AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

186-3410 PUMP GP-UNIT INJECTOR HYD S/N BMA1-UP PART OF 183-2859 PUMP & MTG GP-UNIT INJ HYD CANNOT BE USED WITH ATTACHED FUEL TRANSFER PUMP 580B


FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
TANK GP-FUEL
VALVE GP-SOLENOID
PUMP GP-FUEL PRIMING
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
BATTERY GP

WHEEL HARVESTER 580B WHEEL HARVESTER CLT
 580B Wheel Harvester CLT00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3360 580B CLT   (2001)

FUEL SYSTEM

PUMP GP-UNIT INJECTOR HYD
PUMP & MTG GP-UNIT INJ HYD
183-2859 PUMP & MTG GP-UNIT INJ HYD
PUMP GP-UNIT INJECTOR HYD
186-3410 PUMP GP-UNIT INJECTOR HYD
 

#SEBP33600090
 

186-3410: PUMP GP-UNIT INJECTOR HYD

186-3410 PUMP GP-UNIT INJECTOR HYD
S/N BMA1-UP
PART OF 183-2859 PUMP & MTG GP-UNIT INJ HYD
CANNOT BE USED WITH ATTACHED FUEL TRANSFER PUMP
i01503623 SEBP3360
1863410 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-5053 Y [1] VALVE GP-SOLENOID  
2. 128-3473 [1] GEAR-PUMP DRIVE (36 TEETH)  
4. 4P-5918 [1] CLIP  
5. 8T-4200 M [2] BOLT (M8X1.25X16MM)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2MM THK)  
7. 118-0275 [1] WASHER  
8. 131-1845 [1] PLUG-HEX SOCKET  
9. 144-7339 [1] SEAL-O-RING  
10. 8T-4139 M [1] BOLT (M12X1.75X30MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33600091
 

159-0723: TANK GP-FUEL

159-0723 TANK GP-FUEL
S/N CLT1-UP
PART OF 192-8572 CHASSIS AR
i01491752 SEBP3360
1590723 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-7700 [1] CAP AS-FUEL TANK  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
    (INCLUDES FILTER AS, SCREWS, GASKETS & VALVE)
  9X-8600 [1] SEAL-O-RING  
2. 8U-5259 [1] VALVE AS  
3. 9P-7121 [1] STRAINER-FUEL TANK  
4. 122-1608 I [1] HOSE AS  
5. 175-4034 C [1] SENDER AS (FUEL LEVEL)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2 PIN)  
  186-3735 [2] PIN-CONNECTOR  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
6. 165-2268 [5] BOLT (M5X0.8X20)  
7. 169-4662 Y [1] TANK GP-FUEL  
8. 3J-1907 [3] SEAL-O-RING  
9. 6V-8397 [3] SEAL-O-RING  
10. 6V-8636 [1] CONNECTOR  
11. 6V-9829 [1] CAP AS  
12. 9S-4191 [2] PLUG-STRAIGHT THREAD  
13. 9R-7240 C [1] GASKET  
14. 4B-4274 [5] WASHER (5.5X13X1.2MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP33600092
 

169-4662: TANK GP-FUEL

169-4662 TANK GP-FUEL
S/N CLT1-UP
PART OF 159-0723, 230-4097 TANK GP-FUEL
i01023364 SEBP3360
1694662 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-0064 [1] TANK AS  
  9X-2206 [1] ADAPTER AS-FUEL  
  8T-4171 M [2] BOLT (M6X1.0X12MM)  
2. 164-0065 [1] PLATE AS  
3. 165-2432 [1] SEAL  
4. 169-5729 [1] INSULATION  
5. 8T-4121 [8] WASHER (2.5MM THK)  
6. 8T-4133 M [8] NUT (M10X1.50 THD)  
  M   METRIC PART
 

#SEBP33600093
 

230-4097: TANK GP-FUEL

230-4097 TANK GP-FUEL
S/N CLT1-UP
PART OF 192-8572 CHASSIS AR
i01899640 SEBP3360
2304097 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-7700 J [1] CAP AS-FUEL TANK (VENTED LOCKING)  
  9X-8600 [1] SEAL-O-RING  
2. 8U-5259 [1] VALVE AS  
3. 9P-7121 [1] STRAINER-FUEL  
4. 122-1608 I [1] HOSE AS  
5. 165-2268 [5] BOLT (M5X0.8X20)  
6. 169-4662 Y [1] TANK GP-FUEL  
7. 223-4654 [1] SENDER GP-FUEL LEVEL  
  9R-7240 [1] GASKET  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
  186-3735 [2] PIN-CONNECTOR  
8. 3J-1907 [3] SEAL-O-RING  
9. 4B-4274 [5] WASHER (5.5X13X1.2MM THK)  
10. 6V-8397 [3] SEAL-O-RING  
11. 6V-8636 [1] CONNECTOR  
12. 6V-9829 [1] CAP AS (FUEL)  
13. 9S-4191 [2] PLUG (9/16-18 THD)  
   
    AVAILABLE REPAIR KIT(S):
  9X-2205 J [1] KIT-CAP FILTER (FUEL TANK)  
  I   SEE HOSE FABRICATION GUIDE
  J   PART MARKED J INCLUDES KIT MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP33600094
 

122-5053: VALVE GP-SOLENOID

122-5053 VALVE GP-SOLENOID -INJECTION ACTUATION
S/N BMA1-UP
PART OF 186-3410 PUMP GP-UNIT INJECTOR HYD
i01503692 SEBP3360
1225053 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. JZ [1] SEAL-O-RING  
2. JZ [1] RING-BACKUP  
3. JZ [1] SPACER  
4. JZ [1] NUT-RETAINER  
5. JZ [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  9X-1484 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PARTS MARKED J
  Z   NOT SERVICED SEPARATELY
 

#SEBP33600095
 

190-8977: WATER SEP & FUEL PRM PUMP GP

190-8977 WATER SEP & FUEL PRM PUMP GP
S/N BMA1-UP
PART OF 188-6121 PUMP GP-FUEL PRM & PRIM FILTER
i01548758 SEBP3360
1908977 WATER SEP & FUEL PRM PUMP GP Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9570 Y [1] FILTER GP-WATER SEP & FUEL (PRIMARY)  
2. 190-8970 [1] BASE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP33600096
 

150-1935: ALTERNATOR GP-CHARGING

150-1935 ALTERNATOR GP-CHARGING
S/N CLT1-UP
24 VOLT, 150 AMPERE
PART OF 192-8613 ALTERNATOR GP-CHARGING
i01114728 SEBP3360
1501935 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-0280 [1] BOLT  
2. 8L-9375 [1] BOLT-CARRIAGE  
3. 175-0279 [1] BOLT  
4. 174-0646 [1] DIODE  
5. 174-0648 [1] HOLDER  
6. 174-0650 [1] RING  
7. 174-0651 [1] HOLDER  
8. 174-0652 [1] RING  
9. 174-0653 [1] WIRE  
10. 174-0654 [1] BEARING  
11. 174-0656 [1] FAN  
12. 174-0657 [1] SPACER  
13. 174-0658 [1] SEAL  
14. 174-0659 [1] GASKET  
15. 174-0660 [1] RETAINER  
16. 174-0664 [1] SEAL  
17. 174-0639 [1] STATOR  
18. 174-0640 [1] ROTOR  
19. 174-0643 [1] BEARING  
20. 174-0644 [1] RACE  
21. 174-0662 [1] BRUSH  
22. 174-6752 [3] CABLE  
23. 174-6753 [6] STRAP  
24. 174-6757 [1] GASKET  
25. 174-6758 [1] BOARD  
26. 174-6759 [1] CABLE  
27. 179-3322 [1] KIT-REGULATOR  
    (INCLUDES 24 VOLT REGULATOR AND BOLTS)
28. 179-3323 [1] KIT-HARDWARE  
    (INCLUDES LOCKNUT, SCREWS-HEX DRIVE, BOLTS, WASHERS, WOODRUFF KEY-NO. 8, SCREWS-TAPPING, BUSHING, STUDS, RETAINING RING)
29. 179-3324 [1] KIT-TERMINAL  
    (INCLUDES NUTS, WASHERS, INSULATORS, AND CAP-STUDS)
30. 179-3321 [1] KIT-FRONT HOUSING (FRONT HOUSING KIT)  
    (INCLUDES FRONT HOUSING AND BOLTS)
31. 179-6978 [1] KIT-INSULATOR  
    (INCLUDES INSULATORS)
32. 174-0641 [1] HOUSING  
33. 174-0655 [1] BRUSH  
34. 3N-1200 [1] RING AS-SLIP  
35. 7D-6922 [3] LOCKNUT (6-32 THD)  
36. 174-6760 [1] RETAINER  
 

#SEBP33600097
 

192-8613: ALTERNATOR GP-CHARGING

192-8613 ALTERNATOR GP-CHARGING
S/N CLT1-UP
24 VOLT, 150 AMPERE
PART OF 192-8573 INSTALLATION AR-ENGINE
i01497434 SEBP3360
1928613 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-6518 [1] SPACER  
2. 150-1935 Y [1] ALTERNATOR GP-CHARGING  
3. 192-8607 [1] BRACKET AS  
  8T-3597 FM [2] NUT-WELD (M12X1.75 THD)  
4. 198-5061 [1] GUARD-PULLEY  
5. 123-0858 [1] PULLEY-ALTERNATOR  
6. 183-4494 [1] BELT  
7. 8T-4194 M [2] BOLT (M12X1.75X50MM)  
8. 8T-4223 [3] WASHER-HARD (13.5X25.5X3MM THK)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2MM THK)  
10. 8T-4908 M [4] BOLT (M8X1.25X25MM)  
11. 8T-8917 [1] BOLT (1/2-13X1.25 IN)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP33600098
 

192-8551: BATTERY & WIRING GP

192-8551 BATTERY & WIRING GP
S/N CLT1-212
PART OF 192-8572 CHASSIS AR
i01491166 SEBP3360
1928551 BATTERY & WIRING GP Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-8867 [1] CABLE AS  
  5P-0761 E CABLE (00GA)(RED)(11CM)  
  9G-0003 [1] COVER-TERMINAL (BLACK)  
  9G-0004 [1] COVER-TERMINAL (RED)  
  9W-3416 [1] TERMINAL AS  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT-BATTERY TERMINAL (5/16-18X1.375 IN)  
  1M-6120 [1] NUT-BATTERY TERMINAL (5/16-18 THD)  
  9W-3723 [1] TERMINAL AS  
  1M-6119 [1] BOLT-BATTERY TERMINAL (5/16-18X1.375 IN)  
  1M-6120 [1] NUT-BATTERY TERMINAL (5/16-18 THD)  
  8T-9757 [1] TERMINAL AS-BATTERY (NEGATIVE)  
2. 179-7007 [1] ANGLE  
3. 192-8552 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5 THD)  
4. 192-8555 [3] ROD  
5. 115-5593 [1] CABLE AS  
  1S-7252 [1] TERMINAL-RING (FOR 3/8 IN BOLT)  
  5P-0747 E CABLE (00GA)(BLACK)(119CM)  
  7N-5274 [1] COVER-TERMINAL (BLACK)  
  9W-3459 [1] TERMINAL AS-BATTERY  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT-BATTERY TERMINAL (5/16-18X1.375 IN)  
  1M-6120 [1] NUT-BATTERY TERMINAL (5/16-18 THD)  
6. 5C-7261 M [4] NUT (M8X1.25 THD)  
7. 131-3540 M [3] LOCKNUT (M8X1.25 THD)  
8. 214-7402 [1] CABLE AS  
  1S-7251 [1] TERMINAL-RING (FOR 1/2 IN BOLT)  
  5P-0761 E CABLE (00GA)(RED)(84CM)  
  8N-1725 [1] COVER-TERMINAL (RED)  
9. 205-7299 [11] CLIP  
10. 9X-5630 [1] RECEPTACLE AS  
  1S-7251 [2] TERMINAL-RING (FOR 1/2 IN BOLT)  
  5P-0747 E CABLE (00GA)(BLACK)(58CM)  
  5P-0761 E CABLE (00GA)(RED)(170CM)  
11. 8S-2634 [1] COVER AS  
  2P-2975 [2] SEAL-O-RING  
12. 8T-4121 [14] WASHER-HARD (11X21X2.5MM THK)  
13. 8T-4133 M [5] NUT (M10X1.5 THD)  
14. 8T-4136 M [14] BOLT (M10X1.5X25MM)  
15. 8T-4224 [12] WASHER-HARD (8.8X16X2MM THK)  
16. 214-7405 [1] CABLE AS  
  1S-7251 [1] TERMINAL-RING (FOR 1/2 IN BOLT)  
  1S-7252 [1] TERMINAL-RING (FOR 3/8 IN BOLT)  
  5P-0761 E CABLE (00GA)(RED)(65CM)  
17. 9X-3404 [2] BATTERY-MAINTENANCE FREE (12 VOLT)(900 AMP)  
18. 5G-6505 [3] WASHER  
19. 6V-8188 [6] NUT (1/2-13 THD)  
20. 7F-0560 [6] WASHER (2.57MM THK)  
21. 8C-6358 [1] JUNCTION BLOCK AS  
  1D-5117 [3] NUT-JAM (1/2-13 THD)  
  8T-3519 [3] BOLT-BRONZE (1/2-13X2.0 IN)  
22. 8N-0869 [3] COVER-TERMINAL (RED)  
23. 8T-7547 M [4] BOLT (M8X1.25X30MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP33600099
 

192-8551: BATTERY & WIRING GP

192-8551 BATTERY & WIRING GP
S/N CLT213-UP
PART OF 192-8572 CHASSIS AR
i01864755 SEBP3360
1928551 BATTERY & WIRING GP Parts scheme
  For full view, you need register

