192-6847 LINES GP-BOOM S/N DKY1-UP PART OF 186-1275 BOOM AR-1 PIECE LONG Type 1 AN ATTACHMENT 330C L

HYDRAULIC SYSTEM

LINES GP-BOOM

0. 192-6847 LINES GP-B
1. 192-6847 LINES GP-B
2. 192-6848 LINES GP-B
3. 192-6848 LINES GP-B

LINES GP-CYLINDER

4. 192-6894 LINES GP-B
5. 192-6908 LINES GP-B
6. 192-6909 LINES GP-B
7. 223-7090 LINES GP-B
8. 223-7090 LINES GP-B

LINES GP-DRAIN

9. 193-6383 LINES GP-B
0. INFORMATION

EXCAVATOR 330C L EXCAVATOR DKY
330C L Excavator DKY00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3366 330C L DKY (2001)

HYDRAULIC SYSTEM

LINES GP-BOOM

191-5545 CYLINDER & LINES GP-BOOM

191-5546 CYLINDER & LINES GP-BOOM

192-6847 LINES GP-BOOM

192-6848 LINES GP-BOOM

#SEBP33660440

192-6847: LINES GP-BOOM

LINES GP-BOOM

192-6847 LINES GP-BOOM
S/N DKY1-UP
PART OF 186-1275 BOOM AR-1 PIECE LONG
Type 1
AN ATTACHMENT

i01593421 SEBP3366

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	124-1107	[3]	GROMMET
2.	129-5874	[10]	GROMMET
3.	138-5709	[3]	GROMMET
4.	194-0409	[1]	TUBE AS
5.	194-0410	[1]	TUBE AS
6.	196-0476	[1]	TUBE AS
7.	196-0479	[1]	TUBE AS
8.	196-0482	[8]	CLIP
9.	196-0804 I	[1]	HOSE AS
10.	207-6395 J	[1]	TUBE GP-HYDRAULIC (BOOM)
10A.	1P-3704 L	[1]	SEAL-RECTANGULAR
10B.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
10C.	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
10D.	196-0477 L	[1]	TUBE AS
10E.	196-0478 L	[1]	TUBE AS
11.	207-6398 J	[1]	TUBE GP-HYDRAULIC (BOOM)
11A.	1P-3704 L	[1]	SEAL-RECTANGULAR
11B.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
11C.	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
11D.	196-0480 L	[1]	TUBE AS
11E.	196-0481 L	[1]	TUBE AS
12.	196-0498 I	[1]	HOSE AS
13.	124-1106	[2]	CLIP
14.	124-1108	[8]	CLIP
15.	124-1109	[2]	CLIP
16.	1P-3704	[4]	SEAL-RECTANGULAR
17.	1P-3705	[2]	SEAL-RECTANGULAR
18.	1P-5767	[4]	FLANGE-HALF
19.	5P-8077	[4]	FLANGE-HALF
20.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
21.	8T-4140 M	[18]	BOLT (M16X2X60-MM)
22.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
23.	8T-4194 M	[8]	BOLT (M12X1.75X50-MM)
24.	8T-4223	[26]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
26.	9X-8257	[18]	WASHER (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN)
	L		PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN
	M		METRIC PART

