AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

109-2687 TIP GP-PENETRATION S/N 4HZ1-UP V680. VERTICAL PIN AN ATTACHMENT 5230B MINING EXCAVATOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP
SEAT GP
CAB GP

MINING EXCAVATOR 5230B MINING EXCAVATOR 4HZ
 5230B Excavator 4HZ00001-UP (MACHINE) POWERED BY 3516B Engine SEBP3018 5230B 4HZ   (1998)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
TIP GP-GENERAL PURPOSE
127-8567 TIP GP-GENERAL PURPOSE
TIP GP-GENERAL PURPOSE
6I-8686 TIP GP-GENERAL PURPOSE
TIP GP-PENETRATION
109-2687 TIP GP-PENETRATION
TIP GP-PENETRATION
143-3099 TIP GP-PENETRATION
 

#SEBP30180760
 

109-2687: TIP GP-PENETRATION

109-2687 TIP GP-PENETRATION
S/N 4HZ1-UP
V680. VERTICAL PIN
AN ATTACHMENT
i00091099 SEBP3018
1092687 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-9689 [1] TIP-PENETRATION  
2. 129-9688 [1] PIN  
3. 129-9689 [1] SLEEVE-RETAINING  
 

#SEBP30180761
 

143-3099: TIP GP-PENETRATION

143-3099 TIP GP-PENETRATION
S/N 4HZ1-UP
VERTICAL PIN
AN ATTACHMENT
i00699921 SEBP3018
1433099 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-3109 [1] TIP-PENETRATION  
2. 138-0101 [1] PIN  
3. 140-6889 [1] RETAINER AS  
 

#SEBP30180762
 

184-5462: AIR CONDITIONER & MOUNTING GP

184-5462 AIR CONDITIONER & MOUNTING GP
S/N 4HZ1-233
PART OF 178-7178 RISER AR-CAB
i01531973 SEBP3018
1845462 AIR CONDITIONER & MOUNTING GP Parts scheme 1845462 AIR CONDITIONER & MOUNTING GP Parts scheme 1845462 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8536 [2] CLAMP  
2. 158-5100 [1] HOSE  
3. 158-5101 [1] HOSE  
4. 5P-0600 [2] CLAMP-HOSE  
5. 158-5102 [1] HOSE  
6. 5P-3860 [2] CLAMP-HOSE  
7. 184-5096 Y [1] AIR CONDITIONER GP  
8. 133-8767 [1] BRACKET AS  
9. 5P-0765 E HOSE (120CM)  
10. 5P-6129 D TUBE (.3M)  
11. 9X-4994 [2] CONNECTOR  
12. 136-1953 E HOSE (1040CM)  
13. 5D-1026 [4] CLAMP-BAND  
14. 8X-6319 [1] CLAMP  
15. 8R-3393 [1] STRAP  
16. 151-5261 [1] ACCUMULATOR-REFRIGERANT  
17. 133-8660 I [1] HOSE AS  
18. 103-6100 [2] FITTING AS-AIR CONDITIONER (QUICK DISCONNECT)  
    (EACH INCLUDES)
  9X-7382 [2] SEAL-O-RING  
19. 175-7162 [1] DRYER AS-REFRIGERANT (IN-LINE)  
  7X-2049 [1] ORIFICE AS-AIR CONDITIONER  
20. 5P-7471 [1] CLIP (TAB)  
21. 5P-7470 [1] CLIP (SLOT)  
22. 7I-5351 I [1] HOSE AS  
23. 9M-8406 [14] CLIP (LOOP)  
24. 6D-1641 [8] CLIP (LOOP)  
25. 9X-8250 [2] CLIP  
26. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
28. 8T-4137 M [13] BOLT (M10X1.5X20-MM)  
29. 133-8663 I [1] HOSE AS  
30. 6P-8855 [2] SPACER-TUBE  
31. 125-9849 [1] GUARD  
33. 7K-3176 [2] COUPLING AS-REFRIGERANT (SELF-SEALING)  
    (EACH INCLUDES)
  107-4393 [1] VALVE AS  
  107-4394 [1] GASKET  
34. 8T-4133 M [7] NUT (M10X1.5-THD)  
35. 7I-5268 [1] PLATE  
36. 069-5341 [5] MOUNT  
37. 7X-7729 [19] WASHER (11X25X3-MM THK)  
38. 8T-4186 M [6] BOLT (M10X1.5X40-MM)  
39. 7I-5354 [1] ANGLE  
40. 7K-3304 [2] NUT-JAM (1-20-THD)  
41. 5P-4961 [4] CLAMP-HOSE  
42. 034-1432 [4] STRAP-CABLE  
43. 4P-7581 [2] CLIP (LADDER)  
44. 5P-5969 J SEAL (3DM)  
45. 8S-7583 [2] GROMMET  
46. 9X-7383 [4] SEAL-O-RING  
47. 9X-7380 [2] SEAL-O-RING  
48. 9X-7381 [2] SEAL-O-RING  
49. 9X-7382 [3] SEAL-O-RING  
50. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
51. 6G-2263 [5] SPACER (10.5X19X28.5-MM THK)  
52. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
53. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
54. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
57. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
58. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
59. 8T-4244 M [1] NUT (M12X1.75-THD)  
60. 6T-5105 [1] PLATE  
61. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
62. 7X-0491 [3] BOLT (5/16-24X0.625-IN)  
63. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
64. 133-8647 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
65. 1P-9744 [1] V-BELT (AIR CONDITIONER)  
66. 158-2942 [1] PULLEY  
67. 158-2943 [1] BUSHING  
68. 4S-5780 [1] ROD  
69. 8T-4193 M [1] BOLT (M16X2X50-MM)  
70. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
71. 8S-5383 [1] BLOCK  
72. 7X-0448 [2] NUT (5/8-11-THD)  
73. 8T-6868 M [6] BOLT (M12X1.75X80-MM)  
74. 7X-0590 [6] WASHER-HARD (13.5X44.5X6-MM THK)  
75. 037-5613 [6] MOUNT  
76. 6V-8997 [2] UNION  
77. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
78. 9X-8258 [2] WASHER (33X56X6-MM THK)  
79. 6V-9746 [11] SEAL-O-RING  
81. 5U-6758 [1] MOTOR GP-HYDRAULIC (AIR CONDITIONER)  
82. 8T-1159 M [2] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
83. 6V-8784 [1] TEE-FACE SEAL  
84. 3D-2824 [3] SEAL-O-RING  
85. 124-7458 I [1] HOSE AS  
86. 7X-3187 [1] BOLT (3/8-24X2.25-IN)  
87. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
88. 3E-4054 [1] FITTING AS-AIR CONDITIONER  
  3E-4051 [1] CAP-SEAL (LOW SIDE CHARGE PORT)  
  3E-4057 [1] VALVE AS (REFRIGERANT, LOW SIDE)  
89. 9X-7385 [2] SEAL-O-RING  
90. 6T-5104 [1] PLATE  
91. 4L-6454 [2] BOLT (3/8-16X1-IN)  
92. 147-0392 Y [1] COMPRESSOR GP-REFRIGERANT  
93. 3E-4060 [1] FITTING AS-COMPRESSOR  
  2L-1224 [1] CAP-SEAL (HIGH SIDE)  
  3E-4052 [1] CAP-SEAL (HIGH SIDE CHARGE PORT)  
  3E-4058 [1] VALVE AS (REFRIGERANT, HIGH SIDE)  
94. 114-0058 [1] PLATE-INSTRUCTION (A/C)  
95. 7K-1181 [1] STRAP-CABLE  
96. 125-8835 I [1] HOSE AS  
97. 124-5953 I [1] HOSE AS  
98. 158-2940 I [2] HOSE AS  
99. 5P-7815 [2] SEAL-O-RING  
100. 4S-6679 [2] ADAPTER  
101. 3K-0360 [1] SEAL-O-RING  
102. 6V-8397 [2] SEAL-O-RING  
103. 6V-8634 [1] CONNECTOR  
104. 6V-9007 [1] ELBOW  
105. 139-2626 I [1] HOSE AS  
106. 157-8510 [1] ADAPTER  
107. 5P-8112 [6] GROMMET  
108. 5P-7466 [6] CLIP (SLOT)  
109. 5P-7467 [6] CLIP (TAB)  
110. 6V-8994 [1] UNION (STRAIGHT)  
111. 6V-9168 [1] NUT (11/16-16-THD)  
113. 128-6847 [1] VALVE-CHECK (A/C LINE)  
114. 132-8544 I [1] HOSE AS  
115. 6V-0683 [2] GROMMET  
116. 5P-7463 [2] CLIP (TAB)  
117. 5P-7462 [2] CLIP (SLOT)  
118. 6V-9839 [1] TEE-SWIVEL  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180763
 

184-5462: AIR CONDITIONER & MOUNTING GP

184-5462 AIR CONDITIONER & MOUNTING GP
S/N 4HZ234-UP
PART OF 178-7178 RISER AR-CAB
i02003449 SEBP3018
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-9744 [1] V-BELT (AIR CONDITIONER)  
  4J-8536 [2] CLAMP  
  5D-1026 [4] CLAMP-BAND  
  5P-3860 [2] CLAMP-HOSE  
  5P-4961 [4] CLAMP-HOSE  
  6G-2263 [5] SPACER (10.5X19X28.5-MM THK)  
  6P-8855 [2] SPACER-TUBE  
  7I-5268 [1] PLATE  
  7I-5351 I [1] HOSE AS  
  7I-5354 [1] ANGLE  
  7K-1181 [1] STRAP-CABLE  
  7K-3176 [2] COUPLING AS-REFRIGERANT (SELF-SEALING)  
    (EACH INCLUDES)
  107-4393 [1] VALVE AS  
  107-4394 [1] GASKET  
  8S-5383 [1] BLOCK  
  9U-7072 C [2] CAP/PLUG-TAPERED  
  9X-4994 [2] CONNECTOR  
  037-5613 [6] MOUNT  
  069-5341 [5] MOUNT  
  103-6100 [2] FITTING AS-AIR CONDITIONER (QUICK DISCONNECT)  
    (EACH INCLUDES)
  9X-7382 [2] SEAL-O-RING  
  114-0058 [1] PLATE-INSTRUCTION (A/C)  
  125-8835 I [1] HOSE AS  
  125-9849 [1] GUARD  
  128-6847 [1] VALVE-CHECK (A/C LINE)  
  133-8660 I [1] HOSE AS  
  134-1045 C [1] DRYER-REFRIGERANT (IN-LINE)  
  3E-0068 [1] TUBE AS  
  153-3946 C [1] BRACKET  
  157-8510 [1] ADAPTER  
  158-2940 I [2] HOSE AS  
  158-2942 [1] PULLEY  
  158-2943 [1] BUSHING  
  158-5100 [1] HOSE  
  158-5101 [1] HOSE  
  158-5102 [1] HOSE  
  170-0235 C [1] ACCUMULATOR-REFRIGERANT (AIR CONDITIONER)  
  184-5096 Y [1] AIR CONDITIONER GP  
  214-6875 CY [1] MOTOR GP-PISTON  
  216-5000 CI [1] HOSE AS  
  219-0942 C [1] FITTING AS-AIR CONDITIONER  
  2L-1224 [1] CAP-SEAL (HIGH SIDE)  
  3E-4052 [1] CAP-SEAL (HIGH SIDE CHARGE PORT)  
  3E-4058 [1] VALVE AS (REFRIGERANT, HIGH SIDE)  
  180-7180 [1] CORE-VALVE  
  222-2276 C [1] COMPRESSOR GP-REFRIGERANT  
  229-4896 [2] SEAL-O-RING  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  226-9414 CI [1] HOSE AS  
  227-2436 C [1] PLATE  
  227-2437 C [1] MOUNT AS  
  227-4148 CI [1] HOSE AS  
  228-7117 CI [1] HOSE AS  
  228-8513 CI [1] HOSE AS  
  229-1519 C [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  231-3512 C [1] BRACKET  
  034-1432 [4] STRAP-CABLE  
  099-7241 C [1] WASHER-HARD (19X34X3-MM THK)  
  112-9783 C [1] ADAPTER  
  130-5300 C [1] CLIP  
  153-6781 C [2] U-BOLT  
  172-0986 C [1] FITTING AS-AIR CONDITIONER  
  3E-4051 [1] CAP-SEAL (LOW SIDE CHARGE PORT)  
  3E-4057 [1] VALVE AS (REFRIGERANT, LOW SIDE)  
