AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

192-6851 LINES GP-FRONT S/N CAP1-1793; CGZ1-746 PART OF 190-7811, 201-9237 HYDRAULIC AR 330C L EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-FRONT

EXCAVATOR 330C L EXCAVATOR CAP
 330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3149 330C L CAP   (2001)

HYDRAULIC SYSTEM

LINES GP-FRONT
LINES GP-FRONT
192-6851 LINES GP-FRONT
LINES GP-FRONT
192-6851 LINES GP-FRONT
LINES GP-FRONT
192-6851 LINES GP-FRONT
LINES GP-FRONT
192-6851 LINES GP-FRONT
 

#SEBP31490630
 

192-6851: LINES GP-FRONT

192-6851 LINES GP-FRONT
S/N CAP1-1793; CGZ1-746
PART OF 190-7811, 201-9237 HYDRAULIC AR
i01528276 SEBP3149
1926851 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-4932 I [1] HOSE AS  
2. 087-4935 I [1] HOSE AS  
3. 101-7398 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
4. 115-8739 I [4] HOSE AS  
5. 131-9547 [1] CLIP  
6. 131-9548 [1] SUPPORT AS  
7. 158-8117 Y [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
8. 158-8160 Y [1] VALVE GP-LOAD CONTROL (STICK CYLINDER)  
9. 194-0101 I [1] HOSE AS  
10. 194-0105 I [1] HOSE AS  
11. 194-0115 [2] TUBE AS  
12. 218-1128 [1] TUBE AS  
13. 194-0174 Y [1] HOSE GP-HYDRAULIC  
14. 194-0177 Y [1] HOSE GP-HYDRAULIC (CONTROL VALVE, STICK)  
15. 194-0180 Y [1] HOSE GP-HYDRAULIC  
16. 194-0280 [1] BLOCK  
17. 207-6683 [1] TUBE AS  
18. 212-5443 [1] TUBE AS  
19. 101-7404 M [30] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
20. 108-7550 [2] CLIP  
21. 123-2809 [1] SUPPORT AS  
22. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
23. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
24. 1P-3703 [9] SEAL-RECTANGULAR  
25. 1P-3704 [4] SEAL-RECTANGULAR  
26. 1P-3705 [1] SEAL-RECTANGULAR  
27. 1P-5767 [6] FLANGE-HALF  
28. 199-1286 M [6] BOLT-SOCKET HEAD (M10X1.5X150-MM)  
29. 4J-5267 [6] SEAL-O-RING  
30. 4J-5268 [1] SEAL-O-RING  
31. 5K-9090 [4] SEAL-O-RING  
32. 5P-8077 [2] FLANGE-HALF  
33. 6V-0400 [8] FLANGE-HALF  
34. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4140 M [4] BOLT (M16X2X60-MM)  
37. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
38. 8T-4194 M [28] BOLT (M12X1.75X50-MM)  
39. 8T-4223 [38] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
41. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
42. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
43. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490631
 

192-6851: LINES GP-FRONT

192-6851 LINES GP-FRONT
S/N CAP1794-1837; CGZ747-768
PART OF 190-7811, 201-9237 HYDRAULIC AR
i02298029 SEBP3149
1926851 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-4932 I [1] HOSE AS  
2. 087-4935 I [1] HOSE AS  
3. 101-7398 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
4. 115-8739 I [4] HOSE AS  
5. 131-9547 [1] CLIP  
6. 131-9548 [1] SUPPORT AS  
7. 250-2500 CY [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
8. 250-2497 CY [1] VALVE GP-LOAD CONTROL (STICK CYLINDER)  
9. 194-0101 I [1] HOSE AS  
10. 194-0105 I [1] HOSE AS  
11. 194-0115 [2] TUBE AS  
12. 218-1128 [1] TUBE AS  
13. 194-0174 Y [1] HOSE GP-HYDRAULIC  
14. 194-0177 Y [1] HOSE GP-HYDRAULIC (CONTROL VALVE, STICK)  
15. 194-0180 Y [1] HOSE GP-HYDRAULIC  
16. 194-0280 [1] BLOCK  
17. 207-6683 [1] TUBE AS  
18. 212-5443 [1] TUBE AS  
19. 101-7404 M [30] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
20. 108-7550 [2] CLIP  
21. 123-2809 [1] SUPPORT AS  
22. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
23. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
24. 1P-3703 [9] SEAL-RECTANGULAR  
25. 1P-3704 [4] SEAL-RECTANGULAR  
26. 1P-3705 [1] SEAL-RECTANGULAR  
27. 1P-5767 [6] FLANGE-HALF  
28. 199-1286 M [6] BOLT-SOCKET HEAD (M10X1.5X150-MM)  
29. 4J-5267 [6] SEAL-O-RING  
30. 4J-5268 [1] SEAL-O-RING  
31. 5K-9090 [4] SEAL-O-RING  
32. 5P-8077 [2] FLANGE-HALF  
33. 6V-0400 [8] FLANGE-HALF  
34. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4140 M [4] BOLT (M16X2X60-MM)  
37. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
38. 8T-4194 M [28] BOLT (M12X1.75X50-MM)  
39. 8T-4223 [38] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
41. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
42. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
43. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490632
 

