HYDRAULIC SYSTEM
BLOCK GPFILTER GP
COOLING SYSTEM
FAN GPHYDRAULIC SYSTEM
COOLER GPCOUPLING GP
CYLINDER GP
HYDRAULIC SYSTEM
BLOCK GP
#SEBP31530320
173-3503: BLOCK GP-HYDRAULIC
173-3503 BLOCK GP-HYDRAULIC
S/N BTD1-UP; AMH1-UP
PART OF 158-9005, 188-4140 FILTER GP-OIL
S/N BTD1-UP; AMH1-UP
PART OF 158-9005, 188-4140 FILTER GP-OIL
For full view, you need register
Parts for your 325C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 204-2763 | [1] | BLOCK | |
| 2. | 5L-4758 | [1] | SEAL-O-RING | |
| 3. | 177-2619 | [2] | PACKING | |
| 4. | 173-3505 | [1] | PLATE-SLIDE | |
| 5. | 137-3631 | [1] | PACKING | |
| 6. | 137-3626 M | [1] | BOLT-SPECIAL (M6X1X23.25-MM) | |
| 7. | 173-3506 | [1] | PLUG AS | |
| 8. | 3J-1907 | [1] | SEAL-O-RING | |
| 9. | 7Y-5272 | [2] | PIN-SPRING | |
| 10. | 137-3628 | [1] | SHIM (0.1-MM THK) | |
| M | METRIC PART | |||
#SEBP31530321
128-2682: BREATHER GP
For full view, you need register
#SEBP31530322
183-8089: COOLER & MTG GP-HYDRAULIC OIL
183-8089 COOLER & MTG GP-HYDRAULIC OIL
S/N BTD1-196; AMH1-300
PART OF 178-6643 INSTALLATION AR-ENGINE
S/N BTD1-196; AMH1-300
PART OF 178-6643 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 325C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 204-0936 Y | [1] | COOLER GP-HYDRAULIC OIL | |
| 2. | 190-5810 | [1] | FAN AS (6-BLADE) | |
| 3. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 4. | 7X-7729 | [10] | WASHER (11X25X3-MM THK) | |
| 5. | 183-8203 | [2] | GUARD AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 190-5813 | [1] | SUPPORT AS | |
| 7. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 8. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 179-9778 Y | [1] | MOTOR GP-PISTON | |
| 10. | 190-5818 | [1] | ADAPTER | |
| 11. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 12. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 13. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 14. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 18. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 19. | 196-8240 | [1] | LINER | |
| 20. | 199-0420 | [1] | LINER | |
| 21. | 203-5012 | [1] | LINER | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31530323
183-8089: COOLER & MTG GP-HYDRAULIC OIL
183-8089 COOLER & MTG GP-HYDRAULIC OIL
S/N BTD197-UP; AMH301-UP
PART OF 178-6643 INSTALLATION AR-ENGINE
S/N BTD197-UP; AMH301-UP
PART OF 178-6643 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 325C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 204-0936 Y | [1] | COOLER GP-HYDRAULIC OIL | |
| 2. | 190-5810 | [1] | FAN AS (6-BLADE) | |
| 3. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 4. | 7X-7729 | [10] | WASHER (11X25X3-MM THK) | |
| 5. | 183-8203 | [2] | GUARD AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 190-5813 | [1] | SUPPORT AS | |
| 7. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 8. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 179-9778 Y | [1] | MOTOR GP-PISTON | |
| 10. | 190-5818 | [1] | ADAPTER | |
| 11. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 12. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 13. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 14. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 15. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 18. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 19. | 196-8240 | [1] | LINER | |
| 20. | 223-3081 C | [1] | LINER | |
| 21. | 203-5012 | [1] | LINER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31530324
201-3794: COOLER & MTG GP-HYDRAULIC OIL
201-3794 COOLER & MTG GP-HYDRAULIC OIL
S/N BTD211-342
PART OF 193-6801 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
S/N BTD211-342
PART OF 193-6801 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 204-0995 Y | [1] | COOLER GP-HYDRAULIC OIL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31530325
204-0936: COOLER GP-HYDRAULIC OIL
204-0936 COOLER GP-HYDRAULIC OIL
S/N BTD1-UP; AMH1-UP
PART OF 183-8089 COOLER & MTG GP-HYDRAULIC OIL
S/N BTD1-UP; AMH1-UP
PART OF 183-8089 COOLER & MTG GP-HYDRAULIC OIL
For full view, you need register
Parts for your 325C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 2. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 3. | 204-0892 | [1] | SHROUD AS | |
| 4. | 204-0894 | [2] | SEAL | |
| 5. | 204-0893 | [2] | SUPPORT AS | |
| 6. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 7. | 196-8154 | [2] | SEAL | |
| 8. | 204-0890 | [1] | CORE AS-OIL COOLER | |
| 9. | 204-0937 | [1] | FRAME AS | |
| 10. | 201-3820 | [1] | SCREEN AS | |
| 11. | 201-3821 | [2] | SUPPORT AS | |
| 12. | 201-3822 | [2] | SUPPORT AS | |
| 13. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-4908 M | [8] | BOLT (M8X1.25X25-MM) | |
| 15. | 096-4034 M | [2] | BOLT-WING (M6X1X15-MM) | |
| M | METRIC PART | |||
#SEBP31530326
204-0995: COOLER GP-HYDRAULIC OIL
204-0995 COOLER GP-HYDRAULIC OIL
S/N BTD211-342
PART OF 201-3794 COOLER & MTG GP-HYDRAULIC OIL
AN ATTACHMENT
S/N BTD211-342
PART OF 201-3794 COOLER & MTG GP-HYDRAULIC OIL
AN ATTACHMENT
For full view, you need register
Parts for your 325C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-8159 | [2] | PIN AS | |
| 2. | 204-0892 | [1] | SHROUD AS | |
| 3. | 205-4962 | [1] | CORE AS (OIL COOLER) | |
| 4. | 216-3665 | [1] | SCREEN AS | |
| 5. | 227-9945 | [2] | SUPPORT AS | |
| 6. | 227-9946 | [2] | SEAL | |
| 7. | 227-9947 | [2] | SEAL | |
| 8. | 227-9948 | [1] | FRAME AS | |
| 9. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP31530327
171-9104: COUPLING GP-PUMP
171-9104 COUPLING GP-PUMP
S/N BTD1-UP; AMH1-UP
PART OF 178-6641 PUMP & MTG GP-MAIN HYDRAULIC
S/N BTD1-UP; AMH1-UP
PART OF 178-6641 PUMP & MTG GP-MAIN HYDRAULIC
For full view, you need register
#SEBP31530328
239-6598: COUPLING GP-PUMP
239-6598 COUPLING GP-PUMP
S/N BTD204-UP; AMH474-UP
PART OF 178-6641 PUMP & MTG GP-MAIN HYDRAULIC
S/N BTD204-UP; AMH474-UP
PART OF 178-6641 PUMP & MTG GP-MAIN HYDRAULIC
For full view, you need register
#SEBP31530329
179-9787: CYLINDER & LINES GP-BOOM
179-9787 CYLINDER & LINES GP-BOOM -LH
S/N BTD1-UP; AMH1-UP
PART OF 176-2776 BOOM AR, 176-2774 BOOM AR-1 PIECE LONG
AN ATTACHMENT
S/N BTD1-UP; AMH1-UP
PART OF 176-2776 BOOM AR, 176-2774 BOOM AR-1 PIECE LONG
AN ATTACHMENT
For full view, you need register
Information:
Caterpillar Parts SIS Catalog 325C :
Truck sale:
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
- Crawler excavators
WESTERN STATES EQUIPMENT
270,965