#SEBP33660441

192-6847: LINES GP-BOOM

LINES GP-BOOM

192-6847 LINES GP-BOOM
S/N DKY1-UP
PART OF 186-1275 BOOM AR-1 PIECE LONG
Type 2
AN ATTACHMENT

i02571498 SEBP3366

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	194-0409	[1]	TUBE AS
2.	194-0410	[1]	TUBE AS
3.	196-0476	[1]	TUBE AS
4.	207-6395 J	[1]	TUBE GP-HYDRAULIC (BOOM)
4A.	1P-3704 L	[1]	SEAL-RECTANGULAR
4B.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
4C.	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
4D.	196-0477 L	[1]	TUBE AS
4E.	196-0478 L	[1]	TUBE AS
5.	207-6398 J	[1]	TUBE GP-HYDRAULIC (BOOM)
5A.	1P-3704 L	[1]	SEAL-RECTANGULAR
5B.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
5C.	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
5D.	196-0480 L	[1]	TUBE AS
5E.	196-0481 L	[1]	TUBE AS
6.	196-0804 I	[1]	HOSE AS
7.	196-0479	[1]	TUBE AS
8.	8T-4140 M	[18]	BOLT (M16X2X60-MM)
9.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
10.	223-6915 CI	[1]	HOSE AS
11.	124-1109	[2]	CLIP
12.	129-5874	[10]	GROMMET
13.	8T-4223	[26]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
15.	9X-8257	[18]	WASHER (17.5X30X3.5-MM THK)
16.	5P-8077	[4]	FLANGE-HALF
17.	124-1106	[2]	CLIP
18.	138-5709	[3]	GROMMET
19.	124-1107	[3]	GROMMET
20.	196-0482	[8]	CLIP
21.	124-1108	[8]	CLIP
22.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
23.	1P-3704	[4]	SEAL-RECTANGULAR
24.	8T-4194 M	[8]	BOLT (M12X1.75X50-MM)
25.	1P-5767	[4]	FLANGE-HALF
26.	1P-3705	[2]	SEAL-RECTANGULAR
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN)
	L		PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN
	M		METRIC PART

#SEBP33660442

192-6848: LINES GP-BOOM

LINES GP-BOOM

192-6848 LINES GP-BOOM
S/N DKY1-1139
PART OF 212-7525 BOOM AR
AN ATTACHMENT

i01643806 SEBP3366

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	204-8207	[1]	TUBE AS
2.	204-8208	[1]	TUBE AS
3.	204-8209	[1]	TUBE AS
4.	204-8211	[1]	TUBE AS
5.	212-5580 J	[1]	TUBE GP-HYDRAULIC (BOOM)
5A.	204-8210 L	[1]	TUBE AS
5B.	196-0478 L	[1]	TUBE AS
5C.	1P-3704 L	[1]	SEAL-RECTANGULAR
5D.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	212-5583 J	[1]	TUBE GP-HYDRAULIC (BOOM)
6A.	204-8212 L	[1]	TUBE AS
6B.	196-0481 L	[1]	TUBE AS
6C.	1P-3704 L	[1]	SEAL-RECTANGULAR
6D.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
8.	8T-4140 M	[18]	BOLT (M16X2X60-MM)
9.	196-0804 I	[1]	HOSE AS
10.	196-0498 I	[1]	HOSE AS
11.	124-1109	[2]	CLIP
12.	129-5874	[10]	GROMMET
13.	8T-4223	[26]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
15.	9X-8257	[18]	WASHER (17.5X30X3.5-MM THK)
16.	5P-8077	[4]	FLANGE-HALF
17.	124-1106	[2]	CLIP
18.	138-5709	[3]	GROMMET
19.	124-1107	[3]	GROMMET
20.	196-0482	[8]	CLIP
21.	124-1108	[8]	CLIP
22.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
23.	1P-3704	[4]	SEAL-RECTANGULAR
24.	8T-4194 M	[8]	BOLT (M12X1.75X50-MM)
25.	1P-5767	[4]	FLANGE-HALF
26.	1P-3705	[2]	SEAL-RECTANGULAR
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN)
	L		PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN
	M		METRIC PART

