171-1103 WIRING GP-ENGINE S/N 3PD1492-99999 PART OF 191-6195 ENGINE AR Type 1 TK1051 TRACK FELLER BUNCHER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 171-1103 WIRING GP-
1. 171-1103 WIRING GP-
2. 171-1103 WIRING GP-
3. 117-2760 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

4. 165-6180 DRIVE AR-F
5. 165-6181 DRIVE GP-F
6. 165-6209 DRIVE GP-F

SPROCKET GP

7. 7Y-0763 SPROCKET G

FRAME AND BODY

BOX GP

8. 152-1747 BOX & MTG
9. 187-1534 BOX GP-STO
0. INFORMATION

TRACK FELLER BUNCHER TK1051 TRACK FELLER BUNCHER 9HZ
TK1051 TRACK FELLER BUNCHER 9HZ00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3094 TK1051 9HZ (1998)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

178-3020 WIRING GP-ELECTRONIC CONTROL

199-7739 WIRING GP-ELECTRONIC CONTROL

171-1103 WIRING GP-ENGINE

117-2760 WIRING GP-UNIT INJECTOR

#SEBP30940160

171-1103: WIRING GP-ENGINE

WIRING GP-ENGINE

171-1103 WIRING GP-ENGINE
S/N 3PD1492-99999
PART OF 191-6195 ENGINE AR
Type 1

i01735359 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-7077	[1]	SPACER (0.406X0.62X0.37-IN THK)
2.	3E-7448	[1]	CONNECTOR
3.	3S-2093 C	[6]	STRAP-CABLE
4.	9X-0262	[1]	ADAPTER
5.	161-1705 C	[1]	SENSOR AS-PRESSURE (ENGINE OIL)
6.	222-4086	[1]	HARNESS AS (ENGINE ELECTRONIC)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	3S-2093	[2]	STRAP-CABLE
7.	197-8391 CY	[1]	SENSOR GP-TEMPERATURE (INLET MANIFOLD)
8.	197-8392 CY	[1]	SENSOR GP-TEMPERATURE (WATER COOLANT)
9.	197-8393 CY	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
10.	197-8394 CY	[1]	SENSOR GP-PRESSURE (FUEL)
11.	197-8395 CY	[1]	SENSOR GP-PRESSURE (INLET MANIFOLD)
12.	197-8396 CY	[1]	SENSOR GP-SPEED (CRANKSHAFT)
13.	197-8397 CY	[1]	SENSOR GP-SPEED (CAMSHAFT)
14.	4P-5918	[1]	CLIP
15.	132-5789	[1]	CLIP (LADDER)
16.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)(AIR INLET HEATER)
17.	3E-4353 C	[2]	WASHER-HARD (11X25X3-MM THK)
18.	4K-8864 C	[3]	CLIP (LOOP)
19.	4P-8134	[3]	CLIP (LADDER)
20.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
21.	6V-5048 C	[1]	SEAL-O-RING
22.	6V-5049 C	[1]	SEAL-O-RING
23.	6V-5215 M	[2]	BOLT (M8X1.25X16-MM)
24.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
25.	6V-6317 CM	[2]	BOLT (M10X1.5X20-MM)
26.	6V-7981 M	[1]	BOLT (M10X1.5X70-MM)
27.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
28.	6V-8837 M	[1]	BOLT (M6X1X16-MM)
29.	8J-1256	[1]	CLIP (LOOP)
30.	8M-2770 C	[4]	CLIP (LOOP)
31.	8M-2771	[1]	CLIP
32.	8T-0642 M	[1]	BOLT (M8X1.25X14-MM)
33.	8T-8737	[2]	PLUG-SEAL
34.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
35.	9S-4191	[1]	PLUG (9/16-18-THD)
36.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
37.	197-8391 CY	[1]	SENSOR GP-TEMPERATURE (FUEL)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30940161

