AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

213-4822 LINES GP-COUPLER S/N AYB1-UP PART OF 206-4056 CONTROL AR-QUICK COUPLER 950G II WHEEL LOADER


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-FRONT
LINES GP-HYDRAULIC

WHEEL LOADER 950G II WHEEL LOADER AYB
 950G II Wheel Loader AYB00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3352 950G II AYB   (1999)

HYDRAULIC SYSTEM

CYLINDER GP
LINES GP-COUPLER
195-3265 LINES GP-COUPLER
LINES GP-COUPLER
195-3265 LINES GP-COUPLER
LINES GP-COUPLER
213-4822 LINES GP-COUPLER
LINES GP-COUPLER
215-1275 LINES GP-COUPLER
LINES GP-COUPLER
231-8534 LINES GP-COUPLER
LINES GP-COUPLER
233-3324 LINES GP-COUPLER
 

#SEBP33520620
 

213-4822: LINES GP-COUPLER

213-4822 LINES GP-COUPLER
S/N AYB1-UP
PART OF 206-4056 CONTROL AR-QUICK COUPLER
i01834643 SEBP3352
2134822 LINES GP-COUPLER Parts scheme 2134822 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-1225 [1] WASHER (11X22X6-MM THK)  
2. 7K-1181 [2] STRAP-CABLE  
3. 9V-9116 [2] SPACER (11.11X19.05X165-MM THK)  
4. 185-2270 Y [1] VALVE GP-DIVERTER (QUICK COUPLER)  
5. 189-3158 [2] SUPPRESSOR-ARC  
6. 231-7075 I [2] HOSE AS  
7. 213-4823 [2] TUBE AS  
8. 213-4824 [1] GUARD  
9. 214-3322 [1] TUBE AS  
10. 214-3323 [1] TUBE AS  
11. 214-3324 I [2] HOSE AS  
12. 214-3325 I [1] HOSE AS  
13. 214-3328 I [1] HOSE AS  
14. 225-6706 [1] HARNESS AS-QUICK COUPLER  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
15. 089-7338 [2] SLEEVE (11X20X9-MM THK)  
16. 130-5300 [3] CLIP  
17. 141-6348 M [2] BOLT (M10X1.5X65-MM)  
18. 2B-2404 [14] CLIP  
19. 3J-1907 [4] SEAL-O-RING  
20. 4D-7794 [1] CLIP  
21. 4J-5477 [12] SEAL-O-RING  
22. 4P-7581 [2] CLIP (LADDER)  
23. 5K-2298 [1] CLIP  
24. 5K-8451 [1] CLIP (LOOP)  
25. 6V-8627 [1] ELBOW  
26. 6V-8641 [3] CONNECTOR  
27. 6V-9828 [2] CAP (ORFS)  
28. 8T-3851 M [4] BOSS-WELD (M10X1.5X17.5-MM)  
29. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4137 M [11] BOLT (M10X1.5X20-MM)  
31. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
32. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
33. 9M-8406 [7] CLIP (LOOP)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520621
 

215-1275: LINES GP-COUPLER

215-1275 LINES GP-COUPLER
S/N AYB1-553
PART OF 215-1272 HYDRAULIC AR-COUPLER
i01625534 SEBP3352
2151275 LINES GP-COUPLER Parts scheme 2151275 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9829 [2] CAP (ORFS)  
2. 6V-0852 [1] CAP-DUST  
3. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
5. 7K-1181 [5] STRAP-CABLE  
6. 112-1817 [3] VALVE-BALL  
7. 177-9851 [1] BRACKET  
8. 180-8585 Y [1] VALVE GP-DIVERTER (QUICK COUPLER)  
9. 187-6067 I [1] HOSE AS  
10. 187-6081 I [1] HOSE AS  
11. 187-6083 I [1] HOSE AS  
12. 187-6086 I [1] HOSE AS  
13. 187-6087 I [1] HOSE AS  
14. 192-4446 I [2] HOSE AS  
15. 214-8911 [1] BRACKET AS  
  7X-0752 M [1] BOSS-WELD (M10X1.5X65-MM)  
  8T-4967 M [2] STUD-WELD (M10X1.5X23-MM)  
  8T-6462 M [1] BOSS-WELD (M10X1.5X25-MM)  
  9R-2060 M [1] BOSS (M10X1.5X21-MM)  
16. 086-9286 [20] CLAMP  
17. 096-6166 [8] WASHER-HARD (4.5X9X1-MM THK)  
18. 130-5300 [1] CLIP  
19. 148-8336 [2] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
20. 150-4027 [1] TEE AS  
  3E-2310 [1] TEE  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
22. 1A-9579 [10] BOLT (5/16-18X1.5-IN)  
23. 206-8982 [1] HARNESS AS-WORK TOOL (QUICK COUPLER)  
  8T-8737 [4] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
24. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
25. 3J-1907 [8] SEAL-O-RING  
26. 3V-0046 [10] PLATE  
27. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
28. 4J-5477 [11] SEAL-O-RING  
29. 5K-8451 [1] CLIP (LOOP)  
30. 6C-6251 [2] PLATE  
31. 6V-8627 [1] ELBOW  
32. 6V-8641 [4] CONNECTOR  
33. 6V-8993 [2] UNION  
34. 7Y-3173 M [4] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
35. 8T-0164 [2] ELBOW  
36. 8T-0285 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
37. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [2] NUT (M10X1.5-THD)  
39. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
41. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
42. 8T-5005 M [2] BOLT (M10X1.5X70-MM)  
43. 9M-8406 [4] CLIP (LOOP)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520622
 

