING (LH) | |
| 44. | 054-6459 B | [1] | SHIM (1-MM THK) | |
| 054-6460 B | [1] | SHIM (1.05-MM THK) | ||
| 054-6461 B | [1] | SHIM (1.1-MM THK) | ||
| 054-6462 B | [1] | SHIM (1.15-MM THK) | ||
| 054-6463 B | [1] | SHIM (1.2-MM THK) | ||
| 054-6464 B | [1] | SHIM (1.25-MM THK) | ||
| 054-6465 B | [1] | SHIM (1.3-MM THK) | ||
| 054-6466 B | [1] | SHIM (1.35-MM THK) | ||
| 054-6467 B | [1] | SHIM (1.4-MM THK) | ||
| 054-6468 B | [1] | SHIM (1.45-MM THK) | ||
| 054-6469 B | [1] | SHIM (1.5-MM THK) | ||
| 054-6470 B | [1] | SHIM (1.55-MM THK) | ||
| 054-6471 B | [1] | SHIM (1.6-MM THK) | ||
| 054-6472 B | [1] | SHIM (0.95-MM THK) | ||
| 054-6473 B | [1] | SHIM (0.9-MM THK) | ||
| 054-6474 B | [1] | SHIM (0.65-MM THK) | ||
| 054-6475 B | [1] | SHIM (0.7-MM THK) | ||
| 054-6476 B | [1] | SHIM (0.75-MM THK) | ||
| 054-6477 B | [1] | SHIM (0.85-MM THK) | ||
| 130-3850 B | [1] | SHIM (0.8-MM THK) | ||
| 45. | 130-6689 B | [1] | RING (15.1-MM THK) | |
| 130-6690 B | [1] | RING (15.2-MM THK) | ||
| 130-6691 B | [1] | RING (15.26-MM THK) | ||
| 130-6693 B | [1] | RING (15.3-MM THK) | ||
| 130-6694 B | [1] | RING (15.33-MM THK) | ||
| 130-6695 B | [1] | RING (15.36-MM THK) | ||
| 130-6696 B | [1] | RING (15.38-MM THK) | ||
| 130-6697 B | [1] | RING (15.4-MM THK) | ||
| 130-6698 B | [1] | RING (15.43-MM THK) | ||
| 130-6699 B | [1] | RING (15.46-MM THK) | ||
| 130-6701 B | [1] | RING (15.48-MM THK) | ||
| 130-6702 B | [1] | RING (15.5-MM THK) | ||
| 130-6703 B | [1] | RING (15.53-MM THK) | ||
| 130-6704 B | [1] | RING (15.56-MM THK) | ||
| 130-6705 B | [1] | RING (15.58-MM THK) | ||
| 130-6706 B | [1] | RING (15.6-MM THK) | ||
| 130-6707 B | [1] | RING (15.63-MM THK) | ||
| 130-6708 B | [1] | RING (15.66-MM THK) | ||
| 130-6709 B | [1] | RING (15.68-MM THK) | ||
| 130-6710 B | [1] | RING (15.7-MM THK) | ||
| 130-6711 B | [1] | RING (15.73-MM THK) | ||
| 46. | 130-6712 B | [1] | RING (15.8-MM THK) | |
| 130-6713 B | [1] | RING (15.83-MM THK) | ||
| 130-6714 B | [1] | RING (15.86-MM THK) | ||
| 130-6715 B | [1] | RING (15.9-MM THK) | ||
| 130-6716 B | [1] | RING (15.93-MM THK) | ||
| 130-6718 B | [1] | RING (15.96-MM THK) | ||
| 130-6719 B | [1] | RING (16-MM THK) | ||
| 130-6720 B | [1] | RING (16.03-MM THK) | ||
| 130-6721 B | [1] | RING (16.06-MM THK) | ||
| 130-6722 B | [1] | RING (16.1-MM THK) | ||
| 130-6724 B | [1] | RING (16.13-MM THK) | ||
| 130-6725 B | [1] | RING (16.16-MM THK) | ||
| 130-6726 B | [1] | RING (16.2-MM THK) | ||
| 130-6727 B | [1] | RING (16.23-MM) | ||
| 130-6728 B | [1] | RING (16.26-MM THK) | ||
| 130-6729 B | [1] | RING (16.3-MM THK) | ||
| 130-6731 B | [1] | RING (16.4-MM THK) | ||
| 130-6732 B | [1] | RING (16.76-MM THK) | ||
| 47. | 130-6798 B | [2] | SHIM (1-MM THK) | |
| 130-6799 B | [2] | WASHER (1.05-MM THK) | ||
| 130-6800 B | [2] | SHIM (1.1-MM THK) | ||
| 130-6801 B | [2] | WASHER (62.2X75X1.15-MM THK) | ||
| 130-6802 B | [2] | WASHER (62.2X75X1.2-MM THK) | ||
| 130-6803 B | [2] | WASHER (62.2X75X1.25-MM THK) | ||
| 130-6804 B | [2] | SHIM (1.3-MM THK) | ||
| 130-6805 B | [2] | SHIM (1.35-MM THK) | ||
| 130-6806 B | [2] | SHIM (1.4-MM THK) | ||
| 130-6807 B | [2] | WASHER (1.45-MM THK) | ||
| 130-6808 B | [2] | SHIM (1.5-MM THK) | ||
| 130-6809 B | [2] | SHIM (1.55-MM THK) | ||
| 130-6810 B | [2] | SHIM (1.6-MM THK) | ||
| 130-6811 B | [2] | SHIM (1.65-MM THK) | ||
| 130-6812 B | [2] | SHIM (1.7-MM THK) | ||
| 130-6813 B | [2] | SHIM (1.75-MM THK) | ||
| 130-6814 B | [2] | SHIM (1.8-MM THK) | ||
| 130-6815 B | [2] | SHIM (1.85-MM THK) | ||
| 130-6816 B | [2] | SHIM (1.9-MM THK) | ||
| 130-6817 B | [2] | WASHER (62.2X75X1.95-MM THK) | ||
| 130-6818 B | [2] | WASHER (62.2X75X2-MM THK) | ||
| 130-6819 B | [2] | WASHER (62.2X75X2.05-MM THK) | ||
| 130-6820 B | [2] | SHIM (2.1-MM THK) | ||
| 48. | 130-6673 | [1] | PLUG | |
| 49. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 50. | 6V-3303 M | [15] | BOLT (M16X2X60-MM) | |
| 51. | 178-7190 Y | [1] | CYLINDER GP-STEERING | |
| 52. | 6V-2200 | [2] | CUP-BEARING | |
| 53. | 003-7501 | [2] | CONE-BEARING | |
| 54. | 130-6675 | [1] | PIN | |
| 55. | 082-3077 | [4] | PIN | |
| 56. | 130-3010 | [4] | PIN (13.5MM DIA) | |
| 57. | 105-3484 M | [12] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 58. | 119-7036 | [1] | PIN | |
| 59. | 9R-6994 | [2] | WASHER-THRUST | |
| 60. | 128-7855 | [2] | GEAR-PINION | |
| 61. | 107-5608 | [1] | GEAR SET-BEVEL | |
| 62. | 130-3000 M | [2] | WASHER (53.2X71.9X1.9-MM THK) | |
| 63. | 130-7048 B | [2] | RING (13.5-MM THK) | |
| 130-7049 B | [2] | RING (13.6-MM THK) | ||
| 130-7050 B | [2] | RING (13.7-MM THK) | ||
| 64. | 130-7024 | [1] | CASE | |
| 65. | 130-3005 M | [1] | NUT (M24X2-THD) | |
| 66. | 054-6480 | [1] | DISC | |
| 67. | 130-7028 | [1] | PLATE | |
| 68. | 130-7046 | [1] | FLANGE | |
| 69. | 055-1986 | [1] | SEAL-LIP TYPE | |
| 70. | 6S-3051 | [3] | CUP-BEARING | |
| 71. | 008-1902 | [3] | CONE-BEARING | |
| 72. | 119-7035 | [2] | GEAR | |
| 73. | 130-3809 | [1] | TIE ROD AS (RH) | |
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-6880 | [1] | BALL JOINT | ||
| 130-7043 | [1] | JOINT | ||
| 74. | 130-3012 | [1] | TIE ROD AS (LH) | |
| 130-5010 M | [1] | LOCKNUT (M22X1.5-THD) | ||
| 130-6674 | [1] | CLAMP | ||
| 130-6881 | [1] | BALL JOINT | ||
| 130-7043 | [1] | JOINT | ||
| 75. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 76. | 154-5405 | [2] | SEAL-LIP TYPE | |
| 77. | 054-6847 | [1] | SEAL-O-RING | |
| 78. | 054-6526 | [15] | DISC | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29970203
154-5472: AXLE GP-DRIVE & STEERING
154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N 2BR1000-UP
PART OF 174-5451 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
S/N 2BR1000-UP
PART OF 174-5451 AXLE GP-DRIVE & STEERING
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-3999 | [2] | CAP-PLUG | |
| 2. | 119-7035 | [2] | GEAR | |
| 3. | 229-2949 | [1] | TIE ROD AS (LH) | |
| 3A. | 6C-9221 M | [1] | NUT (M24X1.5-THD) | |
| 3B. | 236-4481 | [1] | JOINT | |
| 3C. | 236-4479 | [1] | BALL JOINT (LH) | |
| 237-7962 M | [1] | NUT (M22X1.5-THD) | ||
| 4. | 229-2950 | [1] | TIE ROD AS (RH) | |
| 4A. | 6C-9221 M | [1] | NUT (M24X1.5-THD) | |
| 4B. | 236-4481 | [1] | JOINT | |
| 4C. | 236-4480 | [1] | BALL JOINT (RH) | |
| 237-7962 M | [1] | NUT (M22X1.5-THD) | ||
| 5. | 178-7190 Y | [1] | CYLINDER GP-STEERING | |
| 6. | 130-7017 B | [2] | SHIM (2-MM THK) | |
| 130-7015 B | [2] | SHIM (1.6-MM THK) | ||
| 130-7013 B | [2] | SHIM (1-MM THK) | ||
| 130-7012 B | [2] | SHIM (0.8-MM THK) | ||
| 130-7011 B | [2] | SHIM (0.6-MM THK) | ||
| 130-7010 B | [2] | SHIM (0.4-MM THK) | ||
| 130-7009 B | [2] | SHIM (0.3-MM THK) | ||
| 130-7008 B | [2] | SHIM (0.2-MM THK) | ||
| 7. | 107-5608 | [1] | GEAR SET-BEVEL | |
| 8. | 3N-4969 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 9. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 10. | 130-6689 BC | [1] | RING (15.1-MM THK) | |
| 130-6690 B | [1] | RING (15.2-MM THK) | ||
| 130-6691 B | [1] | RING (15.26-MM THK) | ||
| 130-6693 B | [1] | RING (15.3-MM THK) | ||
| 130-6694 B | [1] | RING (15.33-MM THK) | ||
| 130-6695 B | [1] | RING (15.36-MM THK) | ||
| 130-6696 B | [1] | RING (15.38-MM THK) | ||
| 130-6697 B | [1] | RING (15.4-MM THK) | ||
| 130-6698 B | [1] | RING (15.43-MM THK) | ||
| 130-6699 B | [1] | RING (15.46-MM THK) | ||
| 130-6701 B | [1] | RING (15.48-MM THK) | ||
| 130-6702 B | [1] | RING (15.5-MM THK) | ||
| 130-6703 B | [1] | RING (15.53-MM THK) | ||
| 130-6704 B | [1] | RING (15.56-MM THK) | ||
| 130-6705 B | [1] | RING (15.58-MM THK) | ||
| 130-6706 B | [1] | RING (15.6-MM THK) | ||
| 130-6707 B | [1] | RING (15.63-MM THK) | ||
| 130-6708 B | [1] | RING (15.66-MM THK) | ||
| 130-6709 B | [1] | RING (15.68-MM THK) | ||
| 130-6710 B | [1] | RING (15.7-MM THK) | ||
| 130-6711 B | [1] | RING (15.73-MM THK) | ||
| 130-6712 B | [1] | RING (15.8-MM THK) | ||
| 130-6713 B | [1] | RING (15.83-MM THK) | ||
| 130-6714 B | [1] | RING (15.86-MM THK) | ||
| 130-6715 B | [1] | RING (15.9-MM THK) | ||
| 130-6716 B | [1] | RING (15.93-MM THK) | ||
| 130-6718 B | [1] | RING (15.96-MM THK) | ||
| 130-6719 B | [1] | RING (16-MM THK) | ||
| 130-6720 B | [1] | RING (16.03-MM THK) | ||
| 130-6721 B | [1] | RING (16.06-MM THK) | ||
| 130-6722 B | [1] | RING (16.1-MM THK) | ||
| 130-6724 B | [1] | RING (16.13-MM THK) | ||
| 130-6725 B | [1] | RING (16.16-MM THK) | ||
| 130-6726 B | [1] | RING (16.2-MM THK) | ||
| 130-6727 B | [1] | RING (16.23-MM) | ||
| 130-6728 B | [1] | RING (16.26-MM THK) | ||
| 130-6729 B | [1] | RING (16.3-MM THK) | ||
| 130-6731 B | [1] | RING (16.4-MM THK) | ||
| 130-6732 B | [1] | RING (16.76-MM THK) | ||
| 11. | 154-5405 | [2] | SEAL-LIP TYPE | |
| 12. | 243-5336 M | [4] | BOLT (M10X1.5X20-MM) | |
| 13. | 119-7061 | [2] | PLUG | |
| 14. | 130-6878 | [6] | RING | |
| 15. | 264-2769 | [6] | BEARING | |
| 16. | 264-2768 | [6] | BEARING | |
| 17. | 264-2767 | [6] | GEAR | |
| 18. | 264-2766 | [2] | CARRIER-PLANETARY | |
| 19. | 119-7042 | [2] | SHAFT | |
| 20. | 119-7040 | [2] | GEAR-RING | |
| 21. | 130-3007 | [2] | NUT | |
| 22. | 119-7060 M | [2] | SCREW-STOP (M14X1.5X50-MM) | |
| 23. | 130-7047 | [16] | STUD | |
| 24. | 311-8193 M | [16] | BOLT (M10X1.5X45-MM) | |
| 25. | 2S-0480 | [4] | CUP-TAPERED ROLLER | |
| 26. | 178-8608 | [4] | CONE-TAPERED | |
| 27. | 130-6879 | [2] | SEAL | |
| 28. | 9X-0640 | [2] | SEAL-O-RING | |