Parts for your 580B WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-8867 [1] CABLE AS  
  5P-0761 E CABLE (00GA)(RED)(11CM)  
  9G-0003 [1] COVER-TERMINAL (BLACK)  
  9G-0004 [1] COVER-TERMINAL (RED)  
  9W-3416 [1] TERMINAL AS  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375 IN)  
  1M-6120 [1] NUT (5/16-18 THD)  
  9W-3723 [1] TERMINAL AS  
  1M-6119 [1] BOLT (5/16-18X1.375 IN)  
  1M-6120 [1] NUT (5/16-18 THD)  
  8T-9757 [1] TERMINAL AS-BATTERY (NEGATIVE)  
2. 179-7007 [1] ANGLE  
3. 192-8552 [1] PLATE AS  
  8T-3490 M [6] NUT-WELD (M10X1.5 THD)  
4. 192-8555 [3] ROD  
5. 229-7519 C [1] CABLE AS  
  1S-7252 [1] TERMINAL-RING  
  5P-0747 E CABLE (00GA)(BLACK)(119CM)  
  7N-5274 [1] COVER-TERMINAL (BLACK)  
  9W-3459 [1] TERMINAL AS-BATTERY  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375 IN)  
  1M-6120 [1] NUT (5/16-18 THD)  
6. 5C-7261 M [4] NUT (M8X1.25 THD)  
7. 131-3540 M [3] LOCKNUT (M8X1.25 THD)  
8. 214-7402 [1] CABLE AS  
  1S-7251 [1] TERMINAL-RING  
  5P-0761 E CABLE (00GA)(RED)(84CM)  
  8N-1725 [1] COVER-TERMINAL (RED)  
9. 205-7299 C [10] CLIP  
10. 9X-5630 [1] RECEPTACLE AS  
  1S-7251 [2] TERMINAL-RING  
  5P-0747 E CABLE (00GA)(BLACK)(58CM)  
  5P-0761 E CABLE (00GA)(RED)(170CM)  
11. 8S-2634 [1] COVER AS  
  2P-2975 [2] SEAL-O-RING  
12. 8T-4121 [14] WASHER-HARD (11X21X2.5MM THK)  
13. 8T-4133 CM [2] NUT (M10X1.5 THD)  
14. 8T-4136 M [14] BOLT (M10X1.5X25MM)  
15. 8T-4224 [12] WASHER-HARD (8.8X16X2MM THK)  
16. 214-7405 [1] CABLE AS  
  1S-7251 [1] TERMINAL-RING  
  1S-7252 [1] TERMINAL-RING  
  5P-0761 E CABLE (00GA)(RED)(65CM)  
17. 9X-3404 [2] BATTERY (12 VOLT)  
18. 5G-6505 [3] WASHER  
19. 6V-8188 [6] NUT (1/2-13 THD)  
20. 7F-0560 [6] WASHER (2.57MM THK)  
21. 8C-6358 [1] JUNCTION BLOCK AS  
  1D-5117 [3] NUT-JAM (1/2-13 THD)  
  8T-3519 [3] BOLT-BRONZE (1/2-13X2.0 IN)  
22. 8N-0869 C [2] COVER-TERMINAL (RED)  
23. 8T-7547 M [4] BOLT (M8X1.25X30MM)  
24. 5W-2003 C [1] CAP-PROTECTION  
25. 9X-6932 C [1] BOOT-TERMINAL  
26. 6K-8178 C [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Special Instruction
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Specifications
Injection Actuation Pressure Control Valve
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Troubleshooting
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Disassembly and Assembly
Injection Actuation Pressure Control Valve - Remove and Install
3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
3126B Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 580B :

PUMP GP-UNIT INJECTION
178-0198 PUMP GP-UNIT INJECTION
PUMP GP-FUEL PRM & PRIM FILTER
188-6121 PUMP GP-FUEL PRM & PRIM FILTER
PUMP & MTG GP-UNIT INJ HYD
183-2859 PUMP & MTG GP-UNIT INJ HYD
LINES GP-FUEL FILTER
238-7862 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
198-0032 LINES GP-FUEL FILTER
LINES GP-FUEL
192-8575 LINES GP-FUEL
INJECTOR GP-FUEL
178-0199 INJECTOR GP-FUEL
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
TANK GP-FUEL
159-0723 TANK GP-FUEL
TANK GP-FUEL
169-4662 TANK GP-FUEL
TANK GP-FUEL
230-4097 TANK GP-FUEL
VALVE GP-SOLENOID
122-5053 VALVE GP-SOLENOID
WATER SEP & FUEL PRM PUMP GP
190-8977 WATER SEP & FUEL PRM PUMP GP
ALTERNATOR GP-CHARGING
150-1935 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
192-8613 ALTERNATOR GP-CHARGING
BATTERY & WIRING GP
192-8551 BATTERY & WIRING GP

Truck sale:

CATERPILLAR 580B 1973
$5,000 USD 
CATERPILLAR 580B 1973
- FORESTRY - HARVESTER
NMC CAT
11002 Sapp Bros. Dr. - Omaha - Nebrask
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.