AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-9865 LINES GP-RIPPER S/N ACL1-UP PART OF 162-9514 CONTROL AR-HYDRAULIC IMPLEMENT D9R TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
LINES GP-RIPPER
LINES GP-CYLINDER
MANIFOLD GP
CYLINDER GP

TRACK-TYPE TRACTOR D9R TRACK-TYPE TRACTOR ACL
 D9R Track-Type Tractor Power Shift ACL00001-UP (MACHINE) POWERED BY 3408 Engine SEBP3034 D9R ACL   (1999)

HYDRAULIC SYSTEM

LINES GP-RIPPER
LINES GP-RIPPER
135-6410 LINES GP-RIPPER
LINES GP-RIPPER
8E-9865 LINES GP-RIPPER
 

#SEBP30340550
 

8E-9865: LINES GP-RIPPER

8E-9865 LINES GP-RIPPER
S/N ACL1-UP
PART OF 162-9514 CONTROL AR-HYDRAULIC IMPLEMENT
i00713481 SEBP3034
8E9865 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8269 C [1] MANIFOLD  
2. 8C-3206 C [16] FLANGE-HALF  
3. 5S-7382 C [12] BOLT (3/8-16X1.375-IN)  
4. 8T-4896 C [22] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 5H-4019 C [1] COVER  
6. 8T-4121 C [32] WASHER-HARD (11X21X2.5-MM THK)  
7. 1P-4577 [8] FLANGE-HALF  
8. 4J-0520 C [17] SEAL-O-RING  
9. 8E-7881 [1] BRACKET AS  
  7G-5984 [2] CLIP (TAB)  
10. 4L-6454 [2] BOLT (3/8-16X1-IN)  
11. 7G-5986 [2] GROMMET  
12. 7G-5985 [2] CLIP (SLOT)  
13. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
14. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
  6V-8801 [2] NUT (3/8-16-THD)  
  7X-0578 [4] WASHER-HARD (10.2X32X2.5-MM THK)  
15. 8E-7883 I [2] HOSE AS  
16. 8E-7882 I [2] HOSE AS  
17. 7X-0288 [4] BOLT (3/8-16X1.625-IN)  
18. 117-8727 [1] PLATE-ORIFICE  
19. 8T-4196 CM [32] BOLT (M10X1.5X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP30340551
 

163-1580: LINES GP-TILT CYLINDER

163-1580 LINES GP-TILT CYLINDER
S/N ACL1-692
PART OF 162-9514 CONTROL AR-HYDRAULIC IMPLEMENT
i01063979 SEBP3034
1631580 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3408 [1] BRACKET AS  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
2. 6Y-3567 [1] ELBOW  
3. 6Y-3568 [1] COVER  
4. 7G-3606 [1] BLOCK  
5. 6Y-3406 I [1] HOSE AS  
6. 163-1834 I [1] HOSE AS  
7. 1P-4576 [6] FLANGE-HALF  
8. 1P-4577 [2] FLANGE-HALF  
9. 2D-8155 [2] STUD-TAPERLOCK (1/2-13X3.58-IN)  
10. 4J-0520 [3] SEAL-O-RING  
11. 4J-5267 [3] SEAL-O-RING  
12. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
13. 5H-4018 [2] COVER  
14. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
15. 5S-7382 [16] BOLT (3/8-16X1.375-IN)  
16. 6V-8188 [2] NUT (1/2-13-THD)  
17. 7G-3832 [3] GROMMET  
18. 7G-3833 [3] CLIP (TAB)  
19. 7G-3834 [3] CLIP (SLOT)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4223 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-8915 [2] BOLT (3/8-16X3.25-IN)  
24. 8T-8917 [5] BOLT (1/2-13X1.25-IN)  
25. 5P-7466 [1] CLIP (SLOT)  
26. 5P-7467 [1] CLIP (TAB)  
27. 5P-8112 [1] GROMMET  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP30340552
 