#SEBP33660443

192-6848: LINES GP-BOOM

LINES GP-BOOM

192-6848 LINES GP-BOOM
S/N DKY1140-UP
PART OF 212-7525 BOOM AR
AN ATTACHMENT

i01929947 SEBP3366

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	124-1107	[3]	GROMMET
2.	129-5874	[10]	GROMMET
3.	138-5709	[3]	GROMMET
4.	196-0482	[8]	CLIP
5.	196-0804 I	[1]	HOSE AS
6.	204-8207	[1]	TUBE AS
7.	204-8208	[1]	TUBE AS
8.	204-8209	[1]	TUBE AS
9.	204-8211	[1]	TUBE AS
10.	212-5580 J	[1]	TUBE GP-HYDRAULIC (BOOM)
10A.	204-8210 L	[1]	TUBE AS
10B.	196-0478 L	[1]	TUBE AS
10C.	1P-3704 L	[1]	SEAL-RECTANGULAR
10D.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
11.	212-5583 J	[1]	TUBE GP-HYDRAULIC (BOOM)
11A.	204-8212 L	[1]	TUBE AS
11B.	196-0481 L	[1]	TUBE AS
11C.	1P-3704 L	[1]	SEAL-RECTANGULAR
11D.	8T-4183 LM	[4]	BOLT (M12X1.75X40-MM)
	8T-4223 L	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
12.	223-6915 CI	[1]	HOSE AS
13.	124-1106	[2]	CLIP
14.	124-1108	[8]	CLIP
15.	124-1109	[2]	CLIP
16.	1P-3704	[4]	SEAL-RECTANGULAR
17.	1P-3705	[2]	SEAL-RECTANGULAR
18.	1P-5767	[4]	FLANGE-HALF
19.	5P-8077	[4]	FLANGE-HALF
20.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
21.	8T-4140 M	[18]	BOLT (M16X2X60-MM)
22.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
23.	8T-4194 M	[8]	BOLT (M12X1.75X50-MM)
24.	8T-4223	[26]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	8T-4956 M	[6]	BOLT (M12X1.75X35-MM)
26.	9X-8257	[18]	WASHER (17.5X30X3.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		TUBE MAY BE 1-PIECE OR 2-PIECE DESIGN (2-PIECE SHOWN)
	L		PARTS REQUIRED ONLY WITH 2-PIECE TUBE DESIGN
	M		METRIC PART

#SEBP33660444

192-6894: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

192-6894 LINES GP-BOOM CYLINDER
S/N DKY1-UP
BOOM LOWERING CONTROL
PART OF 190-7802 VALVE AR-CHECK & RELIEF
AN ATTACHMENT

i01642296 SEBP3366

1926894 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	115-8856	[2]	SUPPORT AS
2.	124-0887	[1]	SUPPORT AS
3.	124-0891	[1]	SUPPORT AS
4.	134-6943 I	[2]	HOSE AS
5.	196-8731 Y	[2]	VALVE GP-LOAD CONTROL (BOOM CYLINDER)
6.	207-6228	[1]	TUBE AS
7.	207-6229	[1]	TUBE AS
8.	108-7550	[4]	CLIP
9.	148-8336	[4]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8636	[1]	CONNECTOR
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
10.	148-8433	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
11.	1P-3703	[2]	SEAL-RECTANGULAR
12.	1P-3704	[2]	SEAL-RECTANGULAR
13.	5K-9090	[2]	SEAL-O-RING
14.	7K-1181	[8]	STRAP-CABLE
15.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
16.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
17.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
18.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
20.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33660445

192-6908: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

192-6908 LINES GP-BOOM CYLINDER -LH
S/N DKY1-UP
PART OF 191-5545 CYLINDER & LINES GP-BOOM
AN ATTACHMENT

i01593398 SEBP3366

1926908 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1P-3703	[2]	SEAL-RECTANGULAR
2.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
3.	204-8358	[1]	TUBE AS
4.	204-8359	[1]	TUBE AS
5.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
7.	124-0887	[1]	SUPPORT AS
8.	108-7550	[2]	CLIP
9.	115-8856	[1]	SUPPORT AS
10.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
12.	5K-9090	[2]	SEAL-O-RING
	M		METRIC PART

#SEBP33660446

192-6909: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

192-6909 LINES GP-BOOM CYLINDER -RH
S/N DKY1-UP
PART OF 191-5546 CYLINDER & LINES GP-BOOM
AN ATTACHMENT

i01593402 SEBP3366

1926909 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	1P-3703	[2]	SEAL-RECTANGULAR
2.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
3.	204-8360	[1]	TUBE AS
4.	204-8361	[1]	TUBE AS
5.	115-8856	[1]	SUPPORT AS
6.	124-0891	[1]	SUPPORT AS
7.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
9.	108-7550	[2]	CLIP
10.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
12.	5K-9090	[2]	SEAL-O-RING
	M		METRIC PART

#SEBP33660447

223-7090: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

223-7090 LINES GP-BOOM CYLINDER
S/N DKY1-UP
PART OF 190-7802 VALVE AR-CHECK & RELIEF
Type 1
AN ATTACHMENT

i02271142 SEBP3366

2237090 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	7K-1181	[14]	STRAP-CABLE
2.	115-8856	[2]	SUPPORT AS
3.	133-5813	[4]	BAND-MARKER (GRAY, P)
4.	149-1738	[4]	CLIP
5.	196-8731 Y	[2]	VALVE GP-LOAD CONTROL (BOOM CYLINDER)
6.	207-6228	[1]	TUBE AS
7.	207-6229	[1]	TUBE AS
8.	223-7098	[1]	TUBE AS
9.	223-7100	[1]	SUPPORT AS
10.	223-7103	[1]	TUBE AS
11.	223-7105	[1]	SUPPORT AS
12.	227-0246 I	[2]	HOSE AS
13.	227-0249 I	[2]	HOSE AS
14.	227-0252 I	[2]	HOSE AS
15.	108-7550	[4]	CLIP
16.	148-8336	[8]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
17.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
18.	148-8382	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
	8T-0404	[1]	ELBOW
19.	1P-3703	[2]	SEAL-RECTANGULAR
20.	1P-3704	[2]	SEAL-RECTANGULAR
21.	5K-9090	[2]	SEAL-O-RING
22.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
24.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
25.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
27.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33660448

223-7090: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

223-7090 LINES GP-BOOM CYLINDER
S/N DKY1-UP
PART OF 190-7802 VALVE AR-CHECK & RELIEF
Type 2
AN ATTACHMENT

i02397387 SEBP3366

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	7K-1181	[14]	STRAP-CABLE
2.	115-8856	[2]	SUPPORT AS
3.	133-5813	[4]	BAND-MARKER (GRAY, P)
4.	149-1738	[4]	CLIP
5.	196-8731 Y	[2]	VALVE GP-LOAD CONTROL (BOOM CYLINDER)
6.	207-6228	[1]	TUBE AS
7.	207-6229	[1]	TUBE AS
8.	223-7098	[1]	TUBE AS
9.	223-7100	[1]	SUPPORT AS
10.	223-7103	[1]	TUBE AS
11.	223-7105	[1]	SUPPORT AS
12.	227-0246 I	[2]	HOSE AS
13.	227-0249 I	[2]	HOSE AS
14.	227-0252 I	[2]	HOSE AS
15.	108-7550	[4]	CLIP
16.	148-8336	[8]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
17.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
18.	148-8382	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
	8T-0404	[1]	ELBOW
19.	1P-3703	[2]	SEAL-RECTANGULAR
20.	1P-3704	[2]	SEAL-RECTANGULAR
21.	5K-9090	[2]	SEAL-O-RING
22.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
24.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
25.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
27.	8T-4910 M	[8]	BOLT (M12X1.75X60-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP33660449

193-6383: LINES GP-BOOM DRAIN

LINES GP-BOOM DRAIN

193-6383 LINES GP-BOOM DRAIN
S/N DKY1-UP
REACH BOOM
AN ATTACHMENT

i01591920 SEBP3366

1936383 LINES GP-BOOM DRAIN Parts scheme

For full view, you need register

Parts for your 330C L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	187-9861	[1]	CLIP
2.	187-9862	[1]	PLATE
3.	193-6652	[2]	SUPPORT AS
4.	193-6655	[4]	PLATE
5.	193-6663	[1]	TUBE AS
6.	193-6664	[1]	TUBE AS
7.	193-6665	[1]	TUBE AS
8.	202-7001	[4]	CLIP
9.	093-1291	[3]	CLAMP
10.	202-7019	[1]	SUPPORT AS
11.	6V-8398	[2]	SEAL-O-RING
12.	7J-9108	[2]	SEAL-O-RING
13.	7Y-4868	[1]	CLIP
14.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[1]	NUT (M10X1.5-THD)
16.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
17.	8T-4173 M	[8]	BOLT (M16X2X110-MM)
18.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
19.	8T-4184 M	[2]	BOLT (M12X1.75X45-MM)
20.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
21.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4244 M	[4]	NUT (M12X1.75-THD)
23.	9X-8257	[8]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART