HYDRAULIC SYSTEM
HYDRAULIC GPKICKOUT & POSITIONER GP
LINES GP-COUPLER
CYLINDER GP
HYDRAULIC SYSTEM
HYDRAULIC GP#SEBP32800630
251-0672: HYDRAULIC AR-3 VALVE
251-0672 HYDRAULIC AR-3 VALVE
S/N AYL1-UP
FOR USE WITH 250-3728 HYDRAULIC AR-MACHINE, EH ON HMU
S/N AYL1-UP
FOR USE WITH 250-3728 HYDRAULIC AR-MACHINE, EH ON HMU
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32800631
200-1737: HYDRAULIC AR-BIODEGRADABLE OIL
200-1737 HYDRAULIC AR-BIODEGRADABLE OIL
S/N AYL1-UP
FACTORY INSTALLATION ONLY
S/N AYL1-UP
FACTORY INSTALLATION ONLY
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-9617 | [1] | ADAPTER | ||
| 5K-0906 | [3] | BOLT (5/16-18X0.625-IN) | ||
| 200-1743 | [1] | BRACKET | ||
| 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | ||
| 141-6968 | [1] | FILM-IDENTIFICATION (BIODEGRADABLE HYDRAULIC OIL) | ||
| 0N HYDRAULIC TANK NEAR CAP | ||||
| 201-0217 | [1] | FILTER GP-OIL (BIODEGRADABLE HYDRAULIC) | ||
| 200-2672 | [1] | FILTER ELEMENT AS-OIL (BIODEGRADABLE HYDRAULIC) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 7X-0873 | [1] | TEE | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | ||
#SEBP32800632
185-6164: HYDRAULIC AR-COUPLER
185-6164 HYDRAULIC AR-COUPLER
S/N AYL1-UP
S/N AYL1-UP
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32800633
215-1272: HYDRAULIC AR-COUPLER
215-1272 HYDRAULIC AR-COUPLER
S/N AYL1-UP
S/N AYL1-UP
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 192-4615 Y | [1] | ARM & BEARING AS-LIFT | ||
| S/N AYL767-UP | ||||
| 186-9965 | [1] | BLOCK GP | ||
| S/N AYB1-553; AYL1-766 | ||||
| 186-9966 | [1] | BLOCK GP | ||
| S/N AYB1-553; AYL1-766 | ||||
| 215-1275 Y | [1] | LINES GP-COUPLER | ||
| S/N AYL1-766 | ||||
| 231-8534 Y | [1] | LINES GP-COUPLER | ||
| S/N AYL767-UP | ||||
| 204-6379 Y | [1] | WIRING GP-CAB (QUICK COUPLER) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800634
188-0098: HYDRAULIC AR-HIGH LIFT
188-0098 HYDRAULIC AR-HIGH LIFT
S/N AYL1-UP
CANNOT BE USED WITH 185-6164 HYDRAULIC AR, 188-1396 HYDRAULIC AR
S/N AYL1-UP
CANNOT BE USED WITH 185-6164 HYDRAULIC AR, 188-1396 HYDRAULIC AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32800635
250-3728: HYDRAULIC AR-MACHINE
250-3728 HYDRAULIC AR-MACHINE -EH ON HMU
S/N AYL1-UP
PART OF 256-3496 MACHINE AR
S/N AYL1-UP
PART OF 256-3496 MACHINE AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 250-3732 Y | [1] | CAB AR-ENCLOSED ROPS | ||
| 256-2640 Y | [1] | ELECTRONICS GP-POWER TRAIN | ||
| 250-3734 Y | [1] | LINES GP-PILOT (EH ON HMU) | ||
| 180-0156 Y | [1] | SENSOR & MTG GP-LIFT POSITION | ||
| 180-0157 Y | [1] | SENSOR & MTG GP-TILT POSITION | ||
| 208-0834 Y | [1] | VALVE & MTG GP-MAIN CONTROL (2-FUNCTION) | ||
| 211-7762 Y | [1] | WIRING GP-SENSOR (TILT POSITION) | ||
| 9C-6809 M | [1] | BLOCK (M10X1.5-MM) | ||
| 173-2115 | [1] | FLOOR MAT | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800636
191-2921: KICKOUT & POSITIONER GP
191-2921 KICKOUT & POSITIONER GP
S/N AYL1-UP
PART OF 186-3533, 217-0912 ELECTRICAL AR
S/N AYL1-UP
PART OF 186-3533, 217-0912 ELECTRICAL AR
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 2. | 4B-9806 | [4] | SETSCREW-SOCKET (1/4-20X0.25-IN) | |
| 3. | 4V-1939 | [4] | CLAMP | |
| 4. | 4V-4840 | [1] | MAGNET AS | |
| 5. | 5G-7820 | [1] | MAGNET AS | |
| 6. | 107-4749 | [2] | PLATE | |
| 8. | 087-5421 | [1] | PLATE | |
| 9. | 176-5459 Y | [1] | CONTROL GP-POSITION (WORK TOOL) | |
| 10. | 130-5300 | [1] | CLIP | |
| 11. | 131-3253 | [1] | TUBE AS | |
| 12. | 131-3255 | [1] | BRACKET | |
| 13. | 147-2082 | [1] | PLATE | |
| 14. | 191-2914 | [1] | HARNESS AS-SENSOR (LIFT KICKOUT, BUCKET POSITION) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 15. | 234-2461 | [1] | COVER AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 16. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 6V-8132 M | [2] | BOLT (M24X3X120-MM) | |
| 18. | 6V-8237 | [2] | WASHER (26X44X4-MM THK) | |
| 20. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 22. | 8T-4182 M | [3] | BOLT (M10X1.5X45-MM) | |
| 23. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 27. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 28. | 9X-2480 M | [4] | BOLT (M6X1X45-MM) | |
| 29. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP32800637
201-8254: LINES GP-CONNECTING
201-8254 LINES GP-CONNECTING -COUPLER
S/N AYL1-UP
FOR USE WITH @@@@@163-4753@@@@@, @@@@@163-4753@@@@@
S/N AYL1-UP
FOR USE WITH @@@@@163-4753@@@@@, @@@@@163-4753@@@@@
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS#SEBP32800638
235-2710: LINES GP-CONNECTING
235-2710 LINES GP-CONNECTING -COUPLER
S/N AYL1-UP
S/N AYL1-UP
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
| 2. | 6W-2890 | [2] | CAP AS-DUST | |
| 3. | 150-5430 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 163-3343 | [1] | SEAL | ||
| 4. | 236-0424 | [2] | BRACKET AS | |
| 5. | 235-2712 I | [1] | HOSE AS | |
| 6. | 235-8398 I | [1] | HOSE AS | |
| 7. | 2P-1293 | [2] | LOCKNUT (1-3/16-12-THD) | |
| 8. | 4J-0522 | [2] | SEAL-O-RING | |
| 9. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 10. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP32800639
185-6166: LINES GP-COUPLER
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 150-4027 C | [1] | TEE AS | |
| 3E-2310 | [1] | TEE | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 2. | 6C-6251 | [2] | PLATE | |
| 3. | 6V-8627 C | [1] | ELBOW | |
| 4. | 6V-0852 | [1] | CAP-DUST | |
| 5. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 6. | 6V-9829 C | [2] | CAP (ORFS) | |
| 7. | 112-1817 | [3] | VALVE-BALL | |
| 8. | 177-9851 | [1] | BRACKET | |
| 9. | 180-8585 Y | [1] | VALVE GP-DIVERTER (QUICK COUPLER) | |
| 10. | 186-9964 | [1] | BRACKET AS | |
| 7V-2882 | [2] | PLATE AS | ||
| 8T-4967 M | [2] | STUD-WELD (M10X1.5X23-MM) | ||
| 144-4398 | [1] | BRACKET AS | ||
| 8T-6462 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 11. | 187-6067 I | [1] | HOSE AS | |
| 12. | 187-6081 I | [1] | HOSE AS | |
| 13. | 187-6083 I | [1] | HOSE AS | |
| 14. | 192-4446 I | [2] | HOSE AS | |
| 15. | 8T-0164 | [2] | ELBOW | |
| 16. | 187-6086 I | [1] | HOSE AS | |
| 17. | 187-6087 I | [1] | HOSE AS | |
| 18. | 086-9286 | [22] | CLAMP | |
| 19. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 5K-8451 | [1] | CLIP (LOOP) | |
| 21. | 1A-9579 | [11] | BOLT (5/16-18X1.5-IN) | |
| 22. | 2P-1279 | [2] | LOCKNUT (9/16-18-THD) | |
| 23. | 3J-1907 C | [8] | SEAL-O-RING | |
| 24. | 3V-0046 | [11] | PLATE | |
| 25. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 26. | 4J-5477 C | [12] | SEAL-O-RING | |
| 27. | 130-5300 C | [1] | CLIP | |
| 28. | 206-8982 C | [1] | HARNESS AS-WORK TOOL (QUICK COUPLER) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 29. | 148-8336 C | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 30. | 6V-8641 | [5] | CONNECTOR | |
| 31. | 6V-8993 | [2] | UNION | |
| 32. | 7K-1181 C | [5] | STRAP-CABLE | |
| 33. | 7Y-3173 M | [4] | SCREW-BUTTON HEAD (M4X0.7X12-MM) | |
| 34. | 8M-2773 | [1] | CLIP (LOOP) | |
| 35. | 8T-0285 M | [8] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 36. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 38. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 39. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 40. | 8T-5005 M | [2] | BOLT (M10X1.5X70-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
