AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

247-4736 LINES GP-RIDE CONTROL -EH WITH CCS OR HMU STEERING S/N AYL1-UP PART OF 273-9512 CONTROL AR-RIDE, 265-7159 LOGGING AR Type 2 950G II


HYDRAULIC SYSTEM
LINES GP-RIDE CONTROL
LINES GP-CYLINDER
MOTOR GP
TANK GP
VALVE GP-PILOT
PUMP GP

WHEEL LOADER 950G II WHEEL LOADER AYL
 950G II Wheel Loader AYL00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3280 950G II AYL   (1999)

HYDRAULIC SYSTEM

LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
247-4732 LINES GP-RIDE CONTROL
247-4736 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
247-4736 LINES GP-RIDE CONTROL
 

#SEBP32800680
 

247-4736: LINES GP-RIDE CONTROL

247-4736 LINES GP-RIDE CONTROL -EH WITH CCS OR HMU STEERING
S/N AYL1-UP
PART OF 273-9512 CONTROL AR-RIDE, 265-7159 LOGGING AR
Type 2
i02113472 SEBP3280
2474736 LINES GP-RIDE CONTROL Parts scheme 2474736 LINES GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-0199 [1] SPACER  
2. 5V-9221 [1] SPACER (13.8X25X25-MM THK)  
3. 131-3520 [1] BLOCK  
4. 141-1481 Y [1] VALVE GP-SHUTTLE  
5. 207-7019 I [1] HOSE AS  
6. 163-5779 I [1] HOSE AS  
7. 191-0531 I [1] HOSE AS  
8. 207-1810 [1] VALVE GP-CHECK  
9. 214-3329 I [1] HOSE AS  
10. 221-1756 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
11. 224-0672 [1] FILM-WARNING (HIGH PRESSURE, READ OMM, INTL)  
12. 237-2609 [1] TUBE AS  
13. 1P-3705 [1] SEAL-RECTANGULAR  
14. 1P-3707 [1] SEAL-RECTANGULAR  
15. 3J-1907 [3] SEAL-O-RING  
16. 3K-0360 [5] SEAL-O-RING  
17. 4J-0520 [1] SEAL-O-RING  
18. 5K-9090 [5] SEAL-O-RING  
19. 5P-7468 [3] CLIP (SLOT)  
20. 5P-7469 [3] CLIP (TAB)  
21. 5P-8444 [3] GROMMET (37-MM ID)  
22. 6V-8397 [11] SEAL-O-RING  
23. 6V-8398 [9] SEAL-O-RING  
24. 6V-8625 [2] ELBOW  
25. 6V-8639 [1] CONNECTOR  
26. 6V-8723 [1] ELBOW  
27. 6V-8782 [1] TEE  
28. 6V-8944 [1] REDUCER  
29. 6V-9008 [1] ELBOW  
30. 6V-9840 [1] TEE-SWIVEL  
31. 126-6872 [1] TEE  
32. 6V-9873 [1] CONNECTOR  
33. 7M-8485 [3] SEAL-O-RING  
34. 7X-2534 M [2] BOLT (M6X1X50-MM)  
35. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
36. 7X-7729 [5] WASHER (11X25X3-MM THK)  
37. 8C-3206 [2] FLANGE-HALF  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
41. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
42. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
43. 8T-4223 [11] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
45. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
46. 9X-6579 [2] NUT-ORIFICE (7/16-12-THD)  
47. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
48. 151-6937 I [1] HOSE AS  
49. 130-9468 [1] TUBE AS  
50. 161-1903 I [1] HOSE AS  
51. 207-8632 [1] TUBE AS  
52. 214-3326 [1] BRACKET AS  
53. 223-5976 Y [1] VALVE GP-DIVERTER (RIDE CONTROL)  
54. 250-9150 I [1] HOSE AS  
55. 130-5300 [1] CLIP  
56. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
57. 148-8412 [1] REDUCER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-8944 [1] REDUCER  
58. 153-6241 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8C-8989 [1] ELBOW  
59. 3J-7354 [2] SEAL-O-RING  
60. 5P-9297 [1] CLIP (LOOP)  
61. 6V-3265 [1] CLIP  
62. 6V-8636 [1] CONNECTOR  
63. 6V-8785 [1] TEE  
64. 6V-9005 [1] ELBOW  
65. 6V-9200 [1] ELBOW  
66. 6V-9829 [1] CAP (ORFS)  
67. 6V-9843 [1] TEE  
68. 6V-9872 [1] CONNECTOR  
69. 7B-1597 [1] CLIP  
70. 8T-0075 [1] CONNECTOR  
71. 8T-4133 M [1] NUT (M10X1.5-THD)  
72. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
73. 6V-9851 J [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   3 VALVE DESIGN ONLY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800681
 