231-8534: LINES GP-COUPLER

231-8534 LINES GP-COUPLER
S/N AYB1-UP
PART OF 215-1272 HYDRAULIC AR-COUPLER, 233-3324 LINES GP-COUPLER
i01914813 SEBP3352
2318534 LINES GP-COUPLER Parts scheme 2318534 LINES GP-COUPLER Parts scheme 2318534 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-1225 [1] WASHER (11X22X6-MM THK)  
2. 7K-1181 [3] STRAP-CABLE  
4. 9V-9116 [3] SPACER (11.11X19.05X165-MM THK)  
5. 189-3158 [1] SUPPRESSOR-ARC  
6. 213-4823 [2] TUBE AS  
7. 213-4824 [1] GUARD  
8. 214-3322 [1] TUBE AS  
9. 214-3323 [1] TUBE AS  
10. 214-3324 I [2] HOSE AS  
11. 214-3325 I [1] HOSE AS  
12. 214-3328 I [1] HOSE AS  
13. 230-5678 Y [1] VALVE GP-QUICK COUPLER  
14. 231-4912 [1] HARNESS AS-WORK TOOL (QUICK COUPLER)  
  155-2261 [2] WEDGE-PLUG LOCK (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
  155-2276 [1] WEDGE-PLUG LOCK (3-PIN)  
15. 231-7075 I [2] HOSE AS  
16. 089-7338 [2] SLEEVE (11X20X9-MM THK)  
17. 130-5300 [1] CLIP  
18. 141-6348 M [2] BOLT (M10X1.5X65-MM)  
19. 230-7443 [1] BRACKET AS  
20. 2B-2404 [14] CLIP  
21. 3J-1907 [4] SEAL-O-RING  
22. 4D-7794 [1] CLIP  
23. 4J-5477 [12] SEAL-O-RING  
24. 4P-7581 [2] CLIP (LADDER)  
25. 5K-2298 [1] CLIP  
26. 5K-8451 [1] CLIP (LOOP)  
27. 6V-8627 [1] ELBOW  
28. 6V-8641 [3] CONNECTOR  
29. 6V-9828 [2] CAP (ORFS)  
30. 8T-3851 M [4] BOSS-WELD (M10X1.5X17.5-MM)  
31. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4137 M [11] BOLT (M10X1.5X20-MM)  
33. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
34. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
35. 9M-8406 [7] CLIP (LOOP)  
36. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
37. 5I-3883 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520623
 

233-3324: LINES GP-COUPLER

233-3324 LINES GP-COUPLER -HIGH LIFT MACHINES
S/N AYB1-UP
PART OF 188-0098 HYDRAULIC AR-HIGH LIFT
i01914797 SEBP3352
2333324 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 189-7965 [1] TUBE AS  
2. 189-7966 [1] TUBE AS  
3. 233-7963 I [2] HOSE AS  
4. 194-6770 [1] GUARD  
5. 231-8534 Y [1] LINES GP-COUPLER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP33520624
 

126-7738: LINES GP-FRONT

126-7738 LINES GP-FRONT
S/N AYB1-UP
PART OF 234-0423 HYDRAULIC AR, 192-4677, 202-8012, 234-0426 HYDRAULIC AR-3 VALVE
Type 1
i00969590 SEBP3352
1267738 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3704 [2] SEAL-RECTANGULAR  
2. 3W-3392 I [2] HOSE AS  
3. 5H-4020 [2] COVER  
4. 6V-0852 [2] CAP-DUST  
5. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
6. 130-8219 [1] PLATE  
7. 149-8731 [1] BRACKET  
8. 149-8732 [1] BRACKET  
9. 130-9934 [1] TUBE AS  
10. 130-9935 [1] TUBE AS  
11. 161-1364 C [1] TUBE AS (LH)  
12. 161-1365 C [1] TUBE AS (RH)  
13. 137-1978 I [1] HOSE AS  
14. 1P-4579 [2] FLANGE-HALF  
15. 3J-1907 [2] SEAL-O-RING  
16. 4J-0522 [7] SEAL-O-RING  
17. 4J-0524 [1] SEAL-O-RING  
18. 6V-0397 [14] FLANGE-HALF  
19. 8T-2561 [6] WASHER-HARD (10.5X28.5X5-MM THK)  
20. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [6] NUT (M10X1.5-THD)  
22. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
23. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
24. 8T-4183 M [32] BOLT (M12X1.75X40-MM)  
25. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
26. 8T-4223 [50] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4910 M [8] BOLT (M12X1.75X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33520625
 

126-7738: LINES GP-FRONT

126-7738 LINES GP-FRONT
S/N AYB1-UP
PART OF 192-4677, 202-8012, 234-0426 HYDRAULIC AR-3 VALVE
Type 2
i02096747 SEBP3352
1267738 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3704 [2] SEAL-RECTANGULAR  
2. 3W-3392 I [2] HOSE AS  
3. 5H-4020 [2] COVER  
4. 6V-0852 [2] CAP-DUST  
5. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
6. 130-8219 [1] PLATE  
7. 149-8731 [1] BRACKET  
8. 149-8732 [1] BRACKET  
9. 130-9934 [1] TUBE AS  
10. 130-9935 [1] TUBE AS  
11. 161-1364 [1] TUBE AS (LH)  
12. 161-1365 [1] TUBE AS (RH)  
13. 249-7592 CI [1] HOSE AS  
14. 1P-4579 [2] FLANGE-HALF  
15. 3J-1907 [2] SEAL-O-RING  
16. 4J-0522 [7] SEAL-O-RING  
17. 4J-0524 [1] SEAL-O-RING  
18. 6V-0397 [14] FLANGE-HALF  
19. 8T-2561 [6] WASHER-HARD (10.5X28.5X5-MM THK)  
20. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [6] NUT (M10X1.5-THD)  
22. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
23. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
24. 8T-4183 M [32] BOLT (M12X1.75X40-MM)  
25. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
26. 8T-4223 [50] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4910 M [8] BOLT (M12X1.75X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33520626
 

248-6319: LINES GP-FRONT

248-6319 LINES GP-FRONT
S/N AYB1-UP
PART OF 192-4677, 202-8012 HYDRAULIC AR-3 VALVE
i02326683 SEBP3352
2486319 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [2] CAP-DUST  
2. 130-8219 [1] PLATE  
3. 197-3295 [14] FLANGE-HALF  
4. 240-8253 [2] TUBE AS  
5. 248-6320 [1] TUBE AS  
6. 248-6321 [1] TUBE AS  
7. 248-6322 I [2] HOSE AS  
8. 249-7592 I [1] HOSE AS  
9. 1P-3704 [2] SEAL-RECTANGULAR  
10. 1P-4579 [2] FLANGE-HALF  
11. 3J-1907 [2] SEAL-O-RING  
12. 4J-0522 [7] SEAL-O-RING  
13. 4J-0524 [1] SEAL-O-RING  
14. 5H-4020 [2] COVER  
15. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
16. 7X-3392 [24] WASHER-HARD (13.5X22.5X3-MM THK)  
17. 8S-0023 [8] CLIP (SLOT)  
18. 8S-0024 [8] CLIP (TAB)  
19. 8T-2561 [6] WASHER-HARD (10.5X28.5X5-MM THK)  
20. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [6] NUT (M10X1.5-THD)  
22. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
23. 8T-4183 M [32] BOLT (M12X1.75X40-MM)  
24. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
25. 8T-4223 [22] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4910 M [8] BOLT (M12X1.75X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33520627
 

112-6990: LINES GP-HYDRAULIC

112-6990 LINES GP-HYDRAULIC
S/N AYB1-737
PART OF 191-8991 HYDRAULIC AR-2 VALVE
i00753823 SEBP3352
1126990 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1717 [4] CLAMP-HOSE  
2. 5P-4868 [2] CLAMP-HOSE  
3. 5T-0093 [2] HOSE  
4. 5P-1293 [1] HOSE  
5. 6V-0852 [1] CAP-DUST  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 7V-6428 [1] KEEPER  
8. 8X-4886 [1] ELBOW  
9. 133-1963 [1] VALVE-BREAKER RELIEF  
10. 125-2041 I [1] HOSE AS  
11. 129-4349 [1] TUBE AS  
12. 133-6615 [1] PLATE  
13. 134-8203 I [1] HOSE AS  
14. 144-3006 [1] TUBE AS  
15. 144-3007 [1] TUBE AS  
16. 144-3008 [1] TUBE AS  
17. 144-3009 [1] TUBE AS  
18. 146-6213 I [1] HOSE AS  
19. 1P-3704 [1] SEAL-RECTANGULAR  
20. 1P-4579 [4] FLANGE-HALF  
21. 3D-2824 [1] SEAL-O-RING  
22. 3E-6735 [1] SEAL-O-RING  
23. 3J-1907 [2] SEAL-O-RING  
24. 4J-0522 [5] SEAL-O-RING  
25. 4J-0524 [2] SEAL-O-RING  
26. 4J-0527 [1] SEAL-O-RING  
27. 5P-7470 [1] CLIP (SLOT)  
28. 5P-7471 [1] CLIP (TAB)  
29. 5P-8182 [1] GROMMET (46-MM ID)  
30. 6V-0397 [8] FLANGE-HALF  
31. 6V-8397 [1] SEAL-O-RING  
32. 7G-3413 [1] CLIP (SLOT)  
33. 7G-3414 [1] CLIP (TAB)  
34. 7G-3415 [1] GROMMET  
35. 7X-3392 [4] WASHER-HARD (13.5X22.5X3-MM THK)  
36. 8C-8992 M [1] BOLT-LOCKING (M12X1.75X30-MM)  
37. 8T-0788 [1] ELBOW  
38. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
39. 8T-4140 M [4] BOLT (M16X2X60-MM)  
40. 8T-4183 M [20] BOLT (M12X1.75X40-MM)  
41. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
42. 8T-4223 [37] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
44. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
45. 8T-6663 [1] ADAPTER-PORT  
46. 8T-6868 M [6] BOLT (M12X1.75X80-MM)  
47. 8T-7338 M [4] BOLT (M16X2X45-MM)  
48. 9M-2092 [1] SEAL-O-RING  
49. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33520628
 

240-6804: LINES GP-HYDRAULIC

240-6804 LINES GP-HYDRAULIC
S/N AYB738-860
PART OF 191-8991 HYDRAULIC AR-2 VALVE
i02003835 SEBP3352
2406804 LINES GP-HYDRAULIC Parts scheme 2406804 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1296 E HOSE (15-CM)  
2. 5P-1293 E HOSE (13-CM)  
3. 6V-0852 [1] CAP-DUST  
4. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
5. 7V-6428 [1] KEEPER  
6. 8T-4984 [2] CLAMP-HOSE  
7. 9X-2201 [4] CLAMP-HOSE  
8. 125-2041 I [1] HOSE AS  
9. 129-4349 [1] TUBE AS  
10. 133-1963 [1] VALVE-BREAKER RELIEF  
11. 240-6851 [1] BRACKET  
12. 240-6848 I [1] HOSE AS  
13. 144-3007 [1] TUBE AS  
14. 144-3008 [1] TUBE AS  
15. 144-3009 [1] TUBE AS  
16. 236-9880 [1] TUBE AS  
17. 240-6847 [1] TUBE AS  
18. 1P-3704 [1] SEAL-RECTANGULAR  
19. 197-3295 [4] FLANGE-HALF  
20. 1P-4579 [4] FLANGE-HALF  
21. 3D-2824 [1] SEAL-O-RING  
22. 3E-6735 [1] SEAL-O-RING  
23. 3J-1907 [1] SEAL-O-RING  
24. 4J-0522 [3] SEAL-O-RING  
25. 4J-0524 [2] SEAL-O-RING  
26. 4J-0527 [1] SEAL-O-RING  
27. 5P-7470 [1] CLIP (SLOT)  
28. 5P-7471 [1] CLIP (TAB)  
29. 5P-8182 [1] GROMMET (46-MM ID)  
30. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
31. 7G-3413 [1] CLIP (SLOT)  
32. 7G-3414 [1] CLIP (TAB)  
33. 7G-3415 [1] GROMMET  
34. 8C-8992 M [1] BOLT-LOCKING (M12X1.75X30-MM)  
35. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
36. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
37. 8T-4140 M [4] BOLT (M16X2X60-MM)  
38. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
39. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
40. 8T-4223 [26] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
42. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
43. 8T-4192 M [3] BOLT (M12X1.75X25-MM)  
44. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
45. 8T-7338 M [4] BOLT (M16X2X45-MM)  
46. 9M-2092 [1] SEAL-O-RING  
47. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
48. 7X-7729 [2] WASHER (11X25X3-MM THK)  
49. 7X-3392 [8] WASHER-HARD (13.5X22.5X3-MM THK)  
50. 7V-8532 [1] SPACER  
51. 5P-6944 [1] ADAPTER  
52. 3K-0360 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP33520629
 

