AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

192-7656 FORK GP-LOG -PIN-ON Type 1 FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT


WORK TOOLS
FORK GP

FORK-LOG AND LUMBER FORK-LOG AND LUMBER 7RW
 Log & Lumber Forks 7RW00001-UP (MACHINE) SEBP3081 7RW   (2014)

WORK TOOLS

FORK GP
FORK GP-LOG
190-3982 FORK GP-LOG
FORK GP-LOG
190-3982 FORK GP-LOG
FORK GP-LOG
192-7656 FORK GP-LOG
FORK GP-LOG
192-7656 FORK GP-LOG
FORK GP-LOG
352-7339 FORK GP-LOG
FORK GP-LOG
352-7339 FORK GP-LOG
 

#SEBP30810010
 

192-7656: FORK GP-LOG

192-7656 FORK GP-LOG -PIN-ON
Type 1
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i01461869 SEBP3081
1927656 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 8T-4244 M [4] NUT (M12X1.75-THD)  
4. 153-3742 [2] TIP-WEAR  
5. 153-3743 [4] PIN-RETAINER  
6. 153-3744 [4] RING-RETAINING  
7. 203-2208 Y [2] CYLINDER GP-FORK  
8. 153-3750 [2] PIN-PIVOT  
9. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
10. 159-8038 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
11. 160-9881 [2] PIN AS  
12. 169-8238 [2] PIN AS  
13. 177-3034 I [1] HOSE AS  
14. 190-7487 I [1] HOSE AS  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 192-1270 I [2] HOSE AS  
17. 192-2929 [1] CLAMP AS  
  7K-9209 [4] SEAL-LIP TYPE  
  8K-2360 [4] BUSHING  
18. 197-2961 I [1] HOSE AS  
19. 116-2566 I [1] HOSE AS  
20. 3D-2824 [4] SEAL-O-RING  
21. 3E-7443 [2] TEE-UNION  
22. 5K-9090 [4] SEAL-O-RING  
23. 5P-7468 [2] CLIP (SLOT)  
24. 5P-7469 [2] CLIP (TAB)  
25. 5P-8444 [2] GROMMET (37-MM ID)  
26. 6V-9007 [4] ELBOW  
27. 6V-9746 [8] SEAL-O-RING  
28. 6V-9854 [2] ELBOW (SWIVEL)  
29. 7G-3832 [4] GROMMET  
30. 7G-3833 [4] CLIP (TAB)  
31. 7G-3834 [4] CLIP (SLOT)  
32. 7X-2563 M [2] BOLT (M20X2.5X60-MM)  
33. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
34. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
35. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
36. Y [1] FRAME GP-FORK (PIN-ON)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810011
 

192-7656: FORK GP-LOG

192-7656 FORK GP-LOG -PIN-ON
Type 2
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i03921769 SEBP3081
1927656 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 8T-4244 M [4] NUT (M12X1.75-THD)  
4. 153-3742 [2] TIP-WEAR  
5. 153-3743 [4] PIN-RETAINER  
6. 153-3744 [4] RING-RETAINING  
7. 203-2208 Y [2] CYLINDER GP-FORK  
8. 153-3750 [2] PIN-PIVOT  
9. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
10. 159-8038 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
11. 160-9881 [2] PIN AS  
12. 169-8238 [2] PIN AS  
13. 177-3034 I [1] HOSE AS  
14. 190-7487 I [1] HOSE AS  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 192-1270 I [2] HOSE AS  
17. 192-2929 [1] CLAMP AS  
  7K-9209 [4] SEAL-LIP TYPE  
  8K-2360 [4] BUSHING  
18. 197-2961 I [1] HOSE AS  
19. 116-2566 I [1] HOSE AS  
20. 3D-2824 [4] SEAL-O-RING  
21. 3E-7443 [2] TEE-UNION  
22. 5K-9090 [4] SEAL-O-RING  
23. 5P-7468 [2] CLIP (SLOT)  
24. 5P-7469 [2] CLIP (TAB)  
25. 5P-8444 [2] GROMMET (37-MM ID)  
26. 6V-9007 [4] ELBOW  
27. 6V-9746 [8] SEAL-O-RING  
28. 6V-9854 [2] ELBOW (SWIVEL)  
29. 7G-3832 [4] GROMMET  
30. 7G-3833 [4] CLIP (TAB)  
31. 7G-3834 [4] CLIP (SLOT)  
32. 7X-2563 M [2] BOLT (M20X2.5X60-MM)  
33. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
34. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
35. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 312-5694 C [1] SETSCREW (1/4-20X0.25-IN)  
37. Y [1] FRAME GP-FORK (PIN-ON)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810012
 

352-7339: FORK GP-LOG

352-7339 FORK GP-LOG -HOOK-ON
Type 1
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i04758715 SEBP3081
3527339 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
3. 8G-6122 [2] SPACER (23X40X19-MM THK)  
4. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
5. 353-7022 Y [1] FRAME GP-FORK  
6. 353-7023 [1] CLAMP AS  
6A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
6B. 7K-9209 [4] SEAL-LIP TYPE  
6C. 361-4648 [2] BUSHING  
7. 353-7024 [2] PIN AS  
8. 353-7026 [2] PIN AS  
9. 353-7027 [2] PIN AS  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 353-8637 I [2] HOSE AS  
12. 353-8639 I [1] HOSE AS  
13. 353-8640 I [1] HOSE AS  
14. 353-8641 I [1] HOSE AS  
15. 353-8642 I [1] HOSE AS  
16. 361-4301 Y [2] CYLINDER GP-FORK  
17. 361-5580 I [2] HOSE AS  
18. 2P-1293 [4] LOCKNUT (1-3/16-12-THD)  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 3D-2824 [4] SEAL-O-RING  
21. 6V-8983 [4] ELBOW  
22. 6V-9007 [4] ELBOW  
23. 6V-9160 [2] TEE-FACE SEAL  
24. 6V-9746 [18] SEAL-O-RING  
25. 6V-9832 [2] CAP (ORFS)  
26. 7G-3832 [1] GROMMET  
27. 7G-3833 [1] CLIP (TAB)  
28. 7G-3834 [1] CLIP (SLOT)  
29. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
30. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810013
 

352-7339: FORK GP-LOG

352-7339 FORK GP-LOG -HOOK-ON
Type 2
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i04805846 SEBP3081
3527339 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
3. 8G-6122 [2] SPACER (23X40X19-MM THK)  
5. 385-2585 CY [1] FRAME GP-FORK (HOOK ON)  
6. 385-1430 C [1] CLAMP AS  
6A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
6B. 7K-9209 [4] SEAL-LIP TYPE  
6C. 361-4648 [2] BUSHING  
7. 353-7024 [2] PIN AS  
8. 385-3395 C [2] PIN AS  
9. 385-5357 C [2] PIN AS  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 380-1052 CI [2] HOSE AS  
12. 385-6718 CI [1] HOSE AS  
13. 385-6719 CI [1] HOSE AS  
14. 385-6720 CI [1] HOSE AS  
15. 385-6721 CI [1] HOSE AS  
16. 385-4585 CY [2] CYLINDER GP-FORK  
17. 385-4589 CI [2] HOSE AS  
18. 2P-1293 [4] LOCKNUT (1-3/16-12-THD)  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 3D-2824 [4] SEAL-O-RING  
21. 6V-8983 [4] ELBOW  
22. 6V-9007 [4] ELBOW  
23. 6V-9160 [2] TEE-FACE SEAL  
24. 6V-9746 [18] SEAL-O-RING  
25. 6V-9832 [2] CAP (ORFS)  
26. 7G-3832 [1] GROMMET  
27. 7G-3833 [1] CLIP (TAB)  
28. 7G-3834 [1] CLIP (SLOT)  
29. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
30. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
31. 159-8035 C [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
32. 159-8036 C [1] FILM-WARNING (READ OMM)  
33. 253-3431 C [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810014
 

352-7339: FORK GP-LOG

352-7339 FORK GP-LOG -HOOK-ON
Type 3
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i05241568 SEBP3081
3527339 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 380-5294 CY [1] LINES GP-CONNECTING  
3. 8G-6122 [2] SPACER (23X40X19-MM THK)  
5. 385-2585 Y [1] FRAME GP-FORK (HOOK ON)  
6. 385-1430 [1] CLAMP AS  
6A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
6B. 7K-9209 [4] SEAL-LIP TYPE  
6C. 361-4648 [2] BUSHING  
7. 353-7024 [2] PIN AS  
8. 385-3395 [2] PIN AS  
9. 385-5357 [2] PIN AS  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 380-1052 I [2] HOSE AS  
12. 385-6718 I [1] HOSE AS  
13. 385-6719 I [1] HOSE AS  
14. 385-6720 I [1] HOSE AS  
15. 385-6721 I [1] HOSE AS  
16. 385-4585 Y [2] CYLINDER GP-FORK  
17. 385-4589 I [2] HOSE AS  
18. 2P-1293 [4] LOCKNUT (1-3/16-12-THD)  
19. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
20. 3D-2824 [4] SEAL-O-RING  
21. 6V-8983 [4] ELBOW  
22. 6V-9007 [4] ELBOW  
23. 6V-9160 [2] TEE-FACE SEAL  
24. 6V-9746 [18] SEAL-O-RING  
26. 7G-3832 [1] GROMMET  
27. 7G-3833 [1] CLIP (TAB)  
28. 7G-3834 [1] CLIP (SLOT)  
29. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
30. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
31. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
32. 159-8036 [1] FILM-WARNING (READ OMM)  
33. 253-3431 [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810015
 

361-3084: FORK GP-LOG

361-3084 FORK GP-LOG -HOOK-ON
Type 1
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i04788631 SEBP3081
3613084 FORK GP-LOG Parts scheme 3613084 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [6] SPACER-SPECIAL  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6W-2889 [4] FITTING AS (QUICK DISCONNECT, FEMALE)  
    (EACH INCLUDES)
  9C-6250 [1] SEAL-O-RING  
  9C-6251 [1] SEAL-O-RING  
4. 6W-2891 [4] PLUG AS  
5. 8G-6122 [2] SPACER (23X40X19-MM THK)  
6. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
8. 159-8036 [1] FILM-WARNING (READ OMM)  
9. 177-3005 [4] ADAPTER AS  
    (EACH INCLUDES)
  6V-9746 [1] SEAL-O-RING  
  163-3343 [1] SEAL  
10. 253-3431 [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
11. 353-7026 [2] PIN AS  
12. 353-7027 [3] PIN AS  
13. 353-8637 I [2] HOSE AS  
14. 361-4301 Y [3] CYLINDER GP-FORK  
15. 361-5580 I [2] HOSE AS  
16. 363-2654 Y [1] FRAME GP-FORK  
17. 363-2655 [1] KICKER AS-LOG  
17A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17B. 7J-9709 [2] BUSHING  
18. 363-2876 [2] PIN AS  
19. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
20. 363-4350 [1] PIN AS  
21. 363-5002 [1] CLAMP AS  
21A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
21B. 7K-9209 [4] SEAL-LIP TYPE  
21C. 361-4648 [2] BUSHING  
22. 363-6942 I [1] HOSE AS  
23. 363-6944 I [1] HOSE AS  
24. 363-6945 I [1] HOSE AS  
25. 363-6946 I [1] HOSE AS  
26. 363-6947 I [1] HOSE AS  
27. 363-6948 I [1] HOSE AS  
28. 363-6949 I [1] HOSE AS  
29. 363-6950 I [1] HOSE AS  
30. 363-6951 I [1] HOSE AS  
31. 2P-1293 [5] LOCKNUT (1-3/16-12-THD)  
32. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
33. 3D-2824 [6] SEAL-O-RING  
34. 6V-8983 [5] ELBOW  
35. 6V-9007 [6] ELBOW  
36. 6V-9160 [2] TEE-FACE SEAL  
37. 6V-9746 [22] SEAL-O-RING  
38. 7G-3832 [1] GROMMET  
39. 7G-3833 [1] CLIP (TAB)  
40. 7G-3834 [1] CLIP (SLOT)  
41. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810016
 

361-3084: FORK GP-LOG

361-3084 FORK GP-LOG -HOOK-ON
Type 2
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i04822427 SEBP3081
3613084 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [6] SPACER-SPECIAL  
2. 8G-6122 [2] SPACER (23X40X19-MM THK)  
3. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 253-3431 [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
7. 353-8641 I [1] HOSE AS  
8. 363-2876 [2] PIN AS  
9. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
10. 380-1052 I [2] HOSE AS  
11. 380-3837 Y [1] LINES GP-CONNECTING  
12. 385-1429 Y [1] FRAME GP-FORK  
13. 385-1430 [1] CLAMP AS  
13A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
13B. 7K-9209 [4] SEAL-LIP TYPE  
13C. 361-4648 [2] BUSHING  
14. 385-1523 [1] KICKER AS-LOG  
14A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
14B. 7J-9709 [2] BUSHING  
15. 385-3395 [3] PIN AS  
16. 385-4585 Y [3] CYLINDER GP-FORK  
17. 385-4586 I [1] HOSE AS  
18. 385-4587 I [1] HOSE AS  
19. 385-4588 I [1] HOSE AS  
20. 385-4589 I [2] HOSE AS  
21. 385-4590 I [1] HOSE AS  
22. 385-5357 [3] PIN AS  
23. 2P-1293 C [5] LOCKNUT (1-3/16-12-THD)  
24. 312-5694 C [1] SETSCREW (1/4-20X0.25-IN)  
25. 3D-2824 [6] SEAL-O-RING  
26. 6V-8983 [5] ELBOW  
27. 6V-9007 [6] ELBOW  
28. 6V-9160 [2] TEE-FACE SEAL  
29. 6V-9746 [22] SEAL-O-RING  
30. 7G-3832 [1] GROMMET  
31. 7G-3833 [1] CLIP (TAB)  
32. 7G-3834 [1] CLIP (SLOT)  
33. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810017
 

374-7148: FORK GP-LOG

374-7148 FORK GP-LOG -PIN-ON
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGMENT
i04748369 SEBP3081
3747148 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
3. 8G-6122 [2] SPACER (23X40X19-MM THK)  
5. 153-3742 [2] TIP-WEAR  
6. 153-3743 [4] PIN-RETAINER  
7. 153-3744 [4] RING-RETAINING  
8. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
9. 159-8036 [1] FILM-WARNING (READ OMM)  
10. 203-2208 Y [2] CYLINDER GP-FORK  
11. 253-3431 [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
12. 374-0875 [2] PIN AS  
13. 374-0876 [2] PIN AS  
14. 374-0877 [2] PIN AS  
15. 374-7149 Y [1] FRAME GP-FORK  
16. 374-7150 [1] CLAMP AS  
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  7K-9209 [4] SEAL-LIP TYPE  
  374-1562 [2] BUSHING  
17. [2] PLATE-STOP  
18. [2] PLATE-STOP  
19. 376-3449 I [1] HOSE AS  
20. 376-3452 I [1] HOSE AS  
21. 376-3454 I [1] HOSE AS  
22. 376-3455 I [1] HOSE AS  
23. 376-3456 I [2] HOSE AS  
25. 3D-2824 [4] SEAL-O-RING  
26. 3E-7443 [2] TEE-UNION  
27. 5K-9090 [4] SEAL-O-RING  
28. 5P-7468 [2] CLIP (SLOT)  
29. 5P-7469 [2] CLIP (TAB)  
30. 5P-8444 [2] GROMMET (37-MM ID)  
31. 6V-9004 [4] ELBOW  
32. 6V-9746 [8] SEAL-O-RING  
33. 6V-9854 [2] ELBOW (SWIVEL)  
34. 7G-3832 [3] GROMMET  
35. 7G-3833 [3] CLIP (TAB)  
36. 7G-3834 [3] CLIP (SLOT)  
37. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
38. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
39. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
40. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
41. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-4244 M [2] NUT (M12X1.75-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810018
 

377-0722: FORK GP-LOG

377-0722 FORK GP-LOG -HOOK-ON
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i04791119 SEBP3081
3770722 FORK GP-LOG Parts scheme 3770722 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 8G-6122 [2] SPACER (23X40X19-MM THK)  
3. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
4. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
5. 159-8036 [1] FILM-WARNING (READ OMM)  
6. 253-3431 [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
7. 353-7024 [2] PIN AS  
8. 353-7026 [2] PIN AS  
9. 353-7027 [2] PIN AS  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 377-0723 Y [1] FRAME GP-FORK  
12. 377-0724 [1] CLAMP AS  
12A. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
12B. 7K-9209 [4] SEAL-LIP TYPE  
12C. 361-4648 [2] BUSHING  
13. 378-2656 Y [1] LINES GP-CONNECTING  
14. 379-0078 I [2] HOSE AS  
15. 379-0081 I [2] HOSE AS  
16. 379-0082 I [1] HOSE AS  
17. 379-0083 I [1] HOSE AS  
18. 379-0084 I [1] HOSE AS  
19. 379-0085 I [1] HOSE AS  
20. 387-8656 Y [2] CYLINDER GP-FORK  
21. 2P-1293 [4] LOCKNUT (1-3/16-12-THD)  
22. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
23. 3D-2824 [4] SEAL-O-RING  
24. 6V-8983 [4] ELBOW  
25. 6V-9007 [4] ELBOW  
26. 6V-9160 [2] TEE-FACE SEAL  
27. 6V-9746 [18] SEAL-O-RING  
28. 7G-3832 [1] GROMMET  
29. 7G-3833 [1] CLIP (TAB)  
30. 7G-3834 [1] CLIP (SLOT)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30810019
 

379-5408: FORK GP-LOG

379-5408 FORK GP-LOG -PIN-ON
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i04792103 SEBP3081
3795408 FORK GP-LOG Parts scheme 3795408 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your FORK-LOG AND LUMBER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
3. 8G-6122 [2] SPACER (23X40X19-MM THK)  
4. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 153-3742 [2] TIP-WEAR  
6. 153-3743 [4] PIN-RETAINER  
7. 153-3744 [4] RING-RETAINING  
8. 159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
9. 159-8036 [1] FILM-WARNING (READ OMM)  
10. 203-2208 Y [2] CYLINDER GP-FORK  
11. 253-3431 [2] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
12. 374-0875 [2] PIN AS  
13. 374-0876 [2] PIN AS  
14. 374-0877 [2] PIN AS  
15. 376-3456 I [2] HOSE AS  
16. Y [1] FRAME GP-FORK  
17. 379-8908 [2] CLAMP AS  
    (EACH INCLUDES)
17A. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
17B. 7K-9209 [2] SEAL-LIP TYPE  
17C. 374-1562 [1] BUSHING  
18. 380-1051 I [1] HOSE AS  
19. 380-1052 I [1] HOSE AS  
20. 380-1053 I [1] HOSE AS  
21. 380-1054 I [1] HOSE AS  
22. 8T-4244 M [2] NUT (M12X1.75-THD)  
23. 3D-2824 [4] SEAL-O-RING  
24. 3E-7443 [2] TEE-UNION  
25. 5K-9090 [4] SEAL-O-RING  
26. 5P-7468 [2] CLIP (SLOT)  
27. 5P-7469 [2] CLIP (TAB)  
28. 5P-8444 [2] GROMMET (37-MM ID)  
29. 6V-9004 [2] ELBOW  
30. 6V-9007 [2] ELBOW  
31. 6V-9746 [8] SEAL-O-RING  
32. 6V-9854 [2] ELBOW (SWIVEL)  
33. 7G-3832 [3] GROMMET  
34. 7G-3833 [3] CLIP (TAB)  
35. 7G-3834 [3] CLIP (SLOT)  
36. 7X-2562 M [2] BOLT (M20X2.5X45-MM)  
37. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
38. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
39. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Log Fork - Lubricate
Fork (Log and Lumber)
Rated Load
Fork (Log and Lumber)
Special Instruction
Procedure to Reinforce the Frame and the Top Clamp on 988G Logging Forks{6114, 7000}
Procedure to Reinforce the Frame and the Top Clamp on 988G Logging Forks{6114, 7000}
Improvements on the Hydraulic Cylinder for the Log Fork{5807}
Improvements on the Hydraulic Cylinder for the Log Fork{5807}
Procedure to Modify the Clamp Assembly on Certain 988G Logging Forks{6114}
Procedure to Modify the Clamp Assembly on Certain 988G Logging Forks{6114}
Technical Information Bulletin
Repair Procedure for Frame Gussets On 988G Log and Lumber Forks{6114, 7000}
Repair Procedure for Frame Gussets On 988G Log and Lumber Forks{6114, 7000}
Service Magazine
An Improved Cylinder for the Log Fork Is Available for the 988G and the 988H Wheel Loader {5807, 6114}
2010/04/02

Caterpillar Parts SIS Catalog :

FORK GP-LOG
190-3982 FORK GP-LOG
FORK GP-LOG
190-3982 FORK GP-LOG
FORK GP-LOG
163-0194 FORK GP-LOG
FORK GP-LOG
163-0194 FORK GP-LOG
FORK GP-LOG
157-3467 FORK GP-LOG
FORK GP-LOG
157-3466 FORK GP-LOG
FORK GP-LOG
157-3466 FORK GP-LOG
154-8708 FORK AR-LOG & LUMBER
FORK GP-LOG
192-7656 FORK GP-LOG
FORK GP-LOG
352-7339 FORK GP-LOG
FORK GP-LOG
352-7339 FORK GP-LOG
FORK GP-LOG
352-7339 FORK GP-LOG
FORK GP-LOG
361-3084 FORK GP-LOG
FORK GP-LOG
361-3084 FORK GP-LOG
FORK GP-LOG
374-7148 FORK GP-LOG
FORK GP-LOG
377-0722 FORK GP-LOG

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.