AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

296-3240 CYLINDER GP-BUCKET S/N BCZ1-2000 110-MM (4.3-IN) BORE X 1055-MM (41.5-IN) STROKE FIELD REPLACEMENT FOR @@@@@183-8854@@@@@ M318C


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

WHEELED EXCAVATOR M318C WHEELED EXCAVATOR BCZ
 M318C Excavator BCZ00001-02000 (MACHINE) POWERED BY 3056 Engine SEBP3185 M318C BCZ   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
183-8854 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
185-1736 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
296-3240 CYLINDER GP-BUCKET
CYLINDER GP-HYDRAULIC
296-3235 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
296-3236 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
296-3238 CYLINDER GP-HYDRAULIC
 

#SEBP31850300
 

296-3240: CYLINDER GP-BUCKET

296-3240 CYLINDER GP-BUCKET
S/N BCZ1-2000
110-MM (4.3-IN) BORE X 1055-MM (41.5-IN) STROKE
FIELD REPLACEMENT FOR @@@@@183-8854@@@@@
i02621459 SEBP3185
2963240 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-9285 J [1] SEAL-LIP TYPE  
2. 183-8858 [1] CYLINDER AS  
2A. 105-7366 [1] BUSHING  
3. 183-8878 [1] HEAD  
4. 296-3264 [1] ROD & BEARING AS-CYLINDER  
4A. 190-5335 [1] BUSHING  
5. 095-1716 J [1] SEAL-O-RING  
6. 096-1054 J [1] RING-BACKUP  
7. 096-8139 [1] RING-RETAINING  
8. 103-8341 J [1] RING-SEAL  
9. 105-7360 J [1] RING-BACKUP  
10. 114-0755 [1] BUSHING  
11. 143-8031 J [1] RING  
12. 143-8034 J [1] RING  
13. 143-8150 M [1] LOCKNUT-SPECIAL  
14. 147-5818 [1] PISTON  
15. 147-5819 J [1] RING  
16. 150-5814 [1] STOP  
17. 170-9843 J [1] SEAL-BUFFER  
18. 170-9859 J [1] SEAL-U-CUP  
19. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
20. 9X-7301 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  179-9625 [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31850301
 

296-3235: CYLINDER GP-HYDRAULIC

296-3235 CYLINDER GP-HYDRAULIC
S/N BCZ1-2000
130-MM (51.1-IN) BORE X 906-MM (35.6-IN) STROKE
FIELD REPLACEMENT FOR @@@@@183-8850@@@@@
i02615682 SEBP3185
2963235 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4622 [1] LOCKNUT (SPECIAL)  
2. 165-9287 J [1] SEAL-LIP TYPE  
3. 172-1029 [1] HEAD  
4. 183-8855 [1] CYLINDER AS  
4A. 258-8506 [1] BUSHING  
5. 216-0003 J [1] SEAL-U-CUP  
6. 296-3260 [1] ROD & BEARING AS-CYLINDER  
6A. 258-8507 [1] BUSHING  
7. 170-9845 J [1] SEAL-BUFFER  
8. 093-1571 [1] RING-RETAINING  
9. 095-1631 J [1] SEAL-O-RING  
10. 096-1588 J [1] RING-BACKUP  
11. 114-0758 [1] BUSHING  
12. 150-5884 J [1] RING  
13. 179-9770 [1] PISTON  
14. 179-9771 J [2] RING  
15. 7I-1351 [1] STOP  
16. 7I-1352 J [1] RING-SEAL  
17. 7Y-4633 J [1] RING-BACKUP  
18. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
19. 9X-3595 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  215-9986 [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31850302
 

296-3236: CYLINDER GP-HYDRAULIC

296-3236 CYLINDER GP-HYDRAULIC
S/N BCZ1-2000
130-MM (5.1-IN) BORE X 906-MM (35.6-IN) STROKE
FIELD REPLACEMENT FOR @@@@@183-8851@@@@@
i02615281 SEBP3185
2963236 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4622 [1] LOCKNUT (SPECIAL)  
2. 165-9287 J [1] SEAL-LIP TYPE  
3. 172-1029 [1] HEAD  
4. 183-8855 [1] CYLINDER AS  
4A. 258-8506 [1] BUSHING  
5. 216-0003 J [1] SEAL-U-CUP  
6. 296-3261 [1] ROD & BEARING AS-CYLINDER  
6A. 258-8507 [1] BUSHING  
7. 170-9845 J [1] SEAL-BUFFER  
8. 093-1571 [1] RING-RETAINING  
9. 095-1631 J [1] SEAL-O-RING  
10. 096-1588 J [1] RING-BACKUP  
11. 114-0758 [1] BUSHING  
12. 150-5884 J [1] RING  
13. 179-9770 [1] PISTON  
14. 179-9771 J [2] RING  
15. 7I-1351 [1] STOP  
16. 7I-1352 J [1] RING-SEAL  
17. 7Y-4633 J [1] RING-BACKUP  
18. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
19. 9X-3595 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  215-9986 J [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31850303
 

296-3238: CYLINDER GP-HYDRAULIC

296-3238 CYLINDER GP-HYDRAULIC
S/N BCZ1-2000
130-MM (5.1-IN) BORE X 1205-MM (47.4-IN) STROKE
FIELD REPLACEMENT FOR @@@@@183-8853@@@@@
i02615323 SEBP3185
2963238 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-1353 [1] HEAD  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 165-9287 J [1] SEAL-LIP TYPE  
4. 183-8857 [1] CYLINDER AS  
4A. 128-3031 [1] BUSHING  
5. 216-0003 J [1] SEAL-U-CUP  
6. 296-3262 [1] ROD & BEARING AS-CYLINDER  
6A. 128-3031 [1] BUSHING  
7. 170-9845 J [1] SEAL-BUFFER  
8. 093-1571 [1] RING-RETAINING  
9. 095-0929 [2] RING-RETAINING  
10. 095-1631 J [1] SEAL-O-RING  
11. 096-1588 J [1] RING-BACKUP  
12. 103-8378 [1] RING-RETAINING  
13. 103-8379 [1] RING  
14. 103-8380 [1] STOP  
15. 114-0758 [1] BUSHING  
16. 150-5884 J [1] RING  
17. 179-9770 [1] PISTON  
18. 179-9771 J [2] RING  
19. 7I-1351 [1] STOP  
20. 7I-1352 J [1] RING-SEAL  
21. 7Y-4633 J [1] RING-BACKUP  
22. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
23. 9X-3595 [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  215-9986 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31850304
 

188-4991: CYLINDER GP-STABILIZER

188-4991 CYLINDER GP-STABILIZER
S/N BCZ1-2000
130-MM (4-IN) BORE X 492-MM (19.4) STROKE
PART OF 188-4992 STABILIZER AR
AN ATTACHMENT
i01605498 SEBP3185
1884991 CYLINDER GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-0916 [1] CYLINDER AS  
2. 200-0917 [1] ROD  
3. 200-0918 [1] PISTON  
4. 200-0919 [1] COLLAR  
5. 221-3539 [1] PISTON  
6. 118-3116 [2] RETAINER  
7. 118-3117 [2] CONE  
8. 5W-1274 [2] PLUG  
9. 225-8698 J [1] SEAL  
10. 118-2716 J [1] RING  
11. 118-2717 J [2] RING  
12. 135-7933 J [1] SEAL-O-RING  
13. 135-7934 J [1] RING-BACKUP  
14. 135-7935 J [1] SEAL-O-RING  
15. 135-7936 J [1] RING  
16. 135-7937 J [1] SEAL-O-RING  
17. 135-7938 J [1] RING-BACKUP  
18. 135-7939 J [1] RING  
19. 5W-6388 J [1] SEAL-O-RING  
20. 118-2727 J [1] RING-BACKUP  
21. 4J-5351 J [3] SEAL-O-RING  
22. 118-3130 J [2] RING-BACKUP  
23. 118-3131 J [2] SEAL-O-RING  
24. 118-3132 [2] SPRING  
25. 118-2730 M [1] NUT (M52X1.5-THD, LH)  
26. 118-2731 [1] PIN  
27. 8G-4189 [2] BEARING-SELF-ALIGNING  
28. 8T-0707 [4] RING-RETAINING (INTERNAL)  
29. 118-2732 [1] FITTING-GREASE  
30. 221-3541 J [2] RING-BACKUP  
   
    AVAILABLE REPAIR KIT(S):
  200-0920 J [1] KIT-SEAL (STABILIZER CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31850305
 

183-8853: CYLINDER GP-STICK

183-8853 CYLINDER GP-STICK
S/N BCZ1-2000
130MM (5.12IN) BORE X 1223MM (48.15IN) STROKE
PART OF 183-8876 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT ORDER @@@@@296-3238@@@@@
AN ATTACHMENT
i01549496 SEBP3185
1838853 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-1353 [1] HEAD  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 183-8857 [1] CYLINDER AS  
3A. 128-3031 [1] BUSHING  
4. 296-3262 [1] ROD & BEARING AS-CYLINDER  
4A. 128-3031 [1] BUSHING  
5. 093-1571 [1] RING-RETAINING  
6. 095-0929 [2] RING-RETAINING  
7. 095-1631 J [1] SEAL-O-RING  
8. 216-0003 J [1] SEAL-U-CUP  
9. 096-1588 J [1] RING-BACKUP  
10. 103-8378 [1] RING-RETAINING  
11. 103-8379 [1] RING  
12. 103-8380 [1] STOP  
13. 114-0758 [1] BUSHING  
14. 170-9845 J [1] SEAL-BUFFER  
15. 150-5884 J [1] RING  
16. 165-9287 J [1] SEAL-LIP TYPE  
17. 179-9770 [1] PISTON  
18. 179-9771 J [2] RING  
19. 7I-1351 [1] STOP  
20. 7I-1352 J [1] RING-SEAL  
21. 7Y-4633 J [1] RING-BACKUP  
22. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
23. 9X-3595 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  215-9986 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP31850306
 

217-5636: DRIVE GP-PUMP

217-5636 DRIVE GP-PUMP
S/N BCZ1-2000
PART OF 190-8198 PUMP GP-PISTON
i01741547 SEBP3185
2175636 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-5927 [1] FLANGE  
2. 216-0088 [1] HUB-CLUTCH  
3. 3K-0715 [1] SEAL-O-RING  
4. 351-1768 [1] SEAL-O-RING  
5. 8T-3957 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
  M   METRIC PART
 

#SEBP31850307
 

111-1858: DRIVE GP-SWING

111-1858 DRIVE GP-SWING
S/N BCZ1-2000
PART OF 186-0468 CHASSIS AR
i01230526 SEBP3185
1111858 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 368-2783 Y [1] MOTOR GP-SWING  
2. 152-7372 Y [1] DRIVE GP-SWING  
3. 108-1781 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
4. 113-2003 M [16] BOLT-SOCKET HEAD (M16X2X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP31850308
 

152-7372: DRIVE GP-SWING

152-7372 DRIVE GP-SWING
S/N BCZ1-2000
PART OF 111-1858 DRIVE GP-SWING
i01224450 SEBP3185
1527372 DRIVE GP-SWING Parts scheme 1527372 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-0856 [1] SHAFT  
2. 155-0857 [3] GEAR-PLANETARY (33-TEETH)  
3. 155-0858 [1] CARRIER  
4. 155-0824 [3] PIN  
5. 082-3084 [6] WASHER  
6. 082-3085 [6] WASHER  
7. 132-4292 [63] BEARING AS-NEEDLE  
8. 095-0919 [3] RING-RETAINING  
9. 155-0864 [1] HOUSING AS-SWING  
10. 155-0865 [1] SEAL-LIP TYPE  
11. 155-0866 [1] SEAL  
12. 155-0867 [1] PINION  
13. 155-0868 [1] WASHER (100X169X2-MM THK)  
14. 155-0869 [1] BEARING AS-ROLLER  
15. 155-0870 [1] BEARING AS-ROLLER  
16. 179-3152 [2] NUT-SLOTTED  
17. 155-0872 [1] RING  
19. 155-0874 [1] CARRIER-PLANETARY  
20. 155-0875 [4] GEAR-PLANETARY (32-TEETH)  
21. 155-0876 [4] BEARING AS-ROLLER  
22. 9X-0656 [4] RING  
23. 8U-5005 [3] SHIM (1-MM THK)  
24. 095-0928 [1] RING-RETAINING  
25. 121-8088 [2] BALL BEARING  
26. 155-0877 [1] GEAR-SUN (19-TEETH)  
27. 098-2982 B [4] SHIM (1.5-MM THK)  
28. 110-4737 [2] RING-RETAINING  
29. 155-0878 [1] HOUSING-BRAKE  
30. 155-0849 [1] ORIFICE  
31. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
32. 222-5793 [1] SEAL-O-RING  
33. 155-0850 [1] PISTON  
34. 155-0851 [1] SEAL-LIP TYPE  
35. 155-0852 [1] SEAL-LIP TYPE  
36. 179-3151 [1] SPRING  
37. 179-3154 [1] SHIM (3.5-MM THK)  
38. 132-4268 B [5] DISC-CLUTCH (1.7-MM THK)  
39. 132-4262 B [6] DISC-CLUTCH (1.4-MM THK)  
40. 132-4263 B [1] DISC-CLUTCH (1.2-MM THK)  
41. 132-4265 B [1] DISC-CLUTCH (1.6-MM THK)  
42. 132-4266 B [1] DISC-CLUTCH (1.8-MM THK)  
43. 9X-6574 [1] RING-RETAINING  
44. 155-0855 [1] SLEEVE  
45. 8T-0707 [1] RING-RETAINING (INTERNAL)  
46. 222-5792 [1] SEAL-O-RING  
47. 197-6054 [1] WASHER (63.6X70X0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP31850309
 

109-7288: FILTER GP-OIL

109-7288 FILTER GP-OIL -HYDRAULIC, SWING CIRCUIT
S/N BCZ1-2000
PART OF 188-7587 LINES GP-SWING DRIVE
i00492621 SEBP3185
1097288 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your M318C WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3598 [1] BASE-FILTER  
2. 117-1495 [1] SEAL-O-RING  
3. 117-0951 [1] HOUSING  
4. 361-7480 [1] FILTER ELEMENT-OIL (ADVANCED EFFICIENCY)(SWING CIRCUIT)  
 

Information:

Operation and Maintenance Manual
Oscillating Axle Control
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Outrigger and Dozer Blade Cylinders Leak on M313 Through M325 Wheeled Excavator and Wheeled Material Handlers{5102, 5468}
Outrigger and Dozer Blade Cylinders Leak on M313 Through M325 Wheeled Excavator and Wheeled Material Handlers{5102, 5468}
Specifications
Stabilizer Cylinders
M318C Wheeled Excavator Machine System
Boom Cylinder
M318C Wheeled Excavator Machine System
Stick Cylinder
M318C Excavator Machine System
Boom Cylinder
M318C Wheeled Excavator Machine System
Bucket Cylinder
M318C Excavator Machine System
Axle Oscillation Lock Cylinder
M318C Wheeled Excavator Machine System
Stabilizer Cylinders
M318C Wheeled Excavator Machine System
Blade Lift Cylinder
M318C Wheeled Excavator Machine System
Boom Cylinder
M318C Wheeled Excavator Machine System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Bucket, Stick and VA Boom)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Steering Cylinder
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Cylinders (Boom, Bucket, Stick and VA Boom)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Steering Cylinder
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Boom Dampening System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Testing and Adjusting
Axle Stabilizer Cylinder Air - Purge
M318C Excavator Hydraulic System
Cylinder Drift - Check
M318C Excavator Hydraulic System
Cylinder Speed - Check
M318C Excavator Hydraulic System
Axle Oscillation Lock Cylinder Air - Purge
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Cylinder Drift - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Cylinder Speed - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Disassembly and Assembly
Steering Cylinder - Disassemble
M318C and M322C Excavators Machine Systems
Steering Cylinder - Assemble
M318C Excavator Machine Systems
Blade Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems
Fore Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems
Bucket Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems
Stabilizer Cylinder - Remove and Install
M318C Excavator Machine Systems
Boom Cylinder - Remove and Install - Stub Boom
M318C Excavator Machine Systems
Hydraulic Pedal Control (Travel) - Remove
M318C Excavator Machine Systems
Stick Cylinder - Remove and Install
M318C Excavator Machine Systems
Stick Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems
Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems
Stabilizer Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems
Service Magazine
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
2008/03/24
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog M318C :

CYLINDER GP-BUCKET
185-1736 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
183-8854 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
296-3237 CYLINDER GP-BOOM
CYLINDER GP-BOOM
183-8852 CYLINDER GP-BOOM
CYLINDER GP-BOOM
183-8851 CYLINDER GP-BOOM
CYLINDER GP-BOOM
183-8850 CYLINDER GP-BOOM
CYLINDER GP-BLADE
252-7305 CYLINDER GP-BLADE
CYLINDER GP-BLADE
221-3545 CYLINDER GP-BLADE
CYLINDER GP-HYDRAULIC
296-3235 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
296-3236 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
296-3238 CYLINDER GP-HYDRAULIC
CYLINDER GP-STABILIZER
188-4991 CYLINDER GP-STABILIZER
CYLINDER GP-STICK
183-8853 CYLINDER GP-STICK
DRIVE GP-PUMP
217-5636 DRIVE GP-PUMP
DRIVE GP-SWING
111-1858 DRIVE GP-SWING
DRIVE GP-SWING
152-7372 DRIVE GP-SWING

Truck sale:

Caterpillar M318C, Construction
19,000 USD 
Caterpillar M318C, Construction
- wheel excavator
H.O. PENN MACHINERY CO., INC.
Caterpillar M318C, Construction
64,763 
Caterpillar M318C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M318C, Construction
36,800 
Caterpillar M318C, Construction
- wheel excavator
KELLY TRACTOR CO.
CATERPILLAR M318C 2005
 
CATERPILLAR M318C 2005
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
 
$64,442 USD 
CATERPILLAR M318C 2003
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.