| 29. | 130-3014 Y | [1] | SHAFT GP-DRIVE (LH) | |
| 30. | 130-3013 Y | [1] | SHAFT GP-DRIVE (RH) | |
| 31. | 054-6589 | [2] | CLIP | |
| 32. | 119-7045 | [2] | SEAL | |
| 33. | 7X-5771 | [2] | RING-RETAINING | |
| 34. | 131-3816 | [2] | RING | |
| 35. | 119-7053 | [2] | FLANGE | |
| 36. | 5P-9439 | [2] | BALL BEARING | |
| 37. | 8T-4139 M | [16] | BOLT (M12X1.75X30-MM) | |
| 38. | 130-7026 | [2] | PIN | |
| 39. | 119-7038 | [2] | PIN | |
| 40. | 128-7855 | [2] | GEAR-PINION | |
| 41. | 9R-6994 | [2] | WASHER-THRUST | |
| 42. | 119-7036 | [1] | PIN | |
| 43. | 130-6798 B | [2] | SHIM (1-MM THK) | |
| 130-6799 B | [2] | WASHER (1.05-MM THK) | ||
| 130-6800 B | [2] | SHIM (1.1-MM THK) | ||
| 130-6801 B | [2] | WASHER (62.2X75X1.15-MM THK) | ||
| 130-6802 B | [2] | WASHER (62.2X75X1.2-MM THK) | ||
| 130-6803 B | [2] | WASHER (62.2X75X1.25-MM THK) | ||
| 130-6804 B | [2] | SHIM (1.3-MM THK) | ||
| 130-6805 B | [2] | SHIM (1.35-MM THK) | ||
| 130-6806 B | [2] | SHIM (1.4-MM THK) | ||
| 130-6807 B | [2] | WASHER (1.45-MM THK) | ||
| 130-6808 B | [2] | SHIM (1.5-MM THK) | ||
| 130-6809 B | [2] | SHIM (1.55-MM THK) | ||
| 130-6810 B | [2] | SHIM (1.6-MM THK) | ||
| 130-6811 B | [2] | SHIM (1.65-MM THK) | ||
| 130-6812 B | [2] | SHIM (1.7-MM THK) | ||
| 130-6813 B | [2] | SHIM (1.75-MM THK) | ||
| 130-6814 B | [2] | SHIM (1.8-MM THK) | ||
| 130-6815 B | [2] | SHIM (1.85-MM THK) | ||
| 130-6816 B | [2] | SHIM (1.9-MM THK) | ||
| 130-6817 B | [2] | WASHER (62.2X75X1.95-MM THK) | ||
| 130-6818 B | [2] | WASHER (62.2X75X2-MM THK) | ||
| 130-6819 B | [2] | WASHER (62.2X75X2.05-MM THK) | ||
| 130-6820 B | [2] | SHIM (2.1-MM THK) | ||
| 44. | 105-3484 M | [12] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 45. | 130-3010 | [4] | PIN | |
| 46. | 082-3077 | [4] | PIN | |
| 47. | 130-6675 | [1] | PIN | |
| 48. | 119-7047 | [2] | SEAL | |
| 49. | 054-6459 B | [1] | SHIM (1-MM THK) | |
| 054-6460 B | [1] | SHIM (1.05-MM THK) | ||
| 054-6461 B | [1] | SHIM (1.1-MM THK) | ||
| 054-6462 B | [1] | SHIM (1.15-MM THK) | ||
| 054-6463 B | [1] | SHIM (1.2-MM THK) | ||
| 054-6464 B | [1] | SHIM (1.25-MM THK) | ||
| 054-6465 B | [1] | SHIM (1.3-MM THK) | ||
| 054-6466 B | [1] | SHIM (1.35-MM THK) | ||
| 054-6467 B | [1] | SHIM (1.4-MM THK) | ||
| 054-6468 B | [1] | SHIM (1.45-MM THK) | ||
| 054-6469 B | [1] | SHIM (1.5-MM THK) | ||
| 054-6470 B | [1] | SHIM (1.55-MM THK) | ||
| 054-6471 B | [1] | SHIM (1.6-MM THK) | ||
| 054-6472 B | [1] | SHIM (0.95-MM THK) | ||
| 054-6473 B | [1] | SHIM (0.9-MM THK) | ||
| 054-6474 B | [1] | SHIM (0.65-MM THK) | ||
| 054-6475 B | [1] | SHIM (0.7-MM THK) | ||
| 054-6476 B | [1] | SHIM (0.75-MM THK) | ||
| 054-6477 B | [1] | SHIM (0.85-MM THK) | ||
| 50. | 119-7046 | [2] | SEAL | |
| 51. | 031-0426 | [2] | CUP-BEARING | |
| 52. | 077-3918 | [2] | BEARING | |
| 53. | 119-7057 | [1] | HOUSING (RH) | |
| 54. | 130-7031 | [1] | HOUSING (LH) | |
| 55. | 154-5404 | [2] | BEARING | |
| 56. | 130-6877 | [2] | SEAL | |
| 57. | 130-2998 | [2] | BUSHING | |
| 58. | 9X-0796 | [1] | SEAL-O-RING | |
| 59. | 130-6673 | [1] | PLUG | |
| 60. | 9R-3175 | [1] | PLUG | |
| 61. | 054-6526 | [15] | DISC | |
