223-7090 LINES GP-BOOM CYLINDER -SMARTBOOM, BOOM LOAD CONTROL S/N CAP949-UP; CGZ443-UP PART OF 186-1296 CONTROL AR-AUXILIARY Type 3 AN ATTACHMENT 330C L

HYDRAULIC SYSTEM

LINES GP-CYLINDER

0. 223-7090 LINES GP-B

LINES GP-DRAIN

1. 193-6383 LINES GP-B
2. 193-6383 LINES GP-B
3. 193-6387 LINES GP-B
4. 193-6387 LINES GP-B

LINES GP-BUCKET

5. 115-8693 LINES GP-B
6. 115-8694 LINES GP-B
7. 256-1005 LINES GP-B

LINES GP-COUPLER

8. 154-4078 LINES GP-C
9. 154-4078 LINES GP-C
0. INFORMATION

EXCAVATOR 330C L EXCAVATOR CAP
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3149 330C L CAP (2001)

HYDRAULIC SYSTEM

LINES GP-CYLINDER

223-7090 LINES GP-BOOM CYLINDER

115-8693 LINES GP-BUCKET CYLINDER

115-8694 LINES GP-BUCKET CYLINDER

256-1005 LINES GP-BUCKET CYLINDER

#SEBP31490600

223-7090: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

223-7090 LINES GP-BOOM CYLINDER -SMARTBOOM, BOOM LOAD CONTROL
S/N CAP949-UP; CGZ443-UP
PART OF 186-1296 CONTROL AR-AUXILIARY
Type 3
AN ATTACHMENT

i02474502 SEBP3149

2237090 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[16]	STRAP-CABLE
2.	115-8856	[2]	SUPPORT AS
3.	124-0887	[1]	SUPPORT AS
4.	124-0891	[1]	SUPPORT AS
5.	133-5813	[4]	BAND-MARKER (GRAY, P)
6.	263-9982 CY	[2]	VALVE GP-LOAD CONTROL (BOOM CYLINDER)
7.	207-6228	[1]	TUBE AS
8.	207-6229	[1]	TUBE AS
9.	234-5560 I	[2]	HOSE AS
10.	234-5570 I	[2]	HOSE AS
11.	234-5571 I	[2]	HOSE AS
12.	108-7550	[4]	CLIP
13.	148-8336	[6]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8636	[1]	CONNECTOR
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
14.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8713	[1]	CONNECTOR
	3D-2824	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
15.	148-8378	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8724	[1]	ELBOW
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
16.	148-8390	[2]	ELBOW AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	6V-8626		ELBOW
	7J-9108	[1]	SEAL-O-RING
17.	1P-3703	[2]	SEAL-RECTANGULAR
18.	1P-3704	[2]	SEAL-RECTANGULAR
19.	5K-9090	[2]	SEAL-O-RING
20.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
22.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
23.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
25.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31490601

193-6383: LINES GP-BOOM DRAIN

LINES GP-BOOM DRAIN

193-6383 LINES GP-BOOM DRAIN -REACH BOOM
S/N CAP1-UP; CGZ1-UP
Type 1
AN ATTACHMENT

i01538334 SEBP3149

1936383 LINES GP-BOOM DRAIN Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-9108	[2]	SEAL-O-RING
2.	202-7001	[2]	CLIP
3.	187-9862	[1]	PLATE
4.	193-6663	[1]	TUBE AS
5.	202-7019	[1]	SUPPORT AS
6.	093-1291	[3]	CLAMP
7.	153-8867	[2]	CLIP
8.	206-2407	[1]	CLIP
9.	208-5126	[1]	TUBE AS
10.	208-5127	[1]	TUBE AS
11.	7Y-4868	[1]	CLIP
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4133 M	[1]	NUT (M10X1.5-THD)
14.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
15.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
16.	8T-4184 M	[2]	BOLT (M12X1.75X45-MM)
17.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
18.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-4244 M	[4]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP31490602