163-1580: LINES GP-TILT CYLINDER

163-1580 LINES GP-TILT CYLINDER
S/N ACL693-UP
PART OF 162-9514 CONTROL AR-HYDRAULIC IMPLEMENT
i01546394 SEBP3034
1631580 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3408 [1] BRACKET AS  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
2. 6Y-3567 [1] ELBOW  
3. 6Y-3568 [1] COVER  
4. 7G-3606 [1] BLOCK  
5. 301-4266 I [1] HOSE AS  
6. 301-4265 I [1] HOSE AS  
7. 1P-4576 [6] FLANGE-HALF  
8. 1P-4577 [2] FLANGE-HALF  
9. 2D-8155 [2] STUD-TAPERLOCK (1/2-13X3.58-IN)  
10. 4J-0520 [3] SEAL-O-RING  
11. 4J-5267 [3] SEAL-O-RING  
12. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
13. 5H-4018 [2] COVER  
14. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
15. 5S-7382 [16] BOLT (3/8-16X1.375-IN)  
16. 6V-8188 [2] NUT (1/2-13-THD)  
17. 7G-3832 [3] GROMMET  
18. 7G-3833 [3] CLIP (TAB)  
19. 7G-3834 [3] CLIP (SLOT)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-8915 [2] BOLT (3/8-16X3.25-IN)  
24. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP30340553
 

163-1581: LINES GP-TILT CYLINDER

163-1581 LINES GP-TILT CYLINDER -DUAL
S/N ACL1-UP
PART OF 163-1588 CONTROL AR-DUAL TILT
AN ATTACHMENT
i01080400 SEBP3034
1631581 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-3998 [1] SPACER (2.47-IN THK)  
2. 8E-7111 [1] PLATE  
3. 8E-7112 [1] ELBOW  
4. 163-1835 I [1] HOSE AS  
5. 188-3384 I [1] HOSE AS  
6. 8E-7108 I [1] HOSE AS  
7. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
8. 150-3036 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1905 [1] ELBOW  
9. 150-4034 [1] TEE AS  
  6V-8397 [3] SEAL-O-RING  
  8T-0379 [1] TEE-BULKHEAD  
10. 1J-8668 [1] STUD-TAPERLOCK (3/8-16X1.97-IN)  
11. 1S-0996 [7] CLIP  
13. 1S-6420 [2] CLIP  
14. 4J-0520 [2] SEAL-O-RING  
15. 4J-5267 [1] SEAL-O-RING  
16. 5P-2228 [2] BOLT (1/2-13X1-IN)  
17. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
18. 5P-7466 [1] CLIP (SLOT)  
19. 5P-7467 [1] CLIP (TAB)  
20. 5P-8112 B [1] GROMMET  
21. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
22. 6V-8801 [1] NUT (3/8-16-THD)  
23. 1P-7009 [1] CLIP  
24. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 8T-5360 [3] WASHER (12X22.5X2.5-MM THK)  
27. 8T-9391 [1] BOLT (1/2-13X3.75-IN)  
28. 8T-9379 [4] BOLT (3/8-16X4.25-IN)  
29. 8T-9380 [3] BOLT (7/16-14X1-IN)  
30. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP30340554
 

8E-9890: LINES GP-TILT CYLINDER

8E-9890 LINES GP-TILT CYLINDER
S/N 9MP1-UP; 9RP1-UP
PART OF 163-4550, 163-4552 BULLDOZER AR-SEMI-UNIVERSAL, 163-4551, 163-4553 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00417792 SEBP3034
8E9890 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-9970 I [1] HOSE AS  
2. 4J-5267 [9] SEAL-O-RING  
3. 5H-2095 [4] CLAMP-TUBE  
4. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
5. 8C-3205 [12] FLANGE-HALF  
6. 8E-9445 [1] GUARD AS (RH)  
7. 3G-7452 I [1] HOSE AS  
8. 9X-2027 [4] WASHER (11X18X2-MM THK)  
9. 110-5205 [2] TUBE AS  
10. 110-5207 [2] GUARD  
11. 110-5890 [1] TUBE AS  
12. 111-7745 I [1] HOSE AS  
13. 111-7746 I [1] HOSE AS  
14. 115-2947 [1] GUARD AS  
  8L-5771 [3] SPACER (2X3X0.88-IN THK)  
15. 7X-2573 M [4] BOLT (M24X3X40-MM)  
16. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
18. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
19. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
21. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP30340555
 