  180-7180 [1] CORE-VALVE  
  180-7181 BODY-VALVE  
  2P-1293 C [1] LOCKNUT (1-3/16-12-THD)  
  3D-2824 [3] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  4P-7581 [2] CLIP (LADDER)  
  4S-5780 [1] ROD  
  4S-6679 C [1] ADAPTER  
  5C-7261 CM [3] NUT (M8X1.25-THD)  
  5K-9090 C [3] SEAL-O-RING  
  5P-0600 [2] CLAMP-HOSE  
  5P-4116 C [6] WASHER-HARD (8.8X20.5X2-MM THK)  
  5P-7462 [2] CLIP (SLOT)  
  5P-7463 [2] CLIP (TAB)  
  5P-7466 [6] CLIP (SLOT)  
  5P-7467 [6] CLIP (TAB)  
  5P-7470 [1] CLIP (SLOT)  
  5P-7471 [1] CLIP (TAB)  
  5P-8112 [6] GROMMET  
  6D-1641 [8] CLIP (LOOP)  
  6V-0683 [2] GROMMET  
  6V-8397 C [3] SEAL-O-RING  
  6V-8801 C [4] NUT (3/8-16-THD)  
  6V-8994 C [2] UNION (STRAIGHT)  
  6V-8997 [2] UNION  
  6V-8998 C [1] UNION  
  6V-9007 [1] ELBOW  
  6V-9168 [1] NUT (11/16-16-THD)  
  6V-9172 C [1] NUT (1-7/16-12-THD)  
  6V-9746 C [10] SEAL-O-RING  
  6V-9833 C [2] CAP AS  
  6V-9839 [1] TEE-SWIVEL  
  7K-3304 [2] NUT-JAM (1-20-THD)  
  7X-0448 [2] NUT (5/8-11-THD)  
  7X-0590 [6] WASHER-HARD (13.5X44.5X6-MM THK)  
  7X-2538 CM [1] BOLT (M8X1.25X100-MM)  
  7X-2539 CM [2] BOLT (M8X1.25X110-MM)  
  7X-7729 [19] WASHER (11X25X3-MM THK)  
  8S-7583 [2] GROMMET  
  8T-1159 M [2] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
  8T-4121 C [31] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4133 M [7] NUT (M10X1.5-THD)  
  8T-4136 M [11] BOLT (M10X1.5X25-MM)  
  8T-4137 CM [12] BOLT (M10X1.5X20-MM)  
  8T-4139 M [2] BOLT (M12X1.75X30-MM)  
  8T-4182 M [1] BOLT (M10X1.5X45-MM)  
  8T-4185 M [1] BOLT (M10X1.5X50-MM)  
  8T-4186 M [6] BOLT (M10X1.5X40-MM)  
  8T-4193 M [1] BOLT (M16X2X50-MM)  
  8T-4194 CM [1] BOLT (M12X1.75X50-MM)  
  8T-4195 M [3] BOLT (M10X1.5X30-MM)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  8T-4244 M [1] NUT (M12X1.75-THD)  
  8T-6466 M [4] BOLT (M10X1.5X60-MM)  
  8T-6868 M [6] BOLT (M12X1.75X80-MM)  
  8T-7520 C [1] TEE  
  9M-8406 C [13] CLIP (LOOP)  
  9X-7380 [2] SEAL-O-RING  
  9X-7381 [2] SEAL-O-RING  
  9X-7382 C [2] SEAL-O-RING  
  9X-7383 C [5] SEAL-O-RING  
  9X-7385 [2] SEAL-O-RING  
  9X-8250 [1] CLIP  
  9X-8257 C [3] WASHER (17.5X30X3.5-MM THK)  
  9X-8258 [2] WASHER (33X56X6-MM THK)  
  9X-8259 C [2] WASHER (39X66X6-MM THK)  
  5P-0765 E HOSE (120CM)  
  136-1953 E HOSE (1040CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180764
 

