AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

204-1662 WIRING GP-AUXILIARY CONTROL -OPERATOR CONTROLS S/N CRB1-UP; CSJ1-UP PART OF 219-7339 CONTROL AR-AUXILIARY AN ATTACHMENT 325C


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 325C EXCAVATOR CRB
 325C L & 325C LN Excavator CRB00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3148 325C CRB   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
BATTERY & WIRING GP
186-4570 BATTERY & WIRING GP
547-7976 SWITCH & WIRE GP-FUEL LEVEL
WIRING GP-AUXILIARY CONTROL
204-1662 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
205-6196 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
205-6196 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
205-6196 WIRING GP-AUXILIARY CONTROL
 

#SEBP31480290
 

204-1662: WIRING GP-AUXILIARY CONTROL

204-1662 WIRING GP-AUXILIARY CONTROL -OPERATOR CONTROLS
S/N CRB1-UP; CSJ1-UP
PART OF 219-7339 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01642077 SEBP3148
2041662 WIRING GP-AUXILIARY CONTROL Parts scheme 2041662 WIRING GP-AUXILIARY CONTROL Parts scheme 2041662 WIRING GP-AUXILIARY CONTROL Parts scheme 2041662 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-1663 [1] HARNESS AS-AUXILIARY  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [16] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
2. 7K-1181 [14] STRAP-CABLE  
3. 3S-2093 [39] STRAP-CABLE  
4. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
5. 111-4837 [2] CLIP  
6. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 111-4836 [2] CLIP  
9. 116-0118 [1] CLIP  
10. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
11. 111-4838 [3] CLIP  
12. 111-4839 [3] STRAP  
13. 7I-2673 [4] STRAP-CABLE  
14. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 193-3513 [1] BRACKET AS  
17. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
18. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 193-3383 [1] SHEET AS  
20. 197-4324 [1] BRACKET AS  
21. 132-5789 [1] CLIP (LADDER)  
22. 4P-7581 [2] CLIP (LADDER)  
23. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
24. 228-7221 [3] HARNESS AS-SOLENOID (1-WAY, 2-WAY FLOW)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)(INCLUDES RECEPTACLE AS & WEDGE)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)(INCLUDES PLUG AS & WEDGE)  
  M   METRIC PART
 

#SEBP31480291
 

205-6196: WIRING GP-AUXILIARY CONTROL

205-6196 WIRING GP-AUXILIARY CONTROL -OPERATOR CONTROLS
S/N CRB1-UP; CSJ1-UP
PART OF 179-5224, 200-6672, 206-4350, 219-7339, 225-4034 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i01602171 SEBP3148
2056196 WIRING GP-AUXILIARY CONTROL Parts scheme 2056196 WIRING GP-AUXILIARY CONTROL Parts scheme 2056196 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 186-4637 [1] HARNESS AS-AUXILIARY  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [16] KIT-CONNECTING PLUG (6-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG & WEDGE)
2. 7K-1181 [24] STRAP-CABLE  
3. 3S-2093 [38] STRAP-CABLE  
4. 116-0118 [3] CLIP  
5. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
6. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
7. 7C-4354 [1] CLIP  
8. 197-4324 [1] BRACKET AS  
9. 111-4837 [1] CLIP  
10. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
11. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
12. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 111-4836 [4] CLIP  
14. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
15. 7I-2673 [5] STRAP-CABLE  
16. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG & WEDGE)
17. 186-4711 [1] BRACKET AS  
18. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 4P-7428 [2] CLIP  
21. 228-7221 [3] HARNESS AS-SOLENOID (1-WAY, 2-WAY FLOW)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  155-2270 KIT-CONNECTING PLUG (2-PIN)  
  M   METRIC PART
 

#SEBP31480292
 

205-6196: WIRING GP-AUXILIARY CONTROL

205-6196 WIRING GP-AUXILIARY CONTROL -OPERATOR CONTROLS
S/N CRB1-UP; CSJ1-UP
PART OF 200-6672, 225-4034 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02447387 SEBP3148
2056196 WIRING GP-AUXILIARY CONTROL Parts scheme 2056196 WIRING GP-AUXILIARY CONTROL Parts scheme 2056196 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-7880 C [1] HARNESS AS-CONTROL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  170-9479 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  170-9480 [1] PLUG AS-CONNECTOR (54-PIN, BROWN)  
  163-6759 [1] SEAL  
2. 7K-1181 [24] STRAP-CABLE  
3. 3S-2093 C [32] STRAP-CABLE  
4. 116-0118 C [1] CLIP  
5. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
6. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
7. 7C-4354 [1] CLIP  
8. 111-4837 [1] CLIP  
9. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
10. 111-4836 [4] CLIP  
11. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
12. 7I-2673 C [2] STRAP-CABLE  
13. 230-5375 C [1] HARNESS AS-SOLENOID (ENGINE, PUMP CONTROL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
14. 186-4711 [1] BRACKET AS  
15. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
16. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
17. 4P-7428 [2] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP31480293
 

