AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-8520 CONTROL AR-FAN -AUTOMATIC REVERSING S/N AWH1-UP CUSTOM 980G II WHEEL LOADER


HYDRAULIC SYSTEM
CONTROL GP-FAN
CYLINDER GP
CONTROL GP-RIDE
CYLINDER GP

WHEEL LOADER 980G II WHEEL LOADER AWH
 980G II Wheel Loader AWH00001-UP (MACHINE) POWERED BY 3406 Engine SEBP3095 980G II AWH   (1999)

HYDRAULIC SYSTEM

CONTROL GP-FAN
2Q-8520 CONTROL AR-FAN
CONTROL AR-FAN
2Q-8562 CONTROL AR-FAN
 

#SEBP30950620
 

2Q-8520: CONTROL AR-FAN

2Q-8520 CONTROL AR-FAN -AUTOMATIC REVERSING
S/N AWH1-UP
CUSTOM
i02810014 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    FOR SERVICE INFORMATION SEE 2Q-8562 CONTROL AR-FAN
 

#SEBP30950621
 

2Q-8562: CONTROL AR-FAN

2Q-8562 CONTROL AR-FAN -CUSTOM
S/N AWH1-UP
KIT, AUTO REVERSING
i01810153 SEBP3095
2Q8562 CONTROL AR-FAN Parts scheme 2Q8562 CONTROL AR-FAN Parts scheme 2Q8562 CONTROL AR-FAN Parts scheme 2Q8562 CONTROL AR-FAN Parts scheme 2Q8562 CONTROL AR-FAN Parts scheme 2Q8562 CONTROL AR-FAN Parts scheme 2Q8562 CONTROL AR-FAN Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-2062 J [1] PIN  
2. 5P-0372 J [2] LOCK PIN  
3. 6W-5817 J [1] SPRING  
4. 6W-5818 J [1] LATCH  
5. 8T-4766 J [1] ROD END  
6. 9V-0344 J [1] PIN (LATCH STRIKER)  
7. 189-8086 J [1] GRILL AS  
  189-8093 [3] HINGE AS  
  189-8124 [1] HANDLE AS  
  8G-0871 [1] HANDLE  
  9V-0334 [1] ANGLE  
  9V-0453 [1] BUSHING-TERMINAL  
8. 189-8121 J [1] BRACKET AS  
9. 189-8129 J [1] BLOCK  
10. 189-8132 J [1] PLATE AS  
11. 096-3781 J [1] PIN-CLEVIS  
12. 131-5879 J [3] WASHER (11X32X3-MM THK)  
13. 6W-2523 J [1] PIN  
14. 7X-7729 J [9] WASHER (11X25X3-MM THK)  
15. 8T-4121 J [1] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 JM [3] NUT (M10X1.5-THD)  
17. 8T-4136 JM [1] BOLT (M10X1.5X25-MM)  
18. 8T-4186 JM [2] BOLT (M10X1.5X40-MM)  
19. 8T-4196 JM [6] BOLT (M10X1.5X35-MM)  
20. 5P-7211 DJ SEAL (.1-M)  
21. 5P-7483 DJ SEAL (4.2-M)  
22. 0S-1594 L [4] BOLT (3/8-16X1-IN)  
23. 5M-2894 L [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 7N-7628 L [2] GASKET  
25. 7N-7878 L [2] PLATE-COVER  
26. 4N-2040 N [1] ELBOW-DRAIN  
27. 7N-7559 N [1] GASKET  
28. 312-7982 N [1] HOSE AS  
29. 217-2611 N [1] TUBE AS  
30. 0S-1571 N [3] BOLT (3/8-16X1.75-IN)  
31. 0S-1619 N [1] BOLT (3/8-16X3-IN)  
32. 114-2687 N [1] SEAL-O-RING  
33. 136-7226 N [1] SEAL-O-RING  
34. 5S-7383 N [2] BOLT (3/8-16X1.75-IN)  
35. 4N-0699 N [1] GASKET  
36. 5M-2894 N [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 7N-8875 N [1] GASKET  
38. 153-6256 N [1] ELBOW AS  
  8C-7563 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
39. 7N-7628 O [2] GASKET  
40. 8N-0788 O [1] COVER  
41. 127-0724 O [1] SPACER (10.5X16X20-MM THK)  
42. 217-2612 O [1] TUBE AS  
43. 217-2710 O [1] HOSE AS  
44. 0S-1591 O [1] BOLT (3/8-16X1.5-IN)  
45. 0S-1594 O [4] BOLT (3/8-16X1-IN)  
46. 1B-3057 O [1] CLIP  
47. 211-5237 O [1] CONNECTOR  
48. 3S-4661 O [1] CLIP  
49. 4B-9302 O [2] CLIP (LOOP)  
50. 5M-2894 O [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
51. 6V-8398 O [3] SEAL-O-RING  
51A. 3K-0360 [1] SEAL-O-RING  
    (PART OF STANDARD LINES GP-WATER. REQUIRED FOR ACERT ENGINES ONLY.)
52. 8C-6871 O [1] CONNECTOR  
53. 8C-6872 O [1] CONNECTOR  
53A. 6V-8639 [1] CONNECTOR  
    (PART OF STANDARD LINES GP-WATER. REQUIRED FOR ACERT ENGINES ONLY.)
54. 8T-4121 O [2] WASHER-HARD (11X21X2.5-MM THK)  
55. 8T-4133 OM [1] NUT (M10X1.5-THD)  
56. 8T-4136 OM [1] BOLT (M10X1.5X25-MM)  
57. 1S-4295 W [1] GASKET (TURBOCHARGER)  
58. 2N-2765 W [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
59. 2N-2766 W [4] LOCKNUT (3/8-16-THD)  
60. 174-1471 WY [1] TURBOCHARGER GP  
61. 8C-8498 P [1] CONNECTOR-HYDRAULIC  
62. 183-4077 PY [1] MOTOR GP-PISTON (HYDRAULIC FAN,AUTO REVERSING)  
63. 185-3146 P [1] BRACKET  
64. 188-9883 P [1] ELBOW  
65. 189-8142 P [1] HARNESS AS-SOLENOID (AUTOMATIC REVERSING FAN)  
  155-2269 [2] PLUG AS-CONNECTOR (2-PIN)  
66. 189-8143 P [1] STRIP  
67. 189-8334 PI [1] HOSE AS  
68. 189-8336 P [1] HARNESS AS-CAB (AUTOMATIC REVERSING FAN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  8T-8737 [2] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
69. 189-8428 PI [1] HOSE AS  
70. 189-8429 PI [1] HOSE AS  
71. 189-8430 PI [1] HOSE AS  
72. 213-1040 PY [1] VALVE GP-FAN REVERSING  
73. 092-7385 P [1] CLIP  
74. 130-5300 P [2] CLIP  
75. 150-3057 P [1] TEE AS  
  5K-9090 [3] SEAL-O-RING  
76. 219-9534 P [1] SWITCH AS-ROCKER (24-VOLT)(REVERSING FAN)  
77. 3D-2824 P [6] SEAL-O-RING  
78. 5K-9090 P [1] SEAL-O-RING  
79. 5P-1076 P [3] WASHER-HARD (13.5X30X4-MM THK)  
80. 6V-1889 P [5] CLIP (LOOP)  
81. 6V-8398 P [1] SEAL-O-RING  
82. 6V-8557 P [1] NUT-FACE SEAL (1-7/16-12-THD)  
83. 6V-8637 P [3] CONNECTOR  
84. 6V-8714 P [1] CONNECTOR  
85. 6V-8944 P [1] REDUCER  
86. 6V-8946 P [1] REDUCER  
87. 6V-9746 P [7] SEAL-O-RING  
88. 6V-9853 P [2] ELBOW  
89. 7X-7729 P [2] WASHER (11X25X3-MM THK)  
90. 8T-4121 P [2] WASHER-HARD (11X21X2.5-MM THK)  
91. 8T-4133 PM [1] NUT (M10X1.5-THD)  
92. 8T-4136 PM [2] BOLT (M10X1.5X25-MM)  
93. 8T-4137 PM [1] BOLT (M10X1.5X20-MM)  
94. 8T-4139 PM [3] BOLT (M12X1.75X30-MM)  
95. 8T-4191 PM [1] BOLT (M10X1.5X16-MM)  
96. 6V-0292 Q [1] PLUG  
97. 121-7885 Q [1] PLATE AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
98. 159-8329 Q [1] BRACKET AS  
  [1] PLATE  
99. 189-8084 Q [1] DOOR AS  
  110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
100. 189-8085 Q [1] SUPPORT AS  
101. 198-1531 Q [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
102. 7D-7233 Q [1] CLIP (LOOP)  
103. 7X-0632 Q [4] WASHER-HARD (11X36X6-MM THK)  
104. 8T-4121 Q [5] WASHER-HARD (11X21X2.5-MM THK)  
105. 8T-4133 QM [4] NUT (M10X1.5-THD)  
106. 8T-4137 QM [5] BOLT (M10X1.5X20-MM)  
107. 8T-4200 QM [4] BOLT (M8X1.25X16-MM)  
108. 8T-4224 Q [4] WASHER-HARD (8.8X16X2-MM THK)  
109. S [1] PLATE  
110. 8T-4967 SM [3] STUD-WELD (M10X1.5X23-MM)  
   