184-5096: AIR CONDITIONER GP

184-5096 AIR CONDITIONER GP
S/N 4HZ1-229
PART OF 184-5462 AIR CONDITIONER & MOUNTING GP
i01461436 SEBP3018
1845096 AIR CONDITIONER GP Parts scheme 1845096 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-2376 [2] WASHER (7X16X0.8-MM THK)  
2. 3B-4501 [2] LOCKWASHER  
3. 3E-5464 [1] SWITCH AS-THERMOSTAT (HVAC)  
4. 3S-2093 [3] STRAP-CABLE  
5. 7G-8116 [2] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)(AIR CONDITIONER)  
    -OR-
  141-7903 [2] FILTER ELEMENT-CAB AIR (ULTRA HIGH EFF, CHARCOAL)(A/C)(ODOR REMOVAL CAPABILITIES)  
6. 7K-3262 [2] SCREW (THUMB)  
7. 7T-5856 [4] CLAMP  
8. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
9. 9X-2185 [4] SCREW (8-15X0.44-IN)  
10. 9X-2488 [2] CLAMP-HOSE  
11. 9X-4383 [1] RESISTOR  
12. 9X-8117 [2] TUBE AS  
13. 141-9784 M [1] BOLT (M6X1X190-MM)  
14. 145-4749 [1] COIL AS-HEATER  
15. 145-4750 [1] COIL AS-EVAPORATOR  
16. 145-4751 [1] PLATE  
17. 145-4752 [1] COVER  
18. 145-4753 [1] ANGLE  
19. 145-4754 [2] WHEEL-BLOWER  
20. 145-4755 [1] GASKET  
21. 145-4756 [1] GASKET  
22. 145-4757 [1] GASKET  
23. 145-4758 [1] FILTER ELEMENT-CAB AIR (AIR CONDITIONING)  
24. 145-4759 [1] GASKET  
25. 145-4760 [1] GASKET  
26. 145-4761 [1] GASKET  
27. 145-4762 [4] PLATE-ORIFICE  
28. 145-4764 [1] BLOWER AS  
29. 145-4765 [1] COVER AS  
30. 145-4767 [1] CASE AS  
31. 145-4768 [1] GASKET  
32. 146-3506 L [2] MOTOR AS  
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
33. 149-8218 [1] CONTROL AS-BOARD  
34. 184-5182 [1] HARNESS AS-MOTOR  
35. 184-5183 [1] VALVE AS  
36. 068-8993 [1] GROMMET  
37. 1P-6522 [1] GROMMET  
38. 2S-3745 [16] SCREW-TAPPING (10-16X0.5-IN)  
39. 2V-3216 [1] CLIP  
40. 5C-2890 M [7] NUT (M6X1-THD)  
41. 5P-4115 [35] WASHER-HARD (7.2X19X2-MM THK)  
42. 6L-7159 [2] SCREW-MACHINE (8-32X0.313-IN)  
43. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
44. 8T-4138 M [22] BOLT (M6X1X20-MM)  
45. 8T-4171 M [6] BOLT (M6X1X12-MM)  
46. 136-1953 E HOSE (10 CM)  
47. 5P-7070 D INSULATION-STRIP (35 CM)  
47A. 5P-7070 D INSULATION-STRIP (15 CM)  
48. 5P-5908 D SEAL (40 CM)  
49. 5P-5639 D SEAL (170 CM)  
50. 5P-5637 D SEAL (56.5 CM EACH)  
50A. 5P-5637 D SEAL (25.4 CM EACH)  
   
    AVAILABLE REPAIR KIT(S):
  102-8802 JL [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & PART MARKED J)
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
 