205-6196: WIRING GP-AUXILIARY CONTROL

205-6196 WIRING GP-AUXILIARY CONTROL -OPERATOR CONTROLS
S/N CRB1-UP; CSJ1-UP
PART OF 200-6672, 225-4034 CONTROL AR-AUXILIARY
Type 3
AN ATTACHMENT
i02338289 SEBP3148
2056196 WIRING GP-AUXILIARY CONTROL Parts scheme 2056196 WIRING GP-AUXILIARY CONTROL Parts scheme 2056196 WIRING GP-AUXILIARY CONTROL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-5380 C [1] HARNESS AS-WORK TOOL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  170-9479 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  170-9480 [1] PLUG AS-CONNECTOR (54-PIN, BROWN)  
  163-6759 [1] SEAL  
2. 7K-1181 [24] STRAP-CABLE  
3. 3S-2093 [33] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
6. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
7. 7C-4354 [1] CLIP  
8. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
10. 111-4836 [4] CLIP  
11. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
12. 7I-2673 [2] STRAP-CABLE  
13. 230-5375 [1] HARNESS AS-SOLENOID (ENGINE, PUMP CONTROL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
14. 186-4711 [1] BRACKET AS  
15. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
16. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
17. 4P-7428 [3] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP31480294
 

214-5104: WIRING GP-BOOM

214-5104 WIRING GP-BOOM -VARIABLE ADJUSTABLE
S/N CRB1-UP; CSJ1-UP
PART OF 214-1529 BOOM AR-VARIABLE ADJUSTABLE
AN ATTACHMENT
i01706678 SEBP3148
2145104 WIRING GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-0806 [25] STRAP-CABLE  
2. 217-3869 [1] HARNESS AS-WIRING (VARIABLE ADJUSTABLE BOOM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 224-6131 [1] HARNESS AS-WIRING (VARIABLE ADJUSTABLE BOOM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
 

#SEBP31480295
 

222-2015: WIRING GP-BOOM

222-2015 WIRING GP-BOOM -MEDIUM PRESSURE
S/N CRB1-UP; CSJ1-UP
PART OF 219-7805 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i01713606 SEBP3148
2222015 WIRING GP-BOOM Parts scheme 2222015 WIRING GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3491 [1] HARNESS AS-PLATFORM  
  8T-8737 [14] PLUG-SEAL  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 7K-1181 B [6] STRAP-CABLE  
3. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
4. 111-4837 [1] CLIP  
5. 149-5050 [3] RELAY (24-VOLT)(MEDIUM PRESSURE)  
6. 7X-2619 M [1] BOLT (M6X1X10-MM)  
7. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
8. 5C-9553 M [2] BOLT (M6X1X16-MM)  
9. 222-3493 [1] HARNESS AS-PANEL (RELAY)  
  8T-8737 [3] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 3S-2093 B [46] STRAP-CABLE  
11. 222-3492 [1] HARNESS AS-CHASSIS  
  8T-8737 [1] PLUG-SEAL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12. [1] HARNESS AS-CHASSIS  
  3S-2093 [6] STRAP-CABLE  
  8T-8737 [7] PLUG-SEAL  
  121-1022 [2] DIODE  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31480296
 

222-2015: WIRING GP-BOOM

222-2015 WIRING GP-BOOM -MEDIUM PRESSURE
S/N CRB1-UP; CSJ1-UP
PART OF 219-7805 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02217921 SEBP3148
2222015 WIRING GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3491 [1] HARNESS AS-PLATFORM  
  8T-8737 [14] PLUG-SEAL  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 7K-1181 B [4] STRAP-CABLE  
3. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
4. 111-4837 [2] CLIP  
5. 149-5050 [3] RELAY (24-VOLT)  
8. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
9. 222-3493 [1] HARNESS AS-PANEL (RELAY)  
  8T-8737 [3] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 3S-2093 B [46] STRAP-CABLE  
11. 223-5651 C [1] HARNESS AS-PANEL (RELAY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [2] STRAP-CABLE  
  121-1022 [2] DIODE  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
14. 4I-7889 [1] SPACER (11X25X45-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP31480297
 

