AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

217-6719 ACTUATOR GP-PILOT CONTROL -REGENERATION VALVE-PROPORTIONAL SOLENOID S/N BNH1-UP PART OF 212-8712, 212-8746 VALVE GP-MAIN CONTROL, 273-2130 VALVE GP-REGENERATION 988G


HYDRAULIC SYSTEM
ACTUATOR GP
CONTROL GP-RIDE

WHEEL LOADER 988G WHEEL LOADER BNH
 988G Wheel Loader BNH00001-UP (MACHINE) POWERED BY 3456 Engine SEBP3378 988G BNH   (2001)

HYDRAULIC SYSTEM

ACTUATOR GP
ACTUATOR GP-PILOT CONTROL
217-6719 ACTUATOR GP-PILOT CONTROL
ACTUATOR GP-PILOT CONTROL
217-6719 ACTUATOR GP-PILOT CONTROL
ACTUATOR GP-PILOT CONTROL
217-6720 ACTUATOR GP-PILOT CONTROL
 

#SEBP33780550
 

217-6719: ACTUATOR GP-PILOT CONTROL

217-6719 ACTUATOR GP-PILOT CONTROL -REGENERATION VALVE-PROPORTIONAL SOLENOID
S/N BNH1-UP
PART OF 212-8712, 212-8746 VALVE GP-MAIN CONTROL, 273-2130 VALVE GP-REGENERATION
i01659499 SEBP3378
2176719 ACTUATOR GP-PILOT CONTROL Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5083 [1] HOUSING  
2. 118-5085 [1] RETAINER  
3. 118-5086 [1] SPRING  
4. 118-5087 [1] SPRING  
5. 148-2350 [1] COIL AS  
6. 154-4133 [1] CARTRIDGE AS  
7. 155-2251 [1] PLATE  
8. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
9. 162-0177 [2] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
10. 030-4605 [1] SEAL-O-RING  
11. 146-3728 [1] WASHER-SPRING  
12. 121-2051 [1] SPRING  
13. 177-1405 [1] SPRING  
14. 1P-3709 [1] SEAL-RECTANGULAR  
15. 2D-6648 [1] RING-RETAINING  
16. 3C-8388 [2] PIN-ROLL  
17. 6K-0806 [1] STRAP-CABLE  
18. 5H-6005 [2] SEAL-O-RING  
19. 8T-3998 M [4] BOLT (M4X0.7X12-MM)  
20. 6V-0852 [1] CAP-DUST  
  M   METRIC PART
 

#SEBP33780551
 

217-6719: ACTUATOR GP-PILOT CONTROL

217-6719 ACTUATOR GP-PILOT CONTROL -REGENERATION VALVE-PROPORTIONAL SOLENOID
S/N BNH1-UP
PART OF 212-8746 VALVE GP-MAIN CONTROL
i03790049 SEBP3378
2176719 ACTUATOR GP-PILOT CONTROL Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-5083 [1] HOUSING  
2. 438-6138 [1] RETAINER  
3. 118-5086 [1] SPRING  
4. 118-5087 [1] SPRING  
5. 326-5212 [1] COIL AS (24-VOLT)  
6. 316-1438 [1] CARTRIDGE AS  
7. 155-2251 [1] PLATE  
8. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
9. 366-4695 [2] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
10. 030-4605 [1] SEAL-O-RING  
11. 191-9247 [1] WASHER (19.15X31.65X2.36-MM THK)  
12. 121-2051 [1] SPRING  
13. 177-1405 [1] SPRING  
14. 1P-3709 [1] SEAL-RECTANGULAR  
15. 2D-6648 [1] RING-RETAINING  
16. 3C-8388 [2] PIN-ROLL  
17. 6K-0806 [1] STRAP-CABLE  
18. 5H-6005 [2] SEAL-O-RING  
19. 8T-3998 M [4] BOLT (M4X0.7X12-MM)  
20. 6V-0852 [1] CAP-DUST  
21. 198-2914 [1] NUT (3/4-32-THD)  
  M   METRIC PART
 

#SEBP33780552
 

217-6720: ACTUATOR GP-PILOT CONTROL

217-6720 ACTUATOR GP-PILOT CONTROL -HOIST CONTROL VALVE
S/N BNH1-UP
PART OF 212-8712, 212-8746 VALVE GP-MAIN CONTROL
i01659508 SEBP3378
2176720 ACTUATOR GP-PILOT CONTROL Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 198-2914 [1] NUT (3/4-32-THD)  
2. 438-6138 [1] RETAINER  
3. 118-5086 [1] SPRING  
4. 118-5087 [1] SPRING  
5. 326-5212 [1] COIL AS (24-VOLT)  
6. 316-1438 [1] CARTRIDGE AS  
  214-7568 [2] SEAL-O-RING  
7. 155-2251 [1] PLATE  
8. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
9. 366-4695 [2] PLUG AS  
    (EACH INCLUDES)
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
10. 030-4605 [1] SEAL-O-RING  
11. 191-9247 [1] WASHER (19.15X31.65X2.36-MM THK)  
12. 121-2051 [1] SPRING  
13. 177-1405 [1] SPRING  
14. 1P-3709 [1] SEAL-RECTANGULAR  
15. 2D-6648 [1] RING-RETAINING  
16. 3C-8388 [2] PIN-ROLL  
18. 5H-6005 [2] SEAL-O-RING  
19. 8T-3998 M [4] BOLT (M4X0.7X12-MM)  
20. 6V-0852 [1] CAP-DUST  
21. 6K-0806 [1] STRAP-CABLE  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP33780553
 

197-7356: CONTROL & LINES GP-RIDE

197-7356 CONTROL & LINES GP-RIDE
S/N BNH1-334
PART OF 155-6034 CONTROL AR-RIDE
i01437811 SEBP3378
1977356 CONTROL & LINES GP-RIDE Parts scheme 1977356 CONTROL & LINES GP-RIDE Parts scheme 1977356 CONTROL & LINES GP-RIDE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9552 Y [1] VALVE GP-RIDE CONTROL  
2. 154-8894 [1] BRACKET AS  
3. 154-8896 I [1] HOSE AS  
4. 159-8091 [1] BRACKET  
5. 167-0140 [1] BRACKET AS  
6. 174-9667 [1] BRACKET  
7. 174-9670 [2] CLAMP AS  
8. 176-3847 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
9. 179-0469 [1] SPACER (11X20X40-MM THK)  
10. 197-7357 [1] TUBE AS  
11. 197-7359 I [1] HOSE AS  
12. 197-7360 [2] SPACER  
13. 197-7362 [1] BRACKET AS  
14. 197-7365 [1] SPACER  
15. 198-6752 I [1] HOSE AS  
16. 198-6753 I [1] HOSE AS  
17. 198-8195 [1] BRACKET AS  
18. 198-8871 [1] TUBE AS  
19. 198-9189 [1] BRACKET AS  
20. 201-1003 [1] TUBE AS  
21. 201-1005 [1] TUBE AS  
22. 206-5027 [1] BRACKET AS  
23. 103-1303 [4] CLAMP-HALF  
24. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
25. 148-8352 [2] ELBOW AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
26. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
27. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
28. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
29. 1P-3704 [1] SEAL-RECTANGULAR  
30. 1P-3705 [4] SEAL-RECTANGULAR  
31. 1P-3706 [5] SEAL-RECTANGULAR  
32. 1P-4577 [2] FLANGE-HALF  
33. 1P-5767 [2] FLANGE-HALF  
34. 3E-9411 [6] WASHER-HARD (17.5X38X6-MM THK)  
35. 4J-0520 [1] SEAL-O-RING  
36. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
37. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
38. 5P-7464 [2] CLIP (SLOT)  
39. 5P-7465 [2] CLIP (TAB)  
40. 5P-7468 [2] CLIP (SLOT)  
41. 5P-7469 [2] CLIP (TAB)  
42. 5P-8077 [4] FLANGE-HALF  
43. 5P-8444 [2] GROMMET (37-MM ID)  
44. 5P-9299 [1] CLIP (LOOP)  
45. 6V-1249 [2] GROMMET (22-MM ID)  
46. 6V-8398 [1] SEAL-O-RING  
47. 7X-2475 M [8] BOLT (M16X2X130-MM)  
48. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
50. 8T-4139 M [13] BOLT (M12X1.75X30-MM)  
51. 8T-4140 M [4] BOLT (M16X2X60-MM)  
52. 8T-4173 M [8] BOLT (M16X2X110-MM)  
53. 8T-4183 M [3] BOLT (M12X1.75X40-MM)  
54. 8T-4193 M [8] BOLT (M16X2X50-MM)  
55. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
56. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
57. 8T-4196 M [5] BOLT (M10X1.5X35-MM)  
58. 8T-4223 [17] WASHER-HARD (13.5X25.5X3-MM THK)  
59. 8T-4244 M [3] NUT (M12X1.75-THD)  
60. 8T-4779 M [6] BOLT (M16X2X35-MM)  
61. 8T-6383 M [4] BOLT (M16X2X200-MM)  
62. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33780554
 

197-7356: CONTROL & LINES GP-RIDE

197-7356 CONTROL & LINES GP-RIDE
S/N BNH335-UP
PART OF 155-6034 CONTROL AR-RIDE
Type 1
i01662291 SEBP3378
1977356 CONTROL & LINES GP-RIDE Parts scheme 1977356 CONTROL & LINES GP-RIDE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9552 Y [1] VALVE GP-RIDE CONTROL  
2. 124-1718 C [1] SLEEVE  
3. 154-8894 [1] BRACKET AS  
4. 154-8896 I [1] HOSE AS  
5. 159-8091 [1] BRACKET  
6. 167-0140 [1] BRACKET AS  
7. 174-9667 [1] BRACKET  
8. 174-9670 [2] CLAMP AS  
9. 176-3847 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
10. 197-7360 [2] SPACER  
11. 198-6752 I [1] HOSE AS  
12. 198-6753 I [1] HOSE AS  
13. 198-8195 [1] BRACKET AS  
14. 198-8871 [1] TUBE AS  
15. 198-9189 [1] BRACKET AS  
16. 201-1003 [1] TUBE AS  
17. 201-1005 [1] TUBE AS  
18. 206-5027 [1] BRACKET AS  
19. 211-9013 C [1] SPACER  
20. 212-7790 C [1] BRACKET AS  
21. 212-7791 C [1] TUBE AS  
22. 212-7792 CI [1] HOSE AS  
23. 212-7793 C [1] BRACKET AS  
24. 103-1303 [4] CLAMP-HALF  
25. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
26. 148-8352 [2] ELBOW AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
27. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
28. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
29. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
30. 1P-3704 [1] SEAL-RECTANGULAR  
31. 1P-3705 [4] SEAL-RECTANGULAR  
32. 1P-3706 [5] SEAL-RECTANGULAR  
33. 1P-4577 [2] FLANGE-HALF  
34. 1P-5767 [2] FLANGE-HALF  
35. 3E-9411 [6] WASHER-HARD (17.5X38X6-MM THK)  
36. 4J-0520 [1] SEAL-O-RING  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-7464 [2] CLIP (SLOT)  
40. 5P-7465 [2] CLIP (TAB)  
41. 5P-7468 C [3] CLIP (SLOT)  
42. 5P-7469 C [3] CLIP (TAB)  
43. 5P-8077 [4] FLANGE-HALF  
44. 5P-8444 C [3] GROMMET (37-MM ID)  
45. 5P-9299 [1] CLIP (LOOP)  
46. 6V-1249 [2] GROMMET (22-MM ID)  
47. 6V-8398 [1] SEAL-O-RING  
48. 7X-2475 M [8] BOLT (M16X2X130-MM)  
49. 7Y-4038 C [2] CLAMP-HALF  
50. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
52. 8T-4139 M [13] BOLT (M12X1.75X30-MM)  
53. 8T-4140 M [4] BOLT (M16X2X60-MM)  
54. 8T-4172 CM [1] BOLT (M10X1.5X80-MM)  
55. 8T-4173 M [8] BOLT (M16X2X110-MM)  
56. 8T-4183 M [5] BOLT (M12X1.75X40-MM)  
57. 8T-4193 M [8] BOLT (M16X2X50-MM)  
58. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
59. 8T-4195 CM [5] BOLT (M10X1.5X30-MM)  
60. 8T-4196 M [5] BOLT (M10X1.5X35-MM)  
61. 8T-4223 [17] WASHER-HARD (13.5X25.5X3-MM THK)  
62. 8T-4244 M [3] NUT (M12X1.75-THD)  
63. 8T-4779 M [6] BOLT (M16X2X35-MM)  
64. 8T-6385 CM [4] BOLT (M16X2X180-MM)  
65. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33780555
 

197-7356: CONTROL & LINES GP-RIDE

197-7356 CONTROL & LINES GP-RIDE
S/N BNH335-UP
PART OF 155-6034 CONTROL AR-RIDE
Type 2
i01940905 SEBP3378
1977356 CONTROL & LINES GP-RIDE Parts scheme 1977356 CONTROL & LINES GP-RIDE Parts scheme 1977356 CONTROL & LINES GP-RIDE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-9552 Y [1] VALVE GP-RIDE CONTROL  
2. 124-1718 [1] SLEEVE  
3. 154-8894 [1] BRACKET AS  
4. 159-8091 [1] BRACKET  
5. 167-0140 [1] BRACKET AS  
6. 174-9667 [1] BRACKET  
7. 174-9670 [2] CLAMP AS  
8. 176-3847 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
9. 197-7360 [2] SPACER  
10. 198-9189 [1] BRACKET AS  
11. 206-5027 [1] BRACKET AS  
12. 211-9013 [1] SPACER  
13. 212-7790 [1] BRACKET AS  
14. 231-7717 C [1] ANGLE AS  
15. 231-7722 C [1] CLAMP AS  
16. 231-7724 C [1] CLAMP AS  
17. 231-7727 C [1] TUBE AS  
18. 103-1303 [4] CLAMP-HALF  
19. 148-8333 C [1] CONNECTOR AS  
20. 148-8352 C [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
21. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
22. 148-8387 C [1] ELBOW AS  
23. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
24. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
25. 164-4058 C [1] REDUCER AS  
26. 1P-3704 [1] SEAL-RECTANGULAR  
27. 1P-3705 [4] SEAL-RECTANGULAR  
28. 1P-3706 [5] SEAL-RECTANGULAR  
29. 1P-4577 [2] FLANGE-HALF  
30. 1P-5767 [2] FLANGE-HALF  
31. 3E-9411 [6] WASHER-HARD (17.5X38X6-MM THK)  
32. 4J-0520 [1] SEAL-O-RING  
33. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
34. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
35. 5P-7464 [2] CLIP (SLOT)  
36. 5P-7465 [2] CLIP (TAB)  
37. 5P-7468 [3] CLIP (SLOT)  
38. 5P-7469 [3] CLIP (TAB)  
39. 5P-8077 [4] FLANGE-HALF  
40. 5P-8444 [2] GROMMET (37-MM ID)  
41. 5P-9299 [1] CLIP (LOOP)  
42. 6V-1249 [2] GROMMET (22-MM ID)  
43. 6V-1874 C [1] GROMMET (31-MM ID)  
44. 6V-8398 [1] SEAL-O-RING  
45. 6V-8400 C [1] SEAL-O-RING  
46. 7X-2475 M [8] BOLT (M16X2X130-MM)  
47. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
48. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
50. 8T-4139 CM [12] BOLT (M12X1.75X30-MM)  
51. 8T-4140 M [4] BOLT (M16X2X60-MM)  
52. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
53. 8T-4173 M [8] BOLT (M16X2X110-MM)  
54. 8T-4183 M [5] BOLT (M12X1.75X40-MM)  
55. 8T-4193 M [8] BOLT (M16X2X50-MM)  
56. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
57. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
58. 8T-4196 CM [2] BOLT (M10X1.5X35-MM)  
59. 8T-4223 C [18] WASHER-HARD (13.5X25.5X3-MM THK)  
60. 8T-4244 M [3] NUT (M12X1.75-THD)  
61. 8T-4779 M [6] BOLT (M16X2X35-MM)  
62. 8T-4956 CM [2] BOLT (M12X1.75X35-MM)  
63. 8T-6385 M [4] BOLT (M16X2X180-MM)  
64. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
65. 212-7791 [1] TUBE AS  
66. 201-1005 [1] TUBE AS  
67. 198-6753 I [1] HOSE AS  
68. 154-8896 I [1] HOSE AS  
69. 201-1003 [1] TUBE AS  
70. 198-8871 [1] TUBE AS  
71. 212-7792 I [1] HOSE AS  
72. 231-7725 CI [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33780556
 

220-1643: CONTROL & LINES GP-RIDE

220-1643 CONTROL & LINES GP-RIDE
S/N BNH592-818
PART OF 220-6026 CONTROL AR-RIDE
i01767226 SEBP3378
2201643 CONTROL & LINES GP-RIDE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 [1] STRAP-CABLE  
2. 124-1718 [1] SLEEVE  
3. 130-5300 [2] CLIP  
4. 198-8871 [1] TUBE AS  
5. 199-3131 Y [1] VALVE GP-RIDE CONTROL  
6. 213-3436 [1] U-BOLT  
7. 219-7983 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
8. 220-1645 [1] TUBE AS  
9. 220-1646 [1] TUBE AS  
10. 220-1650 I [2] HOSE AS  
11. 220-1657 [1] BRACKET AS  
12. 220-1659 [1] BRACKET AS  
13. 220-5082 [1] BRACKET AS  
14. 220-6024 [1] BRACKET  
15. 221-0130 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
16. 221-0133 I [1] HOSE AS  
17. 221-0134 I [1] HOSE AS  
18. 221-0135 I [1] HOSE AS  
19. 221-0835 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
20. 221-0868 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
21. 221-5377 [1] HARNESS AS-WIRING  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
22. 103-1303 [4] CLAMP-HALF  
23. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
24. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
25. 148-8352 [2] ELBOW AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
26. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
27. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
28. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
29. 1P-3704 [1] SEAL-RECTANGULAR  
30. 1P-3705 [4] SEAL-RECTANGULAR  
31. 1P-3706 [2] SEAL-RECTANGULAR  
32. 1P-5767 [2] FLANGE-HALF  
33. 4J-0520 [1] SEAL-O-RING  
34. 5P-7464 [2] CLIP (SLOT)  
35. 5P-7465 [2] CLIP (TAB)  
36. 5P-7468 [3] CLIP (SLOT)  
37. 5P-7469 [3] CLIP (TAB)  
38. 5P-8077 [8] FLANGE-HALF  
39. 5P-8444 [2] GROMMET (37-MM ID)  
40. 5P-9085 [2] CLIP (LOOP)  
41. 5P-9299 [1] CLIP (LOOP)  
42. 6V-1249 [2] GROMMET (22-MM ID)  
43. 6V-8398 [1] SEAL-O-RING  
44. 7X-2553 M [10] BOLT (M16X2X40-MM)  
45. 8C-3206 [2] FLANGE-HALF  
46. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
48. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
49. 8T-4139 M [5] BOLT (M12X1.75X30-MM)  
50. 8T-4140 M [16] BOLT (M16X2X60-MM)  
51. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
52. 8T-4173 M [8] BOLT (M16X2X110-MM)  
53. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
54. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
55. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
56. 8T-4779 M [6] BOLT (M16X2X35-MM)  
57. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
58. 8T-7087 [1] GROMMET (34-MM ID)  
59. 9X-8257 [40] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33780557
 

220-1643: CONTROL & LINES GP-RIDE

220-1643 CONTROL & LINES GP-RIDE
S/N BNH819-1125
PART OF 220-6026 CONTROL AR-RIDE
i01941074 SEBP3378
2201643 CONTROL & LINES GP-RIDE Parts scheme 2201643 CONTROL & LINES GP-RIDE Parts scheme 2201643 CONTROL & LINES GP-RIDE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 [1] STRAP-CABLE  
2. 124-1718 [1] SLEEVE  
3. 130-5300 [2] CLIP  
4. 199-3131 Y [1] VALVE GP-RIDE CONTROL  
5. 219-7983 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
6. 220-1657 [1] BRACKET AS  
7. 220-1659 [1] BRACKET AS  
8. 221-0130 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
9. 221-5377 [1] HARNESS AS-WIRING  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
10. 228-7024 C [1] U-BOLT  
11. 230-4932 C [11] BRACKET AS  
12. 231-7717 C [1] ANGLE AS  
13. 231-7719 C [1] BRACKET  
14. 231-7722 C [1] CLAMP AS  
15. 231-7724 C [1] CLAMP AS  
16. 103-1303 [4] CLAMP-HALF  
17. 148-8333 C [1] CONNECTOR AS  
  6V-8400 C [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-7927 [1] CONNECTOR  
18. 148-8352 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
19. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
20. 148-8387 C [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
21. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
22. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
23. 164-4058 C [1] REDUCER AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8948 [1] REDUCER  
24. 1P-3704 [1] SEAL-RECTANGULAR  
25. 1P-3705 [4] SEAL-RECTANGULAR  
26. 1P-3706 [2] SEAL-RECTANGULAR  
27. 1P-5767 [2] FLANGE-HALF  
28. 4J-0520 [1] SEAL-O-RING  
29. 5P-7464 [2] CLIP (SLOT)  
30. 5P-7465 [2] CLIP (TAB)  
31. 5P-7468 [3] CLIP (SLOT)  
32. 5P-7469 [3] CLIP (TAB)  
33. 5P-8077 [8] FLANGE-HALF  
34. 5P-8444 [1] GROMMET (37-MM ID)  
35. 5P-9085 [2] CLIP (LOOP)  
36. 5P-9299 [1] CLIP (LOOP)  
37. 6V-1249 [2] GROMMET (22-MM ID)  
38. 6V-1874 C [1] GROMMET (31-MM ID)  
39. 6V-8398 [1] SEAL-O-RING  
40. 6V-8400 C [1] SEAL-O-RING  
41. 7X-2553 M [10] BOLT (M16X2X40-MM)  
42. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
43. 8C-3206 [2] FLANGE-HALF  
44. 8T-0389 CM [2] LOCKNUT (M10X1.5-THD)  
45. 8T-4121 C [15] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
47. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
48. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
49. 8T-4140 M [16] BOLT (M16X2X60-MM)  
50. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
51. 8T-4173 M [8] BOLT (M16X2X110-MM)  
52. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
53. 8T-4196 CM [8] BOLT (M10X1.5X35-MM)  
54. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4779 M [6] BOLT (M16X2X35-MM)  
56. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
57. 8T-7087 [1] GROMMET (34-MM ID)  
58. 9X-8257 [40] WASHER (17.5X30X3.5-MM THK)  
59. 198-8871 [1] TUBE AS  
60. 220-1645 [1] TUBE AS  
61. 220-1646 [1] TUBE AS  
62. 220-1650 I [2] HOSE AS  
63. 231-7726 CI [1] HOSE AS  
64. 221-0134 I [1] HOSE AS  
65. 221-0135 I [1] HOSE AS  
66. 231-7727 C [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33780558
 

220-1643: CONTROL & LINES GP-RIDE

220-1643 CONTROL & LINES GP-RIDE
S/N BNH1126-UP
PART OF 220-6026 CONTROL AR-RIDE
i02126122 SEBP3378
2201643 CONTROL & LINES GP-RIDE Parts scheme 2201643 CONTROL & LINES GP-RIDE Parts scheme 2201643 CONTROL & LINES GP-RIDE Parts scheme
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 [1] STRAP-CABLE  
2. 124-1718 [1] SLEEVE  
3. 130-5300 [2] CLIP  
4. 199-3131 Y [1] VALVE GP-RIDE CONTROL  
5. 219-7983 Y [1] ACCUMULATOR GP-RIDE CONTROL (CHARGED)  
6. 220-1657 [1] BRACKET AS  
7. 220-1659 [1] BRACKET AS  
8. 221-0130 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
9. 221-5377 [1] HARNESS AS-WIRING  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
10. 228-7024 [1] U-BOLT  
11. 230-4932 [11] BRACKET AS  
12. 231-7717 [1] ANGLE AS  
13. 231-7719 [1] BRACKET  
14. 231-7722 [1] CLAMP AS  
15. 231-7724 [1] CLAMP AS  
16. 103-1303 [4] CLAMP-HALF  
17. 148-8333 [1] CONNECTOR AS  
  6V-8400 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-7927 [1] CONNECTOR  
18. 148-8352 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
19. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
20. 148-8387 [1] ELBOW AS  
  6V-8400 [1] SEAL-O-RING  
  6V-9855 [1] ELBOW  
21. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
22. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
23. 164-4058 [1] REDUCER AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8948 [1] REDUCER  
24. 1P-3704 [1] SEAL-RECTANGULAR  
25. 1P-3705 [4] SEAL-RECTANGULAR  
26. 1P-3706 [2] SEAL-RECTANGULAR  
27. 1P-5767 [2] FLANGE-HALF  
28. 4J-0520 [1] SEAL-O-RING  
29. 5P-7464 [2] CLIP (SLOT)  
30. 5P-7465 [2] CLIP (TAB)  
31. 5P-7468 [3] CLIP (SLOT)  
32. 5P-7469 [3] CLIP (TAB)  
33. 5P-8077 [8] FLANGE-HALF  
34. 5P-8444 [1] GROMMET (37-MM ID)  
35. 5P-9085 [2] CLIP (LOOP)  
36. 5P-9299 [1] CLIP (LOOP)  
37. 6V-1249 [2] GROMMET (22-MM ID)  
38. 6V-1874 [1] GROMMET (31-MM ID)  
39. 6V-8398 [1] SEAL-O-RING  
40. 6V-8400 [1] SEAL-O-RING  
41. 7X-2553 CM [6] BOLT (M16X2X40-MM)  
42. 7X-7729 [2] WASHER (11X25X3-MM THK)  
43. 8C-3206 [2] FLANGE-HALF  
44. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
45. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
47. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
48. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
49. 8T-4140 M [19] BOLT (M16X2X60-MM)  
50. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
51. 8T-4173 M [8] BOLT (M16X2X110-MM)  
52. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
53. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
54. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4779 M [6] BOLT (M16X2X35-MM)  
56. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
57. 8T-7087 [1] GROMMET (34-MM ID)  
58. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
59. 198-8871 [1] TUBE AS  
60. 220-1645 [1] TUBE AS  
61. 220-1646 [1] TUBE AS  
62. 220-1650 I [2] HOSE AS  
63. 231-7726 I [1] HOSE AS  
64. 221-0134 I [1] HOSE AS  
65. 221-0135 I [1] HOSE AS  
66. 231-7727 [1] TUBE AS  
67. 246-0561 [1] PLATE  
68. 7X-0515 [6] WASHER-HARD (17X35X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP33780559
 

155-6034: CONTROL AR-RIDE

155-6034 CONTROL AR-RIDE
S/N BNH1-UP
i01972513 SEBP3378
  For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  197-7356 Y [1] CONTROL & LINES GP-RIDE  
    -OR-
  220-5571 Y [1] HYDRAULIC AR-RIDE CONTROL  
  208-0546 Y [1] SWITCH GP-RIDE CONTROL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 988G :

ACCUMULATOR GP-RIDE CONTROL
219-7987 ACCUMULATOR GP-RIDE CONTROL
ACCUMULATOR GP-RIDE CONTROL
219-7983 ACCUMULATOR GP-RIDE CONTROL
ACCUMULATOR GP-RIDE CONTROL
185-7398 ACCUMULATOR GP-RIDE CONTROL
ACCUMULATOR GP-RIDE CONTROL
185-7398 ACCUMULATOR GP-RIDE CONTROL
ACCUMULATOR GP-RIDE CONTROL
176-3847 ACCUMULATOR GP-RIDE CONTROL
VALVE GP-CHECK
4T-2698 VALVE GP-CHECK
VALVE GP-BRAKE CONTROL
106-1774 VALVE GP-BRAKE CONTROL
VALVE & MTG GP-BRAKE CONTROL
326-7291 VALVE & MTG GP-BRAKE CONTROL
ACTUATOR GP-PILOT CONTROL
217-6719 ACTUATOR GP-PILOT CONTROL
ACTUATOR GP-PILOT CONTROL
217-6720 ACTUATOR GP-PILOT CONTROL
CONTROL & LINES GP-RIDE
197-7356 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
197-7356 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
197-7356 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
220-1643 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
220-1643 CONTROL & LINES GP-RIDE
CONTROL & LINES GP-RIDE
220-1643 CONTROL & LINES GP-RIDE

Truck sale:

Caterpillar 988G
 
Caterpillar 988G
- Wheel Loaders
FINANZAUTO S.A.
 
69,000 
Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
FABICK CAT
Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
 
Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.
Caterpillar 988G/H, bucket, Construction
 
Caterpillar 988G/H, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.
Caterpillar 988G, Wheel Loaders, Construction
72,000 
Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.