8E-9891: LINES GP-TILT CYLINDER

8E-9891 LINES GP-TILT CYLINDER -DUAL
S/N ACL1-UP
PART OF 106-7362 CYLINDER AR-DUAL TILT
AN ATTACHMENT
i01098543 SEBP3034
8E9891 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-7468 [6] CLAMP  
2. 4T-3981 [6] CLIP  
3. 6I-8514 [2] ANGLE  
4. 6I-8515 [1] ANGLE  
5. 6I-8516 [2] ANGLE  
6. 7W-3447 [8] SPACER (10.2X19.05X10.2-MM THK)  
7. 8E-3600 [10] PLATE  
8. 8E-9427 I [1] HOSE AS  
9. 8E-9428 I [1] HOSE AS  
10. 8E-9433 [1] GUARD AS  
11. 8E-9436 I [2] HOSE AS  
13. 8E-9438 [1] GUARD AS  
  8L-5771 [3] SPACER (2X3X0.88-IN THK)  
14. 8E-9445 [1] GUARD AS (RH)  
15. 8E-9446 [1] GUARD AS (LH)  
16. 9W-2877 [2] CLAMP  
17. 108-1225 [2] TUBE AS  
18. 108-1226 [2] TUBE AS  
19. 110-5205 [2] TUBE AS  
20. 110-5890 [2] TUBE AS  
21. 111-1588 [2] TUBE AS  
22. 112-2671 I [1] HOSE AS  
23. 118-8138 I [1] HOSE AS  
24. 146-3672 C [1] GUARD  
25. 165-3726 CI [2] HOSE AS  
27. 193-7004 I [1] HOSE AS  
28. 200-2354 CI [1] HOSE AS  
29. 129-5082 C [6] BLOCK  
30. 4J-0520 [2] SEAL-O-RING  
31. 4J-5267 [22] SEAL-O-RING  
32. 5P-1076 C [12] WASHER-HARD (13.5X30X4-MM THK)  
33. 7G-3832 [1] GROMMET  
34. 7G-3833 [1] CLIP (TAB)  
35. 7G-3834 [1] CLIP (SLOT)  
36. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
37. 7X-2553 M [3] BOLT (M16X2X40-MM)  
38. 7X-2573 M [8] BOLT (M24X3X40-MM)  
39. 8C-3205 [32] FLANGE-HALF  
40. 8C-3206 [4] FLANGE-HALF  
41. 8T-4121 [84] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
43. 8T-4139 CM [14] BOLT (M12X1.75X30-MM)  
44. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
45. 8T-4182 M [14] BOLT (M10X1.5X45-MM)  
46. 8T-4185 M [8] BOLT (M10X1.5X50-MM)  
47. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
48. 8T-4196 M [64] BOLT (M10X1.5X35-MM)  
49. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
50. 8T-4244 M [2] NUT (M12X1.75-THD)  
51. 9X-2027 [8] WASHER (11X18X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP30340556
 

6E-4138: MANIFOLD GP-VALVE

6E-4138 MANIFOLD GP-VALVE
S/N ACL1-UP
PART OF 187-8636 VALVE GP-BANK 4
Type 1
i00399683 SEBP3034
6E4138 MANIFOLD GP-VALVE Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1886 [1] MANIFOLD-INLET  
2. 6E-4139 Y [1] VALVE GP-RELIEF (MAIN)  
3. 4T-5896 Y [1] VALVE GP-CHECK (IMPLEMENT INLET MANIFOLD)  
4. 4T-1008 Y [1] VALVE GP-RELIEF (CHARGING)  
5. 9S-4182 [2] PLUG (7/16-20-THD)  
6. 3J-7354 [2] SEAL-O-RING  
7. 8J-6815 [1] PLUG-ORIFICE  
8. 9S-8005 [1] PLUG (3/4-16-THD)  
9. 3K-0360 [1] SEAL-O-RING  
10. 9S-4191 [2] PLUG (9/16-18-THD)  
11. 3J-1907 [2] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30340557
 