192-6851: LINES GP-FRONT

192-6851 LINES GP-FRONT
S/N CAP1838-1916; CGZ769-827
PART OF 190-7811, 201-9237 HYDRAULIC AR
i02544008 SEBP3149
1926851 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-4932 I [1] HOSE AS  
2. 087-4935 I [1] HOSE AS  
3. 101-7398 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
4. 115-8739 I [4] HOSE AS  
5. 131-9547 [1] CLIP  
6. 131-9548 [1] SUPPORT AS  
7. 250-2578 CY [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
8. 250-2577 CY [1] VALVE GP-LOAD CONTROL (STICK CYLINDER)  
9. 194-0101 I [1] HOSE AS  
10. 194-0105 I [1] HOSE AS  
11. 194-0115 [2] TUBE AS  
12. 218-1128 [1] TUBE AS  
13. 194-0174 Y [1] HOSE GP-HYDRAULIC  
14. 194-0177 Y [1] HOSE GP-HYDRAULIC (CONTROL VALVE, STICK)  
15. 194-0180 Y [1] HOSE GP-HYDRAULIC  
16. 194-0280 [1] BLOCK  
17. 207-6683 [1] TUBE AS  
18. 212-5443 [1] TUBE AS  
19. 101-7404 M [30] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
20. 108-7550 [2] CLIP  
21. 123-2809 [1] SUPPORT AS  
22. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
23. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
24. 1P-3703 [9] SEAL-RECTANGULAR  
25. 1P-3704 [4] SEAL-RECTANGULAR  
26. 1P-3705 [1] SEAL-RECTANGULAR  
27. 1P-5767 [6] FLANGE-HALF  
28. 199-1286 M [6] BOLT-SOCKET HEAD (M10X1.5X150-MM)  
29. 4J-5267 [6] SEAL-O-RING  
30. 4J-5268 [1] SEAL-O-RING  
31. 5K-9090 [4] SEAL-O-RING  
32. 5P-8077 [2] FLANGE-HALF  
33. 6V-0400 [8] FLANGE-HALF  
34. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4140 M [4] BOLT (M16X2X60-MM)  
37. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
38. 8T-4194 M [28] BOLT (M12X1.75X50-MM)  
39. 8T-4223 [38] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
41. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
42. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
43. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490633
 

192-6851: LINES GP-FRONT

192-6851 LINES GP-FRONT
S/N CAP1917-UP; CGZ828-UP
PART OF 190-7811, 201-9237 HYDRAULIC AR
i02544009 SEBP3149
1926851 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-4932 I [1] HOSE AS  
2. 087-4935 I [1] HOSE AS  
3. 101-7398 M [4] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
4. 115-8739 I [4] HOSE AS  
5. 131-9547 [1] CLIP  
6. 131-9548 [1] SUPPORT AS  
7. 264-9963 CY [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
8. 264-9962 CY [1] VALVE GP-LOAD CONTROL (STICK CYLINDER)  
9. 194-0101 I [1] HOSE AS  
10. 194-0105 I [1] HOSE AS  
11. 194-0115 [2] TUBE AS  
12. 218-1128 [1] TUBE AS  
13. 194-0174 Y [1] HOSE GP-HYDRAULIC  
14. 194-0177 Y [1] HOSE GP-HYDRAULIC (CONTROL VALVE, STICK)  
15. 194-0180 Y [1] HOSE GP-HYDRAULIC  
16. 194-0280 [1] BLOCK  
17. 207-6683 [1] TUBE AS  
18. 212-5443 [1] TUBE AS  
19. 101-7404 M [30] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
20. 108-7550 [2] CLIP  
21. 123-2809 [1] SUPPORT AS  
22. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
23. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
24. 1P-3703 [9] SEAL-RECTANGULAR  
25. 1P-3704 [4] SEAL-RECTANGULAR  
26. 1P-3705 [1] SEAL-RECTANGULAR  
27. 1P-5767 [6] FLANGE-HALF  
28. 199-1286 M [6] BOLT-SOCKET HEAD (M10X1.5X150-MM)  
29. 4J-5267 [6] SEAL-O-RING  
30. 4J-5268 [1] SEAL-O-RING  
31. 5K-9090 [4] SEAL-O-RING  
32. 5P-8077 [2] FLANGE-HALF  
33. 6V-0400 [8] FLANGE-HALF  
34. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4140 M [4] BOLT (M16X2X60-MM)  
37. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
38. 8T-4194 M [28] BOLT (M12X1.75X50-MM)  
39. 8T-4223 [38] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
41. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
42. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
43. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490634
 

192-6866: LINES GP-FRONT

192-6866 LINES GP-FRONT -2-PUMP, 1-WAY
S/N CAP1-565; CGZ1-250
PART OF 193-6373 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01634830 SEBP3149
1926866 LINES GP-FRONT Parts scheme 1926866 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-4282 M [4] BOLT-SOCKET HEAD (M10X1.5X100-MM)  
2. 133-5773 I [1] HOSE AS  
3. 142-7781 [1] BLOCK  
4. 177-2653 Y [1] VALVE GP-RELIEF (LINE)  
5. 187-5853 [2] BLOCK  
6. 187-5854 [1] BLOCK  
7. 187-5855 [1] FLANGE  
8. 187-6850 [1] PLATE  
9. 199-1828 I [1] HOSE AS  
10. 202-3751 [2] PLATE  
11. 202-3752 [2] PLATE  
12. 204-8178 [1] SUPPORT AS  
13. 204-8184 [1] PLATE AS  
14. 204-8318 [1] SUPPORT AS  
15. 204-8319 [1] SUPPORT AS  
16. 204-8320 I [1] HOSE AS  
17. 207-6331 I [1] HOSE AS  
18. 207-6430 [1] TUBE AS  
19. 212-5148 [2] BLOCK  
20. 099-8232 [1] SEAL-O-RING  
21. 101-7404 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
22. 148-8334 [1] CONNECTOR AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8T-3611 [1] CONNECTOR  
23. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
24. 148-8347 [1] ELBOW AS  
  6V-9007 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
25. 148-8355 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9005 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
26. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
27. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
28. 196-0484 [1] TUBE AS  
29. 1P-3703 [8] SEAL-RECTANGULAR  
30. 1P-4578 [2] FLANGE-HALF  
31. 204-8182 [2] GROMMET  
32. 204-8183 [1] PLATE  
33. 4J-0522 [1] SEAL-O-RING  
34. 4J-5267 [1] SEAL-O-RING  
35. 5K-9090 [2] SEAL-O-RING  
36. 5P-7470 [1] CLIP (SLOT)  
37. 5P-7471 [1] CLIP (TAB)  
38. 6V-0545 [1] GROMMET  
39. 6V-9746 [1] SEAL-O-RING  
40. 7Y-3731 [1] FLANGE  
41. 8T-3957 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
42. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
43. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
44. 8T-4172 M [4] BOLT (M10X1.5X80-MM)  
45. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
46. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
47. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
48. 8T-4223 [38] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
50. 8T-4956 M [12] BOLT (M12X1.75X35-MM)  
51. 8T-5005 M [3] BOLT (M10X1.5X70-MM)  
52. 8T-5092 M [8] BOLT (M12X1.75X150-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490635
 

