230-2107 HYDRAULIC AR-3 VALVE S/N AKM1235-UP; ALY1335-UP PART OF 189-4616, 191-6307 GENERAL AR, 235-8345 HYDRAULIC AR ALSO AN ATTACHMENT D6N

Part No	Qty	Parts name
230-8747 Y	[1]	LINES GP-ANGLE & TILT
		S/N AKM1235-1793; ALY1335-2065
273-8325 Y	[1]	LINES GP-ANGLE & TILT
		S/N AKM1794-UP; ALY2066-UP
238-1022 Y	[1]	LINES GP-DIAGNOSTIC (REMOTE PRESSURE TAPS)
		S/N AKM1235-1793; ALY1335-2065
261-6641 Y	[1]	LINES GP-DIAGNOSTIC (REMOTE PRESSURE TAPS)
		S/N AKM1794-UP; ALY2066-UP
230-8748 Y	[1]	LINES GP-LIFT CYLINDER
220-1322 Y	[1]	LINES GP-PILOT
		S/N AKM1235-1793; ALY1335-2065
261-5833 Y	[1]	LINES GP-PILOT
		S/N AKM1794-UP; ALY2066-UP
230-8749 Y	[1]	LINES GP-PUMP
		S/N AKM1235-1793; ALY1335-2065
268-1133 Y	[1]	LINES GP-PUMP
		S/N AKM1794-UP; ALY2066-UP
236-3972 Y	[1]	LINES GP-STEERING
		S/N AKM1235-1793; ALY1335-2065
261-4708 Y	[1]	LINES GP-STEERING
		S/N AKM1794-UP; ALY2066-UP
191-9536 Y	[1]	MOTOR GP-PISTON (STEERING)
231-0451 Y	[1]	MOUNTING GP-VALVE
222-1214 Y	[1]	PUMP GP-PISTON (STEERING)
		S/N AKM1235-1793; ALY1335-2065
257-8470 Y	[1]	PUMP GP-PISTON (STEERING)
		S/N AKM1794-UP; ALY2066-UP
230-9131 Y	[1]	TANK & FILTER GP-HYDRAULIC
236-2078 Y	[1]	CONTROL AR-PILOT HYDRAULIC
246-4206 Y	[1]	VALVE GP-BANK 3 (BULLDOZER)
		S/N AKM1235-UP; ALY1335-UP
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP32470721

173-8641: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

173-8641 HYDRAULIC AR-4 VALVE
S/N AKM1-1234; ALY1-1334
FOR USE WITH @@@@@180-4560@@@@@, @@@@@167-1463@@@@@
CANNOT BE USED WITH @@@@@167-1464@@@@@, @@@@@206-9537@@@@@
AN ATTACHMENT

i01434755 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
164-3504 Y	[1]	CONTROL GP-HYDRAULIC HAND (RIPPER)
163-3270 Y	[1]	LINES GP-RIPPER
209-6764 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)
Y		SEPARATE ILLUSTRATION

#SEBP32470722

229-2831: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

229-2831 HYDRAULIC AR-4 VALVE
S/N AKM1-1234; ALY1-1334
REPLACED BY @@@@@254-6941@@@@@
FOR USE WITH SEMI-UNIVERSAL BULLDOZER & RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT

i01827688 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
165-4481 Y	[1]	CONTROL GP-HYDRAULIC HAND (BULLDOZER)
164-3504 Y	[1]	CONTROL GP-HYDRAULIC HAND (RIPPER)
163-3270 Y	[1]	LINES GP-RIPPER
228-3554 Y	[1]	LINES GP-TILT CYLINDER
209-6764 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)

	[2]	PLUG AS
		(EACH INCLUDES)
3D-2824	[1]	SEAL-O-RING
9S-4183	[1]	PLUG (1-1/16-12-THD)
Y		SEPARATE ILLUSTRATION

#SEBP32470723

230-2140: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

230-2140 HYDRAULIC AR-4 VALVE
S/N AKM1-UP; ALY1-UP
PROVIDE AN OPTIONAL PILOT CONTROL FOR THE RIPPER
FOR USE WITH HYDRAULIC AR-BLADE CONTROL, COVER GP CONSOLE (IMP), INSTALLATION AR (WINCH ELEC)
CANNOT BE USED WITH WINCH AR TOWING, COVER GP CONSOLE (WINCH), INSTALLATION AR WINCH
AN ATTACHMENT

i02061158 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
238-0962 Y	[1]	CONTROL AR-PILOT HYDRAULIC (RIPPER)
230-8752 Y	[1]	LINES GP-RIPPER
230-9134 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)
		S/N AKM1-831; ALY1-907
246-4208 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)
		S/N AKM832-UP; ALY908-UP
Y		SEPARATE ILLUSTRATION

#SEBP32470724

254-6941: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

254-6941 HYDRAULIC AR-4 VALVE
S/N AKM1235-UP; ALY1335-UP
FOR USE WITH BULLDOZER AR SEMI-UNIVERSAL , COVER GP CONSOLE (IMP), RIPPER
CANNOT BE USED WITH HYDRAULIC AR 2-VALVE, WINCH AR TOWING, COVER GP CONSOLE (WINCH), INSTALLATION AR WINCH
AN ATTACHMENT

i02135350 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
254-8440 Y	[1]	CONTROL AR-PILOT HYDRAULIC
238-0962 Y	[1]	CONTROL AR-PILOT HYDRAULIC
230-8752 Y	[1]	LINES GP-RIPPER
254-7283 Y	[1]	LINES GP-TILT CYLINDER
246-4208 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)

	[2]	PLUG AS
		(EACH INCLUDES)
3D-2824	[1]	SEAL-O-RING
9S-4183	[1]	PLUG (1-1/16-12-THD)
Y		SEPARATE ILLUSTRATION

#SEBP32470725

248-4204: LEVER GP-CONTROL VALVE

LEVER GP-CONTROL VALVE

248-4204 LEVER GP-CONTROL VALVE -BULLDOZER CONTROL
S/N AKM1235-1881; ALY1335-2177
PART OF 235-0889, 240-9651, 240-9653 VALVE GP-PILOT
ALSO AN ATTACHMENT

i02130796 SEBP3247

2484204 LEVER GP-CONTROL VALVE Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-6315	[3]	PIN-ADJUSTMENT
2.	146-6317	[1]	RETAINER
3.	159-3781	[1]	SPRING
4.	199-7834	[1]	DETENT AS
	8S-7499	[2]	PIN-SPRING
5.	260-1847	[1]	LEVER AS
6.	239-9219	[1]	LEVER
7.	191-8920 M	[2]	BOLT-SOCKET HEAD (M6X1X12-MM)
8.	5C-2890 M	[3]	NUT (M6X1-THD)
9.	8T-4244 M	[1]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP32470726

260-1848: LEVER GP-CONTROL VALVE

LEVER GP-CONTROL VALVE

260-1848 LEVER GP-CONTROL VALVE -BULLDOZER
S/N AKM1882-UP; ALY2178-UP
PART OF 240-9651, 240-9653 VALVE GP-PILOT
ALSO AN ATTACHMENT

i02464140 SEBP3247

2601848 LEVER GP-CONTROL VALVE Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-6315	[3]	PIN-ADJUSTMENT
2.	146-6317	[1]	RETAINER
3.	159-3781	[1]	SPRING
4.	8T-4244 M	[1]	NUT (M12X1.75-THD)
5.	199-7834	[1]	DETENT AS
	8S-7499	[2]	PIN-SPRING
6.	239-9219	[1]	LEVER
7.	260-1847	[1]	LEVER AS
8.	191-8920 M	[2]	BOLT-SOCKET HEAD (M6X1X12-MM)
9.	5C-2890 M	[3]	NUT (M6X1-THD)
	M		METRIC PART

#SEBP32470727

110-6113: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

110-6113 LINES GP-ANGLE & TILT
S/N AKM1-1336; B6X1-UP
PART OF 223-6303 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i01621708 SEBP3247

1106113 LINES GP-ANGLE & TILT Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[8]	FITTING-GREASE (1/8-27 PTF)
2.	112-7454 I	[2]	HOSE AS
3.	112-7455 I	[2]	HOSE AS
4.	112-7456 I	[1]	HOSE AS
5.	112-7457 I	[1]	HOSE AS
6.	167-7270	[4]	FILM-INSTRUCTION (NO STEP)
7.	197-2477	[2]	PIN
8.	197-2479 I	[2]	HOSE AS-GREASE
9.	198-6217	[2]	GUARD
10.	200-2645	[1]	GUARD AS
11.	204-5093	[2]	PLATE
12.	222-2773	[1]	CHANNEL AS (RH)
13.	222-2774	[1]	CHANNEL AS (LH)
14.	096-7033	[2]	PIN-COTTER
15.	148-8340	[4]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8639	[1]	CONNECTOR
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
16.	148-8364	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8625	[1]	ELBOW
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
17.	2P-6470	[1]	CLIP (SLOT)
18.	2P-6471	[1]	CLIP (TAB)
19.	3B-6552	[2]	ELBOW-PIPE
20.	3E-4319 M	[1]	STUD-TAPERLOCK (M12X1.75X55-MM)
21.	5P-7466	[7]	CLIP (SLOT)
22.	5P-7467	[7]	CLIP (TAB)
23.	5P-8112	[7]	GROMMET
24.	6V-7687 M	[6]	LOCKNUT (M12X1.75-THD)
25.	6V-8398	[6]	SEAL-O-RING
26.	7G-3832	[2]	GROMMET
27.	7G-3833	[2]	CLIP (TAB)
28.	7G-3834	[2]	CLIP (SLOT)
29.	7Y-1858	[2]	WASHER (21X37X3-MM THK)
30.	8T-4139 M	[9]	BOLT (M12X1.75X30-MM)
31.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
32.	8T-4184 M	[6]	BOLT (M12X1.75X45-MM)
33.	8T-4192 M	[7]	BOLT (M12X1.75X25-MM)
34.	8T-4223	[27]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32470728

110-6113: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

110-6113 LINES GP-ANGLE & TILT
S/N AKM1337-UP; B6X1-UP
PART OF 223-6303 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i02298777 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489 C	[11]	FITTING-GREASE (1/8-27 PTF)(ANGLE, TILT CYLINDERS)
2.	112-7454 I	[2]	HOSE AS
3.	112-7455 I	[2]	HOSE AS
4.	262-0649 CI	[1]	HOSE AS
5.	262-0650 CI	[1]	HOSE AS
6.	167-7270	[4]	FILM-INSTRUCTION (NO STEP)
7.	197-2477	[2]	PIN
8.	197-2479 I	[2]	HOSE AS-GREASE
9.	198-6217	[2]	GUARD
10.	200-2645	[1]	GUARD AS
11.	204-5093	[2]	PLATE
12.	222-2773	[1]	CHANNEL AS (RH)
13.	222-2774	[1]	CHANNEL AS (LH)
14.	096-7033	[2]	PIN-COTTER
15.	148-8340	[4]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8639	[1]	CONNECTOR
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
16.	148-8364	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8625	[1]	ELBOW
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
17.	2P-6470	[1]	CLIP (SLOT)
18.	2P-6471	[1]	CLIP (TAB)
19.	3B-6552	[2]	ELBOW-PIPE
20.	3E-4319 M	[1]	STUD-TAPERLOCK (M12X1.75X55-MM)
21.	5P-7466 C	[5]	CLIP (SLOT)
22.	5P-7467 C	[5]	CLIP (TAB)
23.	5P-8112 C	[5]	GROMMET
24.	6V-7687 M	[6]	LOCKNUT (M12X1.75-THD)
25.	6V-8398	[6]	SEAL-O-RING
26.	7G-3832	[2]	GROMMET
27.	7G-3833	[2]	CLIP (TAB)
28.	7G-3834	[2]	CLIP (SLOT)
29.	7Y-1858	[2]	WASHER (21X37X3-MM THK)
30.	8T-4139 M	[9]	BOLT (M12X1.75X30-MM)
31.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
32.	8T-4184 M	[6]	BOLT (M12X1.75X45-MM)
33.	8T-4192 M	[7]	BOLT (M12X1.75X25-MM)
34.	8T-4223	[27]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[3]	NUT (M12X1.75-THD)
36.	6V-1249 C	[2]	GROMMET (22-MM ID)
37.	5P-7465 C	[2]	CLIP (TAB)
38.	5P-7464 C	[2]	CLIP (SLOT)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32470729

112-3447: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

112-3447 LINES GP-ANGLE & TILT
S/N G6G1-UP; B6L1-UP; AKM1-1348; G6M1-UP; F6W1-99999; F6Y1-99999
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6304, 225-8288, 225-8289, 225-8292 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i01621699 SEBP3247

1123447 LINES GP-ANGLE & TILT Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[8]	FITTING-GREASE (1/8-27 PTF)(ANGLE, TILT CYLINDERS)
2.	114-6435 I	[2]	HOSE AS
3.	114-6436 I	[2]	HOSE AS
4.	114-6438 I	[1]	HOSE AS
5.	114-6440 I	[1]	HOSE AS
6.	167-7270	[4]	FILM-INSTRUCTION (NO STEP)
7.	222-2773	[1]	CHANNEL AS (RH)
8.	222-2774	[1]	CHANNEL AS (LH)
9.	197-2477	[2]	PIN
10.	197-2479 I	[2]	HOSE AS-GREASE
11.	198-6217	[2]	GUARD
12.	200-2645	[1]	GUARD AS
13.	204-5093	[2]	PLATE
14.	096-7033	[2]	PIN-COTTER
15.	148-8340	[4]	CONNECTOR AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8639	[1]	CONNECTOR
16.	148-8364	[2]	ELBOW AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
17.	2P-6470	[1]	CLIP (SLOT)
18.	2P-6471	[1]	CLIP (TAB)
19.	3B-6552	[2]	ELBOW-PIPE
20.	3E-4319 M	[1]	STUD-TAPERLOCK (M12X1.75X55-MM)
21.	5P-7466	[7]	CLIP (SLOT)
22.	5P-7467	[7]	CLIP (TAB)
23.	5P-8112	[7]	GROMMET
24.	6V-7687 M	[6]	LOCKNUT (M12X1.75-THD)
25.	6V-8398	[6]	SEAL-O-RING
26.	7G-3832	[2]	GROMMET
27.	7G-3833	[2]	CLIP (TAB)
28.	7G-3834	[2]	CLIP (SLOT)
29.	7Y-1858	[2]	WASHER (21X37X3-MM THK)
30.	8T-4139 M	[9]	BOLT (M12X1.75X30-MM)
31.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
32.	8T-4192 M	[7]	BOLT (M12X1.75X25-MM)
33.	8T-4223	[27]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	8T-4244 M	[3]	NUT (M12X1.75-THD)
35.	8T-4184 M	[6]	BOLT (M12X1.75X45-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART