WORK TOOLS
BLADE GPWORK TOOLS
BLADE GP
#SEBP31730010
253-8690: BLADE AS-UNIVERSAL
253-8690 BLADE AS-UNIVERSAL
S/N ATJ1-UP; AMK1-UP
10.1-CU M (13.25-CU YD)
PART OF 253-8688, 377-2210 BLADE GP-SEMI-UNIVERSAL
S/N ATJ1-UP; AMK1-UP
10.1-CU M (13.25-CU YD)
PART OF 253-8688, 377-2210 BLADE GP-SEMI-UNIVERSAL
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-9694 | [6] | BOSS | |
| 2. | 123-9299 | [1] | BRACKET AS (CENTER) | |
| 2A. | 9J-0123 | [1] | TRUNNION | |
| 3. | 129-5082 | [8] | BLOCK | |
| 4. | 153-6975 | [2] | BAR-CUTTER | |
| 5. | [1] | PLATE (LH) | ||
| 6. | 253-8691 | [1] | BRACKET AS (RH) | |
| 6A. | 5J-6180 | [1] | TRUNNION | |
| 7. | 253-8692 | [1] | BRACKET AS (LH) | |
| 7A. | 5J-6180 | [1] | TRUNNION | |
| 8. | [1] | PLATE (RH) | ||
| 9. | 285-3254 | [1] | PLATE (PROTECTOR) | |
| 10. | 253-8743 | [2] | PLATE-WEAR | |
| 11. | 254-9974 | [2] | PLATE-SIDE WEAR | |
| 12. | 253-8717 | [1] | PLATE-EDGE (CENTER) | |
| 13. | 253-8718 | [2] | PLATE-EDGE (SIDE) | |
| 14. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
#SEBP31730011
417-0440: BLADE AS-UNIVERSAL
417-0440 BLADE AS-UNIVERSAL
PART OF 415-1797 BLADE GP-UNIVERSAL
PART OF 415-1797 BLADE GP-UNIVERSAL
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 2. | 9J-6058 | [1] | DEFLECTOR | |
| 3. | 9J-6067 | [1] | TRUNNION | |
| 4. | 129-5081 | [8] | BLOCK | |
| 5. | 270-3777 | [1] | BRACKET AS | |
| 5A. | 3G-8052 | [2] | BEARING | |
| 6. | 193-9158 | [8] | BOSS (7/8-9X2.75-IN) | |
| 7. | 270-3748 | [1] | MOLDBOARD | |
| 8. | 270-3749 | [1] | MOLDBOARD | |
| 9. | 270-3750 | [1] | MOLDBOARD | |
| 10. | 270-3751 | [1] | MOLDBOARD | |
| 11. | 270-3755 | [2] | PLATE-WEAR | |
| 12. | 270-3776 | [1] | BRACKET AS | |
| 12A. | 3G-8052 | [2] | BEARING | |
| 13. | 270-3754 | [2] | PLATE |
#SEBP31730012
432-7420: BLADE AS-UNIVERSAL
432-7420 BLADE AS-UNIVERSAL
PART OF 426-0896 BLADE GP-UNIVERSAL
PART OF 426-0896 BLADE GP-UNIVERSAL
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 2. | 125-3536 | [1] | GUARD | |
| 3. | 129-5082 | [8] | BLOCK | |
| 4. | 171-4810 | [2] | HOLDER AS | |
| 5. | 302-3974 | [2] | PLATE | |
| 6. | 329-1124 | [1] | EDGE | |
| 7. | 329-1125 | [2] | EDGE | |
| 8. | 418-4636 | [1] | BRACKET AS | |
| 8A. | 9J-0123 | [1] | TRUNNION | |
| 9. | 432-7421 | [1] | BRACKET AS (RH) | |
| 9A. | 1U-0738 | [2] | BUSHING | |
| 10. | 432-7422 | [1] | BRACKET AS (LH) | |
| 10A. | 1U-0738 | [2] | BUSHING | |
| 11. | 7J-5131 | [2] | TRUNNION | |
| 12. | 285-3254 | [1] | PLATE (PROTECTOR) |
#SEBP31730013
433-6850: BLADE AS-UNIVERSAL
433-6850 BLADE AS-UNIVERSAL
S/N ATJ1-UP; AMK1-UP
PART OF 398-1101 BLADE GP-UNIVERSAL
S/N ATJ1-UP; AMK1-UP
PART OF 398-1101 BLADE GP-UNIVERSAL
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 2. | 7J-5131 | [2] | TRUNNION | |
| 3. | 117-9694 | [6] | BOSS | |