171-1103: WIRING GP-ENGINE

WIRING GP-ENGINE

171-1103 WIRING GP-ENGINE
S/N 3PD1492-99999
PART OF 191-6195 ENGINE AR
Type 2

i01917632 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-7077	[1]	SPACER (0.406X0.62X0.37-IN THK)
2.	3E-7448	[1]	CONNECTOR
3.	3S-2093 C	[5]	STRAP-CABLE
4.	4P-5918	[1]	CLIP
5.	9X-0262	[1]	ADAPTER
6.	197-8391 CY	[1]	SENSOR GP-TEMPERATURE (INLET MANIFOLD)
7.	197-8392 CY	[1]	SENSOR GP-TEMPERATURE (COOLANT)
8.	197-8393 CY	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
9.	197-8394 CY	[1]	SENSOR GP-PRESSURE (FUEL)
10.	197-8395 CY	[1]	SENSOR GP-PRESSURE (INLET MANIFOLD)
11.	197-8396 CY	[1]	SENSOR GP-SPEED (CRANKSHAFT)
12.	197-8397 CY	[1]	SENSOR GP-SPEED (CAMSHAFT)
13.	164-9609	[1]	ELBOW
14.	222-4086	[1]	HARNESS AS (ENGINE ELECTRONIC)
	126-1774	[1]	COVER-CONNECTOR (MODULE CONNECTOR)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)(ENGINE ELECTRONIC HARNESS)
			(INCLUDES PLUG AS & WEDGE)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)(ENGINE ELECTRONIC HARNESS)
			(INCLUDES PLUG AS & WEDGE)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)(ENGINE ELECTRONIC HARNESS)
			(INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)(ENGINE ELECTRONIC HARNESS)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)(ENGINE ELECTRONIC HARNESS)
			(INCLUDES RECEPTACLE AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	3S-2093	[2]	STRAP-CABLE (MODULE CONNECTOR)
15.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)(AIR INLET HEATER)
16.	3E-4353 C	[1]	WASHER-HARD (11X25X3-MM THK)
17.	4D-7794	[1]	CLIP
18.	4K-8864 C	[2]	CLIP (LOOP)
19.	4P-8134	[3]	CLIP (LADDER)
20.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
21.	6V-5048 C	[2]	SEAL-O-RING
22.	6V-5049 C	[1]	SEAL-O-RING
23.	6V-5215 M	[2]	BOLT (M8X1.25X16-MM)
24.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
25.	6V-6317 CM	[1]	BOLT (M10X1.5X20-MM)
26.	6V-7981 M	[1]	BOLT (M10X1.5X70-MM)
27.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
28.	6V-8837 M	[1]	BOLT (M6X1X16-MM)
29.	8J-1256	[1]	CLIP (LOOP)
30.	8M-2770 C	[4]	CLIP (LOOP)
31.	8M-2771	[1]	CLIP
32.	8T-0642 M	[1]	BOLT (M8X1.25X14-MM)
33.	8T-8737	[2]	PLUG-SEAL
34.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
35.	9S-4191	[1]	PLUG (9/16-18-THD)
36.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
37.	197-8391 CY	[1]	SENSOR GP-TEMPERATURE (FUEL)
38.	197-8394 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30940162

171-1103: WIRING GP-ENGINE

WIRING GP-ENGINE

171-1103 WIRING GP-ENGINE
S/N 3PD1492-99999
PART OF 191-6195 ENGINE AR
Type 3

i02215779 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5G-4313	[1]	SPACER (10.34X15.88X12-MM THK)
2.	3E-7448	[1]	CONNECTOR
3.	3S-2093	[4]	STRAP-CABLE
4.	4P-5918	[1]	CLIP
5.	9X-0262	[1]	ADAPTER
6.	197-8391 Y	[1]	SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD)
6A.	197-8391 Y	[1]	SENSOR GP-TEMPERATURE (FUEL)
7.	197-8392 Y	[1]	SENSOR GP-TEMPERATURE (WATER, COOLANT)
8.	197-8393 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
9.	197-8394 Y	[1]	SENSOR GP-PRESSURE (FUEL)
9A.	197-8394 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL)
10.	197-8395 Y	[1]	SENSOR GP-PRESSURE (AIR INLET MANIFOLD)
11.	197-8396 Y	[1]	SENSOR GP-SPEED (CRANKSHAFT TIMING)
12.	197-8397 Y	[1]	SENSOR GP-SPEED (CAMSHAFT TIMING)
13.	164-9609	[1]	ELBOW
14.	183-4403	[1]	CLIP (LOOP)
15.	222-4086	[1]	HARNESS AS (ENGINE ELECTRONIC)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[44]	PLUG-SEAL
	9X-1386 E		SLEEVE (25-CM)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	126-1774	[1]	COVER-CONNECTOR
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	180-9340	[61]	SOCKET-CONNECTOR (14-GA TO 18-GA)
16.	2V-3216	[1]	CLIP
17.	3E-4353	[1]	WASHER-HARD (11X25X3-MM THK)
18.	4D-7794	[1]	CLIP
19.	132-5789	[1]	CLIP (LADDER)
20.	4P-8134	[2]	CLIP (LADDER)
21.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
22.	6V-4369	[1]	CLIP
23.	6V-5048	[2]	SEAL-O-RING
24.	6V-5049	[1]	SEAL-O-RING
25.	6V-5215 M	[2]	BOLT (M8X1.25X16-MM)
26.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
27.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
28.	6V-7981 M	[1]	BOLT (M10X1.5X70-MM)
29.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
30.	6V-8837 M	[1]	BOLT (M6X1X16-MM)
31.	7K-1181	[1]	STRAP-CABLE
32.	8J-1256	[2]	CLIP (LOOP)
33.	8M-2771	[1]	CLIP
34.	8M-2773	[1]	CLIP (LOOP)
35.	8T-0642 M	[1]	BOLT (M8X1.25X14-MM)
36.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
37.	9S-4191	[1]	PLUG (9/16-18-THD)
38.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30940163

117-2760: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

117-2760 WIRING GP-UNIT INJECTOR
S/N 3PD1-99999
PART OF 191-6195 ENGINE AR

i00492735 SEBP3094

1172760 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-9537	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
	103-8133		KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	2V-3216	[4]	CLIP
3.	7X-2468	[3]	CLIP
4.	7E-6508	[6]	CAP AS
5.	6V-8214 M	[9]	BOLT (M6X1X20-MM)
6.	5P-0537	[9]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART

#SEBP30940164

165-6180: DRIVE AR-FINAL

DRIVE AR-FINAL

165-6180 DRIVE AR-FINAL
S/N 9HZ1-99999
PART OF 220-1356 UNDERCARRIAGE AR
AN ATTACHMENT

i01351662 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-0763 Y	[1]	SPROCKET GP
2.	165-6181 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP30940165

165-6181: DRIVE GP-FINAL

DRIVE GP-FINAL

165-6181 DRIVE GP-FINAL
S/N 9HZ1-99999
W/ MOTOR
PART OF 165-6180 DRIVE AR-FINAL
AN ATTACHMENT

i01351665 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	165-4074 Y	[1]	MOTOR GP-PISTON (TRAVEL)
2.	165-6209 Y	[1]	DRIVE GP-FINAL
3.	8T-5460 M	[2]	BOLT (M20X2.5X40-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP30940166

165-6209: DRIVE GP-FINAL

DRIVE GP-FINAL

165-6209 DRIVE GP-FINAL
S/N 9HZ1-99999
PART OF 165-6181 DRIVE GP-FINAL
AN ATTACHMENT

i01352331 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-0701	[1]	HOUSING-MOTOR
2.	208-0097	[1]	PLUG
3.	152-8707	[1]	COUPLER
4.	185-0751	[1]	CARRIER
5.	185-0752	[1]	PLATE
6.	7X-2910	[1]	RING-RETAINING
7.	183-3302	[1]	WASHER-COPPER (8.2X11.9X1-MM THK)
8.	174-3069	[1]	RING-RETAINING
9.	185-0780	[1]	PLUG
10.	8T-9521	[1]	SEAL-O-RING
11.	185-0753	[5]	GEAR-PLANETARY
12.	108-3222	[10]	BEARING AS-ROLLER
13.	110-6193	[10]	WASHER (80X86X2.7-MM THK)
14.	109-0118	[5]	RING-RETAINING
15.	185-0754	[1]	SEAL GP-DUO-CONE
16.	095-0928	[5]	RING-RETAINING
17.	185-0755	[1]	GEAR-SUN
18.	183-6930	[1]	RING-RETAINING
19.	185-0759 M	[1]	NUT-SHAFT (M205X2-THD)
20.	3D-9132	[1]	CONE-BEARING
21.	176-0053	[1]	BEARING AS-SPECIAL
22.	197-7471	[1]	SEAL-O-RING
23.	193-0337	[1]	SPACER
24.	185-0778	[1]	WASHER-THRUST (62X85X4.8-MM THK)
25.	185-0762	[1]	PISTON-BRAKE
26.	185-0763	[1]	PLATE
27.	8H-5352	[1]	BALL BEARING
28.	7U-3538	[1]	RING-RETAINING
29.	9X-2858	[6]	RING-RETAINING
30.	176-0051	[6]	RING-LOCATING
31.	185-0764	[1]	BRAKE GP-PARKING
32.	6V-7644	[3]	RING-RETAINING
33.	176-0055	[3]	BEARING
34.	185-0777	[3]	GEAR-PLANETARY (35-TEETH)
35.	185-0766	[1]	SEAL GP (PARKING BRAKE)
36.	185-0776	[1]	CARRIER
37.	132-9741	[1]	WASHER (HOUSING)
38.	185-0774	[1]	GEAR-SUN (17-TEETH)
39.	151-2115	[2]	WASHER-COPPER (18X22X1.5-MM THK)
40.	8U-5786	[2]	PLUG (FINAL DRIVE, OIL DRAIN, FILL)
41.	8T-8441 M	[12]	BOLT-SOCKET HEAD (M12X1.75X25-MM)
42.	109-5695	[1]	SEAL-O-RING
43.	109-6494	[1]	RING-RETAINING
44.	209-4433	[2]	DOWEL
45.	8T-4241	[3]	RING-RETAINING (EXTERNAL)
46.	109-5707	[1]	SEAL-O-RING
47.	185-0768	[1]	HOUSING
48.	9X-8480 M	[24]	BOLT (M24X3X110-MM)
49.	185-0769	[1]	GEAR-RING
50.	137-7148	[3]	BEARING-ROLLER
51.	185-0770	[1]	COVER
52.	185-0771	[1]	GEAR-SUN
53.	185-0772	[1]	CARRIER
54.	185-0773	[3]	GEAR-PLANETARY
55.	3D-9133	[1]	CUP-BEARING
	M		METRIC PART

#SEBP30940167

7Y-0763: SPROCKET GP

SPROCKET GP

7Y-0763 SPROCKET GP
S/N 9HZ1-99999
PART OF 165-6180 DRIVE AR-FINAL
AN ATTACHMENT

i00423142 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-5685	[1]	SPROCKET-TRACK
2.	7X-2575 M	[16]	BOLT (M24X3X60-MM)
	M		METRIC PART

#SEBP30940168

152-1747: BOX & MTG GP-STORAGE

BOX & MTG GP-STORAGE

152-1747 BOX & MTG GP-STORAGE
S/N 9HZ1-99999
PART OF 152-1687 CHASSIS AR

i01493992 SEBP3094

1521747 BOX & MTG GP-STORAGE Parts scheme

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8502	[1]	PADLOCK GP
	5P-8500	[1]	KEY
	8Y-6364	[1]	SLEEVE
2.	122-4026	[6]	SPACER (13X25X25-MM THK)
3.	187-1534 Y	[1]	BOX GP-STORAGE
4.	162-8284 M	[6]	BOLT (M12X1.75X60-MM)
5.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30940169

187-1534: BOX GP-STORAGE

BOX GP-STORAGE

187-1534 BOX GP-STORAGE
S/N 9HZ1-99999
PART OF 152-1747 BOX & MTG GP-STORAGE

i01494129 SEBP3094

For full view, you need register

Parts for your TK1051 TRACK FELLER BUNCHER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-8850	[1]	SPRING
2.	1R-9958	[1]	LATCH AS
3.	4I-0118	[1]	HOOK AS
4.	5V-3854	[2]	BUMPER
5.	9M-3835	[1]	LATCH-RUBBER
6.	096-4129	[1]	CUSHION
7.	116-1795	[1]	SPRING
8.	122-3882	[2]	SPRING
9.	187-1535	[1]	BOX AS
	4K-8501	[1]	CLIP
	6S-9470	[1]	PLATE
	7T-1099	[1]	LINK
	9R-5271 M	[4]	BOSS (M10X1.5X25-MM)
10.	187-1536	[1]	COVER AS
	8T-3597 M	[3]	NUT-WELD (M12X1.75-THD)
	109-0903	[2]	HINGE
11.	192-9033	[1]	SUPPORT AS
	4B-4278	[1]	WASHER (10.2X20.5X1.6-MM THK)
12.	192-9193	[1]	SHEET AS
13.	192-9194	[1]	DOOR AS
	3D-9143	[2]	HINGE-BUTT
	8T-5413 M	[4]	STUD-WELD (M10X1.5X25-MM)
14.	192-9195	[1]	DOOR AS
	4K-8501	[1]	CLIP
	5R-5597	[1]	BRACKET
	6S-9470	[1]	PLATE
	9V-3659	[1]	HINGE
15.	192-9801	[1]	SHEET
16.	192-9802	[1]	SHEET
17.	194-4468	[1]	ANGLE AS
18.	194-4745	[1]	ROD AS
19.	095-0843	[3]	PIN-COTTER
20.	095-1314	[1]	PIN-CLEVIS
21.	2M-5795	[1]	PIN-CLEVIS
22.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
24.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 M	[4]	NUT (M10X1.5-THD)
26.	8T-4139 M	[17]	BOLT (M12X1.75X30-MM)
27.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
28.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
29.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
30.	8T-4223	[17]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
32.	8T-6693 M	[2]	SCREW-MACHINE (M5X0.8X16-MM)
33.	6P-4467	[2]	GROMMET
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines

CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21