  189-8149 F [1] SHIELD GP-HEAT  
  189-8150 [1] COVER-MUFFLER  
  189-8151 [1] COVER-TURBOCHARGER  
  189-8152 [1] COVER-MANIFOLD (REAR)  
  189-8153 [1] COVER-MANIFOLD (FRONT)  
    (REQUIRED FOR COVERING EXHAUST COMPONENTS)
   
  189-7955 FI [1] HOSE AS  
    (HOSE AS IS TO BE USED INSTEAD OF 189-8334 HOSE AS ON MACHINES WITH SERIAL NO AWH00001 TO AWH00606 DUE TO THREAD SIZE)
   
  052-0726 F [1] TEE  
    (TEE IS TO BE ADDED TO LINES GP-HEATER)
   
  7D-4092 F [1] CLIP  
  130-5300 F [1] CLIP  
  189-8419 FI [1] HOSE AS  
    (ABOVE COMPONENTS REQUIRED WHEN ORDERED WITH AN EXISING AXLE OIL COOLER ATTACHMENT. REFER TO REHS1233 FOR INSTALLATION)
   
    *****STANDARD REMOVAL*****
  1H-3338 FT [8] LOCKWASHER  
  3E-8020 FTM [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
  5P-0372 FT [1] LOCK PIN  
  6V-7636 FT [2] PIN AS-SPRING  
  6V-8073 FT [1] LINK-CONNECTING  
  7X-7729 FT [1] WASHER (11X25X3-MM THK)  
  8T-4121 FT [7] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4136 FTM [1] BOLT (M10X1.5X25-MM)  
  8T-4195 FTM [6] BOLT (M10X1.5X30-MM)  
  8T-4766 FT [1] ROD END  
  9K-4939 FT [1] BUMPER-STEM  
  9X-2040 FTM [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
  9X-2044 FTM [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
  096-3781 FT [1] PIN-CLEVIS  
  173-9681 FT [1] GRILL AS  
  174-3086 FT [1] PIN AS  
  179-7211 FT [1] HOOD & GUARD GP  
  176-2468 FT [1] HANDLE AS-PANEL  
  177-0333 FT [1] LATCH AS  
  185-9787 FT [1] BRACKET AS  
   
  173-0522 F [1] LINES GP-HYDRAULIC OIL COOLER  
  228-3657 FI [1] HOSE AS  
  228-3658 FI [1] HOSE AS  
    (REMOVE ABOVE COMPONENTS FROM LINES GP-OIL. OLDER MACHINES REMOVE 212-7239 & 223-0531.
    NEWER MACHINES REMOVE 228-3658 & 228-3657.)
   
  161-8919 FX [1] MOTOR GP-PISTON  
  171-3035 FX [1] RADIATOR & FAN GP  
  175-4203 FU [1] SHIELD GP-ENGINE COMPARTMENT  
  0S-1571 FH [1] BOLT (3/8-16X1.75-IN)  
  0S-1588 FH [2] BOLT (3/8-16X1.25-IN)  
  0S-1619 FH [1] BOLT (3/8-16X3-IN)  
  1A-2029 FH [2] BOLT (3/8-16X1.125-IN)  
  4N-0699 FH [1] GASKET  
  5M-2894 FH [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  8C-6873 FH [1] CONNECTOR  
  114-2687 FH [1] SEAL-O-RING  
  126-2702 FH [1] SEAL-INTEGRAL  
  136-7226 FH [1] SEAL-O-RING  
  173-9179 FH [1] LINES GP-TURBOCHARGER OIL  
  173-9182 FH [1] TUBE AS-OIL DRAIN  
  196-0186 FH [1] TUBE AS-OIL SUPPLY  
  198-6068 FH [1] SEAL-INTEGRAL  
  1S-4295 FW [1] GASKET (TURBOCHARGER)  
  2N-2765 FW [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  2N-2766 FW [4] LOCKNUT (3/8-16-THD)  
  148-9102 FW [1] TURBOCHARGER GP  
  8T-4121 FV [4] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4133 FVM [2] NUT (M10X1.5-THD)  
  8T-4136 FVM [2] BOLT (M10X1.5X25-MM)  
  162-8352 FV [1] U-BOLT  
  205-8113 FV [1] BRACKET AS  
  206-3143 FVI [1] HOSE AS  
   