112-6993: LINES GP-TILT CYLINDER

112-6993 LINES GP-TILT CYLINDER
S/N AYL1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i00729789 SEBP3280
1126993 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3704 [2] SEAL-RECTANGULAR  
2. 1P-3705 [1] SEAL-RECTANGULAR  
3. 6V-0852 [2] CAP-DUST  
4. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
5. 149-2707 C [1] PLATE  
6. 9S-4185 [1] PLUG (3/4-16-THD)  
7. 148-7186 C [1] TUBE AS  
8. 148-7187 C [1] TUBE AS  
9. 148-7188 C [2] BRACKET  
10. 148-7189 C [1] BRACKET  
11. 149-2706 CI [1] HOSE AS  
12. 130-6419 I [1] HOSE AS  
13. 149-2705 C [1] TUBE AS  
14. 1P-4579 [2] FLANGE-HALF  
15. 3J-1907 [2] SEAL-O-RING  
16. 3K-0360 [1] SEAL-O-RING  
17. 5P-1076 C [2] WASHER-HARD (13.5X30X4-MM THK)  
18. 4J-0522 C [4] SEAL-O-RING  
19. 4J-0524 [1] SEAL-O-RING  
20. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
21. 6V-0397 C [6] FLANGE-HALF  
22. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
23. 8T-4121 C [6] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
25. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
26. 8T-4184 CM [4] BOLT (M12X1.75X45-MM)  
27. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
28. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
29. 8T-4139 CM [2] BOLT (M12X1.75X30-MM)  
30. 8T-4223 C [32] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP32800682
 

151-0884: LINES GP-TILT CYLINDER

151-0884 LINES GP-TILT CYLINDER
S/N AYL1-UP
PART OF 202-8010, 234-0425 HYDRAULIC AR-3 VALVE, 265-7159 LOGGING AR
i01046354 SEBP3280
1510884 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [2] CAP-DUST  
2. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
3. 150-1280 [2] WASHER-HARD (26X44X22-MM THK)  
4. 148-7186 [1] TUBE AS  
5. 148-7187 [1] TUBE AS  
6. 148-7188 [2] BRACKET  
7. 148-7189 [1] BRACKET  
8. 149-2707 [1] PLATE  
9. 151-0869 [1] TUBE AS  
10. 151-0870 I [1] HOSE AS  
11. 151-0871 I [1] HOSE AS  
12. 153-9460 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
13. 153-9462 [2] CLAMP  
14. 1P-3704 [3] SEAL-RECTANGULAR  
15. 3J-1907 [2] SEAL-O-RING  
16. 3K-0360 [1] SEAL-O-RING  
17. 4J-0522 [5] SEAL-O-RING  
18. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
19. 6V-0397 [8] FLANGE-HALF  
20. 6V-8237 [2] WASHER (26X44X4-MM THK)  
21. 7X-2454 M [2] BOLT (M24X3X110-MM)  
22. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
24. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
25. 8T-4183 M [16] BOLT (M12X1.75X40-MM)  
26. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
27. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
28. 8T-4223 [32] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
30. 9S-4185 [1] PLUG (3/4-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP32800683
 

191-2943: MOTOR GP-GEAR

191-2943 MOTOR GP-GEAR -HYDRAULIC FAN
S/N AYL1-UP
PART OF 185-1547, 189-6650 RADIATOR & FAN GP
i01478231 SEBP3280
1912943 MOTOR GP-GEAR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-9029 M [4] BOLT  
2. 136-9030 [4] WASHER (12.5X18X1.5-MM THK)  
3. 150-3378 J [1] SEAL-SHAFT  
4. 096-0194 J [1] RING-RETAINING  
5. 9S-4191 [1] PLUG (9/16-18-THD)  
6. 3J-1907 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  194-9632 J [1] KIT-SEAL  
  J   REPAIR KIT(S) MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP32800684
 

200-6383: MOUNTING GP-HYDRAULIC TANK

200-6383 MOUNTING GP-HYDRAULIC TANK
S/N AYL1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i01477467 SEBP3280
2006383 MOUNTING GP-HYDRAULIC TANK Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-2706 [1] BRACKET AS  
2. 194-7057 [1] BRACKET AS  
  8T-6462 M [1] BOSS-WELD (M10X1.5X25-MM)  
3. 7X-2553 M [10] BOLT (M16X2X40-MM)  
4. 8T-4779 M [2] BOLT (M16X2X35-MM)  
5. 9X-8257 [12] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP32800685
 

147-2038: PIVOT GP-PILOT VALVE

147-2038 PIVOT GP-PILOT VALVE -TILT
S/N AYL1-UP
PART OF 213-8189 VALVE GP-PILOT
i01852288 SEBP3280
1472038 PIVOT GP-PILOT VALVE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-4189 [1] PLATE  
2. 141-7481 [1] SPACER  
3. 146-6315 [2] PIN-ADJUSTMENT  
4. 146-8479 [1] SWIVEL  
5. 153-8941 [1] WASHER  
6. 159-3781 [1] SPRING  
7. 5C-2890 M [2] NUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP32800686
 

147-3322: PLATE GP-PILOT VALVE

147-3322 PLATE GP-PILOT VALVE -JOYSTICK
S/N AYL1-UP
PART OF 213-8189, 213-8190 VALVE GP-PILOT
i01859886 SEBP3280
1473322 PLATE GP-PILOT VALVE Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [4] NUT (M6X1-THD)  
2. 146-6315 [3] PIN-ADJUSTMENT  
3. 153-8945 [3] PLUNGER AS  
    (EACH INCLUDES)
  3H-7180 [1] SETSCREW (1/4-28X0.25-IN)  
  6J-9996 [1] SPRING  
4. 178-7877 M [1] SETSCREW (M6X1X25-MM)  
5. 146-6317 [3] RETAINER  
6. 159-3781 [3] SPRING  
  M   METRIC PART
 

#SEBP32800687
 

112-6995: PUMP & MTG GP-HYDRAULIC

112-6995 PUMP & MTG GP-HYDRAULIC
S/N AYL1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i01025664 SEBP3280
1126995 PUMP & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-7913 [1] BRACKET AS  
2. 167-0995 YC [1] PUMP GP-PISTON & VANE  
3. 5F-3106 [1] SEAL-O-RING  
4. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
5. 7X-7729 [2] WASHER (11X25X3-MM THK)  
6. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
7. 8T-4244 M [2] NUT (M12X1.75-THD)  
8. 8T-7338 M [2] BOLT (M16X2X45-MM)  
9. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800688
 

238-8681: PUMP & MTG GP-HYDRAULIC

238-8681 PUMP & MTG GP-HYDRAULIC
S/N AYL1243-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i02003820 SEBP3280
2388681 PUMP & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-8209 [1] COUPLING-SHAFT  
2. 167-0994 Y [1] PUMP GP-PISTON (STEERING)  
3. 231-6587 Y [1] PUMP GP-GEAR (IMPLEMENT, PILOT, BRAKE)  
4. 240-4730 I [1] HOSE AS  
5. 240-9019 [1] BRACKET AS  
6. 117-8801 [1] SEAL-O-RING  
7. 148-8446 [1] TEE AS-SWIVEL  
  6V-9838 [1] TEE-SWIVEL  
  7J-9108 [2] SEAL-O-RING  
8. 3K-0360 [2] SEAL-O-RING  
9. 5F-3106 [1] SEAL-O-RING  
10. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
11. 6V-8632 [2] CONNECTOR  
12. 7J-9108 [2] SEAL-O-RING  
13. 7X-7729 [2] WASHER (11X25X3-MM THK)  
14. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
15. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
16. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
17. 8T-7338 M [4] BOLT (M16X2X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP32800689
 

173-0975: PUMP & MTG GP-HYDRAULIC FAN

173-0975 PUMP & MTG GP-HYDRAULIC FAN
S/N AYL1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i01474863 SEBP3280
1730975 PUMP & MTG GP-HYDRAULIC FAN Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-8088 [1] SPACER (11.66X15.88X18-MM THK)  
2. 093-0386 [2] WASHER-PLATED (11X25X4.5-MM THK)  
3. 191-2942 Y [1] PUMP GP-PISTON (HYDRAULIC FAN)  
4. 245-7456 [1] ADAPTER  
5. 191-3678 [1] GEAR (50-TEETH)  
6. 191-3679 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
8. 3D-0053 [1] BALL BEARING  
9. 3D-2824 [1] SEAL-O-RING  
10. 6V-8467 [1] SEAL-O-RING  
11. 8T-2883 [1] TEE  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
15. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
16. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
19. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G II :

247-4736 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
247-4732 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
223-3312 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
223-3312 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
223-3312 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
223-3312 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
223-3311 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
223-3311 LINES GP-RIDE CONTROL
LINES GP-TILT CYLINDER
112-6993 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
151-0884 LINES GP-TILT CYLINDER
MOTOR GP-GEAR
191-2943 MOTOR GP-GEAR
MOUNTING GP-HYDRAULIC TANK
200-6383 MOUNTING GP-HYDRAULIC TANK
PIVOT GP-PILOT VALVE
147-2038 PIVOT GP-PILOT VALVE
PLATE GP-PILOT VALVE
147-3322 PLATE GP-PILOT VALVE
PUMP & MTG GP-HYDRAULIC
112-6995 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-HYDRAULIC
238-8681 PUMP & MTG GP-HYDRAULIC

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.