#SEBP30180765
 

184-5096: AIR CONDITIONER GP

184-5096 AIR CONDITIONER GP
S/N 4HZ230-UP
PART OF 184-5462 AIR CONDITIONER & MOUNTING GP
i02158331 SEBP3018
1845096 AIR CONDITIONER GP Parts scheme 1845096 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-2376 [2] WASHER (7X16X0.8-MM THK)  
2. 3B-4501 [2] LOCKWASHER  
3. 3E-5464 [1] SWITCH AS-THERMOSTAT (HVAC)(AIR CONDITIONER)  
4. 3S-2093 [3] STRAP-CABLE  
5. 7G-8116 [2] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)(AIR CONDITIONER)  
    -OR-
  141-7903 [2] FILTER ELEMENT-CAB AIR (ULTRA HIGH EFF, CHARCOAL)  
6. 7K-3262 [2] SCREW (THUMB)  
7. 7T-5856 [4] CLAMP  
8. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
9. 9X-2185 [4] SCREW (8-15X0.44-IN)  
10. 9X-2488 [2] CLAMP-HOSE  
11. 9X-4383 [1] RESISTOR  
12. 9X-8117 [2] TUBE AS  
13. 141-9784 M [1] BOLT (M6X1X190-MM)  
14. 145-4749 [1] COIL AS-HEATER  
15. 145-4750 [1] COIL AS-EVAPORATOR  
16. 145-4751 [1] PLATE  
17. 145-4752 [1] COVER  
18. 145-4753 [1] ANGLE  
19. 145-4754 [2] WHEEL-BLOWER  
20. 145-4755 [1] GASKET  
21. 145-4756 [1] GASKET  
22. 145-4757 [1] GASKET  
23. 145-4758 [1] FILTER ELEMENT-CAB AIR (AIR CONDITIONING)  
24. 145-4759 [1] GASKET  
25. 145-4760 [1] GASKET  
26. 145-4761 [1] GASKET  
27. 145-4762 [4] PLATE-ORIFICE  
28. 145-4764 [1] BLOWER AS  
29. 145-4765 [1] COVER AS  
30. 145-4767 [1] CASE AS  
31. 145-4768 [1] GASKET  
32. 146-3506 [2] MOTOR AS (BLOWER)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
33. 184-5182 [1] HARNESS AS-MOTOR  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
34. 205-4285 C [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
35. 239-5534 C [1] VALVE AS-WATER (ELECTRONIC)  
36. 239-5611 C [1] BRACKET AS  
37. 239-7414 C [1] HARNESS AS-CONTROL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
38. 239-9368 C [1] RESISTOR AS  
39. 241-7691 C [1] HARNESS AS-HEATER & AIR COND (POWER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
40. 068-8993 [1] GROMMET  
41. 096-6166 C [2] WASHER-HARD (4.5X9X1-MM THK)  
42. 1P-6522 [1] GROMMET  
43. 2S-3745 [16] SCREW-TAPPING (10-16X0.5-IN)  
44. 2V-3216 [1] CLIP  
45. 5C-2890 M [7] NUT (M6X1-THD)  
46. 5P-4115 [35] WASHER-HARD (7.2X19X2-MM THK)  
47. 6L-7159 [2] SCREW-MACHINE (8-32X0.313-IN)  
48. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
49. 8T-0285 CM [2] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-4138 M [22] BOLT (M6X1X20-MM)  
51. 8T-4171 M [6] BOLT (M6X1X12-MM)  
52. 136-1953 E HOSE (10-CM)  
53. 5P-7070 BD INSULATION-STRIP  
54. 5P-5908 BD SEAL  
55. 5P-5639 BD SEAL  
56. 5P-5637 BD SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP30180766
 

8Y-4200: ARMREST GP

8Y-4200 ARMREST GP
S/N 4HZ1-UP
PART OF 8Y-6977 SEAT GP-SUSPENSION
AN ATTACHMENT
i00089805 SEBP3018
8Y4200 ARMREST GP Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5904 Y [1] ARMREST GP (RH)  
2. 8Y-5897 [1] BRACKET AS  
3. 7X-0456 [1] BOLT (7/16-14X4.5-IN)  
4. 0S-1594 [1] BOLT (3/8-16X1-IN)  
5. 5V-1498 [1] LOCKNUT (3/8-16-THD)  
6. 9X-8873 [1] BOLT (1/2-13X2.25-IN)  
7. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
8. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
   
  8Y-6051 F [1] SPACER (11.19X14.21X14.24-MM THK)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180767
 

8Y-5904: ARMREST GP

8Y-5904 ARMREST GP
S/N 4HZ1-UP
PART OF 8Y-4200, 8Y-6000 ARMREST GP
AN ATTACHMENT
i00089806 SEBP3018
8Y5904 ARMREST GP Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5906 [1] BASE-ARMREST (LH)  
2. 8S-7803 L [1] RING-RETAINING  
3. 6V-2687 J [4] SCREW-PAN HEAD (10-24X1-IN)  
4. 8T-8641 L [1] WASHER (9.8X16X0.8-MM THK)  
5. 3E-4312 L [1] NUT-SQUARE (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  8Y-5988 J [1] KIT-CUSHION (ARMREST)  
    (ALSO INCLUDES CUSHION AS)
  8Y-6028 L [1] KIT-ADJUSTER (ARMREST)  
    (ALSO INCLUDES KNOB AS & SPRING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
 

#SEBP30180768
 

8Y-6000: ARMREST GP

8Y-6000 ARMREST GP
S/N 4HZ1-UP
PART OF 8Y-6977 SEAT GP-SUSPENSION
AN ATTACHMENT
i00089808 SEBP3018
8Y6000 ARMREST GP Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5904 Y [1] ARMREST GP (LH)  
2. 8Y-5898 [1] BRACKET AS  
3. 7X-0456 [1] BOLT (7/16-14X4.5-IN)  
4. 0S-1594 [1] BOLT (3/8-16X1-IN)  
5. 5V-1498 [1] LOCKNUT (3/8-16-THD)  
6. 9X-8873 [1] BOLT (1/2-13X2.25-IN)  
7. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
8. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
   
  8Y-6051 F [1] SPACER (11.19X14.21X14.24-MM THK)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180769
 

166-8792: CAB AR

166-8792 CAB AR
S/N 4HZ1-UP
PART OF 146-7560 COMMON AR
i01461500 SEBP3018
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  172-6070 Y [1] CAB GP  
  136-2005 Y [1] CONSOLE GP-INSTRUMENT (RH)  
  135-4432 Y [1] CONTROL GP-PILOT OPERATED HYD  
  135-4433 Y [1] CONTROL GP-PILOT OPERATED HYD (RH)  
  135-4434 Y [1] CONTROL GP-PILOT OPERATED HYD (LH)  
  175-6838 Y [1] FAN GP-CIRCULATING  
  140-5882 Y [1] INSTALLATION GP-RADIO  
  147-0879 Y [1] LITERATURE GP (OWNER - OPERATOR)  
  Y [1] PLATE & FILM GP  
  129-8221 Y [1] SCREEN GP-SUN  
  6I-7140 Y [1] SEAT GP-COMPANION  
  190-3642 Y [1] VISOR GP-CAB  
  140-8100 Y [1] WIPER & WASHER GP-WINDOW  
  166-8788 Y [1] WIRING GP-CAB  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Ground Engaging Tools - Inspect/Replace
5230B Excavator
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Dual Snap Ring Retainers For Vertical Pins Are Now Available {6805, 6812}
2004/08/16
Inspection , Repair, and Replacement of Base Edge Protector Lug Welds {6515, 6537, 6823}
2004/12/20

Caterpillar Parts SIS Catalog 5230B :

TIP GP-GENERAL PURPOSE
6I-8686 TIP GP-GENERAL PURPOSE
TIP GP-GENERAL PURPOSE
127-8567 TIP GP-GENERAL PURPOSE
TIP GP-GENERAL PURPOSE
120-0101 TIP GP-GENERAL PURPOSE
PROTECTOR GP-SIDE BAR
125-1108 PROTECTOR GP-SIDE BAR
PROTECTOR GP-SIDE BAR
125-1106 PROTECTOR GP-SIDE BAR
PROTECTOR GP-EDGE
125-1105 PROTECTOR GP-EDGE
PROTECTOR GP-EDGE
107-3289 PROTECTOR GP-EDGE
PLATE GP-WEAR
136-1108 PLATE GP-WEAR
TIP GP-PENETRATION
143-3099 TIP GP-PENETRATION
AIR CONDITIONER & MOUNTING GP
184-5462 AIR CONDITIONER & MOUNTING GP
184-5462 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER GP
184-5096 AIR CONDITIONER GP
AIR CONDITIONER GP
184-5096 AIR CONDITIONER GP
ARMREST GP
8Y-4200 ARMREST GP
ARMREST GP
8Y-5904 ARMREST GP
ARMREST GP
8Y-6000 ARMREST GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.