ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
DRIVE GP-FINALPOWER TRAIN AR
SPROCKET GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP31810220
170-6850: WIRING GP-REFUELING PUMP
170-6850 WIRING GP-REFUELING PUMP
S/N DET1-UP
PART OF 158-0073 PUMP AR-REFUELING
Type 2
AN ATTACHMENT
S/N DET1-UP
PART OF 158-0073 PUMP AR-REFUELING
Type 2
AN ATTACHMENT
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 9X-8256 C | [2] | WASHER (6.6X12X2-MM THK) | |
| 3. | 111-4836 | [3] | CLIP | |
| 4. | 8T-0328 C | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 5. | 116-0095 | [1] | SWITCH AS (REFUELING PUMP START) | |
| 3K-0835 | [1] | NUT (5/8-24-THD) | ||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8748 | [1] | ADAPTER-MOUNT | ||
| 6. | 116-0097 | [1] | SWITCH AS (REFUELING PUMP STOP) | |
| 155-2270 | KIT-CONNECTING PLUG (2-PIN) | |||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4171 CM | [2] | BOLT (M6X1X12-MM) | |
| 9. | 116-0118 C | [3] | CLIP | |
| 10. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 11. | 132-1827 | [1] | WIRE AS | |
| 12. | 149-5050 | [2] | RELAY (24-VOLT)(REFUELING POWER RELAY) | |
| 13. | 213-0772 C | [1] | SWITCH AS-MAGNETIC (24-VOLT)(REFUELING LEVEL SWITCH) | |
| 14. | 238-2344 C | [1] | HARNESS AS-PUMP | |
| 149-5051 | [2] | CONNECTOR-RECEPTACLE | ||
| 121-1038 | [1] | HOUSING-RECEPTACLE | ||
| 116-0126 | [1] | HOUSING-PLUG | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 15. | 9X-3495 | [2] | CLIP AS | |
| 16. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 17. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 5C-5302 CM | [2] | SCREW (M5X0.8X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP31810221
117-2760: WIRING GP-UNIT INJECTOR
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-9537 | [1] | HARNESS AS-WIRING (UNIT INJECTOR) | |
| 103-8133 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 2V-3216 | [4] | CLIP | |
| 3. | 7X-2468 | [3] | CLIP | |
| 4. | 7E-6508 | [6] | CAP AS | |
| 5. | 6V-8214 M | [9] | BOLT (M6X1X20-MM) | |
| 6. | 5P-0537 | [9] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
#SEBP31810222
143-6816: WIRING GP-WORK TOOL
143-6816 WIRING GP-WORK TOOL
S/N DET1-UP
PART OF 230-1306 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N DET1-UP
PART OF 230-1306 CONTROL AR-AUXILIARY
AN ATTACHMENT
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-5561 | [1] | HARNESS AS | |
| 2. | 144-2177 | [1] | HARNESS AS | |
| 3. | 145-7213 | [1] | HARNESS AS | |
| 4. | 111-4787 | [1] | SWITCH AS-ROCKER (HYDRAULIC FLOW MODE) | |
| 116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
| 116-0174 | [4] | TERMINAL | ||
| 5. | 4D-1836 | [1] | SWITCH-TOGGLE | |
| 6. | 116-0118 | [2] | CLIP | |
| 7. | 7X-2621 M | [1] | BOLT (M10X1.5X12-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 3S-2093 B | [45] | STRAP-CABLE | |
| 10. | 143-3421 | [1] | INDICATOR | |
| 11. | 111-4837 | [1] | CLIP | |
| 12. | 170-8976 | [1] | FILM-INSTRUCTION | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP31810223
169-5543: DRIVE GP-FINAL
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP31810224
169-5543: DRIVE GP-FINAL
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP31810225
200-3488: DRIVE GP-FINAL
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 200-3502 Y | [1] | DRIVE GP-FINAL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31810226
200-3502: DRIVE GP-FINAL
200-3502 DRIVE GP-FINAL
S/N DET1-UP
WITHOUT MOTOR
PART OF 169-5543, 200-3488 DRIVE GP-FINAL
S/N DET1-UP
WITHOUT MOTOR