6E-4138: MANIFOLD GP-VALVE

6E-4138 MANIFOLD GP-VALVE
S/N ACL1-UP
PART OF 187-8636 VALVE GP-BANK 4
Type 2
i05156705 SEBP3034
6E4138 MANIFOLD GP-VALVE Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1886 [1] MANIFOLD-INLET  
2. 6E-4139 Y [1] VALVE GP-RELIEF (MAIN)  
3. 4T-5896 Y [1] VALVE GP-CHECK (IMPLEMENT INLET MANIFOLD)  
4. 104-7574 CY [1] VALVE GP-RELIEF (CHARGING)  
5. 155-3624 C [2] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
6. 148-8407 C [2] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
7. 8J-6815 [1] PLUG-ORIFICE  
8. 148-8395 C [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30340558
 

168-6575: MOUNTING GP-CYLINDER

168-6575 MOUNTING GP-CYLINDER
S/N ACL1-UP; 9MP1-UP; 9RP1-UP
PART OF 163-4550 BULLDOZER AR-SEMI-UNIVERSAL, 163-4551 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i01088381 SEBP3034
1686575 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 4T-4875 [2] PIN  
3. 154-1580 [8] WASHER-HARD (22X38X6-MM THK)  
4. 168-6448 [2] SEAL-LIP TYPE  
5. 296-5363 [2] YOKE AS  
6. 241-3853 [4] CAP AS  
    (EACH INCLUDES)
  9J-5284 [1] BUSHING  
7. 8T-4170 M [8] BOLT (M20X2.5X150-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
 

#SEBP30340559
 

246-1043: MOUNTING GP-CYLINDER

246-1043 MOUNTING GP-CYLINDER
S/N 9MP1-UP; 9RP1-UP
PART OF 163-4550 BULLDOZER AR-SEMI-UNIVERSAL, 163-4551 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i02003826 SEBP3034
2461043 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CYLINDER)  
2. 4T-4875 [2] PIN  
3. 154-1580 [8] WASHER-HARD (22X38X6-MM THK)  
4. 168-6448 [2] SEAL-LIP TYPE  
5. 233-4657 [2] YOKE  
6. 241-3853 [4] CAP AS  
    (EACH INCLUDES)
6A. 9J-5284 [1] BUSHING  
7. 8T-4170 M [8] BOLT (M20X2.5X150-MM)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D9R :

LINES GP-RIPPER
135-6410 LINES GP-RIPPER
LINES GP-PUMP
163-1583 LINES GP-PUMP
LINES GP-PUMP
163-1583 LINES GP-PUMP
137-7374 LINES GP-PIN PULLER CYLINDER
LINES GP-PIN PULLER CYLINDER
135-5112 LINES GP-PIN PULLER CYLINDER
LINES GP-LIFT CYLINDER
163-1582 LINES GP-LIFT CYLINDER
195-1174 LINES GP-BULLDOZER
132-9271 LINES GP-BULLDOZER
LINES GP-TILT CYLINDER
163-1580 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
163-1580 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
163-1581 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8E-9890 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
8E-9891 LINES GP-TILT CYLINDER
MANIFOLD GP-VALVE
6E-4138 MANIFOLD GP-VALVE
MANIFOLD GP-VALVE
6E-4138 MANIFOLD GP-VALVE
MOUNTING GP-CYLINDER
168-6575 MOUNTING GP-CYLINDER

Truck sale:

 
 
Caterpillar D9R
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D9R, Crawler dozers, Construction
276,938 
Caterpillar D9R, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D 9 R, Crawler dozers, Construction
260,000 
Caterpillar D 9 R, Crawler dozers, Construction

MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D9R, Rupsdozers, Bouw
132.000 
Caterpillar D9R, Rupsdozers, Bouw

CLEVELAND BROTHERS EQUIPMENT COMPANY INC
 
 
Caterpillar D9R MS RIP, Aufreisser, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.