AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-1726 PUMP GP-MAIN HYDRAULIC S/N CKE1112-UP PART OF 195-0019 PUMP & MTG GP-MAIN HYDRAULIC Type 1 AN ATTACHMENT 311C


HYDRAULIC SYSTEM
PUMP GP
FILTER GP
VALVE GP-CONTROL

EXCAVATOR 311C EXCAVATOR CKE
 311C U Excavator CKE00001-UP (MACHINE) POWERED BY 3064 Engine SEBP3325 311C CKE   (2000)

HYDRAULIC SYSTEM

PUMP GP
PUMP & MTG GP-MAIN HYDRAULIC
195-0019 PUMP & MTG GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC
PUMP GP-PISTON
176-8134 PUMP GP-PISTON
PUMP GP-PISTON
176-8134 PUMP GP-PISTON
 

#SEBP33250410
 

185-1726: PUMP GP-MAIN HYDRAULIC

185-1726 PUMP GP-MAIN HYDRAULIC
S/N CKE1112-UP
PART OF 195-0019 PUMP & MTG GP-MAIN HYDRAULIC
Type 1
AN ATTACHMENT
i02296058 SEBP3325
1851726 PUMP GP-MAIN HYDRAULIC Parts scheme 1851726 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-8802 [1] SHAFT-INPUT  
2. 199-7460 [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 9S-4191 [3] PLUG (9/16-18-THD)  
5. 3J-1907 [3] SEAL-O-RING  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 7X-2553 M [6] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 6V-7991 [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 165-3852 [2] BEARING AS-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 222-2063 C [1] SHAFT-DRIVE  
18. 207-2985 [2] ORIFICE  
19. 176-0581 [1] CASE  
20. 165-2793 [2] RETAINER  
21. 165-2794 [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 2H-9247 [2] SEAL-O-RING  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 [12] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 190-4896 [2] PLUG  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 M [1] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
44. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
49. 222-2062 C [1] COUPLING  
50. 8T-3338 [2] SEAL-O-RING  
51. 170-6738 [1] SPACER  
52. 218-0557 [1] PUMP GP-GEAR  
  353-5511 [1] KIT-SEAL  
  3G-5083 [1] SEAL-LIP TYPE  
  9T-0836 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33250411
 

185-1726: PUMP GP-MAIN HYDRAULIC

185-1726 PUMP GP-MAIN HYDRAULIC
S/N CKE1112-UP
PART OF 195-0019 PUMP & MTG GP-MAIN HYDRAULIC
Type 2
AN ATTACHMENT
i02903778 SEBP3325
1851726 PUMP GP-MAIN HYDRAULIC Parts scheme 1851726 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
2. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)  
3. 379-3002 [2] PISTON AS  
4. 298-5732 [2] RETAINER-BALL  
5. 165-2801 [2] BEARING-ROLLER  
6. 353-5837 [1] SEAL-LIP TYPE  
7. 165-2805 [2] BLOCK  
8. 165-3838 [1] BARREL AS  
9. 165-3839 [1] BARREL AS  
10. 353-5829 [2] GUIDE-BALL  
13. 267-8084 [2] BEARING-NEEDLE  
14. 165-3853 [1] COVER  
15. 170-6738 [1] SPACER  
16. 173-1203 J [1] PUMP GP-GEAR (BLADE)  
17. 174-7212 Y [2] ACTUATOR GP-PUMP  
19. 176-8131 [2] SPACER-SPECIAL  
20. 176-8132 [2] BEARING  
21. 267-1629 [1] SHAFT-DRIVEN  
23. 190-4896 C [2] PLUG  
24. 199-0518 C [2] SEAL-O-RING  
25. 207-2985 [2] ORIFICE  
26. 218-0557 N [1] PUMP GP-GEAR (PILOT)  
27. 222-2062 [1] COUPLING  
28. 267-1628 [1] SHAFT-DRIVE  
29. 273-8315 C [2] SEAL-O-RING  
30. 282-9192 C [1] CASE-FLANGE  
31. 311-7409 C [1] BLOCK-PORT  
32. 094-1875 [6] DOWEL  
33. 094-1882 C [15] PLUG  
34. 095-1663 [1] SEAL-O-RING  
36. 165-2799 [12] SPRING  
37. 189-9763 C [4] SEAL-O-RING  
38. 1H-7339 [1] SEAL-O-RING  
39. 1J-6472 [2] RING-RETAINING  
40. 273-8320 C [1] SEAL-O-RING  
41. 3J-1907 [2] SEAL-O-RING  
42. 6V-8144 [2] RING-RETAINING  
43. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
44. 7X-2553 CM [5] BOLT (M16X2X40-MM)  
45. 7X-2556 CM [1] BOLT (M16X2X100-MM)  
46. 8C-3338 [4] DOWEL  
47. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
49. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
50. 8T-4140 CM [2] BOLT (M16X2X60-MM)  
51. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
52. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
53. 8T-7547 CM [4] BOLT (M8X1.25X30-MM)  
54. 8T-9599 [1] RING-RETAINING  
55. 9S-4191 [2] PLUG (9/16-18-THD)  
56. 269-2433 [4] BEARING-CRADLE  
57. 268-6265 [1] PLATE  
58. 268-6263 [2] CAM  
59. 192-0573 [4] PIN-DOWEL  
   
    AVAILABLE REPAIR KIT(S):
  327-8740 J [1] KIT-SEAL (GEAR PUMP)  
    (INCLUDES GASKETS, SEALS & RETAINER RING)
  353-5511 N [1] KIT-SEAL  
    (INCLUDES GASKETS, SEAL & RETAINER RING)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE(S) PARTS MARKED J
  M   METRIC PART
  N   KIT MARKED N SERVICE(S) PARTS MARKED N
  Y   SEPARATE ILLUSTRATION
 

#SEBP33250412
 

176-8134: PUMP GP-PISTON

176-8134 PUMP GP-PISTON -MAIN HYDRAULIC
S/N CKE1-1111
PART OF 162-6312 PUMP & MTG GP-MAIN HYDRAULIC
i01472183 SEBP3325
1768134 PUMP GP-PISTON Parts scheme 1768134 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-8802 [1] SHAFT-INPUT  
2. 199-7460 [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 8T-3338 [1] SEAL-O-RING  
5. 203-5618 [1] COVER  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
8. 7X-2553 M [6] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 6V-7991 [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 165-3852 [2] BEARING AS-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 190-4896 [2] PLUG  
18. 207-2985 [2] ORIFICE  
19. 176-0581 [1] CASE  
20. 165-2793 [2] RETAINER  
21. 165-2794 [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 2H-9247 [2] SEAL-O-RING  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 [12] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 192-4449 [1] SHAFT-DRIVE  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 M [1] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 9S-4191 [3] PLUG (9/16-18-THD)  
44. 3J-1907 [3] SEAL-O-RING  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)(FLOW CONTROL)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33250413
 

176-8134: PUMP GP-PISTON

176-8134 PUMP GP-PISTON -MAIN HYDRAULIC
S/N CKE1112-1893
PART OF 162-6312 PUMP & MTG GP-MAIN HYDRAULIC
i02296053 SEBP3325
1768134 PUMP GP-PISTON Parts scheme 1768134 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-8802 [1] SHAFT-INPUT  
2. 199-7460 [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 225-6216 C [1] GASKET  
5. 165-2804 C [1] FLANGE  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
8. 7X-2553 M [6] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 6V-7991 [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 165-3852 [2] BEARING AS-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 190-4896 [2] PLUG  
18. 207-2985 [2] ORIFICE  
19. 176-0581 [1] CASE  
20. 165-2793 [2] RETAINER  
21. 165-2794 [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 2H-9247 [2] SEAL-O-RING  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 [12] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 222-2063 C [1] SHAFT-DRIVE  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 M [1] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 9S-4191 [3] PLUG (9/16-18-THD)  
44. 3J-1907 [3] SEAL-O-RING  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)(FLOW CONTROL)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33250414
 

176-8134: PUMP GP-PISTON

176-8134 PUMP GP-PISTON -MAIN HYDRAULIC
S/N CKE1894-1903
PART OF 162-6312 PUMP & MTG GP-MAIN HYDRAULIC
i02888425 SEBP3325
1768134 PUMP GP-PISTON Parts scheme 1768134 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-8802 [1] SHAFT-INPUT  
2. 296-9771 C [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 225-6216 [1] GASKET  
5. 165-2804 [1] FLANGE  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 7X-2553 CM [5] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 273-8320 C [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 165-3852 [2] BEARING AS-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 190-4896 [2] PLUG  
18. 207-2985 [2] ORIFICE  
19. 282-9192 C [1] CASE-FLANGE  
20. 165-2793 [2] RETAINER  
21. 165-2794 [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 7X-2556 CM [1] BOLT (M16X2X100-MM)  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 C [2] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 222-2063 [1] SHAFT-DRIVE  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 CM [2] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 9S-4191 [3] PLUG (9/16-18-THD)  
44. 3J-1907 [3] SEAL-O-RING  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)(FLOW CONTROL)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
49. 189-9763 C [4] SEAL-O-RING  
50. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33250415
 

176-8134: PUMP GP-PISTON

176-8134 PUMP GP-PISTON -MAIN HYDRAULIC
S/N CKE1904-UP
PART OF 162-6312 PUMP & MTG GP-MAIN HYDRAULIC
i02888428 SEBP3325
1768134 PUMP GP-PISTON Parts scheme 1768134 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 267-1629 [1] SHAFT-DRIVEN  
2. 311-7409 [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 225-6216 [1] GASKET  
5. 165-2804 [1] FLANGE  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 7X-2553 M [5] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 273-8320 [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 267-8084 [2] BEARING-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 190-4896 [2] PLUG  
18. 207-2985 [2] ORIFICE  
19. 282-9192 [1] CASE-FLANGE  
20. 165-2793 [2] RETAINER  
21. 298-5732 C [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 7X-2556 M [1] BOLT (M16X2X100-MM)  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 [2] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 267-1628 [1] SHAFT-DRIVE  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 M [2] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 9S-4191 [3] PLUG (9/16-18-THD)  
44. 3J-1907 [3] SEAL-O-RING  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)(FLOW CONTROL)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
49. 189-9763 [4] SEAL-O-RING  
50. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33250416
 

185-0183: SCREEN GP-HYDRAULIC

185-0183 SCREEN GP-HYDRAULIC
S/N CKE1-UP
PART OF 168-9486, 202-3868 TANK & FILTER GP-HYDRAULIC
i01505557 SEBP3325
1850183 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6639 [1] SPRING  
2. 095-6641 [1] GUIDE  
3. 129-7784 [1] ROD  
4. 8T-4133 M [2] NUT (M10X1.5-THD)  
5. 209-6002 [1] SCREEN AS (HYDRAULIC TANK)  
6. 095-1552 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP33250417
 

197-0173: SPOOL GP-CONTROL VALVE

197-0173 SPOOL GP-CONTROL VALVE -WORK TOOL
S/N CKE1-UP
PART OF 171-0006 VALVE GP-CONTROL, 171-0001 VALVE GP-MAIN CONTROL
ALSO AN ATTACHMENT
i01463920 SEBP3325
1970173 SPOOL GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-0148 [1] BOLT-SPECIAL  
2. 7I-7203 [2] SEAT  
3. 197-0151 [1] SPRING  
4. 197-0150 [1] SPRING  
5. 197-0149 [1] STOP  
6. 197-0156 [1] SPOOL  
 

#SEBP33250418
 

197-0175: SPOOL GP-CONTROL VALVE

197-0175 SPOOL GP-CONTROL VALVE -STICK II
S/N CKE1-UP
PART OF 171-0001 VALVE GP-MAIN CONTROL
ALSO AN ATTACHMENT
i01463924 SEBP3325
1970175 SPOOL GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-0148 [1] BOLT-SPECIAL  
2. 7I-7203 [2] SEAT  
3. 197-0153 [1] SPRING  
4. 197-0150 [1] SPRING  
5. 197-0149 [1] STOP  
6. 197-0158 [1] SPOOL  
 

#SEBP33250419
 

197-0211: SPOOL GP-CONTROL VALVE

197-0211 SPOOL GP-CONTROL VALVE -STICK I
S/N CKE1-UP
PART OF 171-0001 VALVE GP-MAIN CONTROL
ALSO AN ATTACHMENT
i01463949 SEBP3325
1970211 SPOOL GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-0148 [1] BOLT-SPECIAL  
2. 7I-7203 [2] SEAT  
3. 197-0151 [1] SPRING  
4. 197-0150 [1] SPRING  
5. 197-0149 [1] STOP  
6. 197-0212 [1] SPOOL  
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 311C :

PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
195-0019 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
162-6312 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-AUXILIARY
244-5214 PUMP & MTG GP-AUXILIARY
MOUNTING GP-VALVE
179-7455 MOUNTING GP-VALVE
MOTOR GP-TRAVEL
199-6413 MOTOR GP-TRAVEL
MOTOR GP-SWING
170-9896 MOTOR GP-SWING
MANIFOLD GP-CONTROL
250-1916 MANIFOLD GP-CONTROL
PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC
PUMP GP-PISTON
176-8134 PUMP GP-PISTON
PUMP GP-PISTON
176-8134 PUMP GP-PISTON
PUMP GP-PISTON
176-8134 PUMP GP-PISTON
PUMP GP-PISTON
176-8134 PUMP GP-PISTON
SCREEN GP-HYDRAULIC
185-0183 SCREEN GP-HYDRAULIC
SPOOL GP-CONTROL VALVE
197-0173 SPOOL GP-CONTROL VALVE
SPOOL GP-CONTROL VALVE
197-0175 SPOOL GP-CONTROL VALVE

Truck sale:

 
 
CATERPILLAR 311C 2005
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR 311C 2007
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
2008 CAT 311C

EURO AUCTIONS
United Kingdom
CATERPILLAR 311 C 2006
 
CATERPILLAR 311 C 2006
- TRACK EXCAVATORS
PON EQUIPMENT DENMARK
Denmark
 
 
2007 CAT 311C

EURO AUCTIONS
United Kingdom
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.