235-6331 PUMP GP-FUEL INJECTION S/N CPT10866-99999 PART OF 188-5096 ENGINE AR-PRIMARY Type 1 M318C WHEELED EXCAVATOR

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 235-6331 PUMP GP-FU
1. 235-6331 PUMP GP-FU

PUMP GP-FUEL TRANSFER

2. 188-4937 PUMP GP-FU
3. 188-4937 PUMP GP-FU
4. 216-9131 PUMP GP-FU
5. 216-9131 PUMP GP-FU

SEPARATOR GP-WATER

6. 138-3097 SEPARATOR

TANK GP-FUEL

7. 186-0501 TANK & MTG
8. 196-1776 TANK GP-FU

VALVE GP-FUEL SHUTOFF

9. 145-7210 VALVE GP-F
0. INFORMATION

WHEELED EXCAVATOR M318C WHEELED EXCAVATOR BCZ
M318C Excavator BCZ00001-02000 (MACHINE) POWERED BY 3056 Engine SEBP3185 M318C BCZ (2001)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

235-6331 PUMP GP-FUEL INJECTION

#SEBP31850080

235-6331: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

235-6331 PUMP GP-FUEL INJECTION
S/N CPT10866-99999
PART OF 188-5096 ENGINE AR-PRIMARY
Type 1

i03741888 SEBP3185

2356331 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4277	[4]	WASHER (8.8X17.5X1.6-MM THK)
2.	6I-0217 M	[1]	BOLT (M8X1.25X20-MM)
3.	6I-0291 M	[8]	NUT (M8X1.25-THD)
4.	7M-7410	[1]	PLUG-PIPE
5.	100-4830 M	[1]	BOLT (M10X1.5X20-MM)
6.	101-3877	[3]	STUD (M8X1.25X37-MM)
7.	103-1074	[1]	STUD
8.	114-4363 M	[3]	BOLT (M8X1.25X12-MM)
9.	124-3708	[3]	CLIP
10.	145-8327	[1]	SEAL-O-RING
11.	147-5551	[2]	STUD
12.	149-2091	[1]	SEAL-O-RING
13.	300-6714	[5]	MOUNT
14.	162-9992	[3]	CLIP
15.	140-8718	[6]	WASHER
16.	179-7071	[4]	BOLT (M8X1.25X20-MM)
17.	199-9252	[1]	SEAL-O-RING
18.	199-9267	[1]	SEAL-O-RING
19.	199-9751	[2]	SEAL-O-RING
20.	270-5322	[1]	CONTROL GP-VOLTAGE (24-VOLT)(LOAD PROTECTION)
	7T-0093	[4]	PIN-CONNECTOR (12-GA TO 14-GA)
	177-9653	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	1S-9593	[2]	STRAP-CABLE
21.	268-4360 C	[1]	SENSOR GP-TEMPERATURE (ENGINE COOLANT)
21A.	268-4360 C	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
22.	235-6281	[1]	TIE-CABLE
23.	216-3446	[1]	SENSOR GP-SPEED (TIMING)
24.	274-6721 C	[1]	SENSOR GP-PRESSURE (ENGINE OIL)
25.	274-6720 C	[1]	SENSOR GP-PRESSURE (BOOST)
26.	216-9786	[6]	INJECTOR AS-FUEL
27.	216-9790	[1]	GEAR-FUEL PUMP (68-TEETH)
28.	216-9824	[1]	PUMP GP-FUEL INJECTION
29.	216-9826	[1]	TUBE AS (CYL NO. 1)
30.	216-9828	[1]	TUBE AS (CYL NO. 2)
31.	216-9830	[1]	TUBE AS (CYL NO. 3)
32.	216-9831	[1]	TUBE AS (CYL NO. 4)
33.	216-9834	[1]	TUBE AS (CYL NO. 5)
34.	216-9835	[1]	TUBE AS (CYL NO. 6)
35.	217-0099	[7]	SPACER (8.2X25X2-MM THK)
36.	217-0100	[4]	SPACER (8.2X12.7X25.4-MM THK)
37.	221-1018	[1]	CONTROL GP-UNPROGRAMMED
38.	228-8943	[1]	BRACKET
39.	228-8956	[1]	BRACKET
40.	228-8960	[1]	CLIP
41.	235-5917	[1]	STUD