240-6804: LINES GP-HYDRAULIC

240-6804 LINES GP-HYDRAULIC
S/N AYB861-UP
PART OF 191-8991 HYDRAULIC AR-2 VALVE
i02203273 SEBP3352
2406804 LINES GP-HYDRAULIC Parts scheme 2406804 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1296 E [2] HOSE (15-CM EACH)  
2. 5P-1293 E HOSE (13-CM)  
3. 6V-0852 C [2] CAP-DUST  
4. 7V-6428 [1] KEEPER  
5. 8T-4984 [2] CLAMP-HOSE  
6. 9X-2201 [4] CLAMP-HOSE  
7. 125-2041 I [1] HOSE AS  
8. 129-4349 [1] TUBE AS  
9. 133-1963 [1] VALVE-BREAKER RELIEF  
10. 144-3007 [1] TUBE AS  
11. 144-3008 [1] TUBE AS  
12. 144-3009 [1] TUBE AS  
13. 185-6250 C [1] FITTING AS  
14. 197-3295 [4] FLANGE-HALF  
15. 234-3539 C [2] WASHER-WAVE  
16. 236-9880 [1] TUBE AS  
17. 240-6847 [1] TUBE AS  
18. 240-6848 I [1] HOSE AS  
19. 240-6851 [1] BRACKET  
20. 248-6328 C [1] HOSE AS  
21. 250-4600 [1] HOSE AS  
22. 170-4735 C [2] RING-RETAINING  
23. 1P-3704 [2] SEAL-RECTANGULAR  
24. 1P-3708 C [1] SEAL-RECTANGULAR  
25. 1P-4579 [4] FLANGE-HALF  
26. 3D-2824 [1] SEAL-O-RING  
27. 3E-6735 [1] SEAL-O-RING  
28. 3J-1907 [1] SEAL-O-RING  
29. 4J-0522 C [2] SEAL-O-RING  
30. 4J-0524 [2] SEAL-O-RING  
31. 4J-5477 C [3] SEAL-O-RING  
32. 5P-7470 [1] CLIP (SLOT)  
33. 5P-7471 [1] CLIP (TAB)  
34. 5P-8182 [1] GROMMET (46-MM ID)  
35. 6V-8641 C [1] CONNECTOR  
36. 7G-3413 [1] CLIP (SLOT)  
37. 7G-3414 [1] CLIP (TAB)  
38. 7G-3415 [1] GROMMET  
39. 7X-3392 [8] WASHER-HARD (13.5X22.5X3-MM THK)  
40. 7X-7729 [2] WASHER (11X25X3-MM THK)  
41. 8C-8992 M [1] BOLT-LOCKING (M12X1.75X30-MM)  
42. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
43. 8T-4140 M [4] BOLT (M16X2X60-MM)  
44. 8T-4183 CM [12] BOLT (M12X1.75X40-MM)  
45. 8T-4192 M [3] BOLT (M12X1.75X25-MM)  
46. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
47. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
48. 8T-4223 [26] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
50. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
51. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
52. 8T-7338 M [4] BOLT (M16X2X45-MM)  
53. 9M-2092 [1] SEAL-O-RING  
54. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 950G II :

LINES GP-COUPLER
195-3265 LINES GP-COUPLER
LINES GP-COUPLER
195-3265 LINES GP-COUPLER
LINES GP-COUPLER
188-0099 LINES GP-COUPLER
LINES GP-COUPLER
185-6166 LINES GP-COUPLER
LINES GP-CONNECTING
235-2710 LINES GP-CONNECTING
LINES GP-CONNECTING
201-8254 LINES GP-CONNECTING
188-0098 HYDRAULIC AR-HIGH LIFT
215-1272 HYDRAULIC AR-COUPLER
LINES GP-COUPLER
215-1275 LINES GP-COUPLER
LINES GP-COUPLER
231-8534 LINES GP-COUPLER
LINES GP-COUPLER
233-3324 LINES GP-COUPLER
LINES GP-FRONT
126-7738 LINES GP-FRONT
LINES GP-FRONT
126-7738 LINES GP-FRONT
LINES GP-FRONT
248-6319 LINES GP-FRONT
LINES GP-HYDRAULIC
112-6990 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
240-6804 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.