PART OF 169-5543, 200-3488 DRIVE GP-FINAL
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 200-3489 | [1] | HOUSING-MOTOR | |
| 2. | 205-9025 | [1] | SEAL GP-DUO-CONE | |
| 205-9024 | [2] | RING-TORIC | ||
| 3. | 2R-0525 | [2] | CUP-BEARING | |
| 4. | 2R-0524 | [2] | CONE-BEARING | |
| 5. | 6V-8133 M | [12] | BOLT (M24X3X80-MM) | |
| 6. | 7Y-1504 | [4] | GEAR-PLANETARY (20-TEETH) | |
| 7. | 7Y-1470 | [1] | GEAR-SUN (21-TEETH) | |
| 8. | 7Y-1469 | [1] | COUPLING | |
| 9. | 7Y-1492 | [2] | SPACER (67X101.1X10-MM THK) | |
| 10. | 114-1541 | [6] | PIN-DOWEL | |
| 11. | 200-3490 | [1] | HOUSING-GEAR | |
| 12. | 7Y-1473 BL | [1] | SHIM (0.3-MM THK) | |
| 7Y-1476 BL | [1] | SHIM (0.6-MM THK) | ||
| 7Y-1477 BL | [1] | SHIM (0.7-MM THK) | ||
| 7Y-1478 BL | [1] | SHIM (0.8-MM THK) | ||
| 7Y-1479 BL | [1] | SHIM (1-MM THK) | ||
| 17. | 169-5560 | [1] | GEAR-COUPLING (74-TEETH) | |
| 18. | 8C-5240 | [1] | SEAL-O-RING | |
| 19. | 7Y-1482 | [1] | CARRIER-PLANETARY | |
| 20. | 7Y-1484 | [1] | SPACER (191X221X8.5-MM THK) | |
| 21. | 110-7217 | [2] | RING-RETAINING | |
| 22. | 7Y-1485 | [1] | CARRIER-PLANETARY | |
| 23. | 7Y-1491 | [1] | GEAR-SUN (21-TEETH) | |
| 24. | 7Y-1487 | [1] | GEAR-RING (85-TEETH) | |
| 25. | 7M-8485 | [2] | SEAL-O-RING | |
| 26. | 3E-2338 | [2] | PLUG-PIPE | |
| 27. | 7Y-1488 | [1] | CARRIER AS | |
| 27A. | 7Y-0656 | [3] | SHAFT-PLANETARY | |
| 28. | 169-5559 | [1] | GEAR-SUN (26-TEETH) | |
| 29. | 7Y-1493 | [1] | SPACER (8.7X50X14-MM THK) | |
| 30. | 199-4582 | [3] | BEARING AS | |
| 31. | 8T-4240 | [3] | RING-RETAINING | |
| 32. | 094-0584 | [6] | WASHER (40.3X72X1-MM THK) | |
| 33. | 7Y-1495 | [3] | GEAR-PLANETARY (29-TEETH) | |
| 34. | 8T-3957 M | [10] | BOLT-SOCKET HEAD (M12X1.75X30-MM) | |
| 35. | 7Y-1498 | [1] | COVER | |
| 36. | 7Y-0661 | [3] | SHAFT-PLANETARY | |
| 37. | 7Y-5235 M | [20] | BOLT (M24X3X190-MM) | |
| 38. | 8T-4167 | [20] | WASHER-HARD (26X44X4-MM THK) | |
| 39. | 7Y-1499 | [3] | GEAR-PLANETARY (20-TEETH) | |
| 40. | 1U-8846 B | SEALANT-GASKET | ||
| 42. | 7Y-1483 | [1] | GEAR-RING (63-TEETH) | |
| 43. | 199-4583 | [11] | BEARING AS | |
| 44. | 4I-7576 | [14] | WASHER (66.3X104X3-MM THK) | |
| 45. | 095-0891 | [7] | PIN-SPRING | |
| 46. | 7Y-0662 | [4] | SHAFT-PLANETARY | |
| 47. | 7Y-0808 B | [1] | SHIM (1.6-MM THK) | |
| 48. | 096-3216 M | [2] | SETSCREW-SOCKET (M12X1.75X12-MM) | |
| 49. | 7Y-1480 BL | [1] | SHIM (1.6-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 135-8960 L | [1] | KIT-SHIM (FINAL DRIVE) | ||
| (ALSO INCLUDES 3 SHIMS) | ||||
| B | USE AS REQUIRED | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
#SEBP31810227
169-5525: POWER TRAIN AR
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 169-5528 Y | [1] | DRIVE GP-SWING (LH) | ||
| S/N DET1-114 | ||||
| 227-6156 Y | [1] | DRIVE GP-SWING (LH) | ||
| S/N DET115-UP | ||||
| 169-5529 Y | [1] | DRIVE GP-SWING (RH) | ||
| S/N DET1-114 | ||||
| 227-6157 Y | [1] | DRIVE GP-SWING (RH) | ||
| S/N DET1115-UP | ||||
| 169-5527 Y | [1] | FASTENER GP-SWING & FINAL DR | ||
| 169-5543 Y | [2] | DRIVE GP-FINAL | ||
| 115-6399 Y | [2] | SPROCKET GP (NON-SEGMENTED) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP31810228
115-6399: SPROCKET GP
Parts for your 345B II EXCAVATOR:
CATERPILLAR SIS#SEBP31810229
445-0553: SPROCKET GP
Parts for your 345B II EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0264 FMI 08 Decel Throttle Position signal abnormal
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines
3176C Engines for Caterpillar Built Machines
Service Magazine