  7X-7729 F [2] WASHER (11X25X3-MM THK)  
  8T-4121 F [1] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4137 FM [2] BOLT (M10X1.5X20-MM)  
  8T-4185 FM [1] BOLT (M10X1.5X50-MM)  
  9R-6307 F [1] SPACER (11X28X12-MM THK)  
  136-2803 F [1] CLIP  
  194-4722 F [1] TUBE AS  
  194-4724 F [1] TUBE AS  
    (REMOVE ABOVE COMPONENTS FROM LINES GP-OIL, OLDER MACHINES ONLY)
   
    THIS AR PROVIDES A AUTO-REVERSING FAN SYSTEM FOR THE 980G II WHEEL LOADER
  D   ORDER BY THE METER
  F   NOT SHOWN
  H   PART OF STANDARD LINES GP-TURBOCHARGER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PART OF STANDARD GRILL GP-WASTE
  L   PART OF STANDARD COVER GP-TURBOCHARGER
  M   METRIC PART
  N   PART OF STANDARD LINES GP-TURBOCHARGER OIL
  O   PART OF STANDARD LINES GP-WATER,TURBOCHARGER
  P   PART OF STANDARD CONTROL GP-FAN,AUTOMATIC REVERSING
  Q   PART OF STANDARD PANEL GP-CONTROL
  R   REMANUFACTURED PART MAY BE AVAILABLE
  S   PART OF STANDARD PANEL GP-CONTROL
  T   PART OF STANDARD HOOD & GUARD GP
  U   PART OF STANDARD CHASSIS AR
  V   PART OF STANDARDLINES GP-AXLE OIL COOLER
  W   PART OF STANDARD TURBOCHARGER GP
  X   PART OF STANDARD RADIATOR GP
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950622
 

175-4219: CONTROL AR-HIGH LIFT

175-4219 CONTROL AR-HIGH LIFT
S/N AWH1-UP
i01287023 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  175-6353 Y [1] ARM & BEARING AS-LIFT (HIGH LIFT MACHINES)  
  124-7096 Y [1] CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES, LH)  
  124-7097 Y [1] CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES, RH)  
  127-6477 [1] TUBE AS  
  127-5647 [1] TUBE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950623
 

211-0380: CONTROL AR-HIGH LIFT

211-0380 CONTROL AR-HIGH LIFT -3-VALVE HYDRAULICS
S/N AWH1-UP
i01701613 SEBP3095
2110380 CONTROL AR-HIGH LIFT Parts scheme 2110380 CONTROL AR-HIGH LIFT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Q-8272 I [2] HOSE AS  
2. 116-8774 [2] TUBE AS  
3. 124-1847 I [1] HOSE AS  
4. 124-1848 I [1] HOSE AS  
5. 124-7096 Y [1] CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES, LH)  
6. 124-7097 Y [1] CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES, RH)  
7. 125-2030 [2] BRACKET AS  
8. 127-5647 [1] TUBE AS  
9. 127-6477 [1] TUBE AS  
10. 194-2605 [1] TUBE AS  
11. 194-2609 [1] TUBE AS  
12. 197-3295 [20] FLANGE-HALF  
13. 206-9059 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
14. 210-9583 Y [1] CONTROL GP-ELECTROHYDRAULIC (3-FUNCTION)  
15. 211-0381 Y [1] ARM GP-LIFT (HIGH LIFT MACHINES)  
17. 4J-0522 [10] SEAL-O-RING  
18. 5H-4020 [2] COVER  
19. 7X-3392 [40] WASHER-HARD (13.5X22.5X3-MM THK)  
20. 8K-4691 [4] CLAMP-HALF  
21. 8S-0023 [6] CLIP (SLOT)  
22. 8S-0024 [6] CLIP (TAB)  
23. 8T-4139 M [14] BOLT (M12X1.75X30-MM)  
24. 8T-4183 M [40] BOLT (M12X1.75X40-MM)  
25. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950624
 

196-8529: CONTROL AR-RIDE

196-8529 CONTROL AR-RIDE
S/N AWH1-UP
2 VALVE
PART OF 257-2195 MACHINE AR
i02148320 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  144-5728 Y [1] CONTROL & LINES GP-RIDE  
  197-4147 Y [1] SWITCH GP-RIDE CONTROL  
  206-9058 Y [1] VALVE & MTG GP-MAIN CONTROL (2-FUNCTION, WITH RIDE CONTROL)  
  123-8944 Y [1] WIRING GP-RIDE CONTROL  
    S/N AWH1-1356
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950625
 

196-8530: CONTROL AR-RIDE

196-8530 CONTROL AR-RIDE
S/N AWH1-UP
3 VALVE
i02128876 SEBP3095
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  144-5728 Y [1] CONTROL & LINES GP-RIDE  
  197-4147 Y [1] SWITCH GP-RIDE CONTROL  
  206-9060 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, WITH RIDE CONTROL)  
  123-8944 Y [1] WIRING GP-RIDE CONTROL  
    S/N AWH1-1356
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950626
 

110-8477: CYLINDER & SEAL GP-LIFT

110-8477 CYLINDER & SEAL GP-LIFT
S/N AWH1-99999
PART OF 171-3027 HYDRAULIC AR-2 VALVE
i00171377 SEBP3095
1108477 CYLINDER & SEAL GP-LIFT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-8181 Y [1] CYLINDER GP-LIFT  
2. 5P-3193 [2] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950627
 

110-8475: CYLINDER & SEAL GP-TILT

110-8475 CYLINDER & SEAL GP-TILT -RH-RH
S/N AWH1-99999
PART OF 171-3027 HYDRAULIC AR-2 VALVE
i00171375 SEBP3095
1108475 CYLINDER & SEAL GP-TILT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-5003 Y [1] CYLINDER GP-TILT (RH)  
2. 7K-9212 [4] SEAL-LIP TYPE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950628
 

110-8476: CYLINDER & SEAL GP-TILT

110-8476 CYLINDER & SEAL GP-TILT -LH-LH
S/N AWH1-99999
PART OF 171-3027 HYDRAULIC AR-2 VALVE
i00171376 SEBP3095
1108476 CYLINDER & SEAL GP-TILT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-5004 Y [1] CYLINDER GP-TILT (LH)  
2. 7K-9212 [4] SEAL-LIP TYPE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30950629
 

124-5526: CYLINDER & SEAL GP-TILT

124-5526 CYLINDER & SEAL GP-TILT -LOGGING MACHINES, RH
S/N AWH1-UP
PART OF 180-3540 HYDRAULIC AR-3 VALVE
i00171488 SEBP3095
1245526 CYLINDER & SEAL GP-TILT Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-0616 Y [1] CYLINDER GP-TILT (LOGGING MACHINES, RH)  
2. 7K-9212 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 980G II :

CONTROL & LINES GP-RIDE
222-1488 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
222-1488 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
222-1488 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
222-1488 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
222-1488 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
144-5728 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
144-5728 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
144-5728 CONTROL & LINES GP-RIDE
CONTROL AR-FAN
2Q-8562 CONTROL AR-FAN
175-4219 CONTROL AR-HIGH LIFT
CONTROL AR-HIGH LIFT
211-0380 CONTROL AR-HIGH LIFT
196-8529 CONTROL AR-RIDE
196-8530 CONTROL AR-RIDE
CYLINDER & SEAL GP-LIFT
110-8477 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-TILT
110-8475 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-TILT
110-8476 CYLINDER & SEAL GP-TILT

Truck sale:

Caterpillar 980G II
 
Caterpillar 980G II
- Wheel Loaders
FINNING CANADA
Caterpillar 980GII, Wheel Loaders, Construction
57,675 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980G II, Wheel Loaders, Construction
53,500 
Caterpillar 980G II, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
54,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
49,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.