LUBRICATION SYSTEM
LINES GP-ENGINE OILAIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPLUBRICATION SYSTEM
GAUGE GP-OIL LEVEL (DIPSTICK)OIL CHANGE GP-HIGH SPEED
PUMP GP-ENGINE OIL
COOLING SYSTEM
COOLING GPFAN GP
LUBRICATION SYSTEM
LINES GP-ENGINE OIL
#SEBP31540090
160-6894: LINES GP-ENGINE OIL
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-6471 | [1] | SCREEN AS (ENGINE OIL) | |
| 3T-6469 | [1] | WASHER (19X26X1.6-MM THK) | ||
| 2. | 4N-8410 | [1] | TUBE-COOLER BYPASS | |
| 3. | 4P-7373 | [1] | TUBE AS | |
| 4. | 7E-4509 | [1] | TUBE AS | |
| 5. | 7E-5142 | [1] | CONNECTOR | |
| 7. | 9Y-5373 | [1] | ELBOW | |
| 8. | 255-1257 I | [1] | HOSE AS | |
| 9. | 292-9782 C | [1] | BRACKET | |
| 10. | 292-9783 C | [1] | TUBE AS | |
| 11. | 353-5104 | [1] | TEE AS | |
| 030-7955 | [1] | TEE-FLARED | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 12. | 353-5105 | [1] | ADAPTER AS | |
| 030-8194 | [1] | CONNECTOR | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 13. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 14. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 15. | 0S-1590 | [4] | BOLT (3/8-16X2-IN) | |
| 16. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 17. | 5P-5846 | [1] | SEAL-O-RING | |
| 18. | 109-0076 | [1] | SEAL-O-RING | |
| 19. | 5P-8068 | [2] | SEAL-O-RING | |
| 20. | 114-2687 | [3] | SEAL-O-RING | |
| 21. | 2K-4973 C | [2] | LOCKNUT (3/8-16-THD) | |
| 23. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 25. | 6V-5134 | [1] | SEAL-O-RING | |
| 26. | 9X-6458 C | [5] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP31540091
151-6662: LINES GP-ENGINE OIL DRAIN
151-6662 LINES GP-ENGINE OIL DRAIN
S/N BKF1-UP; BLY1-UP
PART OF 151-6650 INSTALLATION AR-ENGINE
S/N BKF1-UP; BLY1-UP
PART OF 151-6650 INSTALLATION AR-ENGINE
For full view, you need register
#SEBP31540092
187-6659: LINES GP-TURBOCHARGER OIL
187-6659 LINES GP-TURBOCHARGER OIL
S/N BLC1-UP
PART OF 160-6900 ENGINE AR-COMPLETE
S/N BLC1-UP
PART OF 160-6900 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-7559 | [1] | GASKET | |
| 2. | 106-3544 | [1] | ELBOW | |
| 3. | 6V-8626 | [1] | ELBOW | |
| 3A. | 136-7226 | [1] | SEAL-O-RING | |
| 3B. | 136-7227 | [1] | SEAL-O-RING | |
| 4. | 192-5462 | [1] | TUBE AS-OIL | |
| 5. | 192-5464 | [1] | TUBE AS-OIL | |
| 6. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 7. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 8. | 114-2687 | [1] | SEAL-O-RING | |
| 9. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 10. | 6V-5266 | [1] | SEAL-O-RING | |
| 11. | 7N-8875 | [1] | GASKET | |
| 12. | 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP31540093
170-3562: MOUNTING GP-OIL LEVEL GAUGE
170-3562 MOUNTING GP-OIL LEVEL GAUGE
S/N BLC1-UP
PART OF 160-6900 ENGINE AR-COMPLETE
S/N BLC1-UP
PART OF 160-6900 ENGINE AR-COMPLETE
For full view, you need register
#SEBP31540094
201-3825: OIL CHANGE GP-HIGH SPEED
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-3826 | [1] | SUPPORT AS | |
| 2. | 9S-9272 | [1] | CAP AS | |
| 3. | 1P-7919 | [1] | COUPLER-MALE | |
| 4. | 6K-8420 | [1] | LOCKNUT (1-1/16-12-THD) | |
| 5. | 031-4564 I | [1] | HOSE AS | |
| 6. | 2P-8511 | [1] | ELBOW-FLARED | |
| 7. | 5P-1075 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP31540095
201-3825: OIL CHANGE GP-HIGH SPEED
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-3826 | [1] | SUPPORT AS | |
| 2. | 9S-9272 | [1] | CAP AS | |
| 3. | 1P-7919 | [1] | COUPLER-MALE | |
| 4. | 6K-8420 | [1] | LOCKNUT (1-1/16-12-THD) | |
| 5. | 031-4564 I | [1] | HOSE AS | |
| 6. | 3B-0551 C | [1] | PLUG-PIPE | |
| 7. | 5P-1075 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 9. | 6V-3830 | [1] | SEAL-O-RING | |
| 10. | 310-9508 | [1] | ADAPTER | |
| 11. | 8T-4835 | [1] | BOLT (1/2-13X2-IN) | |
| 12. | 8T-4223 C | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8B-3410 C | [1] | GASKET | |
| 14. | 222-8210 C | [1] | CONNECTOR | |
| 15. | 8T-8920 C | [1] | BOLT (1/2-13X3.25-IN) | |
| 16. | 145-5181 | [1] | SPACER (13.5X25X12-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP31540096
198-1508: PUMP GP-ENGINE OIL
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-0513 | [1] | BODY AS-OIL PUMP | |
| 7N-2156 | [2] | BUSHING | ||
| 8M-8489 | [2] | DOWEL | ||
| 2. | 1M-0644 | [2] | BOLT (3/8-16X2.25-IN) | |
| 3. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 5. | 9Y-1792 | [1] | RETAINER | |
| 6. | 2S-2760 | [1] | SPRING | |
| 7. | 6N-1931 | [1] | PLUNGER | |
| 8. | 162-2679 | [1] | SHAFT AS-PUMP | |
| 9. | 162-2682 | [1] | SHAFT AS-PUMP | |
| 10. | 4N-5339 | [1] | SPACER AS-OIL PUMP | |
| 7N-2155 | [2] | BUSHING | ||
| 11. | 4N-0587 | [1] | BODY AS-PUMP | |
| 7N-2213 | [2] | BUSHING | ||
| 12. | 7W-6529 | [1] | GEAR (8-TEETH) | |
| 13. | 7W-7142 | [1] | GEAR (8-TEETH) |
#SEBP31540097
198-1508: PUMP GP-ENGINE OIL
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-2760 | [1] | SPRING | |
| 2. | 4N-5339 | [1] | SPACER AS-OIL PUMP | |
| 3. | 6N-1931 | [1] | PLUNGER | |
| 4. | 6N-2343 | [1] | BODY AS-PUMP | |
| 5. | 7W-6528 | [1] | GEAR-PUMP (8-TEETH) | |
| 6. | 7W-7141 | [1] | GEAR-PUMP (8-TEETH) | |
| 7. | 9Y-1792 | [1] | RETAINER | |
| 8. | 145-8503 | [1] | SHAFT AS-IDLER | |
| 9. | 202-3572 | [1] | SHAFT AS-DRIVE | |
| 10. | 235-1587 | [1] | BODY AS | |
| 10A. | 8M-8489 | [2] | DOWEL | |
| 10B. | 2S-7905 | [1] | PLUG-PIPE | |
| 10C. | 7N-2156 | [2] | BUSHING | |
| 11. | 1M-0644 | [2] | BOLT (3/8-16X2.25-IN) | |
| 13. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP31540098
202-2973: COOLING AR
For full view, you need register
#SEBP31540099
151-6652: FAN GP-SUCTION
For full view, you need register
Parts for your 385B EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 162-6356 | [2] | GUARD AS | |
| 2. | 209-6058 Y | [1] | MOTOR GP-PISTON | |
| 3. | 7X-2552 M | [6] | BOLT (M16X2X30-MM) | |
| 4. | 7X-0515 | [22] | WASHER-HARD (17X35X5-MM THK) | |
| 5. | 139-8878 | [1] | SPIDER AS (8-BLADE) | |
| 6. | 171-8989 | [1] | SUPPORT AS-FAN (RH) | |
| 7. | 171-8996 | [1] | SUPPORT AS-FAN (RADIATOR) | |
| 8. | 171-8983 | [1] | SUPPORT AS-FAN (LH) | |
| 9. | 8T-4195 M | [10] | BOLT (M10X1.5X30-MM) | |
| 10. | 7X-7729 | [20] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-4139 M | [3] | BOLT (M12X1.75X30-MM) | |
| 12. | 139-8733 | [1] | ADAPTER-FAN | |
| 13. | 200-3313 Y | [1] | DRIVE GP-FAN | |
| 14. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 15. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4196 M | [8] | BOLT (M10X1.5X35-MM) | |
| 17. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 139-8753 | [1] | LOCKWASHER | |
| 19. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| 20. | 8T-4140 M | [4] | BOLT (M16X2X60-MM) | |
| 21. | 8T-4132 M | [6] | NUT (M16X2-THD) | |
| 22. | 8T-4183 M | [6] | BOLT (M12X1.75X40-MM) | |
| 23. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 24. | 136-4182 M | [2] | BOLT (M16X2X100-MM) | |
| 25. | 171-8995 | [1] | SUPPORT AS-FAN (RH) | |
| 26. | 171-8991 | [1] | SUPPORT AS-FAN (LH) | |
| 27. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 28. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 29. | 162-6357 | [2] | PLATE | |
| 30. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 31. | 4M-0189 | [1] | SEAL-O-RING (104.37MM ID) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
