FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYDFILTER GP-FUEL
PUMP GP-FUEL INJECTION
LINES GP-FUEL
FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
#SEBP33520160
210-5574: LINES GP-INJECTOR HYD PUMP
210-5574 LINES GP-INJECTOR HYD PUMP
S/N BMA1-UP
PART OF 172-4043 ENGINE AR-CORE
S/N BMA1-UP
PART OF 172-4043 ENGINE AR-CORE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 179-7001 Y | [1] | ADAPTER GP-OIL LINE | |
| 2. | 200-4528 | [1] | HOSE AS | |
| 3. | 227-5928 | [1] | TUBE AS | |
| 4. | 030-8196 | [1] | CONNECTOR | |
| 5. | 2M-9780 | [1] | SEAL-O-RING | |
| 6. | 3J-1907 | [1] | SEAL-O-RING | |
| 7. | 4F-9653 | [1] | SEAL-O-RING | |
| 8. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 9. | 6V-5842 M | [2] | BOLT (M10X1.5X40-MM) | |
| 10. | 9X-0261 | [1] | ADAPTER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520161
210-5574: LINES GP-INJECTOR HYD PUMP
210-5574 LINES GP-INJECTOR HYD PUMP
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-3399 | [1] | CONNECTOR AS | |
| 6V-8636 | [1] | CONNECTOR | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 221-3494 | [1] | SEAL-O-RING | ||
| 2. | 227-5928 | [1] | TUBE AS | |
| 3. | 247-3755 | [1] | TUBE AS | |
| 4. | 426-4106 | [1] | ADAPTER AS | |
| 030-8196 | CONNECTOR | |||
| 238-5081 | [1] | SEAL-O-RING | ||
| 5. | 329-5451 | [1] | ADAPTER AS | |
| 9X-0261 | [1] | ADAPTER | ||
| 214-7566 | SEAL-O-RING | |||
| 214-7568 | [1] | SEAL-O-RING | ||
| 6. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 7. | 4F-9653 | [1] | SEAL-O-RING | |
| 8. | 6V-5842 M | [2] | BOLT (M10X1.5X40-MM) | |
| M | METRIC PART | |||
#SEBP33520162
185-2069: PUMP GP-FUEL PRM & PRIM FILTER
185-2069 PUMP GP-FUEL PRM & PRIM FILTER
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4038, 216-0848, 276-7025 ENGINE AR-COMPLETE
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4038, 216-0848, 276-7025 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 9V-9295 I | [1] | HOSE AS | |
| 3. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 4. | 392-0776 | [1] | VALVE AS-DRAIN (FUEL FILTER) | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 179-9348 | [1] | VALVE-DRAIN | ||
| 5. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 6. | 206-6876 | [1] | CAP-TUBE | |
| 7. | 209-8441 Y | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 8. | 212-3657 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (ELECTRIC) | |
| 9. | 232-1374 | [1] | BRACKET | |
| 10. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 11. | 370-6297 | [1] | CONNECTOR AS | |
| 6V-8715 | [1] | CONNECTOR | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 12. | 398-5601 | [1] | PLUG AS | |
| 238-5081 | [1] | SEAL-O-RING | ||
| 360-3681 | [1] | PLUG (7/8-14-THD) | ||
| 13. | 315-9835 | [1] | ELBOW AS | |
| 6V-0484 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 14. | 4P-7581 | [1] | CLIP (LADDER) | |
| 15. | 329-5459 | [1] | ADAPTER AS | |
| 5P-1404 | [1] | ADAPTER | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 16. | 353-5105 | [1] | ADAPTER AS | |
| 030-8194 | [1] | CONNECTOR | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 17. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| 18. | 321-8671 | [1] | CONNECTOR AS | |
| 030-8188 | [1] | CONNECTOR | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 19. | 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 20. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| 23. | 8T-7352 M | [2] | BOLT (M8X1.25X160-MM) | |
| 24. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520163
212-3657: PUMP GP-FUEL PRM & WATER SEP
212-3657 PUMP GP-FUEL PRM & WATER SEP
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 185-2069 PUMP GP-FUEL PRM & PRIM FILTER
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 185-2069 PUMP GP-FUEL PRM & PRIM FILTER
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS#SEBP33520164
178-0198: PUMP GP-UNIT INJECTION
178-0198 PUMP GP-UNIT INJECTION
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS#SEBP33520165
180-7341: PUMP GP-UNIT INJECTOR HYD
180-7341 PUMP GP-UNIT INJECTOR HYD
S/N BMA1-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD
S/N BMA1-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 122-5053 Y | [1] | VALVE GP-SOLENOID (INJECTION ACTUATION) | |
| 2. | 128-3473 | [1] | GEAR-PUMP DRIVE (36-TEETH) | |
| 3. | 162-9610 | [1] | PUMP GP-FUEL INJECTION | |
| 4. | 162-9612 | [1] | PUMP GP-FUEL TRANSFER | |
| 5. | 179-7004 | [1] | ADAPTER AS | |
| 153-4906 | [1] | SEAL-O-RING | ||
| 6. | 4P-5918 | [1] | CLIP | |
| 7. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 9. | 118-0275 | [1] | WASHER (13.5X32X8-MM THK) | |
| 10. | 131-1845 | [1] | PLUG-HEX SOCKET | |
| 12. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 144-7339 F | [1] | SEAL-O-RING (FUEL TRANSFER PUMP) | ||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520166
180-7341: PUMP GP-UNIT INJECTOR HYD
180-7341 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 122-5053 Y | [1] | VALVE GP-SOLENOID (INJECTION ACTUATION) | |
| 2. | 128-3473 | [1] | GEAR-PUMP DRIVE (36-TEETH) | |
| 3. | 162-9610 | [1] | PUMP GP-FUEL INJECTION | |
| 4. | 162-9612 | [1] | PUMP GP-FUEL TRANSFER | |
| 5. | 250-1424 C | [1] | ELBOW AS | |
| 6V-8724 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 221-3494 | [1] | SEAL-O-RING | ||
| 6. | 4P-5918 | [1] | CLIP | |
| 7. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 9. | 118-0275 | [1] | WASHER (13.5X32X8-MM THK) | |
| 10. | 131-1845 | [1] | PLUG-HEX SOCKET | |
| 12. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 144-7339 F | [1] | SEAL-O-RING (FUEL TRANSFER PUMP) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520167
210-5575: PUMP GP-UNIT INJECTOR HYD
210-5575 PUMP GP-UNIT INJECTOR HYD
S/N BMA1-UP; 5GG9359-UP
PART OF 172-4043 ENGINE AR-CORE
S/N BMA1-UP; 5GG9359-UP
PART OF 172-4043 ENGINE AR-CORE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-7341 Y | [1] | PUMP GP-UNIT INJECTOR HYD | |
| 2. | 185-3241 | [1] | SEAL-O-RING | |
| 3. | 3J-1907 | [1] | SEAL-O-RING | |
| 4. | 6V-5219 M | [1] | BOLT (M8X1.25X40-MM) | |
| 5. | 6V-9804 M | [2] | BOLT (M8X1.25X75-MM) | |
| 6. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520168
210-5575: PUMP GP-UNIT INJECTOR HYD
210-5575 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE
S/N TX61-UP; BMA1-UP; 5GG9359-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-7341 Y | [1] | PUMP GP-UNIT INJECTOR HYD | |
| 2. | 185-3241 | [1] | SEAL-O-RING | |
| 3. | 389-3708 C | [1] | PLUG AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 360-3679 | [1] | PLUG-CONNECTOR (9/16-18-THD) | ||
| 4. | 6V-5219 M | [1] | BOLT (M8X1.25X40-MM) | |
| 5. | 6V-9804 M | [2] | BOLT (M8X1.25X75-MM) | |
| 6. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP33520169
232-0343: REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
S/N TX61-UP; BMA6397-UP; 5GG9359-UP
PART OF 237-2263 LINES GP-FUEL FILTER
S/N TX61-UP; BMA6397-UP; 5GG9359-UP
PART OF 237-2263 LINES GP-FUEL FILTER
For full view, you need register
Parts for your 950G II WHEEL LOADER:
CATERPILLAR SISInformation:
FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
Special Instruction
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Specifications
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Troubleshooting
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Injection Actuation Pressure - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Disassembly and Assembly
Injection Actuation Pressure Control Valve - Remove and Install
3126B Engines for Caterpillar Built Machines
3126B Engines for Caterpillar Built Machines