| 62. | 6V-3303 M | [15] | BOLT (M16X2X60-MM) | |
| 63. | 054-6847 | [1] | SEAL-O-RING | |
| 64. | 6V-2200 | [2] | CUP-BEARING | |
| 65. | 003-7501 | [2] | CONE-BEARING | |
| 66. | 174-5698 | [1] | HOUSING (RH) | |
| 67. | 119-7056 | [1] | HOUSING (LH) | |
| 68. | 008-1902 | [3] | CONE-BEARING | |
| 69. | 6S-3051 | [3] | CUP-BEARING | |
| 70. | 055-1986 | [1] | SEAL-LIP TYPE | |
| 71. | 130-7046 | [1] | FLANGE | |
| 72. | 130-7028 | [1] | PLATE | |
| 73. | 054-6480 | [1] | DISC | |
| 74. | 130-3005 M | [1] | NUT (M24X2-THD) | |
| 75. | 130-7024 | [1] | CASE | |
| 76. | 130-7048 B | [2] | RING (13.5-MM THK) | |
| 130-7049 B | [2] | RING (13.6-MM THK) | ||
| 130-7050 B | [2] | RING (13.7-MM THK) | ||
| 79. | 130-3000 M | [2] | WASHER (53.2X71.9X1.9-MM THK) | |
| 80. | 493-8891 B | [2] | RING (11-MM THK) | |
| 493-8892 B | [2] | RING (11.1-MM THK) | ||
| 493-8893 B | [2] | RING (11.2-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29970204
174-5451: AXLE GP-DRIVE & STEERING
174-5451 AXLE GP-DRIVE & STEERING
S/N 2BR1000-UP
PART OF 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 2BR1000-UP
PART OF 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-7082 | [1] | WASHER (2.266X4X0.031-IN THK) | |
| 2. | 9R-9702 | [2] | WASHER (56X100X1.6-MM THK) | |
| 3. | 112-9629 | [1] | PIN | |
| 4. | 154-5472 Y | [1] | AXLE GP-DRIVE & STEERING (FRONT) | |
| 5. | 165-8996 | [2] | WASHER-THRUST (55.5X100.5X5-MM THK) | |
| 6. | 8T-5041 M | [1] | BOLT (M12X1.75X120-MM) | |
| 7. | 8T-8549 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 8. | 173-5479 | [1] | SWITCH AS-ROCKER (ALL WHEEL DRIVE, BRAKE) | |
| 111-7899 | [1] | GASKET | ||
| 9. | 113-8491 | [1] | FUSE (15-AMPERE) | |
| 10. | 3E-9362 | [1] | RELAY AS (12-VOLT) | |
| 11. | 106-8704 | [2] | SUPPRESSOR AS-ARC | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29970205
175-6774: AXLE GP-DRIVE & STEERING
175-6774 AXLE GP-DRIVE & STEERING
S/N 1RR1100-1100
PART OF 174-5439, 174-5440 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 1RR1100-1100
PART OF 174-5439, 174-5440 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-7082 | [1] | WASHER (2.266X4X0.031-IN THK) | |
| 2. | 9R-9702 | [2] | WASHER (56X100X1.6-MM THK) | |
| 3. | 112-9629 | [1] | PIN | |
| 4. | 154-5472 Y | [1] | AXLE GP-DRIVE & STEERING | |
| 5. | 165-8996 | [2] | WASHER-THRUST (55.5X100.5X5-MM THK) | |
| 6. | 8T-5041 M | [1] | BOLT (M12X1.75X120-MM) | |
| 7. | 8T-8549 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 8. | 173-5479 | [1] | SWITCH AS-ROCKER (ALL WHEEL DRIVE, BRAKE) | |
| 111-7899 | [1] | GASKET | ||
| 9. | 113-8491 | [1] | FUSE (15-AMPERE) | |
| 10. | 174-5452 | [1] | WIRE AS | |
| 11. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29970206
156-2857: AXLE GP-REAR
156-2857 AXLE GP-REAR
S/N 2BR1000-UP
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
S/N 2BR1000-UP
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5837 | [2] | SHAFT AS | |
| (EACH INCLUDES) | ||||
| 1A. | 9R-5219 | [8] | BOLT-SPECIAL | |
| 2. | 9R-2407 | [1] | RETAINER AS | |
| 2A. | 3N-6408 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 2B. | 4K-5843 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3. | 156-1928 | [1] | HOUSING AS (LH) | |
| 3A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 3B. | 8S-9151 | [1] | CUP-BEARING | |
| 3C. | [2] | STUD | ||
| 3D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 4. | [1] | HOUSING AS | ||
| 4A. | 6Y-7652 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4B. | 8S-9151 | [1] | CUP-BEARING | |
| 4C. | [2] | STUD | ||
| 4D. | 156-1930 | [1] | GEAR-RING (56-TEETH) | |
| 5. | 186-4117 | [2] | CARRIER AS | |
| (EACH INCLUDES) | ||||
| 5A. | 7T-6652 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 5B. | 9R-2417 | [3] | WASHER (33.07X48.38X1.06-MM THK) | |
| 5C. | 9R-2418 | [6] | WASHER (32.94X57.21X0.78-MM THK) | |
| 5D. | 9R-2419 | [3] | KIT-BEARING | |
| 5E. | 9R-2420 | [1] | RETAINER | |
| 5F. | 9R-2421 | [3] | SHAFT | |
| 5G. | 186-4118 | [3] | GEAR-PLANETARY (20-TEETH) | |
| 6. | 9F-2167 | [2] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 7. | 9R-0883 | [1] | PIN | |
| 8. | 9R-0823 | [1] | LEVER AS | |
| 9. | 9R-2427 B | [1] | SHIM (0.965-MM THK) | |
| 9R-2428 B | [1] | SHIM (1.118-MM THK) | ||
| 9R-2429 B | [1] | SHIM (1.27-MM THK) | ||
| 9R-2430 B | [1] | SHIM (1.422-MM THK) | ||
| 9R-2431 B | [1] | SHIM (1.575-MM THK) | ||
| 9R-2432 B | [1] | SHIM (1.727-MM THK) | ||
| 9R-2433 B | [1] | SHIM (1.88-MM THK) | ||
| 9R-2434 B | [1] | SHIM (2.032-MM THK) | ||
| 10. | 9R-2425 | [2] | WASHER (23.088X69.6X9.52-MM THK) | |
| 11. | 156-2572 | [1] | HOUSING-REAR BRAKE (RH) | |
| 12. | 9R-9410 | [2] | SEAL-REAR BRAKE | |
| 13. | 9R-9409 | [2] | SEAL-REAR BRAKE | |
| 14. | 9R-9408 | [2] | PISTON-REAR BRAKE | |
| 15. | 9R-2446 B | [1] | SPACER (45.86X50.98X31.858-MM THK) | |
| 9R-2447 B | [1] | SPACER (45.86X50.98X31.908-MM THK) | ||
| 9R-2448 B | [1] | SPACER (45.86X50.98X31.959-MM THK) | ||
| 9R-2449 B | [1] | SPACER (45.86X50.98X32.01-MM THK) | ||
| 9R-2450 B | [1] | SPACER (45.86X50.98X32.061-MM THK) | ||
| 9R-2451 B | [1] | SPACER (45.86X50.98X32.112-MM THK) | ||
| 9R-2452 B | [1] | SPACER (45.86X50.98X32.162-MM THK) | ||
| 9R-2453 B | [1] | SPACER (45.86X50.98X32.213-MM THK) | ||
| 9R-2454 B | [1] | SPACER (45.86X50.98X32.264-MM THK) | ||
| 9R-2455 B | [1] | SPACER (45.86X50.98X32.315-MM THK) | ||
| 9R-2456 B | [1] | SPACER (45.86X50.98X32.366-MM THK) | ||
| 9R-2457 B | [1] | SPACER (45.86X50.98X32.416-MM THK) | ||
| 9R-2458 B | [1] | SPACER (45.86X50.98X32.467-MM THK) | ||
| 9R-2459 B | [1] | SPACER (45.86X50.98X32.518-MM THK) | ||
| 9R-2460 B | [1] | SPACER (45.86X50.98X32.569-MM THK) | ||
| 16. | 230-4017 | [8] | DISC-BRAKE | |
| 17. | 9R-2474 | [2] | PIN | |
| 18. | 9R-9401 | [8] | PLATE | |
| 19. | 8S-4740 | [12] | BOLT (9/16-12X5-IN) | |
| 20. | 9R-9398 | [2] | MANIFOLD-BRAKE TUBE | |
| 21. | 8H-1607 | [2] | SEAL-O-RING | |
| 22. | 9R-2424 | [2] | GEAR (16-TEETH) | |
| 23. | 8M-8157 | [4] | SEAL-O-RING | |
| 24. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 25. | 5L-9656 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 26. | 9X-8880 | [25] | BOLT (5/8-11X2-IN) | |
| 27. | 9R-2508 | [1] | HOUSING | |
| 28. | 113-1147 | [1] | FLANGE | |
| 29. | 9R-2497 | [1] | SEAL | |
| 30. | 9R-2501 | [1] | WASHER (32.5X60.5X5.6-MM THK) | |
| 31. | 9R-2502 | [1] | NUT (1-1/4-18-THD) | |
| 32. | 3B-5302 | [1] | PIN-COTTER | |
| 33. | 9R-2498 | [1] | RETAINER | |
| 34. | 3B-4509 | [6] | LOCKWASHER | |
| 35. | 3K-3379 | [6] | BOLT (9/16-12X1-IN) | |
| 36. | 9X-8883 | [1] | BOLT (5/8-11X2.75-IN) | |
| 37. | 5L-9018 | [4] | BOLT-SOCKET HEAD (1/4-20X1.75-IN) | |
| 38. | 8T-6760 | [2] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
| 39. | 9R-2499 | [1] | SEAL AS | |
| 40. | 9R-2496 | [1] | SEAL | |
| 41. | 7T-6653 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 42. | 118-5839 | [2] | SEAL-REAR AXLE | |
| 43. | 9R-2512 | [1] | SEAL | |
| 44. | 030-1957 | [2] | CONE-BEARING (TAPERED ROLLER) | |
| 45. | 7T-6654 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 46. | 9R-2505 | [1] | SEAL | |
| 47. | 9R-2504 | [1] | SHAFT | |
| 48. | 9R-2507 M | [1] | SCREW-SPECIAL | |
| 49. | 7T-7621 | [1] | BEARING AS | |
| 50. | 9R-2494 | [1] | RING | |
| 51. | 9R-2480 | [1] | CASE AS | |
| 52. | 2S-0480 | [1] | CUP-TAPERED ROLLER | |
| 53. | 2S-0479 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 54. | 9R-2506 | [1] | FORK | |
| 55. | 9R-2492 | [1] | WASHER (64.389X78.74X3.124-MM THK) | |
| 56. | 9R-2493 | [1] | RING | |
| 57. | 9R-2488 | [1] | GEAR (16-TEETH) | |
| 58. | 9R-2482 | [1] | COUPLING | |
| 59. | 282-9821 | [1] | HOUSING-BRAKE (LH) | |
| 60. | 9R-2486 | [1] | SPRING | |
| 61. | 9R-2483 | [1] | ADAPTER | |
| 62. | 9R-2484 | [2] | BUSHING-TERMINAL | |
| 63. | 9R-2490 | [2] | WASHER (76.2X101.6X1.524-MM THK) | |
| 64. | 9R-2491 | [1] | SPIDER | |
| 65. | 9R-9403 | [4] | PINION | |
| 66. | 9R-2489 | [4] | WASHER-SPRING | |
| 67. | 9R-2485 | [8] | BOLT (1/2-13X2.87-IN) | |
| 68. | 9R-2495 | [2] | SEAL | |
| 69. | 118-9117 | [1] | GEAR SET | |
| 70. | 9R-6671 M | [12] | BOLT (1/2-20X1.62-IN) | |
| 71. | 2M-2570 | [12] | LOCKNUT (1/2-20-THD) | |
| 72. | 9R-2503 | [1] | BLOCK | |
| 73. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 74. | 0T-0318 | [2] | BOLT (7/16-14X1-IN) | |
| 75. | 9R-2487 | [1] | GEAR (16-TEETH) | |
| 76. | 9R-2435 B | [2] | SPACER (22.86X53.85X1.25-MM THK) | |
| 9R-2436 B | [2] | SPACER (22.86X53.85X1.35-MM THK) | ||
| 9R-2437 B | [2] | SPACER (22.86X53.85X1.45-MM THK) | ||
| 9R-2438 B | [2] | SPACER (22.86X53.85X1.55-MM THK) | ||
| 9R-2439 B | [2] | SPACER (22.86X53.85X1.65-MM THK) | ||
| 9R-2440 B | [2] | SPACER (22.86X53.85X1.75-MM THK) | ||
| 9R-2441 B | [2] | SPACER (22.86X53.85X1.85-MM THK) | ||
| 9R-2442 B | [2] | SPACER (22.86X53.85X1.96-MM THK) | ||
| 9R-2443 B | [2] | SPACER (22.86X53.85X2.06-MM THK) | ||
| 9R-2444 B | [2] | SPACER (22.86X53.85X2.16-MM THK) | ||
| 9R-2445 B | [2] | SPACER (22.86X53.85X2.26-MM THK) | ||
| 77. | 9R-6602 | [2] | PLUG-MAGNETIC | |
| 78. | 5P-0540 | [4] | NUT-HEX FULL (9/16-18-THD) | |
| 79. | 282-9822 | [1] | HOUSING-BRAKE (RH) | |
| 80. | 156-1933 | [1] | HOUSING-REAR BRAKE (LH) | |
| 81. | 9R-2426 | [2] | LOCK | |
| 82. | 9R-2466 M | [2] | BOLT (7/8-14X2.2-IN) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29970207
150-1281: CHART-WHEEL & TIRE
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (FOR USAGE REFER TO CHART) | ||||
| 1. | 9R-0315 | [1] | WHEEL AS (FRONT) | |
| 2. | 9R-1572 | [1] | WHEEL AS | |
| 3. | 9R-2937 | [1] | WHEEL AS | |
| 4. | 135-0770 | [1] | WHEEL AS (FRONT) | |
| 5. | 135-0786 | [1] | WHEEL AS (FRONT) | |
| 6. | 141-7221 | NUT-HEX FLANGE (3/4-16-THD) | ||
| 7. | 6D-0337 | [1] | VALVE GP-TIRE (BASIC) | |
| 6D-0443 | [1] | HOUSING AS-CORE | ||
| 2D-2628 | [1] | CORE-VALVE | ||
| 2D-2633 | [1] | CAP | ||
| 8D-2707 | [2] | SPUD AS | ||
| 2D-2629 | [1] | GROMMET | ||
| 2D-2630 | [1] | WASHER | ||
| 2D-2631 | [1] | NUT (0.482-26-THD) | ||
| CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT | ||||
#SEBP29970208
150-4377: CHART-WHEEL & TIRE
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (FOR USAGE REFER TO CHART) | ||||
| 1. | 102-8670 | [1] | WHEEL AS (REAR) | |
| 2. | 102-8682 | [1] | WHEEL AS | |
| 3. | 112-4410 | [1] | WHEEL AS (REAR) | |
| 4. | 112-4411 | [1] | WHEEL AS (REAR) | |
| 5. | 112-4412 | [1] | WHEEL AS (REAR) | |
| 6. | 114-5632 | [1] | WHEEL AS | |
| 7. | 119-7776 | [1] | WHEEL AS (REAR) | |
| 8. | 119-7785 | [1] | WHEEL AS (REAR) | |
| 9. | 119-7789 | [1] | WHEEL AS (REAR) | |
| 10. | 141-7221 | NUT-HEX FLANGE (3/4-16-THD) | ||
| 11. | 6D-0337 | [1] | VALVE GP-TIRE (BASIC) | |
| 6D-0443 | [1] | HOUSING AS-CORE | ||
| 2D-2628 | [1] | CORE-VALVE | ||
| 2D-2633 | [1] | CAP | ||
| 8D-2707 | [2] | SPUD AS | ||
| 2D-2629 | [1] | GROMMET | ||
| 2D-2630 | [1] | WASHER | ||
| 2D-2631 | [1] | NUT (0.482-26-THD) | ||
| CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT | ||||
#SEBP29970209
159-4962: CONTROL AR-POWER SHIFT XMSN
159-4962 CONTROL AR-POWER SHIFT XMSN
S/N 2BR1000-UP
TWO WHEEL DRIVE
AN ATTACHMENT
S/N 2BR1000-UP
TWO WHEEL DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 436C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 139-3559 Y | [1] | BOX GP-BATTERY | ||
| 138-7381 Y | [1] | FILLER GP-POWER TRAIN OIL | ||
| 142-0459 Y | [1] | FILM GP | ||
| 142-0458 Y | [1] | FLOOR MAT GP | ||
| 143-0789 Y | [1] | LINES GP-POWER TRAIN COOLER (POWER SHIFT) | ||
| 143-0788 Y | [1] | MOUNTING GP-ENGINE & XMSN (POWER SHIFT) | ||
| 142-4436 Y | [1] | TRANSMISSION AR-POWER SHIFT | ||
| 163-9198 Y | [1] | WIRING GP-POWER SHIFT | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
POWER TRAIN
AXLE GP
Operation and Maintenance Manual
Axle Universal Joint (Rear) - Lubricate - All Wheel Steer Machines Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Kingpin Bearings (Front) - Lubricate - Two-Wheel Drive Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Service Letter-NACD
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
Specifications
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Service Letter-China
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Service Letter-Asia
Systems Operation
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Testing and Adjusting
Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Final Drive And Axle Housing (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Service Magazine
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