| 4. | 125-3536 | [1] | GUARD | |
| 5. | 129-5082 | [8] | BLOCK | |
| 6. | 241-9308 | [2] | PLATE-EDGE SUPPORT | |
| 7. | 174-4975 | [1] | PLATE | |
| 8. | 241-9303 | [1] | PLATE-EDGE SUPPORT | |
| 9. | 259-5731 | [2] | PLATE-WEAR | |
| 10. | 259-5732 | [2] | BAR-WEAR | |
| 11. | 9J-0123 | [1] | TRUNNION | |
| 12. | 1U-0738 | [4] | BUSHING |
#SEBP31730014
163-3967: BLADE GP-ANGLING
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-4817 | [2] | PIN | |
| 2. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 3. | 104-7434 | [2] | RETAINER | |
| 4. | 3G-8932 | [2] | PIN | |
| 5. | 4T-0231 | [2] | RETAINER | |
| 6. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 7. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 134-2733 | [1] | BEARING-SELF-ALIGNING | |
| 9. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 10. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 11. | 8J-8905 | [1] | RING-LOCK | |
| M | METRIC PART | |||
#SEBP31730015
152-1353: BLADE GP-BULLDOZER
152-1353 BLADE GP-BULLDOZER
S/N ATJ1-UP; AMK1-UP
FOR USE WITH MOTOR GRADER EQUIPPED WITH HYDRAULIC LIFT
S/N ATJ1-UP; AMK1-UP
FOR USE WITH MOTOR GRADER EQUIPPED WITH HYDRAULIC LIFT
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4610 | [4] | BOLT (3/4-10X3.25-IN) | |
| 2. | 4T-3028 | [3] | EDGE-CUTTING | |
| 3. | 4T-3051 | [1] | BIT-END (RH) | |
| 4. | 4T-3052 | [1] | BIT-END (LH) | |
| 5. | 137-4234 | [1] | PLATE-IDENTIFICATION (WORK TOOL) | |
| 6. | 171-4808 | [2] | BASE AS | |
| 7. | 173-1172 | [2] | SHOE AS | |
| 8. | 179-1633 | [2] | PIN | |
| 9. | 258-4500 Y | [1] | BLADE GP-BULLDOZER (STRAIGHT BLADE) | |
| 10. | 1K-6870 | [4] | LOCKNUT (3/4-10-THD) | |
| 11. | 3B-5301 | [4] | PIN-COTTER | |
| 12. | 3F-5108 | [24] | BOLT-PLOW (5/8-11X2.25-IN) | |
| 13. | 4K-0367 | [24] | NUT-FULL (5/8-11-THD) | |
| 14. | 5P-8248 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 15. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31730016
258-4500: BLADE GP-BULLDOZER
258-4500 BLADE GP-BULLDOZER
S/N ATJ1-UP; AMK1-UP
PART OF 152-1353 BLADE GP-BULLDOZER
S/N ATJ1-UP; AMK1-UP
PART OF 152-1353 BLADE GP-BULLDOZER
For full view, you need register
#SEBP31730017
158-4533: BLADE GP-SEMI-UNIVERSAL
158-4533 BLADE GP-SEMI-UNIVERSAL
HEAVY DUTY
HEAVY DUTY
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-6973 | [4] | TUBE AS | |
| 2. | 0S-1588 | [16] | BOLT (3/8-16X1.25-IN) | |
| 3. | 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 4J-5267 | [4] | SEAL-O-RING | |
| 5. | 153-6974 | [4] | PLATE-CLAMP TOP | |
| 6. | 0S-1571 | [4] | BOLT (3/8-16X1.75-IN) | |
| 7. | 177-1744 | [8] | PLATE | |
| 8. | 9W-6092 | [2] | EDGE-CUTTING | |
| 9. | 7T-9125 | [2] | EDGE-CUTTING | |
| 10. | 8E-4196 | [1] | BIT-END (LH) | |
| 11. | 8E-4197 | [1] | BIT-END (RH) | |
| 12. | Y | [1] | BLADE AS-SEMI-UNIVERSAL | |
| 13. | 0S-0509 | [32] | BOLT (3/8-16X0.75-IN) | |
| 14. | 4J-8996 | [8] | SEAL-O-RING | |
| 15. | 3R-2299 | [21] | BOLT (1-1/4-7X3-IN) | |
| 16. | 3K-9770 | [21] | NUT-FULL (1-1/4-7-THD) | |
| 17. | 4K-0684 | [21] | WASHER-HARD (34X55X6-MM THK) | |
| 18. | 135-9668 | [3] | SOLE | |
| 19. | 9W-4500 | [1] | EDGE-CUTTING (CENTER) | |
| 20. | 4J-9058 | [43] | BOLT-PLOW (1-8X3.25-IN) | |
| 21. | 2J-3507 | [43] | NUT-FULL (1-8-THD) | |
| 22. | 5P-8250 | [43] | WASHER (28X49X5-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31730018
253-8688: BLADE GP-SEMI-UNIVERSAL
253-8688 BLADE GP-SEMI-UNIVERSAL
S/N ATJ1-UP; AMK1-UP
10.1-CU M (13.25-CU YD)
S/N ATJ1-UP; AMK1-UP
10.1-CU M (13.25-CU YD)
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-9770 | [14] | NUT-FULL (1-1/4-7-THD) | |
| 2. | 3R-2299 | [14] | BOLT (1-1/4-7X3-IN) | |
| 3. | 6J-6604 | [1] | PIN | |
| 4. | 6J-8570 | [1] | RETAINER | |
| 5. | 331-5827 | [2] | EDGE-CUTTING | |
| 6. | 8E-4193 | [1] | BIT-END (RH) | |
| 7. | 8E-4194 | [1] | BIT-END (LH) | |
| 8. | 135-9668 | [2] | SOLE | |
| 10. | 253-8689 | [2] | PLATE | |
| 11. | 253-8690 Y | [1] | BLADE AS-UNIVERSAL | |
| 12. | 2J-3507 | [38] | NUT-FULL (1-8-THD) | |
| 13. | 4F-4042 | [38] | BOLT-PLOW (1-8X3-IN) | |
| 14. | 4K-0684 | [14] | WASHER-HARD (34X55X6-MM THK) | |
| 15. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 5P-8250 | [38] | WASHER (28X49X5-MM THK) | |
| 18. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 19. | 8T-5460 M | [2] | BOLT (M20X2.5X40-MM) | |
| 20. | 9W-4500 | [2] | EDGE-CUTTING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31730019
265-5606: BLADE GP-SEMI-UNIVERSAL
For full view, you need register
Parts for your 834G BLADE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 393-7858 | [1] | BIT-END (RH) | |
| 2. | 393-7859 | [1] | BIT-END (LH) | |
| 3. | 3R-2299 | [14] | BOLT (1-1/4-7X3-IN) | |
| 4. | 4T-2992 | [2] | EDGE-CUTTING | |
| 5. | 4T-8797 | [2] | EDGE-CUTTING | |
| 6. | 6J-6604 | [1] | PIN | |
| 7. | 6J-8570 | [1] | RETAINER | |
| 8. | 135-9668 | [2] | SOLE | |
| 9. | 137-4234 | [1] | PLATE-IDENTIFICATION (WORK TOOL) | |
| 10. | 265-5607 Y | [1] | BLADE AS-SEMI-UNIVERSAL | |
| 11. | 278-4518 | [2] | PLATE | |
| 12. | 2J-3505 | [36] | NUT-FULL (7/8-9-THD) | |
| 13. | 3K-9770 | [14] | NUT-FULL (1-1/4-7-THD) | |
| 14. | 4K-0684 | [14] | WASHER-HARD (34X55X6-MM THK) | |
| 15. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 5P-8249 | [36] | WASHER-HARD (24X41.5X4-MM THK) | |
| 17. | 6F-0196 | [36] | BOLT-PLOW (7/8-9X2.75-IN) | |
| 18. | 8T-4123 | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 19. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 20. | 8T-5460 M | [2] | BOLT (M20X2.5X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