			AVAILABLE REPAIR KIT(S):
	278-8678 C		KIT-SENSOR (LUBRICATION OIL PRESSURE)
	278-8682 C		KIT-SENSOR (AIR PRESSURE)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP31850081

235-6331: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

235-6331 PUMP GP-FUEL INJECTION
S/N CPT10866-99999
PART OF 188-5096 ENGINE AR-PRIMARY
Type 2

i05420389 SEBP3185

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-4277	[4]	WASHER (8.8X17.5X1.6-MM THK)
2.	6I-0217 M	[1]	BOLT (M8X1.25X20-MM)
3.	6I-0291 M	[8]	NUT (M8X1.25-THD)
4.	7M-7410	[1]	PLUG-PIPE
5.	100-4830 M	[1]	BOLT (M10X1.5X20-MM)
6.	101-3877	[3]	STUD (M8X1.25X37-MM)
7.	103-1074	[1]	STUD
8.	114-4363 M	[3]	BOLT (M8X1.25X12-MM)
9.	124-3708	[3]	CLIP
10.	145-8327	[1]	SEAL-O-RING
11.	147-5551	[2]	STUD
12.	149-2091	[1]	SEAL-O-RING
13.	300-6714	[5]	MOUNT
14.	162-9992	[3]	CLIP
15.	140-8718	[6]	WASHER
16.	179-7071	[4]	BOLT (M8X1.25X20-MM)
17.	199-9252	[1]	SEAL-O-RING
18.	199-9267	[1]	SEAL-O-RING
19.	199-9751	[2]	SEAL-O-RING
20.	396-6500 CY	[1]	CONTROL GP-ELECTRONIC (24-VOLT)(LOAD PROTECTION)
21.	268-4360	[1]	SENSOR GP-TEMPERATURE (ENGINE COOLANT)
21A.	268-4360	[1]	SENSOR GP-TEMPERATURE (AIR INLET)
22.	235-6281	[1]	TIE-CABLE
23.	216-3446	[1]	SENSOR GP-SPEED (TIMING)
24.	274-6721	[1]	SENSOR GP-PRESSURE (ENGINE OIL)
25.	274-6720	[1]	SENSOR GP-PRESSURE (BOOST)
26.	216-9786	[6]	INJECTOR AS-FUEL
27.	216-9790	[1]	GEAR-FUEL PUMP (68-TEETH)
28.	216-9824	[1]	PUMP GP-FUEL INJECTION
29.	216-9826	[1]	TUBE AS (CYL NO. 1)
30.	216-9828	[1]	TUBE AS (CYL NO. 2)
31.	216-9830	[1]	TUBE AS (CYL NO. 3)
32.	216-9831	[1]	TUBE AS (CYL NO. 4)
33.	216-9834	[1]	TUBE AS (CYL NO. 5)
34.	216-9835	[1]	TUBE AS (CYL NO. 6)
35.	217-0099	[7]	SPACER (8.2X25X2-MM THK)
36.	217-0100	[4]	SPACER (8.2X12.7X25.4-MM THK)
37.	221-1018	[1]	CONTROL GP-UNPROGRAMMED
38.	228-8943	[1]	BRACKET
39.	228-8956	[1]	BRACKET
40.	228-8960	[1]	CLIP
41.	235-5917	[1]	STUD

			AVAILABLE REPAIR KIT(S):
	278-8678		KIT-SENSOR (LUBRICATION OIL PRESSURE)
	278-8682		KIT-SENSOR (AIR PRESSURE)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP31850082

