AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

153-7966 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH S/N APN1-UP PART OF 184-7317 CONTROL AR-HYDRAULIC AN ATTACHMENT 143H


HYDRAULIC SYSTEM
VALVE & LINKAGE GP

MOTOR GRADER 143H MOTOR GRADER APN
 143H Motor Grader APN00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3297 143H APN   (2001)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
143-8938 VALVE & LINKAGE GP
VALVE & LINKAGE GP
153-7964 VALVE & LINKAGE GP
VALVE & LINKAGE GP
153-7966 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0421 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0422 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0423 VALVE & LINKAGE GP
 

#SEBP32970790
 

153-7966: VALVE & LINKAGE GP

153-7966 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH
S/N APN1-UP
PART OF 184-7317 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00855784 SEBP3297
1537966 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 3F-9556 [26] LOCKWASHER  
14. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
15. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
16. 7H-3641 [13] END-ROD (5/16-24-THD)  
17. 8D-5632 [2] LEVER  
18. 8D-5633 [2] LEVER  
19. 8D-5634 [2] LEVER  
20. 8D-5636 B [4] SHIM (0.254-MM THK)  
21. 8D-5637 B [4] SHIM (0.762-MM THK)  
22. 8D-5640 [15] BEARING  
23. 8D-5641 [13] BEARING  
24. 8L-8598 [13] ROD END  
25. 8W-0456 [4] SHAFT  
26. 8X-5499 [2] RETAINER  
27. 9M-1853 [6] MOUNTING  
28. 101-2457 [2] LEVER  
29. 101-2458 [3] LEVER  
30. 103-1597 [2] LEVER  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
34. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
35. 137-4515 [2] BUSHING  
36. 137-4517 [1] SHAFT  
37. 146-0705 [13] ROD  
38. 153-8911 Y [1] VALVE GP-BANK 6 (RH)  
39. 153-8912 Y [1] VALVE GP-BANK 7 (LH)  
40. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
41. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
42. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
43. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
44. 6V-8186 [13] NUT-FULL (5/16-24-THD)  
45. 6V-8188 [2] NUT (1/2-13-THD)  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
51. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970791
 

250-0421: VALVE & LINKAGE GP

250-0421 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N APN1-UP
AN ATTACHMENT
i02225513 SEBP3297
2500421 VALVE & LINKAGE GP Parts scheme 2500421 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [16] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [10] BEARING  
10. 8D-5641 [8] BEARING  
11. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5498 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0543 Y [1] VALVE GP-BANK 4 (LH)  
27. 250-0544 Y [1] VALVE GP-BANK 4 (RH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
29. 153-1818 [1] ELBOW  
30. 206-5123 [4] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6755 [1] KNOB-CENTERSHIFT  
37. 2G-6756 [1] KNOB-WHEEL LEAN  
38. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
39. 3J-1907 [4] SEAL-O-RING  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 6V-8397 [8] SEAL-O-RING  
45. 6V-9836 [2] TEE-SWIVEL  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [3] CONNECTOR  
51. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970792
 

250-0422: VALVE & LINKAGE GP

250-0422 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N APN1-UP
AN ATTACHMENT
i02225538 SEBP3297
2500422 VALVE & LINKAGE GP Parts scheme 2500422 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [16] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [10] BEARING  
10. 8D-5641 [8] BEARING  
11. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5498 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0545 Y [1] VALVE GP-BANK 4 (LH)  
27. 250-0546 Y [1] VALVE GP-BANK 4 (RH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
29. 153-1818 [1] ELBOW  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  206-5122 [1] TEE  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6755 [1] KNOB-CENTERSHIFT  
37. 2G-6756 [1] KNOB-WHEEL LEAN  
38. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
39. 3J-1907 [4] SEAL-O-RING  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 6V-8397 [8] SEAL-O-RING  
45. 6V-9836 [2] TEE-SWIVEL  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [3] CONNECTOR  
51. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970793
 

250-0423: VALVE & LINKAGE GP

250-0423 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N APN1-UP
AN ATTACHMENT
i02225978 SEBP3297
2500423 VALVE & LINKAGE GP Parts scheme 2500423 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [2] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [2] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  8L-8598 [1] ROD END  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
14A. 101-2457 [1] LEVER (SCARIFIER)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 244-2585 [1] TUBE AS  
23. 244-2589 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0546 Y [1] VALVE GP-BANK 4 (RH)  
27. 250-0547 Y [1] VALVE GP-BANK 5 (LH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 153-1818 [1] ELBOW  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6753 [1] KNOB-SCARIFIER  
37. 2G-6755 [1] KNOB-CENTERSHIFT  
38. 2G-6756 [1] KNOB-WHEEL LEAN  
39. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
40. 3J-1907 [4] SEAL-O-RING  
41. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
42. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
43. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
44. 6V-8188 [2] NUT (1/2-13-THD)  
45. 6V-8397 [8] SEAL-O-RING  
46. 6V-9836 [2] TEE-SWIVEL  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
48. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
50. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-9041 [3] CONNECTOR  
52. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
53. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970794
 

250-0424: VALVE & LINKAGE GP

250-0424 VALVE & LINKAGE GP -5-BANK, RH; 4-BANK, LH
S/N APN1-UP
AN ATTACHMENT
i02225965 SEBP3297
2500424 VALVE & LINKAGE GP Parts scheme 2500424 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (PLOW, DOZER)  
15A. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2593 [1] TUBE AS  
25. 244-2597 [1] TUBE AS  
26. 250-0543 Y [1] VALVE GP-BANK 4 (LH)  
27. 250-0548 Y [1] VALVE GP-BANK 5 (RH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
29. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
30. 2G-6747 [1] KNOB-BLADE TIP  
31. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
32. 2G-6749 [1] KNOB-SIDESHIFT  
33. 2G-6751 [1] KNOB-CIRCLE DRIVE  
34. 2G-6752 [1] KNOB-ARTICULATION  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 2G-6755 [1] KNOB-CENTERSHIFT  
37. 2G-6756 [1] KNOB-WHEEL LEAN  
38. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
39. 3J-1907 [4] SEAL-O-RING  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 6V-8397 [8] SEAL-O-RING  
45. 6V-9836 [2] TEE-SWIVEL  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [4] CONNECTOR  
51. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970795
 

250-0425: VALVE & LINKAGE GP

250-0425 VALVE & LINKAGE GP -5-BANK, RH; 4-BANK, LH
S/N APN1-UP
AN ATTACHMENT
i02225665 SEBP3297
2500425 VALVE & LINKAGE GP Parts scheme 2500425 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (PLOW, DOZER)  
15A. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2593 [1] TUBE AS  
25. 244-2597 [1] TUBE AS  
26. 250-0545 Y [1] VALVE GP-BANK 4 (LH)  
27. 250-0549 Y [1] VALVE GP-BANK 5 (RH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
29. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
30. 2G-6747 [1] KNOB-BLADE TIP  
31. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
32. 2G-6749 [1] KNOB-SIDESHIFT  
33. 2G-6751 [1] KNOB-CIRCLE DRIVE  
34. 2G-6752 [1] KNOB-ARTICULATION  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 2G-6755 [1] KNOB-CENTERSHIFT  
37. 2G-6756 [1] KNOB-WHEEL LEAN  
38. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
39. 3J-1907 [4] SEAL-O-RING  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 6V-8397 [8] SEAL-O-RING  
45. 6V-9836 [2] TEE-SWIVEL  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [4] CONNECTOR  
51. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970796
 

250-0426: VALVE & LINKAGE GP

250-0426 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N APN1-UP
PART OF 250-0445 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02225632 SEBP3297
2500426 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, LH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, RH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (RIPPER)  
14A. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 244-2585 [1] TUBE AS  
23. 244-2589 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0544 Y [1] VALVE GP-BANK 4 (RH)  
27. 250-0550 Y [1] VALVE GP-BANK 5 (LH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 153-1818 [1] ELBOW  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6740 [1] KNOB-RIPPER  
32. 2G-6747 [1] KNOB-BLADE TIP  
33. 2G-6748 [1] KNOB-BLADE LIFT  
34. 2G-6749 [1] KNOB-SIDESHIFT  
35. 2G-6751 [1] KNOB-CIRCLE DRIVE  
36. 2G-6752 [1] KNOB-ARTICULATION  
37. 2G-6755 [1] KNOB-CENTERSHIFT  
38. 2G-6756 [1] KNOB-WHEEL LEAN  
39. 2G-6757 [1] KNOB-BLADE LIFT  
40. 3J-1907 [4] SEAL-O-RING  
41. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
42. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
43. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
44. 6V-8188 [2] NUT (1/2-13-THD)  
45. 6V-8397 [8] SEAL-O-RING  
46. 6V-9836 [2] TEE-SWIVEL  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
48. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
50. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-9041 [3] CONNECTOR  
52. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
53. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970797
 

250-0427: VALVE & LINKAGE GP

250-0427 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N APN1-UP
PART OF 250-0446 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02226139 SEBP3297
2500427 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, LH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, RH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (RIPPER)  
14A. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 244-2585 [1] TUBE AS  
23. 244-2589 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0546 Y [1] VALVE GP-BANK 4 (RH)  
27. 250-0551 Y [1] VALVE GP-BANK 5 (LH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 153-1818 [1] ELBOW  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6740 [1] KNOB-RIPPER  
32. 2G-6747 [1] KNOB-BLADE TIP  
33. 2G-6748 [1] KNOB-BLADE LIFT  
34. 2G-6749 [1] KNOB-SIDESHIFT  
35. 2G-6751 [1] KNOB-CIRCLE DRIVE  
36. 2G-6752 [1] KNOB-ARTICULATION  
37. 2G-6755 [1] KNOB-CENTERSHIFT  
38. 2G-6756 [1] KNOB-WHEEL LEAN  
39. 2G-6757 [1] KNOB-BLADE LIFT  
40. 3J-1907 [4] SEAL-O-RING  
41. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
42. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
43. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
44. 6V-8188 [2] NUT (1/2-13-THD)  
45. 6V-8397 [8] SEAL-O-RING  
46. 6V-9836 [2] TEE-SWIVEL  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
48. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
50. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-9041 [3] CONNECTOR  
52. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
53. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970798
 

250-0428: VALVE & LINKAGE GP

250-0428 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N APN1-UP
AN ATTACHMENT
i02226648 SEBP3297
2500428 VALVE & LINKAGE GP Parts scheme 2500428 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, LH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, RH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [12] BEARING  
10. 8D-5641 [10] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (SCARIFIER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (BLADE TIP)  
16A. 101-2458 [1] LEVER (PLOW, DOZER)  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
23. 244-2585 [1] TUBE AS  
24. 244-2589 [1] TUBE AS  
25. 244-2593 [1] TUBE AS  
26. 244-2597 [1] TUBE AS  
27. 250-0547 Y [1] VALVE GP-BANK 5 (LH)  
28. 250-0549 Y [1] VALVE GP-BANK 5 (RH)  
29. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6753 [1] KNOB-SCARIFIER  
37. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
38. 2G-6755 [1] KNOB-CENTERSHIFT  
39. 2G-6756 [1] KNOB-WHEEL LEAN  
40. 2G-6757 [1] KNOB-BLADE LIFT  
41. 3J-1907 [4] SEAL-O-RING  
42. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
43. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
44. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
45. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
46. 6V-8188 [2] NUT (1/2-13-THD)  
47. 6V-8397 [8] SEAL-O-RING  
48. 6V-9836 [2] TEE-SWIVEL  
49. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
50. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
52. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
53. 8T-9041 [4] CONNECTOR  
54. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
55. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP32970799
 

250-0429: VALVE & LINKAGE GP

250-0429 VALVE & LINKAGE GP -6-BANK, RH; 4-BANK, LH
S/N APN1-UP
AN ATTACHMENT
i02226146 SEBP3297
2500429 VALVE & LINKAGE GP Parts scheme 2500429 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 143H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [12] BEARING  
10. 8D-5641 [10] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (BLADE TIP)  
16A. 101-2458 [1] LEVER (PLOW, BULLDOZER LIFT)  
17. 103-1597 [1] LEVER (PLOW, BULLDOZER ANGLE)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
24. 244-2584 [1] TUBE AS  
25. 244-2588 [1] TUBE AS  
26. 244-2594 [1] TUBE AS  
27. 244-2598 [1] TUBE AS  
28. 250-0545 Y [1] VALVE GP-BANK 4 (LH)  
29. 250-0552 Y [1] VALVE GP-BANK 6 (RH)  
30. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
31. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
32. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
33. 2G-6747 [1] KNOB-BLADE TIP  
34. 2G-6748 [1] KNOB-BLADE LIFT  
35. 2G-6749 [1] KNOB-SIDESHIFT  
36. 2G-6751 [1] KNOB-CIRCLE DRIVE  
37. 2G-6752 [1] KNOB-ARTICULATION  
38. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
39. 2G-6755 [1] KNOB-CENTERSHIFT  
40. 2G-6756 [1] KNOB-WHEEL LEAN  
41. 2G-6757 [1] KNOB-BLADE LIFT  
42. 3J-1907 [4] SEAL-O-RING  
43. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
44. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
45. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
46. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
47. 6V-8188 [2] NUT (1/2-13-THD)  
48. 6V-8397 [8] SEAL-O-RING  
49. 6V-9836 [2] TEE-SWIVEL  
50. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
51. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
53. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
54. 8T-9041 [4] CONNECTOR  
55. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
56. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 143H :

VALVE & LINKAGE GP
153-7964 VALVE & LINKAGE GP
VALVE & LINKAGE GP
143-8938 VALVE & LINKAGE GP
VALVE & LINKAGE GP
132-6478 VALVE & LINKAGE GP
VALVE & LINKAGE GP
125-2236 VALVE & LINKAGE GP
VALVE & LINKAGE GP
125-2235 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-3814 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-3771 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-0311 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0421 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0422 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0423 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0424 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0425 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0426 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0427 VALVE & LINKAGE GP
VALVE & LINKAGE GP
250-0428 VALVE & LINKAGE GP

Truck sale:

Caterpillar 143H
 
Caterpillar 143H
- motor graders
MICHIGAN CAT
Caterpillar 143H, motor graders, Construction
108,000 
Caterpillar 143H, motor graders, Construction
- motor graders
BUTLER MACHINERY COMPANY
Caterpillar 143H-00, motor graders, Construction
96,000 
Caterpillar 143H-00, motor graders, Construction
- motor graders
QUINN COMPANY
Caterpillar 143H, motor graders, Construction
80,000 
Caterpillar 143H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO
 
89,000 
Caterpillar 143H, motor graders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.