193-6383: LINES GP-BOOM DRAIN

LINES GP-BOOM DRAIN

193-6383 LINES GP-BOOM DRAIN -REACH BOOM
S/N CAP1-UP; CGZ1-UP
Type 2
AN ATTACHMENT

i02320137 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-9862	[1]	PLATE
2.	193-6663	[1]	TUBE AS
3.	202-7001	[2]	CLIP
4.	093-1291 C	[2]	CLAMP
5.	096-5766 C	[1]	CLAMP
6.	153-8867	[2]	CLIP
7.	C	[1]	BAR-GUIDE
8.	202-7019	[1]	SUPPORT AS
9.	206-2407	[1]	CLIP
10.	208-5126	[1]	TUBE AS
11.	208-5127	[1]	TUBE AS
12.	7J-9108 C	[3]	SEAL-O-RING
13.	7Y-4868	[1]	CLIP
14.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[1]	NUT (M10X1.5-THD)
16.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
17.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
18.	8T-4184 M	[2]	BOLT (M12X1.75X45-MM)
19.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
20.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
21.	8T-4244 M	[4]	NUT (M12X1.75-THD)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP31490603

193-6387: LINES GP-BOOM DRAIN

LINES GP-BOOM DRAIN

193-6387 LINES GP-BOOM DRAIN -MASS BOOM
S/N CAP1-UP; CGZ1-UP
Type 1
AN ATTACHMENT

i02336940 SEBP3149

1936387 LINES GP-BOOM DRAIN Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-9861	[1]	CLIP
2.	187-9862	[1]	PLATE
3.	193-6665	[1]	TUBE AS
4.	202-6872	[1]	TUBE AS
5.	202-6875	[1]	TUBE AS
6.	202-7001	[4]	CLIP
7.	093-1291	[3]	CLAMP
8.	202-7019	[1]	SUPPORT AS
9.	6V-8398	[2]	SEAL-O-RING
10.	7J-9108	[2]	SEAL-O-RING
11.	7Y-4868	[1]	CLIP
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4133 M	[1]	NUT (M10X1.5-THD)
14.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
15.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
16.	8T-4184 M	[2]	BOLT (M12X1.75X45-MM)
17.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
18.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-4244 M	[4]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP31490604

193-6387: LINES GP-BOOM DRAIN

LINES GP-BOOM DRAIN

193-6387 LINES GP-BOOM DRAIN -MASS BOOM
S/N CAP1-UP; CGZ1-UP
Type 2
AN ATTACHMENT

i02336952 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-9861	[1]	CLIP
2.	187-9862	[1]	PLATE
3.	193-6665	[1]	TUBE AS
4.	202-6872	[1]	TUBE AS
5.	202-6875	[1]	TUBE AS
6.	202-7001 C	[2]	CLIP
7.	093-1291 C	[2]	CLAMP
8.	202-7019	[1]	SUPPORT AS
9.	6V-8398	[2]	SEAL-O-RING
10.	7J-9108	[2]	SEAL-O-RING
11.	7Y-4868	[1]	CLIP
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4133 M	[1]	NUT (M10X1.5-THD)
14.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
15.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
16.	8T-4184 M	[2]	BOLT (M12X1.75X45-MM)
17.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
18.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-4244 M	[4]	NUT (M12X1.75-THD)
20.	202-7021 C	[2]	CLIP
21.	096-5766 C	[1]	CLAMP
22.	C	[1]	BAR-GUIDE
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP31490605

115-8693: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

115-8693 LINES GP-BUCKET CYLINDER
S/N CAP1-UP; CGZ1-UP
PART OF 177-2463 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i00473973 SEBP3149

1158693 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-8960	[1]	TUBE AS
2.	1P-3703	[1]	SEAL-RECTANGULAR
3.	8T-4910 M	[4]	BOLT (M12X1.75X60-MM)
4.	119-2379	[1]	SUPPORT AS
5.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
7.	119-2378	[1]	SUPPORT AS
8.	7Y-3732	[2]	CLIP
9.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
10.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP31490606

115-8694: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

115-8694 LINES GP-BUCKET CYLINDER
S/N CAP1-UP; CGZ1-UP
PART OF 191-5552 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i00474014 SEBP3149

1158694 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-8961	[1]	TUBE AS
2.	1P-3704	[1]	SEAL-RECTANGULAR
3.	172-9966 M	[4]	BOLT (M12X1.75X65-MM)
4.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
5.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	7Y-3732	[4]	CLIP
7.	474-7168	[2]	SUPPORT AS
8.	453-3454	[8]	WASHER-HARD (11X21X2.5-MM THK)
9.	457-5821 M	[8]	BOLT (M10X1.5X35-MM)
10.	462-3579	[2]	SUPPORT AS
	M		METRIC PART

#SEBP31490607

256-1005: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

256-1005 LINES GP-BUCKET CYLINDER
S/N CAP1-UP; CGZ1-UP
PART OF 256-0983 GUARD AR-CYLINDER
AN ATTACHMENT

i02520416 SEBP3149

2561005 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	124-0911	[1]	SUPPORT AS
2.	263-0408	[1]	SUPPORT AS
3.	263-0411	[1]	TUBE AS
4.	263-2211	[1]	BLOCK
5.	1P-3704	[2]	SEAL-RECTANGULAR
6.	7Y-3732	[2]	CLIP
7.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
9.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
10.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	8T-6868 M	[4]	BOLT (M12X1.75X80-MM)
	M		METRIC PART

#SEBP31490608

154-4078: LINES GP-COUPLER

LINES GP-COUPLER

154-4078 LINES GP-COUPLER
S/N CAP1-UP; CGZ1-UP
D-FAMILY
Type 1
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT

i00902932 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	206-7107 I	[2]	HOSE AS
2.	6V-8397	[10]	SEAL-O-RING
3.	189-4150	[1]	PIN AS
4.	6V-8936	[4]	REDUCER
5.	6V-8398	[4]	SEAL-O-RING
6.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
7.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
8.	2H-2221	[4]	CLAMP
9.	8S-3215	[6]	CLAMP-TUBE
10.	6V-8980	[2]	ELBOW
11.	174-1724 I	[2]	HOSE AS
12.	6V-9168	[2]	NUT (11/16-16-THD)
14.	154-5632	[1]	LINK AS
15.	154-5633	[1]	LINK AS
16.	189-4148	[1]	PIN AS
19.	9X-2199 LM	[2]	BOLT (M30X3.5X50-MM)
20.	8X-7933 L	[2]	SPACER (33X57X14-MM THK)
21.	7K-1181	[4]	STRAP-CABLE
22.	166-5495 L	[1]	CHANNEL
25.	206-7102	[2]	TUBE AS
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	L		FOR USE WHEN TRANSPORTING WITHOUT BUCKET
	M		METRIC PART

#SEBP31490609

154-4078: LINES GP-COUPLER

LINES GP-COUPLER

154-4078 LINES GP-COUPLER
S/N CAP1-UP; CGZ1-UP
D-FAMILY
Type 2
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT

i02320598 SEBP3149

For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	206-7107 I	[2]	HOSE AS
2.	6V-8397	[10]	SEAL-O-RING
3.	189-4150	[1]	PIN AS
4.	6V-8936	[4]	REDUCER
5.	6V-8398	[4]	SEAL-O-RING
6.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
7.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
8.	2H-2221	[4]	CLAMP
9.	8S-3215	[6]	CLAMP-TUBE
10.	6V-8980	[2]	ELBOW
11.	174-1724 I	[2]	HOSE AS
12.	6V-9168	[2]	NUT (11/16-16-THD)
14.	206-8974 C	[1]	LINK AS
15.	206-8973 C	[1]	LINK AS
16.	189-4148	[1]	PIN AS
19.	9X-2199 LM	[2]	BOLT (M30X3.5X50-MM)
20.	8X-7933 L	[2]	SPACER (33X57X14-MM THK)
21.	7K-1181	[4]	STRAP-CABLE
22.	166-5495 L	[1]	CHANNEL
25.	206-7102	[2]	TUBE AS
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	L		USE TO PREVENT DAMAGE TO LINK AS. WHEN MACHINE IS MOVED W/O BUCKET OR QUICK COUPLER
	M		METRIC PART