192-6866: LINES GP-FRONT

192-6866 LINES GP-FRONT -2-PUMP, 1-WAY
S/N CAP566-1134; CGZ251-503
PART OF 193-6373 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02169472 SEBP3149
1926866 LINES GP-FRONT Parts scheme 1926866 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-3731 [1] FLANGE  
2. 108-4282 M [4] BOLT-SOCKET HEAD (M10X1.5X100-MM)  
3. 133-5773 I [1] HOSE AS  
4. 142-7781 [1] BLOCK  
5. 177-2653 Y [1] VALVE GP-RELIEF (LINE)(WORK TOOL)  
6. 187-5853 [1] BLOCK  
7. 187-5854 [1] BLOCK  
8. 187-5855 [1] FLANGE  
9. 199-1828 I [1] HOSE AS  
10. 204-8318 [1] SUPPORT AS  
11. 204-8319 [1] SUPPORT AS  
12. 204-8320 I [1] HOSE AS  
13. 207-6430 [1] TUBE AS  
14. 207-6443 CI [1] HOSE AS  
15. 212-5148 [2] BLOCK  
16. 212-5413 C [1] SUPPORT AS  
17. 212-5416 C [1] PLATE  
18. 212-5567 C [2] PLATE  
19. 212-5572 C [1] SUPPORT AS  
20. 212-5574 C [1] PLATE  
21. 212-5575 C [1] PLATE  
22. 218-1005 C [1] SUPPORT AS  
23. 218-1139 [1] BLOCK  
24. 099-8232 [1] SEAL-O-RING  
25. 101-7402 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
26. 101-7404 M [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
27. 148-8334 [1] CONNECTOR AS  
  8T-3611 [1] CONNECTOR  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
28. 148-8335 [1] CONNECTOR AS  
  6V-8635 [1] CONNECTOR  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
29. 148-8347 [1] ELBOW AS  
  6V-9007 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
30. 148-8355 [1] ELBOW AS  
  6V-9005 [1] ELBOW  
  5K-9090 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
31. 148-8387 [1] ELBOW AS  
  6V-9855 [1] ELBOW  
  6V-8400 [1] SEAL-O-RING  
32. 148-8411 [1] PLUG AS  
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
33. 164-4180 [1] PLUG AS  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
  7M-8485 [1] SEAL-O-RING  
34. 196-0484 [1] TUBE AS  
35. 1P-3703 [7] SEAL-RECTANGULAR  
36. 1P-4578 [2] FLANGE-HALF  
37. 2M-0849 C [4] WASHER-HARD (13.5X25.5X5-MM THK)  
38. 4J-0522 [1] SEAL-O-RING  
39. 4J-5267 [1] SEAL-O-RING  
40. 5K-9090 [2] SEAL-O-RING  
41. 5P-7468 C [2] CLIP (SLOT)  
42. 5P-7469 C [2] CLIP (TAB)  
43. 5P-7470 C [2] CLIP (SLOT)  
44. 5P-7471 C [2] CLIP (TAB)  
45. 5P-8182 C [2] GROMMET (46-MM ID)  
46. 6V-0545 C [2] GROMMET  
47. 6V-9746 [1] SEAL-O-RING  
48. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
50. 8T-4172 M [4] BOLT (M10X1.5X80-MM)  
51. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
52. 8T-4192 CM [4] BOLT (M12X1.75X25-MM)  
53. 8T-4223 C [41] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-4956 CM [20] BOLT (M12X1.75X35-MM)  
55. 8T-5001 CM [1] BOLT (M12X1.75X130-MM)  
56. 8T-5092 M [8] BOLT (M12X1.75X150-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490636
 

192-6866: LINES GP-FRONT

192-6866 LINES GP-FRONT -2-PUMP, 1-WAY
S/N CAP1135-UP; CGZ504-UP
PART OF 193-6373 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i02169475 SEBP3149
1926866 LINES GP-FRONT Parts scheme 1926866 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-4282 M [4] BOLT-SOCKET HEAD (M10X1.5X100-MM)  
2. 133-5773 I [1] HOSE AS  
3. 142-7781 [1] BLOCK  
4. 177-2653 Y [1] VALVE GP-RELIEF (LINE)(LINE, WORK TOOL)  
5. 187-5853 [1] BLOCK  
6. 187-5854 [1] BLOCK  
7. 187-5855 [1] FLANGE  
8. 199-1828 I [1] HOSE AS  
9. 204-8318 [1] SUPPORT AS  
10. 204-8319 [1] SUPPORT AS  
11. 204-8320 I [1] HOSE AS  
12. 207-6430 [1] TUBE AS  
13. 207-6443 I [1] HOSE AS  
14. 212-5148 [2] BLOCK  
15. 212-5567 [2] PLATE  
16. 212-5572 [1] SUPPORT AS  
17. 212-5574 [1] PLATE  
18. 212-5575 [1] PLATE  
19. 218-1005 [1] SUPPORT AS  
20. 218-1139 [1] BLOCK  
21. 241-4060 C [1] SUPPORT AS  
22. 099-8232 [1] SEAL-O-RING  
23. 101-7402 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
24. 101-7404 M [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
25. 148-8334 [1] CONNECTOR AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8T-3611 [1] CONNECTOR  
26. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
27. 148-8347 [1] ELBOW AS  
  6V-9007 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
28. 148-8355 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9005 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
29. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
30. 148-8411 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
31. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
32. 196-0484 [1] TUBE AS  
33. 1P-3703 [7] SEAL-RECTANGULAR  
34. 1P-4578 [2] FLANGE-HALF  
35. 2M-0849 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
36. 4J-0522 [1] SEAL-O-RING  
37. 4J-5267 [1] SEAL-O-RING  
38. 5K-9090 [2] SEAL-O-RING  
39. 5P-7468 [2] CLIP (SLOT)(USE WITH 52MM OD GROMMET)  
  5P-7469 [2] CLIP (TAB)(USE WITH 52MM OD GROMMET)  
  6V-0545 [2] GROMMET (52MM OD)  
    -OR-
  5P-7470 [2] CLIP (SLOT)(USE WITH 65OD GROMMET)  
  5P-7471 [2] CLIP (TAB)(USE WITH 65OD GROMMET)  
  5P-8182 [2] GROMMET (46-MM ID)(65MM OD)  
40. 8T-5092 M [8] BOLT (M12X1.75X150-MM)  
41. 8T-4956 CM [19] BOLT (M12X1.75X35-MM)  
42. 8T-4223 C [40] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
44. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
45. 6V-9746 [1] SEAL-O-RING  
46. 7Y-3731 [1] FLANGE  
47. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4139 CM [9] BOLT (M12X1.75X30-MM)  
49. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490637
 

192-6866: LINES GP-FRONT

192-6866 LINES GP-FRONT -2-PUMP, 1-WAY
S/N CAP1135-UP; CGZ504-UP
PART OF 193-6373 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02628971 SEBP3149
1926866 LINES GP-FRONT Parts scheme 1926866 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-4282 M [4] BOLT-SOCKET HEAD (M10X1.5X100-MM)  
2. 133-5773 I [1] HOSE AS  
3. 142-7781 [1] BLOCK  
4. 177-2653 Y [1] VALVE GP-RELIEF (LINE)(LINE, WORK TOOL)  
5. 187-5853 [1] BLOCK  
6. 187-5854 [1] BLOCK  
7. 187-5855 [1] FLANGE  
8. 199-1828 I [1] HOSE AS  
9. 204-8318 [1] SUPPORT AS  
10. 204-8319 [1] SUPPORT AS  
11. 204-8320 I [1] HOSE AS  
12. 207-6430 [1] TUBE AS  
13. 207-6443 I [1] HOSE AS  
14. 212-5148 [2] BLOCK  
15. 212-5567 [2] PLATE  
16. 212-5572 [1] SUPPORT AS  
17. 212-5574 [1] PLATE  
18. 212-5575 [1] PLATE  
19. 218-1005 [1] SUPPORT AS  
20. 218-1139 [1] BLOCK  
21. 227-0509 C [1] SUPPORT AS  
22. 099-8232 [1] SEAL-O-RING  
23. 101-7402 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
24. 101-7404 M [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
25. 148-8334 [1] CONNECTOR AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8T-3611 [1] CONNECTOR  
26. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
27. 148-8347 [1] ELBOW AS  
  6V-9007 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
28. 148-8355 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9005 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
29. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
30. 148-8411 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
31. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
32. 196-0484 [1] TUBE AS  
33. 1P-3703 [7] SEAL-RECTANGULAR  
34. 1P-4578 [2] FLANGE-HALF  
35. 2M-0849 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
36. 4J-0522 [1] SEAL-O-RING  
37. 4J-5267 [1] SEAL-O-RING  
38. 5K-9090 [2] SEAL-O-RING  
39. 5P-7468 [2] CLIP (SLOT)(USE WITH 52MM OD GROMMET)  
  5P-7469 [2] CLIP (TAB)(USE WITH 52MM OD GROMMET)  
  6V-0545 [2] GROMMET (52MM OD)  
    -OR-
  5P-7470 [2] CLIP (SLOT)(USE WITH 65OD GROMMET)  
  5P-7471 [2] CLIP (TAB)(USE WITH 65OD GROMMET)  
  5P-8182 [2] GROMMET (46-MM ID)(65MM OD)  
40. 8T-5092 M [8] BOLT (M12X1.75X150-MM)  
41. 8T-4956 CM [20] BOLT (M12X1.75X35-MM)  
42. 8T-4223 C [41] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
44. 8T-4178 M [4] BOLT (M10X1.5X90-MM)  
45. 6V-9746 [1] SEAL-O-RING  
46. 7Y-3731 [1] FLANGE  
47. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4139 CM [8] BOLT (M12X1.75X30-MM)  
49. 8T-4176 M [4] BOLT (M12X1.75X90-MM)  
50. 227-0511 C [1] PLATE  
51. 8T-5041 CM [1] BOLT (M12X1.75X120-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490638
 

192-6885: LINES GP-FRONT

192-6885 LINES GP-FRONT -SYSTEM 14, COMBINED FUNCTION
S/N CAP1-UP; CGZ1-UP
PART OF 193-6380 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01536104 SEBP3149
1926885 LINES GP-FRONT Parts scheme 1926885 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3479 M [4] BOLT-SOCKET HEAD (M10X1.5X90-MM)  
2. 105-3485 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
3. 108-4282 M [4] BOLT-SOCKET HEAD (M10X1.5X100-MM)  
4. 142-7781 [1] BLOCK  
5. 157-3182 [1] SENSOR AS-PRESSURE (WORK TOOL)  
6. 187-6719 [1] BLOCK  
7. 187-6720 [1] BLOCK  
8. 193-9994 I [1] HOSE AS  
9. 196-0827 [1] PLATE  
10. 199-1762 [1] TUBE AS  
11. 199-1763 I [1] HOSE AS  
12. 199-1828 I [1] HOSE AS  
13. 199-1918 [1] FLANGE  
14. 201-9367 Y [3] VALVE GP-SOLENOID  
15. 204-8183 [1] PLATE  
16. 204-8184 [1] PLATE AS  
17. 204-8318 [1] SUPPORT AS  
18. 204-8319 [1] SUPPORT AS  
19. 204-8320 I [1] HOSE AS  
20. 204-8420 I [1] HOSE AS  
21. 204-8428 I [1] HOSE AS  
22. 204-8439 [1] BLOCK  
23. 207-6430 [1] TUBE AS  
24. 212-5413 [1] SUPPORT AS  
25. 212-5416 [1] PLATE  
26. 212-5499 [1] PLATE  
27. 212-5567 [1] PLATE  
28. 212-5572 [1] SUPPORT AS  
29. 212-5574 [1] PLATE  
30. 212-5575 [1] PLATE  
31. 218-1002 [1] HOSE AS  
32. 218-1005 [1] SUPPORT AS  
33. 099-8232 [2] SEAL-O-RING  
34. 101-7404 M [16] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
35. 148-8317 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6V-8714 [1] CONNECTOR  
36. 148-8334 [1] CONNECTOR AS  
  2S-4078 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8T-3611 [1] CONNECTOR  
37. 148-8335 [3] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
38. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
39. 148-8362 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
40. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
41. 164-4180 [1] PLUG AS  
  7M-8485 [1] SEAL-O-RING  
  9S-4181 [1] PLUG (1-5/16-12-THD)  
42. 165-9629 Y [2] VALVE GP-SOLENOID & RELIEF (LINE)  
43. 196-0484 [1] TUBE AS  
44. 1P-3702 [1] SEAL-RECTANGULAR  
45. 1P-3703 [6] SEAL-RECTANGULAR  
46. 1P-3704 [3] SEAL-RECTANGULAR  
47. 1P-4578 [2] FLANGE-HALF  
48. 204-8182 [2] GROMMET  
49. 2M-0849 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
50. 4J-0522 [1] SEAL-O-RING  
51. 4J-5267 [1] SEAL-O-RING  
52. 5K-9090 [3] SEAL-O-RING  
53. 5P-7468 B [2] CLIP (SLOT)  
54. 5P-7469 B [2] CLIP (TAB)  
55. 5P-7470 B [2] CLIP (SLOT)  
56. 5P-7471 B [2] CLIP (TAB)  
57. 5P-8182 B [2] GROMMET (46-MM ID)  
58. 6V-0545 B [2] GROMMET  
59. 6V-9746 [3] SEAL-O-RING  
60. 7Y-3729 [1] FLANGE-SPECIAL  
61. 7Y-3731 [1] FLANGE  
62. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
63. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
64. 8T-4176 M [8] BOLT (M12X1.75X90-MM)  
65. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
66. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
67. 8T-4223 [51] WASHER-HARD (13.5X25.5X3-MM THK)  
68. 8T-4956 M [20] BOLT (M12X1.75X35-MM)  
69. 8T-5001 M [1] BOLT (M12X1.75X130-MM)  
70. 8T-5005 M [3] BOLT (M10X1.5X70-MM)  
71. 8T-5092 M [4] BOLT (M12X1.75X150-MM)  
72. 8T-5412 M [4] BOLT (M12X1.75X140-MM)  
73. 8T-7929 M [4] BOLT (M12X1.75X180-MM)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31490639
 

192-6886: LINES GP-FRONT

192-6886 LINES GP-FRONT -MEDIUM PRESSURE
S/N CAP1-UP; CGZ1-UP
PART OF 193-6380, 200-6666 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01528670 SEBP3149
1926886 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 330C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-9404 [2] CLIP  
2. 196-0610 [1] TUBE AS  
3. 196-0611 [1] TUBE AS  
4. 196-0658 I [2] HOSE AS  
5. 204-8268 [1] SUPPORT AS  
6. 101-7404 M [8] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
7. 4J-0520 [2] SEAL-O-RING  
8. 6V-8398 [2] SEAL-O-RING  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
11. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
12. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 330C L :

LINES GP-COUPLER
230-3410 LINES GP-COUPLER
LINES GP-COUPLER
230-3410 LINES GP-COUPLER
LINES GP-COUPLER
226-4830 LINES GP-COUPLER
LINES GP-COUPLER
210-1930 LINES GP-COUPLER
LINES GP-COUPLER
210-1930 LINES GP-COUPLER
LINES GP-COUPLER
210-1930 LINES GP-COUPLER
LINES GP-COUPLER
210-1928 LINES GP-COUPLER
LINES GP-COUPLER
207-4108 LINES GP-COUPLER
LINES GP-FRONT
192-6851 LINES GP-FRONT
LINES GP-FRONT
192-6851 LINES GP-FRONT
LINES GP-FRONT
192-6851 LINES GP-FRONT
LINES GP-FRONT
192-6866 LINES GP-FRONT
LINES GP-FRONT
192-6866 LINES GP-FRONT
LINES GP-FRONT
192-6866 LINES GP-FRONT
LINES GP-FRONT
192-6866 LINES GP-FRONT
LINES GP-FRONT
192-6885 LINES GP-FRONT

Truck sale:

 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
 
 
Caterpillar 330C L
- Crawler Excavators
MADISA
Caterpillar 330CL, Crawler Excavators, Construction
55,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
BLANCHARD MACHINERY CO.
Caterpillar 330CL, Crawler Excavators, Construction
48,000 
Caterpillar 330CL, Crawler Excavators, Construction
- Crawler Excavators
MILTON CAT
Caterpillar 330CL
 
Caterpillar 330CL
- Crawler Excavators
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.