193-3540: WIRING GP-BOOM FLOAT

193-3540 WIRING GP-BOOM FLOAT
S/N CRB1-628; CSJ1-732
PART OF 193-6739 CONTROL AR-BOOM
AN ATTACHMENT
i01599330 SEBP3148
1933540 WIRING GP-BOOM FLOAT Parts scheme 1933540 WIRING GP-BOOM FLOAT Parts scheme 1933540 WIRING GP-BOOM FLOAT Parts scheme 1933540 WIRING GP-BOOM FLOAT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-3444 [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
2. 204-1672 [1] HARNESS AS-WIRING (RELAY)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
3. 7K-1181 [19] STRAP-CABLE  
4. 3S-2093 [15] STRAP-CABLE  
5. 7I-2673 [7] STRAP-CABLE  
6. 111-4836 [2] CLIP  
7. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
8. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM, DISABLE)  
8A. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM UP/DOWN RELAY 1)  
8B. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM UP/DOWN RELAY 2)  
9. 7X-2619 M [3] BOLT (M6X1X10-MM)  
10. 186-4639 [1] SWITCH AS-ROCKER (SMARTBOOM)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
11. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
12. 204-1611 [1] STRAP (DUAL)  
13. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
14. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP31480298
 

193-3540: WIRING GP-BOOM FLOAT

193-3540 WIRING GP-BOOM FLOAT
S/N CRB629-UP; CSJ733-UP
PART OF 193-6739 CONTROL AR-BOOM
AN ATTACHMENT
i01996263 SEBP3148
1933540 WIRING GP-BOOM FLOAT Parts scheme 1933540 WIRING GP-BOOM FLOAT Parts scheme 1933540 WIRING GP-BOOM FLOAT Parts scheme 1933540 WIRING GP-BOOM FLOAT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 234-0713 C [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 204-1672 [1] HARNESS AS-WIRING (RELAY)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 7K-1181 C [17] STRAP-CABLE  
4. 3S-2093 [15] STRAP-CABLE  
5. 7I-2673 [7] STRAP-CABLE  
6. 111-4836 C [3] CLIP  
7. 8T-4196 CM [2] BOLT (M10X1.5X35-MM)  
8. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM, DISABLE)  
8A. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM UP/DOWN RELAY 1)  
8B. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM UP/DOWN RELAY 2)  
9. 7X-2619 M [3] BOLT (M6X1X10-MM)  
10. 186-4639 [1] SWITCH AS-ROCKER (SMART BOOM)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
11. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
13. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
14. 8T-4121 C [3] WASHER-HARD (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP31480299
 

184-7622: WIRING GP-CAB

184-7622 WIRING GP-CAB
S/N CRB1-642; CSJ1-UP
PART OF 234-3198 CAB AR, 167-4090, 184-7617, 211-7983, 216-2192, 217-5667, 217-5668, 218-0612 CAB GP
ALSO AN ATTACHMENT
i01394347 SEBP3148
1847622 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 198-0857 [1] HARNESS AS (CAB)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
8. 163-6810 [1] HARNESS AS-MONITOR  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 188-7681 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engine for Caterpillar Built Machines
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0091 FMI 02 Incorrect Throttle Switch inputs
3126B Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engine for Caterpillar Built Machines
Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0444 FMI 05 Start Relay open circuit
3126B Engine for Caterpillar Built Machines
CID 0444 FMI 06 Start Relay short to ground
3126B Engine for Caterpillar Built Machines
Start Relay Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Wiring Information
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
3126B Engine for Caterpillar Built Machines
CID 0291 FMI 12 Engine Cooling Fan Solenoid malfunction
3126B Engine for Caterpillar Built Machines
Engine Fan Speed Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 325C :

SWITCH GP-WIPER
252-1225 SWITCH GP-WIPER
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
223-7577 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
WIRING GP-AUXILIARY CONTROL
205-6196 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
205-6196 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
205-6196 WIRING GP-AUXILIARY CONTROL
WIRING GP-BOOM
214-5104 WIRING GP-BOOM
WIRING GP-BOOM
222-2015 WIRING GP-BOOM
WIRING GP-BOOM
222-2015 WIRING GP-BOOM
WIRING GP-BOOM FLOAT
193-3540 WIRING GP-BOOM FLOAT
WIRING GP-BOOM FLOAT
193-3540 WIRING GP-BOOM FLOAT

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.