249-8901 WIRING GP-RADIO S/N ASE1-UP PART OF 254-1561 WIRING GP-RADIO 14H MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 249-8901 WIRING GP-
1. 254-1561 WIRING GP-
2. 161-1928 WIRING GP-
3. 187-8137 WIRING GP-
4. 200-4983 WIRING GP-
5. 200-4983 WIRING GP-
6. 225-7934 WIRING GP-
7. 225-7934 WIRING GP-

LIGHTING GP

8. 194-7982 WIRING GP-
9. 318-1141 WIRING GP-
0. INFORMATION

MOTOR GRADER 14H MOTOR GRADER ASE
14H Motor Grader ASE00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3328 14H ASE (2000)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

250-1930 WIRING GP-MONITOR

251-9569 WIRING GP-MONITOR

249-8901 WIRING GP-RADIO

254-1561 WIRING GP-RADIO

161-1928 WIRING GP-REAR

187-8137 WIRING GP-REAR

#SEBP33280360

249-8901: WIRING GP-RADIO

WIRING GP-RADIO

249-8901 WIRING GP-RADIO
S/N ASE1-UP
PART OF 254-1561 WIRING GP-RADIO

i02291649 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	243-3247	[1]	HARNESS AS-RADIO
	190-7614		KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	2V-8259	[1]	GROMMET
2.	033-8248	[8]	CLIP (LOOP)
3.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4133 M	[6]	NUT (M10X1.5-THD)
5.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP33280361

254-1561: WIRING GP-RADIO

WIRING GP-RADIO

254-1561 WIRING GP-RADIO
S/N ASE1-UP
PART OF 292-7974 DISPLAY AR-MONITOR, 249-7802, 250-3028 GRADE CONTROL AR-SATELLITE

i02291644 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	249-8901 Y	[1]	WIRING GP-RADIO
	Y		SEPARATE ILLUSTRATION

#SEBP33280362

161-1928: WIRING GP-REAR

WIRING GP-REAR

161-1928 WIRING GP-REAR
S/N ASE1-UP
PART OF 162-5606 GENERAL AR

i01636375 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-3636	[1]	SWITCH AS-BALL (GEAR RANGE)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	3S-2093 B	[5]	STRAP-CABLE
3.	5J-4857 B	[15]	SHIM (0.01-MM THK)
4.	6S-1061	[1]	CABLE AS-BATTERY
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
5.	7G-1060	[1]	STRAP AS-GROUND
6.	8W-3642	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(90-CM)
	9G-8909	[1]	COVER-TERMINAL (BLACK)
7.	8W-8527	[1]	SLEEVE
8.	8W-8528	[4]	SLEEVE
9.	9L-1566	[1]	SUPPORT
10.	9L-3059	[1]	SUPPORT-TUBE
11.	9M-4594	[2]	SPACER (0.406X0.875X0.75-IN THK)
12.	9U-2277	[2]	CLIP AS
13.	106-8704	[1]	SUPPRESSOR AS-ARC
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	123-3688	[1]	PLATE AS
	7L-0811	[1]	DOWEL
15.	123-3689	[1]	PLATE AS
16.	123-3692	[1]	ARM
17.	125-6807	[1]	PLATE
18.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUTDOWN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
20.	187-1008	[1]	SENDER AS-POSITION (ARTICULATION)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	9X-1813 B		SLEEVE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
21.	187-3178	[1]	SWITCH AS-BALL (NEUTRAL START)
21A.	187-3178	[1]	SWITCH AS-BALL (BACK-UP ALARM)
			(EACH SWITCH AS INCLUDES)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
22.	187-8546	[1]	HARNESS AS-REAR (TAIL)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
23.	187-9647	[1]	HARNESS AS-REAR (RELAY)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
24.	188-3586	[1]	HARNESS AS-REAR (TRANSMISSION)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
25.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
26.	115-3073	[1]	CLIP AS-CONNECTING
	8C-3334	[1]	RIVET-TUBULAR
27.	130-5300	[8]	CLIP
28.	130-5301	[2]	CLIP
29.	1S-0996	[2]	CLIP
30.	3E-5169	[1]	GUARD-SWITCH
31.	4D-7794	[8]	CLIP
32.	4D-9517	[1]	CLIP
33.	4S-1936	[1]	CLIP
34.	5K-3294	[1]	CLIP
35.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
36.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
37.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
38.	6D-4244	[6]	CLIP (LOOP)
39.	6D-4246	[6]	CLIP (LOOP)
40.	6V-6893	[3]	BOLT (6-32X0.375-IN)
41.	6V-8801	[1]	NUT (3/8-16-THD)
42.	7C-4354	[3]	CLIP
43.	7X-2537 M	[1]	BOLT (M8X1.25X35-MM)
45.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
46.	8T-4133 M	[3]	NUT (M10X1.5-THD)
47.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
48.	8T-4137 M	[16]	BOLT (M10X1.5X20-MM)
49.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
50.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
51.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
52.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
53.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
54.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
56.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
57.	8T-9364	[2]	BOLT (1/4-20X0.625-IN)
58.	8W-8909	[5]	SLEEVE
59.	9G-9154	[1]	CLIP
60.	174-5907	[3]	CLIP (LOOP)
61.	2V-3216	[1]	CLIP (LOOP)
62.	7K-1181	[1]	STRAP-CABLE
63.	139-6122	[1]	BOSS
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP33280363

187-8137: WIRING GP-REAR

WIRING GP-REAR

187-8137 WIRING GP-REAR -SERVICE CENTER
S/N ASE1-UP
PART OF 183-8482 SERVICE CENTER AR

i01644684 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-0273	[1]	FITTING (RUBBER)
2.	3E-5239	[1]	RELAY AS (24-VOLT)(MAIN)
3.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)(DISCONNECT SWITCH)
4.	3S-2093	[2]	STRAP-CABLE
5.	6V-4283	[1]	PLATE-IDENTIFICATION (ALTERNATOR RESET)
6.	7K-4743	[2]	SPACER (10.31X25.4X6.35-MM THK)
7.	7V-9275	[1]	STRAP
8.	9L-1566	[1]	SUPPORT
9.	112-4428	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(27-CM)
10.	115-5593	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(119-CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
11.	118-3534	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING)
12.	125-6390	[1]	PLATE-INFORMATION (ENGINE)
13.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
14.	169-5414	[1]	CLIP
15.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
15A.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)
			(EACH INCLUDES)
	253-2111	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	177-8802	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(32-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
17.	177-9813	[1]	CABLE AS
	5P-5675 D		WIRE (6-GA, BLACK)(0.5-M, BLACK)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	114-8843 E		SLEEVE-PLASTIC (20-CM)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)(6-GA)
18.	177-9814	[1]	CABLE AS
	6V-2369 D		CABLE (4-GA, BLACK)(0.4-M)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	114-8843 E		SLEEVE-PLASTIC (70-CM)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
19.	178-0160	[1]	WIRE AS
20.	178-0162	[1]	CABLE AS
	5P-5689 D		WIRE (8-GA, BLACK)(0.2-M, BLACK)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
21.	178-0555	[1]	CABLE AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	6V-2369 D		CABLE (4-GA, BLACK)(0.2-M)
22.	180-6153	[1]	PLATE
23.	187-8359	[1]	HARNESS AS-REAR (SERVICE CENTER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
24.	187-8370	[1]	HARNESS AS-REAR (SERVICE CENTER)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
25.	189-0108	[1]	PLATE
26.	194-1854	[1]	COVER
27.	194-1855	[1]	PLATE AS
28.	195-4990	[1]	WIRE AS
29.	200-8817	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(119-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
30.	033-8248	[1]	CLIP (LOOP)
31.	130-5300	[2]	CLIP
32.	132-6938	[1]	PLATE
33.	157-2528	[1]	SPACER (7X16X20-MM THK)
34.	174-5907	[6]	CLIP (LOOP)
35.	1S-0994	[2]	CLIP (LOOP)
36.	1S-1015	[1]	CLIP (LOOP)
37.	1V-6688	[1]	GROMMET
39.	3K-8106	[2]	SCREW-MACHINE (8-32X1-IN)
40.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
41.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
42.	4D-7794	[3]	CLIP
43.	4D-8948	[1]	CLIP
44.	4H-2558	[2]	GROMMET
45.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
46.	5L-4507	[4]	SCREW-MACHINE (10-32X0.875-IN)
47.	6D-3479	[1]	CLIP (LOOP)
48.	6K-8178	[2]	CLIP (LOOP)
49.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
50.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
51.	7N-3718	[1]	CLIP
52.	7X-2533 M	[1]	BOLT (M6X1X35-MM)
53.	7Y-8169	[1]	GROMMET
54.	8M-2770	[2]	CLIP (LOOP)
55.	8M-2772	[1]	CLIP (LOOP)
56.	8T-0293 M	[1]	BOLT (M12X1.75X20-MM)
57.	8T-4121	[24]	WASHER-HARD (11X21X2.5-MM THK)
58.	8T-4133 M	[1]	NUT (M10X1.5-THD)
59.	8T-4136 M	[13]	BOLT (M10X1.5X25-MM)
60.	8T-4137 M	[10]	BOLT (M10X1.5X20-MM)
61.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
62.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
63.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
64.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
65.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
66.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
67.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33280364

200-4983: WIRING GP-REAR

WIRING GP-REAR

200-4983 WIRING GP-REAR -EU
S/N ASE1-879
PART OF 201-1053 COOLING AR

i01646123 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	5C-9930	[1]	LAMP GP (STOP/TAIL/TURN)
	6C-0109	[1]	LAMP AS (STOP/TAIL/TURN)
	5C-9584	[2]	LAMP (24-VOLT, 21-WATT)(STOP/TAIL)
	4V-8116	[1]	LAMP (24-VOLT, 5-WATT)(TURN)
3.	5C-9931	[1]	LAMP GP (STOP/TAIL/TURN)
	6C-0110	[1]	LAMP AS (STOP/TAIL/TURN)
	5C-9584	[2]	LAMP (24-VOLT, 21-WATT)(STOP/TAIL)
	4V-8116	[1]	LAMP (24-VOLT, 5-WATT)(TURN)
4.	6C-5233	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
5.	6C-5234	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
6.	7X-2393	[4]	BUMPER-CONICAL
7.	9S-1316	[2]	SPRING
8.	112-5555	[2]	ROD
9.	156-0283	[2]	WASHER-HARD (8.4X35X2.5-MM THK)
10.	160-1744	[2]	BRACKET
11.	162-2933	[1]	ARM AS
12.	162-2934	[1]	ARM AS
13.	203-8471	[1]	HARNESS AS-REAR CHASSIS
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
14.	208-7933	[2]	PLATE
15.	208-7934	[1]	HARNESS AS-REAR LIGHTING
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
16.	208-7936	[1]	HARNESS AS-REAR LIGHTING
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
17.	123-6449 Y	[1]	ALARM GP
18.	130-5300	[5]	CLIP
19.	2V-3216	[2]	CLIP (LOOP)
20.	3B-5301	[2]	PIN-COTTER
21.	3D-5279	[2]	GROMMET
22.	5C-2890 M	[6]	NUT (M6X1-THD)
23.	5C-7261 M	[4]	NUT (M8X1.25-THD)
24.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
25.	7N-3718	[1]	CLIP
26.	8D-5641	[4]	BEARING
27.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
28.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
29.	8T-4133 M	[2]	NUT (M10X1.5-THD)
30.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
31.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
32.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
33.	8T-4173 M	[2]	BOLT (M16X2X110-MM)
34.	8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
35.	8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
36.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
38.	8T-4778 M	[2]	LOCKNUT (M16X2-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33280365

200-4983: WIRING GP-REAR

WIRING GP-REAR

200-4983 WIRING GP-REAR -EU
S/N ASE1-UP
PART OF 211-1769, 211-1770, 289-3511, 289-3512 CONVERSION AR-CERTIFICATION, 201-1053 COOLING AR

i01991868 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[11]	STRAP-CABLE
	5C-9930	[1]	LAMP GP (STOP, TURN, TAIL, RH)
	6C-0109	[1]	LAMP AS (STOP, TURN, TAIL, RH)
	5M-6725	[1]	SCREW-TAPPING (8-18X0.625-IN)
	8L-5828	[1]	SCREW-TAPPING (8-18X0.875-IN)
	188-9694	[1]	LENS (RED, YELLOW)
	188-9695	[1]	SEAL
	5C-9584	[2]	LAMP (24-VOLT, 21-WATT)(STOP,TAIL)
	4V-8116	[1]	LAMP (24-VOLT, 5-WATT)(TURN)
3.	5C-9931	[1]	LAMP GP (STOP,TAIL,TURN, LH)
	6C-0110	[1]	LAMP AS (STOP, TAIL, TURN, LH)
	5M-6725	[1]	SCREW-TAPPING (8-18X0.625-IN)
	8L-5828	[1]	SCREW-TAPPING (8-18X0.875-IN)
	188-9694	[1]	LENS (RED, YELLOW)
	188-9695	[1]	SEAL
	5C-9584	[2]	LAMP (24-VOLT, 21-WATT)(STOP,TAIL)
	4V-8116	[1]	LAMP (24-VOLT, 5-WATT)(TURN)
4.	6C-5233	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
5.	6C-5234	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
6.	7X-2393	[4]	BUMPER-CONICAL
7.	9S-1316	[2]	SPRING
8.	112-5555	[2]	ROD
9.	156-0283	[2]	WASHER-HARD (8.4X35X2.5-MM THK)
10.	160-1744 C	[2]	BRACKET
11.	162-2933	[1]	ARM AS (RH)
12.	162-2934	[1]	ARM AS (LH)
13.	208-7933 C	[2]	PLATE
14.	213-9100 C	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M)
	9X-1813 E		SLEEVE (31-CM)
15.	231-4528 C	[1]	HARNESS AS-REAR CHASSIS (RADIATOR)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
16.	231-4530 C	[1]	HARNESS AS-REAR LIGHTING (RH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
17.	231-4531 C	[1]	HARNESS AS-REAR LIGHTING (LH)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
18.	306-3046	[1]	HARNESS AS-REAR (BRAKE PRESSURE)
19.	130-5300 C	[5]	CLIP
20.	139-6857	[1]	PLATE
21.	2V-3216	[2]	CLIP (LOOP)
22.	3B-5301	[2]	PIN-COTTER
23.	3E-5239	[1]	RELAY AS (24-VOLT)
24.	4D-7794	[3]	CLIP
25.	4D-9517	[1]	CLIP
26.	4M-5281	[1]	BOLT (1/4-20X0.75-IN)
27.	5C-2890 M	[6]	NUT (M6X1-THD)
28.	5C-7261 M	[4]	NUT (M8X1.25-THD)
29.	5P-1076 C	[4]	WASHER-HARD (13.5X30X4-MM THK)
30.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
31.	6V-8185	[1]	NUT (1/4-20-THD)
32.	7G-7053 C	[2]	GROMMET
33.	7K-1181	[1]	STRAP-CABLE (PLASTIC)
34.	8D-5641	[4]	BEARING
35.	8T-4121 C	[8]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
37.	8T-4133 CM	[2]	NUT (M10X1.5-THD)
38.	8T-4136 CM	[6]	BOLT (M10X1.5X25-MM)
39.	8T-4139 CM	[4]	BOLT (M12X1.75X30-MM)
40.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
41.	8T-4173 M	[2]	BOLT (M16X2X110-MM)
42.	8T-4189 CM	[4]	BOLT (M8X1.25X20-MM)
43.	8T-4205 C	[12]	WASHER-HARD (7.2X14.5X2-MM THK)
44.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
46.	8T-4778 M	[2]	LOCKNUT (M16X2-THD)
47.	9X-2026	[2]	WASHER (6.5X17X1-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP33280366

225-7934: WIRING GP-REAR

WIRING GP-REAR

225-7934 WIRING GP-REAR
S/N ASE1-806
PART OF 162-5606 GENERAL AR

i01894931 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	203-8471	[1]	HARNESS AS-REAR CHASSIS
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
3.	123-6449	[1]	ALARM GP
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	5P-5677 D		WIRE (18-GA, BLACK)(.6M)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (28CM)
4.	130-5300	[5]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	5C-2890 M	[8]	NUT (M6X1-THD)
7.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
8.	7N-3718	[1]	CLIP
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
11.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33280367

225-7934: WIRING GP-REAR

WIRING GP-REAR

225-7934 WIRING GP-REAR
S/N ASE807-UP
PART OF 162-5606 GENERAL AR

i01960020 SEBP3328

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[12]	STRAP-CABLE
2.	213-9100 C	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M EACH)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
3.	231-4528 C	[1]	HARNESS AS-REAR CHASSIS (RADIATOR)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	155-2269	[3]	PLUG AS-CONNECTOR (2-PIN)
4.	130-5300	[5]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	5C-2890 M	[8]	NUT (M6X1-THD)
7.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
8.	5P-4116 C	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
9.	8T-4189 CM	[4]	BOLT (M8X1.25X20-MM)
10.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
11.	4D-9517	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33280368

194-7982: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

194-7982 WIRING GP-REAR LIGHTING -RADIATOR
S/N ASE1-UP
PART OF 184-0793 COOLING AR

i01638387 SEBP3328

1947982 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	116-5710	[2]	GROMMET
3.	222-0355	[1]	HARNESS AS
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)(BACK-UP ALARM/RETURN)
4.	123-6449 Y	[1]	ALARM GP
5.	130-5300	[5]	CLIP
6.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
7.	5C-2890 M	[8]	NUT (M6X1-THD)
8.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
9.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
11.	8T-4198 M	[2]	BOLT (M10X1.5X100-MM)
12.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33280369

318-1141: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

318-1141 WIRING GP-REAR LIGHTING
S/N ASE1-UP

i02918722 SEBP3328

3181141 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 14H MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(BRAKE LIGHT)
2.	7K-1181	[8]	STRAP-CABLE
3.	9G-7101	[1]	SPACER (11X20X30-MM THK)
4.	291-1049	[1]	PLATE
5.	306-3046	[1]	HARNESS AS-REAR
6.	4P-8134	[1]	CLIP (LADDER)
7.	5C-2890 M	[1]	NUT (M6X1-THD)
8.	8T-2501	[1]	BOLT (3/8-16X2-IN)
9.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4138 M	[1]	BOLT (M6X1X20-MM)
11.	9X-6165	[2]	WASHER (6.5X22X2.5-MM THK)
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines

CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines

CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21