188-4937: PUMP GP-FUEL TRANSFER

PUMP GP-FUEL TRANSFER

188-4937 PUMP GP-FUEL TRANSFER
S/N BCZ1-636
AN ATTACHMENT

i01585275 SEBP3185

1884937 PUMP GP-FUEL TRANSFER Parts scheme

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8443	[1]	VALVE-CHECK (FUEL TRANSFER PUMP)
2.	5W-8653	[1]	COVER
3.	5W-8658	[1]	COUPLING
4.	7Y-5262	[1]	U-BOLT
5.	8U-0876 Y	[1]	HOSE GP-REFUELING
6.	113-8491	[1]	FUSE (15-AMPERE)(FUEL TRANSFER PUMP)
7.	137-9438	[1]	ELBOW
8.	175-4807	[1]	PUMP & MOTOR GP
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
9.	196-5650	[1]	SWITCH AS (REFUELING PUMP RELAY)(REFUELING PUMP)
	197-6076 M	[1]	NUT (M30X1-THD)
	197-6082	[1]	BOOT
10.	196-8643	[1]	SWITCH AS-MAGNETIC (24-VOLT)(FUEL PUMP RELAY)
11.	207-2159	[3]	ELBOW
12.	208-1658	[1]	FILM-INSTRUCTION (REFUELING)
13.	210-1715	[1]	COUPLING
14.	217-2954	[1]	PLATE
15.	2M-9780	[1]	SEAL-O-RING
16.	5C-7261 M	[2]	NUT (M8X1.25-THD)
17.	5W-5131	[1]	GROMMET
18.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
19.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
21.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
22.	8T-9402	[4]	CLAMP-HOSE
23.	120-9729 D		HOSE (1.1M)
24.	207-5141 E		SEAL (9CM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31850083

188-4937: PUMP GP-FUEL TRANSFER

PUMP GP-FUEL TRANSFER

188-4937 PUMP GP-FUEL TRANSFER
S/N BCZ637-2000
AN ATTACHMENT

i02111945 SEBP3185

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-8443	[1]	VALVE-CHECK (FUEL TRANSFER PUMP)
2.	8U-0876 Y	[1]	HOSE GP-REFUELING
3.	113-8491	[1]	FUSE (15-AMPERE)(FUEL TRANSFER PUMP)
4.	137-9438	[1]	ELBOW
5.	175-4807	[1]	PUMP & MOTOR GP (FUEL TRANSFER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
6.	196-5650	[1]	SWITCH AS (REFUELING PUMP RELAY)(REFUELING PUMP)
	197-6076 M	[1]	NUT (M30X1-THD)
	197-6082	[1]	BOOT
7.	196-8643	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
8.	207-2159	[1]	ELBOW
9.	208-1658	[1]	FILM-INSTRUCTION (REFUELING)
10.	235-1728 C	[1]	PLATE
11.	244-8586 C	[1]	COUPLING
12.	244-8587 C	[1]	COVER
13.	244-9530 C	[1]	FITTING
14.	245-2579 C	[1]	ADAPTER
15.	2M-9780	[1]	SEAL-O-RING
16.	5C-7261 M	[2]	NUT (M8X1.25-THD)
17.	5W-5131	[1]	GROMMET
18.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
19.	8T-7514 CM	[2]	SCREW-HEX SOCKET (M8X1.25X30-MM)
20.	8T-9402	[2]	CLAMP-HOSE
21.	120-9729 E		HOSE (100-CM)
22.	207-5141 BE		SEAL

	096-0061 BF	[3]	STRAP-CABLE
	197-3800 BEF		LOOM
			(LOCATED ON FUEL PUMP HARNESS)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31850084

216-9131: PUMP GP-FUEL TRANSFER

PUMP GP-FUEL TRANSFER

216-9131 PUMP GP-FUEL TRANSFER
S/N CPT1-379
PART OF 188-5096 ENGINE AR-PRIMARY

i01644536 SEBP3185

2169131 PUMP GP-FUEL TRANSFER Parts scheme

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5C-1777	[3]	NUT
2.	5C-1809	[1]	SPACER (8X19X6.5-MM)
3.	6I-0217 M	[1]	BOLT (M8X1.25X20-MM)
4.	6I-0254 M	[4]	BOLT (M8X1.25X30-MM)
5.	8N-7983	[1]	FITTING
6.	033-7849	[3]	PLUG
7.	067-6269	[3]	FERRULE
8.	067-6998	[1]	NUT (3/8-24-THD)
9.	067-6999	[1]	FERRULE
10.	100-4461 M	[1]	BOLT (M10X1.5X50-MM)
11.	100-4830 M	[1]	BOLT (M10X1.5X20-MM)
12.	101-3906	[1]	BOLT
13.	101-3907	[4]	WASHER
14.	101-7178 M	[1]	BOLT (M10X1.5X55-MM)
15.	127-8162	[2]	CLIP
16.	133-9467	[1]	BOLT
17.	133-9472	[1]	CONNECTION
18.	160-7197	[1]	CLIP
19.	162-2000	[4]	WASHER
20.	186-0790	[1]	SPACER
21.	216-9043	[1]	PUMP AS-FUEL TRANSFER
22.	7W-4553	[1]	GASKET-FUEL PUMP
23.	216-9053	[1]	CONNECTOR
24.	216-9055	[1]	BRACKET
25.	216-9056	[1]	TUBE AS
26.	102-9987	[1]	CLIP
27.	216-9066	[1]	TUBE AS
28.	149-6117	[1]	CLIP
29.	216-9086	[1]	SPACER (10.5X20X32-MM THK)
30.	216-9092	[2]	CONNECTOR-SPECIAL (BANJO)
31.	216-9093	[1]	TUBE AS
32.	102-9986	[2]	CLIP
33.	216-9109	[1]	LINE AS-FUEL
34.	7W-4539	[1]	CLIP
35.	103-0173	[1]	CLIP
36.	216-9110	[1]	TUBE AS
37.	102-9986	[1]	CLIP
38.	216-9752	[4]	WASHER
39.	216-9767	[2]	BOLT-FLANGE HEAD
40.	217-0721	[1]	BOLT-SPECIAL (BANJO)
	M		METRIC PART

#SEBP31850085

216-9131: PUMP GP-FUEL TRANSFER

PUMP GP-FUEL TRANSFER

216-9131 PUMP GP-FUEL TRANSFER
S/N CPT380-99999
PART OF 188-5096 ENGINE AR-PRIMARY

i01895614 SEBP3185

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5C-1777	[4]	NUT
2.	5C-1809	[1]	SPACER (8X19X6.5-MM)
3.	6I-0217 M	[1]	BOLT (M8X1.25X20-MM)
4.	6I-0254 M	[5]	BOLT (M8X1.25X30-MM)
5.	8N-7983	[1]	FITTING
6.	033-7849	[3]	PLUG
7.	067-6269	[4]	FERRULE
8.	067-6998	[1]	NUT (3/8-24-THD)
9.	067-6999	[1]	FERRULE
10.	100-4461 M	[1]	BOLT (M10X1.5X50-MM)
11.	100-4830 M	[1]	BOLT (M10X1.5X20-MM)
12.	101-3906	[1]	BOLT
13.	246-4361	[4]	WASHER (10.5X14X1.5-MM THK)
14.	101-7178 M	[1]	BOLT (M10X1.5X55-MM)
15.	102-9988	[1]	SPACER
16.	127-8162	[2]	CLIP
17.	133-9467	[1]	BOLT
18.	133-9472	[1]	CONNECTION
19.	318-2365	[2]	CLIP
20.	241-3359	[7]	WASHER-SEALING (13.25X18.45X1.6-MM THK)
21.	218-3915	[1]	SPACER
22.	191-1260	[2]	BOLT
23.	191-5941	[1]	TUBE AS
23A.	102-9986	[1]	CLIP
23B.	067-6269	[2]	FERRULE
24.	191-5942	[1]	TUBE AS
24A.	102-9986	[1]	CLIP
24B.	149-6116	[1]	CLIP
24C.	067-6268	[2]	NUT-FUEL LINE
24D.	067-6269	[2]	FERRULE
25.	191-5943	[1]	LINE AS-FUEL
25A.	101-3986	[1]	CLIP
25B.	224-8679	[1]	CLIP
25C.	101-3983	[1]	NUT (3/16)
25D.	101-3984	[1]	FERRULE
26.	255-2453	[1]	PUMP AS-FUEL PRIMING
26A.	231-4457	[1]	GASKET
27.	216-9053	[1]	CONNECTOR
28.	216-9055	[1]	BRACKET
29.	216-9066	[1]	TUBE AS
29A.	149-6117	[1]	CLIP
29B.	067-6268	[1]	NUT-FUEL LINE
29C.	067-6269	[1]	FERRULE
30.	216-9086	[1]	SPACER (10.5X20X32-MM THK)
31.	216-9092	[2]	CONNECTOR-SPECIAL (BANJO)
32.	216-9110	[1]	TUBE AS
32A.	102-9986	[1]	CLIP
33.	6I-0593 M	[2]	BOLT (M10X1.5X30-MM)
34.	217-0721	[1]	BOLT-SPECIAL (BANJO)
	M		METRIC PART

#SEBP31850086

138-3097: SEPARATOR GP-WATER

SEPARATOR GP-WATER

138-3097 SEPARATOR GP-WATER
S/N BCZ1-2000
PART OF 186-0502 LINES GP-FUEL

i01046950 SEBP3185

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	101-3912	[1]	WASHER
2.	101-3949	[1]	SEAL
3.	101-3953	[1]	SEAL
4.	101-3955	[1]	SEAL
5.	138-3100	[1]	ELEMENT-WATER SEPARATOR
6.	101-3739	[1]	NUT
7.	101-3740	[1]	CAP
8.	101-3741	[1]	SEAL

			AVAILABLE REPLACEMENT PART(S):
	118-5637	[1]	KIT-BOWL (WATER SEPARATOR)

#SEBP31850087

186-0501: TANK & MTG GP-FUEL

TANK & MTG GP-FUEL

186-0501 TANK & MTG GP-FUEL
S/N BCZ1-2000
PART OF 186-0468 CHASSIS AR

i01547775 SEBP3185

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	159-3727	[1]	TUBE AS-DRAIN
2.	160-9192	[2]	CLIP
3.	196-1767	[1]	STRAP AS
4.	196-1770	[1]	BRACKET AS
5.	196-1776 Y	[1]	TANK GP-FUEL
6.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
7.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
8.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
9.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31850088

196-1776: TANK GP-FUEL

TANK GP-FUEL

196-1776 TANK GP-FUEL
S/N BCZ1-2000
385 LITERS (100.1 GALLONS)
PART OF 186-0501 TANK & MTG GP-FUEL

i01547773 SEBP3185

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	246-2641	[1]	PADLOCK GP
	5P-8500	[1]	KEY
2.	7X-7700	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	9X-2205	[1]	KIT-CAP FILTER (FUEL TANK)
	9X-8600	[1]	SEAL-O-RING
3.	9P-7121	[1]	STRAINER-FUEL (FUEL TANK)
4.	101-4639	[1]	PLUG AS-DRAIN (FUEL TANK)
5.	196-1760	[1]	TUBE AS
6.	263-9293	[1]	TANK AS-FUEL
7.	196-5649 Y	[1]	SENSOR GP-FUEL LEVEL
	208-7012	[1]	SEAL
	6S-8620	[1]	CLAMP-HOSE
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	132-3056	[1]	SEAL-O-RING
9.	2M-9780	[1]	SEAL-O-RING
10.	8T-0289 M	[6]	BOLT (M5X0.8X20-MM)
11.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
12.	148-8410	[1]	PLUG AS
	2M-9780	[1]	SEAL-O-RING
	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP31850089

145-7210: VALVE GP-FUEL SHUTOFF

VALVE GP-FUEL SHUTOFF

145-7210 VALVE GP-FUEL SHUTOFF
S/N BCZ1-2000
PART OF 186-0502 LINES GP-FUEL

i01663694 SEBP3185

1457210 VALVE GP-FUEL SHUTOFF Parts scheme

For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	196-7480 Y	[2]	VALVE GP-FLOW CONTROL (FUEL)
2.	196-7516	[1]	LEVER
3.	5W-9522	[4]	WASHER
	Y		SEPARATE ILLUSTRATION

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Operation and Maintenance Manual

Engine Valve Lash - Check
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Technical Information Bulletin

Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts
Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts

Troubleshooting the Fuel Injection System{1250, 1251, 1252}
Troubleshooting the Fuel Injection System{1250, 1251, 1252}

Troubleshooting the Fuel Injection System For 3054 and 3056 Engines {1251, 1252}
Troubleshooting the Fuel Injection System For 3054 and 3056 Engines {1251, 1252}

Specifications

Fuel Injection Nozzles
3056E Engines for Caterpillar Built Machines

Fuel Injection Pump
3056E Engines for Caterpillar Built Machines

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Systems Operation

Fuel Injection
3056E Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Testing and Adjusting

Fuel Injection Nozzle - Test
3056E Engines for Caterpillar Built Machines

Fuel Injection Timing - Check
3056E Engines for Caterpillar Built Machines

Troubleshooting

CID 1627 FMI 03
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 00
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 03
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 04
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 05
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 07
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 08
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 09
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 10
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 11
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 12
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

CID 1684 FMI 14
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Fuel Injection Pump Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines

Disassembly and Assembly

Fuel Injection Nozzles - Remove
3056E Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Install
3056E Engine for Caterpillar Built Machines

Fuel Injection Pump - Remove
3056E Engine for Caterpillar Built Machines

Fuel Injection Pump - Install
3056E Engine for Caterpillar Built Machines

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Installation of Fuel Injection Pump {1251}
2007/12/10

Support for Fuel Injection Pumps {1251}
2008/07/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Locking Screw for the Fuel Injection Pump on the 3054E and 3056E Engines {1251, 1290}
2010/03/31

Fuel Injection Nozzles for 3056E Engines {1251, 1290}
2010/04/22

Fuel Injection Pump Mounting Flange on Certain 3056E Machine Engines {1251, 1290}
2014/06/17

Cat<SUP>®</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/06/25

Caterpillar Parts SIS Catalog M318C :

235-6331 PUMP GP-FUEL INJECTION

235-6367 LINES GP-FUEL FILTER

186-0502 LINES GP-FUEL

8U-0876 HOSE GP-REFUELING

235-6347 FILTER GP-FUEL

141-7844 BASE GP-FUEL FILTER

237-2264 TURBOCHARGER GP

196-5701 SHIELD GP-EXHAUST

235-6331 PUMP GP-FUEL INJECTION

188-4937 PUMP GP-FUEL TRANSFER

216-9131 PUMP GP-FUEL TRANSFER

138-3097 SEPARATOR GP-WATER

186-0501 TANK & MTG GP-FUEL

196-1776 TANK GP-FUEL

Truck sale:

19,000 USD

Caterpillar M318C, Construction
- wheel excavator
H.O. PENN MACHINERY CO., INC.

64,763

Caterpillar M318C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland

36,800

Caterpillar M318C, Construction
- wheel excavator
KELLY TRACTOR CO.

CATERPILLAR M318C 2005
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

$64,442 USD

CATERPILLAR M318C 2003
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -