262-9873 BULLDOZER AR-PWR ANGLE & TILT -XL-WITH ADJUSTABLE PITCH S/N B6C1-UP 2.5-M FOLDABLE BLADE AN ATTACHMENT D6N

Part No	Qty	Parts name
257-0210 Y	[1]	BLADE GP-ANGLING
110-5226 Y	[1]	C-FRAME GP-POWER ANGLING
228-0320 Y	[2]	CYLINDER GP-ANGLING
		-OR-
321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
295-1830 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
107-8126 J	[2]	BEARING
109-0959 J	[4]	RING
J		PRESS INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME
Y		SEPARATE ILLUSTRATION

#SEBP32470841

267-2837: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

267-2837 BULLDOZER AR-PWR ANGLE & TILT -XL FINE GRADING
S/N B6Y1-UP
FOLDABLE BLADE
AN ATTACHMENT

i02885664 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
257-0210 Y	[1]	BLADE GP-ANGLING
112-7443 Y	[1]	C-FRAME GP-POWER ANGLING
110-3269 Y	[2]	CYLINDER GP-BULLDOZER LIFT
228-0320 Y	[2]	CYLINDER GP-ANGLING
		-OR-
321-7048 Y	[2]	CYLINDER GP-ANGLING (BULLDOZER)
160-0054 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
295-1831 Y	[1]	LINES GP-ANGLE & TILT
220-0897 Y	[1]	LINES GP-LIFT CYLINDER (POWER ANGLE, TILT BLADE)
190-5328 Y	[1]	LINK GP-PITCH
134-6775 Y	[1]	PIN GP-CYLINDER

107-8126	[2]	BEARING (FRAME)
		(BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
109-0959	[4]	RING
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470842

206-9537: BULLDOZER AR-SEMI-UNIVERSAL

BULLDOZER AR-SEMI-UNIVERSAL

206-9537 BULLDOZER AR-SEMI-UNIVERSAL -XL
S/N S6D1-UP
REPLACED BY @@@@@254-7591@@@@@
FOR USE WITH @@@@@229-2831@@@@@, @@@@@230-6111@@@@@, @@@@@254-5857@@@@@, @@@@@254-5856@@@@@, WHEN SOUND SUPRESSION IS NOT REQUIRED, WHEN USED WITH SOUND SUPRESSION AR 169-4912
CANNOT BE USED WITH @@@@@169-4912@@@@@, @@@@@173-8641@@@@@, @@@@@223-6303@@@@@
AN ATTACHMENT

i02137873 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
115-4594 Y	[1]	BLADE & EDGE GP-SEMI-UNIVERSAL
115-3524 Y	[2]	CYLINDER GP-BULLDOZER LIFT
155-7704 Y	[1]	HOOD & GUARD GP
227-0756 Y	[1]	LINES GP-LIFT CYLINDER
115-4564 Y	[1]	LINES GP-TILT CYLINDER
138-7033 Y	[1]	MOUNTING GP-CYLINDER
115-4472 Y	[1]	PUSH ARM GP
142-1229 Y	[1]	TRUNNION GP-BULLDOZER

8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
211-8511	[1]	BRACKET
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP32470843

206-9544: BULLDOZER AR-SEMI-UNIVERSAL

BULLDOZER AR-SEMI-UNIVERSAL

206-9544 BULLDOZER AR-SEMI-UNIVERSAL -XL-SOUND SUPPRESSION
S/N S6S1-UP
FOR USE WITH @@@@@229-2831@@@@@, @@@@@230-6111@@@@@, 169-4912 SUPPRESSION AR-SOUND
CANNOT BE USED WITH 206-9537 BULLDOZER AR-SEMI-UNIVERSAL, 173-8641 HYDRAULIC AR-4 VALVE
AN ATTACHMENT

i01780906 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
115-4594 Y	[1]	BLADE & EDGE GP-SEMI-UNIVERSAL
115-3524 Y	[2]	CYLINDER GP-BULLDOZER LIFT
155-7804 Y	[1]	HOOD & GUARD GP
227-0756 Y	[1]	LINES GP-LIFT CYLINDER
115-4564 Y	[1]	LINES GP-TILT CYLINDER
138-7033 Y	[1]	MOUNTING GP-CYLINDER
115-4472 Y	[1]	PUSH ARM GP
142-1229 Y	[1]	TRUNNION GP-BULLDOZER

8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
211-8511	[1]	BRACKET
	[1]	BRACKET AS (RH)
	[1]	BRACKET AS (LH)
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON BACK OF MOLDBOARD NEAR TOP AT RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP32470844

254-7591: BULLDOZER AR-SEMI-UNIVERSAL

BULLDOZER AR-SEMI-UNIVERSAL

254-7591 BULLDOZER AR-SEMI-UNIVERSAL -XL
S/N B6D1-UP
FOR USE WITH @@@@@254-5856@@@@@, @@@@@254-6940@@@@@, @@@@@254-5857@@@@@, 230-2146, WHEN SOUND SUPPRESSION IS NOT REQUIRED
CANNOT BE USED WITH @@@@@223-6303@@@@@
AN ATTACHMENT

i02103571 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
115-4594 Y	[1]	BLADE & EDGE GP-SEMI-UNIVERSAL
115-3524 Y	[2]	CYLINDER GP-BULLDOZER LIFT
227-0756 Y	[1]	LINES GP-LIFT CYLINDER
115-4564 Y	[1]	LINES GP-TILT CYLINDER
138-7033 Y	[1]	MOUNTING GP-CYLINDER
115-4472 Y	[1]	PUSH ARM GP
142-1229 Y	[1]	TRUNNION GP-BULLDOZER

8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
211-8511	[1]	BRACKET
8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON BACK OF MOLDBOARD NEAR TOP AT RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP32470845

254-7592: BULLDOZER AR-SEMI-UNIVERSAL

BULLDOZER AR-SEMI-UNIVERSAL

254-7592 BULLDOZER AR-SEMI-UNIVERSAL -SOUND SUPPRESSION
S/N B6A1-UP
FOR USE WITH @@@@@254-6941@@@@@, @@@@@254-5856@@@@@, @@@@@254-5857@@@@@, @@@@@121-0351@@@@@, @@@@@254-6940@@@@@, 2302146, WHEN SOUND SUPPRESSION IS NOT REQUIRED
CANNOT BE USED WITH @@@@@223-6303@@@@@, @@@@@206-9537@@@@@
AN ATTACHMENT

i02130531 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
115-4594 Y	[1]	BLADE & EDGE GP-SEMI-UNIVERSAL
1U-1839 Y	[2]	CYLINDER GP-BULLDOZER LIFT
5Q-8084 Y	[1]	LINES GP-LIFT CYLINDER
5Q-8080 Y	[1]	LINES GP-TILT CYLINDER
5Q-8040 Y	[1]	MOUNTING GP-CYLINDER (BULLDOZER)
5Q-8011 Y	[1]	PUSH ARM GP
5Q-8013 Y	[1]	TRUNNION GP-BULLDOZER

8T-7371	[1]	PLATE-SERIAL NUMBER (BULLDOZER)
		(ON BACK OF MOLDBOARD NEAR TOP AT RH END)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)
Y		SEPARATE ILLUSTRATION

#SEBP32470846

110-5226: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

110-5226 C-FRAME GP-POWER ANGLING
S/N B6C1-UP; B6X1-UP
PART OF 223-6303, 262-9873 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i01621670 SEBP3247

1105226 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	200-2649	[1]	FRAME AS
1A.	145-0804	[1]	SLEEVE
2.	089-8249	[2]	SPACER (64X72X13-MM THK)
3.	109-0958	[2]	PIN
4.	4Y-4905 B	[6]	WASHER (79X175X2-MM THK)
5.	104-4746	[2]	DOWEL
6.	108-5794	[4]	PLUG-PIPE
7.	104-7391	[1]	CAP
8.	124-5741	[2]	PIN
9.	8T-4123	[3]	WASHER (22X35X3.5-MM THK)
10.	161-2113	[1]	SPACER (60X89.8X231-MM THK)
11.	160-5691	[1]	PIN
12.	145-0803	[1]	PIN
13.	124-5235 B	[6]	SHIM (0.8-MM THK)
14.	124-5234	[2]	RETAINER
15.	105-2058	[1]	BRACKET AS
16.	298-2764 M	[4]	BOLT (M24X3X190-MM)
17.	8T-1482	[4]	WASHER-HARD (26X50X8-MM THK)
18.	110-5217	[2]	PLATE
19.	110-5218	[2]	PLATE
20.	104-7434	[1]	RETAINER
21.	7X-2562 M	[5]	BOLT (M20X2.5X45-MM)
22.	104-4817	[1]	PIN
23.	8G-5747	[4]	SPACER (45X50X15-MM THK)
24.	8T-4139 M	[6]	BOLT (M12X1.75X30-MM)
25.	8T-5041 M	[2]	BOLT (M12X1.75X120-MM)
26.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	124-5233	[2]	PIN
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP32470847

112-7443: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

112-7443 C-FRAME GP-POWER ANGLING
S/N B6F1-UP; G6G1-UP; B6L1-UP; DPM1-UP; G6M1-UP; F6W1-99999; B6Y1-UP; F6Y1-99999
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6304, 225-8288, 225-8289, 225-8292, 262-9871, 262-9872, 267-2837 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i01782011 SEBP3247

1127443 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	124-5235 B	[6]	SHIM (0.8-MM THK)
2.	089-8249	[2]	SPACER (64X72X13-MM THK)
3.	109-0958	[2]	PIN
4.	8G-5747	[4]	SPACER (45X50X15-MM THK)
5.	104-4746	[2]	DOWEL
6.	108-5794	[4]	PLUG-PIPE
7.	104-7391	[1]	CAP
8.	160-5691	[1]	PIN
9.	161-2113	[1]	SPACER (60X89.8X231-MM THK)
10.	145-0803	[1]	PIN
11.	105-2058	[1]	BRACKET AS
12.	298-2764 M	[4]	BOLT (M24X3X190-MM)
13.	8T-1482	[4]	WASHER-HARD (26X50X8-MM THK)
14.	110-5217	[2]	PLATE
15.	110-5218	[2]	PLATE
16.	104-7434	[1]	RETAINER
17.	7X-2562 M	[5]	BOLT (M20X2.5X45-MM)
18.	104-4817	[1]	PIN
19.	124-5234	[2]	RETAINER
20.	8T-4139 M	[6]	BOLT (M12X1.75X30-MM)
21.	8T-5041 M	[2]	BOLT (M12X1.75X120-MM)
22.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	124-5233	[2]	PIN
24.	8T-4123	[3]	WASHER (22X35X3.5-MM THK)
25.	200-2636 C	[1]	FRAME AS
25A.	8P-9770	[1]	PLATE
25B.	9R-2640 M	[1]	BOSS (M12X1.75X25-MM)
25C.	9R-3572 M	[2]	BOSS (M12X1.75X20-MM)
25D.	104-7423	[1]	TOWER AS
25E.	108-8268	[2]	BRACKET
25F.	124-5240	[2]	PLATE
25G.	145-0804	[1]	SLEEVE
25H.	200-2632	[1]	TOWER AS
25J.	200-2633	[1]	TOWER AS
25K.	224-0683	[2]	STEP AS
26.	4Y-4905 B	[6]	WASHER (79X175X2-MM THK)
27.	124-5741	[2]	PIN
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP32470848

349-2450: LINES GP-GREASE

LINES GP-GREASE

349-2450 LINES GP-GREASE
S/N AKM1-UP; ALY1-UP
PART OF 172-9872, 172-9873, 230-6109, 230-6110 BAR GP-EQUALIZER
ALSO AN ATTACHMENT

i03728301 SEBP3247

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	173-3660 I	[1]	HOSE AS
3.	169-7393	[1]	CONNECTOR AS
	3J-7352	[1]	CONNECTOR
	3J-7354	[1]	SEAL-O-RING
4.	5P-4479	[1]	ELBOW (FLARED-LONG)
5.	6D-3479	[1]	CLIP (LOOP)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP32470849

190-5328: LINK GP-PITCH

LINK GP-PITCH

190-5328 LINK GP-PITCH
S/N B6C1-UP; B6F1-UP; G6G1-UP; B6L1-UP; DPM1-UP; G6M1-UP; F6W1-99999; B6X1-UP; B6Y1-UP; F6Y1-99999
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6303, 223-6304, 225-8288, 225-8289, 225-8292, 262-9871, 262-9872, 262-9873, 267-2837 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i01581543 SEBP3247