AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

183-8350 BULLDOZER AR-PWR ANGLE & TILT S/N BHY1-UP WITH ADJUSTABLE PITCH AN ATTACHMENT D5N TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
C-FRAME GP
BULLDOZER GP
PIN GP
OPERATOR STATION
ADJUSTER GP-STEER & XMSN CONT
SEAT GP

TRACK-TYPE TRACTOR D5N TRACK-TYPE TRACTOR AGG
 D5N XL, LGP TRACK-TYPE TRACTOR AGG00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3248 D5N AGG   (2001)

IMPLEMENTS

BULLDOZER GP
183-8350 BULLDOZER AR-PWR ANGLE & TILT
187-9312 BULLDOZER AR-PWR ANGLE & TILT
263-6341 BULLDOZER AR-PWR ANGLE & TILT
LINK GP-PITCH
104-7425 LINK GP-PITCH
 

#SEBP32480640
 

183-8350: BULLDOZER AR-PWR ANGLE & TILT

183-8350 BULLDOZER AR-PWR ANGLE & TILT
S/N BHY1-UP
WITH ADJUSTABLE PITCH
AN ATTACHMENT
i02065264 SEBP3248
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  108-8585 Y [1] BLADE GP-ANGLING  
  183-8351 Y [1] C-FRAME GP (BULLDOZER)  
  152-6482 Y [2] CYLINDER GP-ANGLING  
    -OR-
  243-2058 Y [2] CYLINDER GP-ANGLING  
  167-7551 Y [2] CYLINDER GP-BULLDOZER LIFT  
  160-0045 Y [1] CYLINDER GP-BULLDOZER TILT  
  187-9050 Y [1] LINES GP-ANGLE & TILT  
  137-9370 Y [1] LINES GP-BULLDOZER  
  104-7425 Y [1] LINK GP-PITCH  
  135-6416 Y [1] PIN GP  
   
  107-8126 [2] BEARING (SPECIAL)  
    (PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32480641
 

187-9312: BULLDOZER AR-PWR ANGLE & TILT

187-9312 BULLDOZER AR-PWR ANGLE & TILT
S/N HGP1-UP
WITH ADJUSTABLE PITCH
AN ATTACHMENT
i02065295 SEBP3248
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-7412 Y [1] BLADE GP-ANGLING  
  104-7435 Y [1] C-FRAME GP-POWER ANGLING (BULLDOZER)  
  152-6482 Y [2] CYLINDER GP-ANGLING  
    -OR-
  243-2058 Y [2] CYLINDER GP-ANGLING  
  167-7551 Y [2] CYLINDER GP-BULLDOZER LIFT  
  160-0045 Y [1] CYLINDER GP-BULLDOZER TILT  
  187-9026 Y [1] LINES GP-ANGLE & TILT  
  137-9370 Y [1] LINES GP-BULLDOZER  
  104-7425 Y [1] LINK GP-PITCH  
  135-6416 Y [1] PIN GP  
   
  107-8126 [2] BEARING (SPECIAL)  
    (PRESSED INTO C-FRAME MOUNTING BORE IN TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32480642
 

263-6341: BULLDOZER AR-PWR ANGLE & TILT

263-6341 BULLDOZER AR-PWR ANGLE & TILT
S/N B5C1-UP
2.5-M FOLDABLE BLADE. ADJUSTABLE PITCH
AN ATTACHMENT
i02322930 SEBP3248
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  259-5967 Y [1] BLADE GP-ANGLING  
  104-7435 Y [1] C-FRAME GP-POWER ANGLING  
  243-2058 Y [2] CYLINDER GP-ANGLING  
  167-7551 Y [2] CYLINDER GP-BULLDOZER LIFT  
  160-0045 Y [1] CYLINDER GP-BULLDOZER TILT  
  187-9026 Y [1] LINES GP-ANGLE & TILT  
  137-9370 Y [1] LINES GP-BULLDOZER  
  104-7425 Y [1] LINK GP-PITCH  
  135-6416 Y [1] PIN GP  
   
  107-8126 [2] BEARING  
    (BEARING MUST BE PRESSED INTO THE C-FRAME MOUNTING BORE IN THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME)
  8T-7371 [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON BACK OF MOLDBOARD NEAR TOP AT RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP32480643
 

183-8351: C-FRAME GP

183-8351 C-FRAME GP -BULLDOZER
S/N BHY1-UP
BULLDOZER
PART OF 183-8350 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01509187 SEBP3248
1838351 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5676 B [12] WASHER (1.781X4X0.06-IN THK)  
2. 4Y-4905 B [12] WASHER (79X175X2-MM THK)  
3. 7P-6711 [8] WASHER (52X108X3-MM THK)  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
6. 089-8249 [2] SPACER (64X72X13-MM THK)  
7. 104-4746 [2] DOWEL  
8. 104-4816 [2] SHIM (35-MM THK)  
9. 104-4817 [1] PIN  
10. 104-7391 [1] CAP  
11. 104-7434 [1] RETAINER  
12. 104-7498 [2] RETAINER  
13. 105-2058 [1] BRACKET AS  
14. 124-5233 [2] PIN  
15. 124-5234 [2] RETAINER  
16. 124-5235 B [6] SHIM (0.8-MM THK)  
17. 124-5741 [2] PIN  
18. 147-4359 [1] PIN  
19. 160-5692 [1] SPACER (60.5X76.5X186-MM THK)  
20. 161-2114 [1] PIN  
21. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
22. 104-4747 [2] PIN  
23. 108-5794 [4] PLUG-PIPE  
24. 7X-2465 M [4] BOLT (M24X3X180-MM)  
25. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
26. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
27. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
28. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 183-8352 [1] FRAME AS  
30. 147-4357 [1] BUSHING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32480644
 

104-7435: C-FRAME GP-POWER ANGLING

104-7435 C-FRAME GP-POWER ANGLING -BULLDOZER
S/N B5C1-UP; HGP1-UP
PART OF 187-9312, 263-6341 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01559919 SEBP3248
1047435 C-FRAME GP-POWER ANGLING Parts scheme 1047435 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5676 B [12] WASHER (1.781X4X0.06-IN THK)  
2. 4Y-4905 B [12] WASHER (79X175X2-MM THK)  
3. 7P-6711 [8] WASHER (52X108X3-MM THK)  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
6. 089-8249 [2] SPACER (64X72X13-MM THK)  
7. 104-4746 [2] DOWEL  
8. 104-4816 [2] SHIM (35-MM THK)(35MM THK)  
9. 104-4817 [1] PIN  
10. 104-7391 [1] CAP  
11. 104-7434 [1] RETAINER  
12. 104-7498 [2] RETAINER  
13. 105-2058 [1] BRACKET AS  
14. 124-5233 [2] PIN  
15. 124-5234 [2] RETAINER  
16. 124-5235 B [6] SHIM (0.8-MM THK)  
17. 124-5741 [2] PIN  
18. 147-4359 [1] PIN  
19. 160-5692 [1] SPACER (60.5X76.5X186-MM THK)  
20. 161-2114 [1] PIN  
21. 200-2641 [1] FRAME AS  
21A. 8P-9770 [1] PLATE  
21B. 9R-2640 M [1] BOSS (M12X1.75X25-MM)(M12X25MM)  
21C. 106-7392 [2] BRACKET  
21D. 200-2639 [1] TOWER AS  
21E. 200-2640 [1] TOWER AS  
21F. 104-4742 [1] TOWER AS  
21G. 147-4357 [1] BUSHING  
21H. 124-5240 [2] PLATE  
21I. 9R-3572 M [1] BOSS (M12X1.75X20-MM)  
22. 104-4747 [2] PIN  
23. 108-5794 [4] PLUG-PIPE  
24. 7X-2465 M [4] BOLT (M24X3X180-MM)  
25. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
26. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
27. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
28. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP32480645
 

104-7425: LINK GP-PITCH

104-7425 LINK GP-PITCH
S/N B5C1-UP; HGP1-UP; BHY1-UP
PART OF 183-8350, 187-9312, 263-6341 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00475732 SEBP3248
1047425 LINK GP-PITCH Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7J-1309 [2] BEARING  
3. 1S-3311 [2] RING-RETAINING  
4. 152-3895 [1] LINK  
 

#SEBP32480646
 

135-6416: PIN GP

135-6416 PIN GP
S/N B5C1-UP; HGP1-UP; BHY1-UP
PART OF 183-8350, 187-9312, 263-6341 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02147191 SEBP3248
1356416 PIN GP Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-0231 [2] RETAINER  
2. 4T-1325 [2] PIN  
3. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

#SEBP32480647
 

124-2354: ADJUSTER GP-CONTROL

124-2354 ADJUSTER GP-CONTROL
S/N AKD1-UP; AGG1-UP
ELECTRIC
PART OF 200-3167, 240-2571 CONTROL GP-STEERING & XMSN
ALSO AN ATTACHMENT
i00516381 SEBP3248
1242354 ADJUSTER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-7702 [4] SEAL-LIP TYPE  
2. 8T-1172 [4] SEAL-LIP TYPE  
3. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
4. 8T-5410 [4] SEAL-LIP TYPE  
5. 8T-9006 M [1] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
6. 9X-6772 [4] STRAP-CABLE  
7. 110-7880 [1] SWITCH AS (ROCKER)(CONSOLE RAISE/LOWER)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES WEDGE & RECEPTACLE AS)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES WEDGE, PLUG AS & INTERFACE SEAL)
8. 149-4889 [1] ACTUATOR AS  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES WEDGE, PLUG AS & INTERFACE SEAL)
9. 122-4268 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
10. 122-4270 [1] BRACKET AS  
  5C-7261 M [4] NUT (M8X1.25-THD)  
10A. 122-6046 [1] MOUNT  
11. 122-4271 [1] KNOB (ARMREST ADJUSTMENT)  
12. 127-7494 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12A. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
12B. 122-6049 [1] MOUNT  
13. 122-6826 [1] PLATE AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
13A. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
13B. 8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 122-6824 [1] PLATE  
15. 122-6825 [1] SPACER  
16. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 124-0799 [1] SPRING  
18. 7X-7729 [4] WASHER (11X25X3-MM THK)  
19. 130-0701 [1] SHAFT  
20. 130-1985 [1] SLEEVE  
21. 130-7975 [4] SLEEVE-BRASS  
22. 130-9989 [4] SLEEVE  
23. 130-9990 [2] SLEEVE  
24. 132-3581 [2] BEARING AS  
25. 133-0155 [1] SHAFT  
26. 133-6595 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
27. 133-6974 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
28. 133-7212 [1] PLATE  
29. 133-7214 [1] SHAFT  
30. 133-7230 [1] SHAFT  
31. 133-7231 [1] PLATE  
32. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
34. 8T-9367 [2] BOLT (1/4-20X2-IN)  
35. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [8] NUT (M10X1.5-THD)  
37. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
38. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
42. 8T-7934 [12] WASHER-HARD (11X21X5-MM THK)  
43. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
44. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
  M   METRIC PART
 

#SEBP32480648
 

173-1028: ADJUSTER GP-SEAT

173-1028 ADJUSTER GP-SEAT
S/N AKD1-UP; AGG1-UP
PART OF 178-0603, 180-7304 SEAT GP
AN ATTACHMENT
i01442827 SEBP3248
1731028 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-8256 [4] SPRING  
2. 117-4492 [1] ROD  
3. 136-1544 [1] LATCH AS (LH)  
4. 156-5545 [1] LATCH AS (RH)  
5. 164-4531 [1] ROD  
6. 170-1112 [1] PLATE AS  
7. 170-1114 [1] HANDLE (SLIDE ADJUSTMENT)  
8. 170-1115 [1] HANDLE (TILT ADJUSTMENT)  
9. 132-0338 [2] WASHER-PLASTIC (13X31.7X0.8-MM THK)  
10. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
11. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
 

#SEBP32480649
 

6W-8505: ADJUSTER GP-SEAT

6W-8505 ADJUSTER GP-SEAT
S/N AKD1-UP; AGG1-UP
PART OF 6W-8502 SUSPENSION GP-SEAT
AN ATTACHMENT
i00411101 SEBP3248
6W8505 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your D5N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8V-4881 [4] ROLLER  
2. 4V-7860 [1] LEVER  
3. 6W-8506 [1] HOUSING AS (LOWER)  
4. 4V-7850 [1] PLATE-SLIDE TRACK  
5. 4V-7855 [1] LATCH AS  
6. 4V-7881 [1] ROD-LATCH  
7. 4V-8256 [2] SPRING  
8. 013-8289 [1] BOLT (1/2-13X0.75-IN)  
9. 4V-7859 [1] ROD-LATCH  
10. 4V-7857 [1] LATCH AS  
11. 5V-1497 [7] RETAINER  
12. 1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
13. 4V-7865 [1] CAP  
 

Information:

Operation and Maintenance Manual
Bulldozer Blade Tip
D5N Track-Type Tractor
Bulldozer Power Angling Tilt Hinge Pins - Lubricate
D5N Track-Type Tractor
Bulldozer Blade Tilt
D5N Track-Type Tractor
Special Instruction
Installation and Removal of the V-PAT Bulldozer{6050}
Installation and Removal of the V-PAT Bulldozer{6050}
Disassembly and Assembly
Bulldozer (VPAT) - Install
D5N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Remove
D5N Track-Type Tractor Machine Systems

Caterpillar Parts SIS Catalog D5N :

VALVE GP-SOLENOID
341-9213 VALVE GP-SOLENOID
VALVE GP-SOLENOID
253-0937 VALVE GP-SOLENOID
VALVE GP-SOLENOID
235-4605 VALVE GP-SOLENOID
VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
VALVE GP-SOLENOID
189-8898 VALVE GP-SOLENOID
VALVE GP-RELIEF
6E-0772 VALVE GP-RELIEF
VALVE GP-RELIEF
225-8026 VALVE GP-RELIEF
VALVE GP-RELIEF
170-3360 VALVE GP-RELIEF
187-9312 BULLDOZER AR-PWR ANGLE & TILT
263-6341 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP
183-8351 C-FRAME GP
C-FRAME GP-POWER ANGLING
104-7435 C-FRAME GP-POWER ANGLING
LINK GP-PITCH
104-7425 LINK GP-PITCH
PIN GP
135-6416 PIN GP
ADJUSTER GP-CONTROL
124-2354 ADJUSTER GP-CONTROL
ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT

Truck sale:

Caterpillar D5N
 
Caterpillar D5N
- Crawler dozers
ZIEGLER CAT
Caterpillar D5NX A, Bulldozer, Bau-Und Bergbauausrüstung
87.550 
Caterpillar D5NX A, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
MICHIGAN CAT
 
98.900 
Caterpillar D5N, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D5N, Construction
58,300 
Caterpillar D5N, Construction
- Crawler dozers
ZIEGLER CAT
Caterpillar D5N FTC, Construction
50,000 
Caterpillar D5N FTC, Construction
- Dozers
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.