AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-0384 HINGE GP-ROADING FENDER -LH S/N AXG1-UP PART OF 132-7864 FENDER GP-ROADING 980G II WHEEL LOADER


FRAME AND BODY
FENDER GP
HITCH GP
HOOD GP
LADDER GP
LINES GP

WHEEL LOADER 980G II WHEEL LOADER AXG
 980G II Wheel Loader AXG00001-UP (MACHINE) POWERED BY 3406E Engine SEBP3408 980G II AXG   (1999)

FRAME AND BODY

FENDER GP
186-2353 FENDER AR-ROADING
4Q-4455 FENDER AR-ROADING
FENDER GP
110-8136 FENDER GP
FENDER GP
219-6230 FENDER GP
FENDER GP-FRONT
161-8204 FENDER GP-FRONT
FENDER GP-REAR
115-9656 FENDER GP-REAR
FENDER GP-ROADING
132-7864 FENDER GP-ROADING
HINGE GP-ROADING FENDER
131-0384 HINGE GP-ROADING FENDER
HINGE GP-ROADING FENDER
131-0385 HINGE GP-ROADING FENDER
 

#SEBP34080460
 

131-0384: HINGE GP-ROADING FENDER

131-0384 HINGE GP-ROADING FENDER -LH
S/N AXG1-UP
PART OF 132-7864 FENDER GP-ROADING
i00585379 SEBP3408
1310384 HINGE GP-ROADING FENDER Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4605 [1] PIN-COTTER  
2. 3B-4629 [1] PIN-COTTER  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 4M-7470 [2] GROMMET  
5. 122-0630 [1] ROD AS  
6. 131-0386 [1] CHANNEL AS  
7. 131-0391 [1] HINGE AS  
8. 122-0631 [1] PIN  
9. 4B-4278 [1] WASHER (10.2X20.5X1.6-MM THK)  
 

#SEBP34080461
 

131-0385: HINGE GP-ROADING FENDER

131-0385 HINGE GP-ROADING FENDER -RH
S/N AXG1-UP
PART OF 132-7864 FENDER GP-ROADING
i00585380 SEBP3408
1310385 HINGE GP-ROADING FENDER Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4605 [1] PIN-COTTER  
2. 3B-4629 [1] PIN-COTTER  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 4M-7470 [2] GROMMET  
5. 122-0630 [1] ROD AS  
6. 131-0388 [1] CHANNEL AS  
7. 131-0391 [1] HINGE AS  
8. 122-0631 [1] PIN  
9. 4B-4278 [1] WASHER (10.2X20.5X1.6-MM THK)  
 

#SEBP34080462
 

110-8050: HITCH GP-ARTICULATING

110-8050 HITCH GP-ARTICULATING
S/N AXG1-UP
PART OF 171-3024 CHASSIS AR
i00190732 SEBP3408
1108050 HITCH GP-ARTICULATING Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-8839 [1] SPACER (13.5X57X6-MM THK)  
2. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
3. 115-2955 [1] PIN AS  
4. 4V-1901 [2] BUSHING  
5. 7X-2549 M [6] BOLT (M12X1.75X100-MM)  
6. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 1V-8852 [1] CAP  
8. 1V-8848 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
9. 115-3183 [1] CAP  
10. 7D-8637 [2] CUP-BEARING  
11. 7D-8636 [2] CONE-BEARING  
12. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
13. 115-2958 [1] PIN-LOWER  
14. 8T-5092 M [10] BOLT (M12X1.75X150-MM)  
15. 5K-3501 [1] CAP-UPPER  
16. 5K-3492 B [1] SHIM PACK (INCLUDES 19-SHIMS)  
17. 115-3184 [1] CAP-LOWER  
18. 5K-3489 B [1] SHIM PACK (INCLUDES 18-SHIMS)  
19. 131-6096 [1] PLATE-LOCK  
20. 173-9779 M [2] BOLT (M24X3X80-MM)  
21. 6V-8237 [2] WASHER (26X44X4-MM THK)  
22. 125-2207 M [8] BOLT (M12X1.75X40-MM)  
23. 3K-6454 [2] SEAL-LIP TYPE (REAR FRAME)  
24. 5K-3491 [1] SPACER-SPECIAL  
25. 1J-2860 [2] CUP-BEARING  
26. 1J-4757 [2] CONE-BEARING  
27. 5K-3490 [1] SPACER  
28. 6H-3999 [2] SEAL-LIP TYPE (FRONT FRAME)  
29. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP34080463
 

179-7211: HOOD & GUARD GP

179-7211 HOOD & GUARD GP
S/N AXG1-972; AXG1073-UP
PART OF 171-3024 CHASSIS AR, 214-9391 CONVERSION AR-MACHINE, 175-4222 SUPPRESSION AR-SOUND
i01450757 SEBP3408
1797211 HOOD & GUARD GP Parts scheme 1797211 HOOD & GUARD GP Parts scheme 1797211 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7470 [6] GROMMET  
2. 5P-0372 [1] LOCK PIN  
3. 6V-7636 [2] PIN AS-SPRING  
4. 6V-8073 [1] LINK-CONNECTING  
5. 8T-4766 [1] ROD END  
6. 113-7879 [1] DOOR AS-ACCESS (LH)  
  6V-4604 [1] RIVET-POP  
  8T-2895 J [1] LOCK GP-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
  9V-1777 [1] CABLE  
  9V-1820 [1] SPACER  
  118-9587 [1] CAM-LATCH  
  119-0281 [3] HINGE AS  
  174-6381 [1] LATCH AS  
7. 115-4943 [1] PANEL AS  
8. 115-5024 [1] PIPE AS-EXHAUST EXTENSION  
9. 124-0724 [1] BRACKET  
10. 124-0725 [1] BRACKET  
11. 124-0759 [1] BRACKET AS  
12. 125-7037 [1] INSERT  
13. 131-1586 [2] ROD AS  
14. 139-9196 [1] DOOR AS-ACCESS (RH)  
  6V-4604 [1] RIVET-POP  
  8T-2895 J [1] LOCK GP-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
  9V-1777 [1] CABLE  
  9V-1820 [1] SPACER  
  118-9587 [1] CAM-LATCH  
  119-0281 [3] HINGE AS  
  174-6381 [1] LATCH AS  
15. 173-8403 [1] GUARD AS  
  8T-3490 M [20] NUT-WELD (M10X1.5-THD)  
  8T-4967 M [12] STUD-WELD (M10X1.5X23-MM)  
  115-4968 [4] BUSHING  
  124-3019 [4] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 173-9681 [1] GRILL AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  174-3085 [3] HINGE AS  
17. 174-3086 [1] PIN AS  
18. 176-2468 [1] HANDLE AS-PANEL  
19. 177-0333 [1] LATCH AS  
20. 179-7212 [1] HOOD GP  
  124-6568 [1] INSULATION  
  124-6569 [14] FASTENER  
21. 179-7213 [1] PANEL AS (RH)  
  124-6567 [1] INSULATION  
  124-6569 [7] FASTENER  
  124-6570 [7] WASHER (5.8X24.6X3.2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  9X-2616 M [1] SCREW-SOCKET (M8X1.25X16-MM)  
  145-0060 E SEAL (126CM)  
22. 179-7214 [1] PANEL AS (LH)  
  124-6566 [1] INSULATION  
  124-6569 [7] FASTENER  
  124-6570 [7] WASHER (5.8X24.6X3.2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  9X-2616 M [1] SCREW-SOCKET (M8X1.25X16-MM)  
  145-0060 E SEAL (126CM)  
23. 185-9787 [1] BRACKET AS  
24. 096-3781 [1] PIN-CLEVIS  
25. 131-5879 [6] WASHER (11X32X3-MM THK)  
26. 1H-3338 [8] LOCKWASHER  
27. 3B-4611 [2] PIN-COTTER  
28. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
29. 7X-7729 [78] WASHER (11X25X3-MM THK)  
30. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [36] NUT (M10X1.5-THD)  
32. 8T-4136 M [44] BOLT (M10X1.5X25-MM)  
33. 8T-4195 M [14] BOLT (M10X1.5X30-MM)  
34. 9K-4939 [3] BUMPER-STEM  
35. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
36. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
37. 9X-2616 M [2] SCREW-SOCKET (M8X1.25X16-MM)  
38. 6R-2386 E [2] SEAL (250CM LH AND 250CM RH)  
39. 126-8472 E [2] SEAL (15CM EACH)  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

#SEBP34080464
 

179-7211: HOOD & GUARD GP

179-7211 HOOD & GUARD GP
S/N AXG1357-UP
PART OF 171-3024 CHASSIS AR
i02224542 SEBP3408
1797211 HOOD & GUARD GP Parts scheme 1797211 HOOD & GUARD GP Parts scheme 1797211 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7470 [6] GROMMET  
2. 5P-0372 [1] LOCK PIN  
3. 6V-7636 [2] PIN AS-SPRING  
4. 6V-8073 [1] LINK-CONNECTING  
5. 8T-4766 [1] ROD END  
6. 113-7879 [1] DOOR AS-ACCESS (LH)  
  6V-4604 [1] RIVET-POP  
  8T-2895 J [1] LOCK GP-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
  9V-1777 [1] CABLE  
  9V-1820 [1] SPACER  
  118-9587 [1] CAM-LATCH  
  119-0281 [3] HINGE AS  
  174-6381 [1] LATCH AS  
7. 115-4943 [1] PANEL AS  
8. 115-5024 [1] PIPE AS-EXHAUST EXTENSION  
9. 124-0724 [1] BRACKET  
10. 124-0725 [1] BRACKET  
11. 124-0759 [1] BRACKET AS  
12. 125-7037 [1] INSERT  
13. 131-1586 [2] ROD AS  
14. 139-9196 [1] DOOR AS-ACCESS (RH)  
  6V-4604 [1] RIVET-POP  
  8T-2895 J [1] LOCK GP-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
  9V-1777 [1] CABLE  
  9V-1820 [1] SPACER  
  118-9587 [1] CAM-LATCH  
  119-0281 [3] HINGE AS  
  174-6381 [1] LATCH AS  
15. 240-1925 C [1] GUARD AS  
  8T-3490 M [20] NUT-WELD (M10X1.5-THD)  
  8T-4967 M [12] STUD-WELD (M10X1.5X23-MM)  
  115-4968 [4] BUSHING  
  124-3019 [4] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 173-9681 [1] GRILL AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  174-3085 [3] HINGE AS  
17. 174-3086 [1] PIN AS  
18. 176-2468 [1] HANDLE AS-PANEL  
19. 177-0333 [1] LATCH AS  
20. 179-7212 [1] HOOD GP  
  124-6568 [1] INSULATION  
  124-6569 [14] FASTENER  
21. 240-1921 C [1] PANEL AS (RH)  
  124-6567 [1] INSULATION  
  124-6569 [7] FASTENER  
  124-6570 [7] WASHER (5.8X24.6X3.2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  9X-2616 M [1] SCREW-SOCKET (M8X1.25X16-MM)  
  145-0060 E SEAL (126-CM)  
22. 240-1922 C [1] PANEL AS (LH)  
  124-6566 [1] INSULATION  
  124-6569 [7] FASTENER  
  124-6570 [7] WASHER (5.8X24.6X3.2-MM THK)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  145-0060 E SEAL (126-CM)  
23. 185-9787 [1] BRACKET AS  
24. 096-3781 [1] PIN-CLEVIS  
25. 131-5879 [6] WASHER (11X32X3-MM THK)  
26. 1H-3338 [8] LOCKWASHER  
27. 3B-4611 [2] PIN-COTTER  
28. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
29. 7X-7729 [78] WASHER (11X25X3-MM THK)  
30. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [36] NUT (M10X1.5-THD)  
32. 8T-4136 M [44] BOLT (M10X1.5X25-MM)  
33. 8T-4195 M [14] BOLT (M10X1.5X30-MM)  
34. 9K-4939 [3] BUMPER-STEM  
35. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
36. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
37. 9X-2616 M [2] SCREW-SOCKET (M8X1.25X16-MM)  
38. 6R-2386 E [2] SEAL (250CM LH AND 250CM RH)  
39. 126-8472 E [2] SEAL (15CM EACH)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

#SEBP34080465
 

234-0716: HOOD & GUARD GP

234-0716 HOOD & GUARD GP
S/N AXG1-1072
PART OF 171-3024 CHASSIS AR
i01979244 SEBP3408
2340716 HOOD & GUARD GP Parts scheme 2340716 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7470 [6] GROMMET  
2. 113-7879 [1] DOOR AS-ACCESS (LH)  
  8T-2895 [1] LOCK GP-CYLINDER  
  226-0291 [1] LOCK AS  
  226-0323 [1] CAM-LOCK  
  174-6381 [1] LATCH AS  
  6V-4604 [1] RIVET-POP  
  9V-1777 [1] CABLE  
  9V-1820 [1] SPACER  
  118-9587 [1] CAM-LATCH  
  119-0281 [3] HINGE AS  
3. 115-4943 [1] PANEL AS  
4. 115-5024 [1] PIPE AS-EXHAUST EXTENSION  
5. 124-0724 [1] BRACKET  
6. 124-0725 [1] BRACKET  
7. 124-0759 [1] BRACKET AS  
8. 125-7037 [1] INSERT  
9. 131-1586 [2] ROD AS  
    (EACH INCLUDES)
  6V-5839 [2] WASHER (11X21X2.5-MM THK)  
10. 139-9196 [1] DOOR AS-ACCESS (RH)  
  8T-2895 [1] LOCK GP-CYLINDER  
  226-0291 [1] LOCK AS  
  226-0323 [1] CAM-LOCK  
  6V-4604 [1] RIVET-POP  
  9V-1777 [1] CABLE  
  9V-1820 [1] SPACER  
  118-9587 [1] CAM-LATCH  
  119-0281 [3] HINGE AS  
  174-6381 [1] LATCH AS  
11. 173-8403 [1] GUARD AS  
  8T-3490 M [20] NUT-WELD (M10X1.5-THD)  
  8T-4967 M [12] STUD-WELD (M10X1.5X23-MM)  
  115-4968 [4] BUSHING  
  124-3019 [4] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 179-7212 [1] HOOD GP  
  176-0001 [1] HOOD AS  
  124-6568 [1] INSULATION  
  124-6569 [14] FASTENER  
13. 179-7213 [1] PANEL AS (RH)  
  176-0002 [1] PANEL AS (RH)  
  124-6570 [7] WASHER (5.8X24.6X3.2-MM THK)  
  124-6569 [7] FASTENER  
  124-6567 [1] INSULATION  
14. 179-7214 [1] PANEL AS (LH)  
  176-0003 [1] PANEL AS (LH)  
  124-6566 [1] INSULATION  
  124-6569 [7] FASTENER  
  124-6570 [7] WASHER (5.8X24.6X3.2-MM THK)  
15. 229-8611 Y [1] GRILL GP-RADIATOR  
16. 131-5879 [6] WASHER (11X32X3-MM THK)  
17. 3B-4611 [2] PIN-COTTER  
18. 7X-7729 [7] WASHER (11X25X3-MM THK)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4133 M [36] NUT (M10X1.5-THD)  
21. 8T-4136 M [43] BOLT (M10X1.5X25-MM)  
22. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
23. 9X-2616 M [2] SCREW-SOCKET (M8X1.25X16-MM)  
24. 6R-2386 E SEAL (500-CM)  
25. 126-8472 E SEAL (30-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34080466
 

255-7505: LADDER GP

255-7505 LADDER GP
S/N AXG1-UP
Type 1
i02223316 SEBP3408
2557505 LADDER GP Parts scheme 2557505 LADDER GP Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8106 [8] SPACER (11.13X19.05X15-MM THK)  
2. 175-3200 I [1] HOSE AS  
3. 132-3421 [1] BUMPER  
4. 149-2847 [1] FITTING  
5. 234-1530 [1] STEP AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
6. 234-3545 [4] PLATE  
7. 254-4151 [2] ROLLER  
8. 254-4152 [1] CYLINDER  
9. 254-4153 [1] SPRING-GAS  
10. 254-4154 [2] PLATE  
11. 254-4171 [1] PIN  
12. 254-4187 [2] PIN  
13. 254-4189 [2] BLOCK  
14. 254-4190 [2] PLATE  
15. 254-5254 [2] HOUSING  
16. 254-5255 [2] BEARING  
17. 254-5257 [1] ELBOW  
18. 254-5258 [1] BREATHER  
19. 254-8471 [1] PLATE  
20. 255-7494 [1] PLATE  
21. 255-7496 [1] BRACKET AS  
22. 255-7499 [1] ARM AS  
23. 255-7503 [1] LADDER AS  
24. 257-2259 [1] COVER AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
26. 259-9765 [1] PLATFORM AS (LH)  
  8T-3490 M [15] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [3] NUT-WELD (M12X1.75-THD)  
  170-7491 M [2] STUD-WELD (M10X1.5X35-MM)  
27. 260-4586 [1] SPACER  
28. 095-0917 [1] RING-RETAINING  
29. 148-8434 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9843 [1] TEE  
30. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
31. 156-3722 [1] COUPLING AS  
32. 3J-1907 [1] SEAL-O-RING  
33. 3V-4791 [1] GROMMET  
34. 4J-5477 [1] SEAL-O-RING  
35. 5C-7261 M [1] NUT (M8X1.25-THD)  
36. 5C-9553 M [6] BOLT (M6X1X16-MM)  
37. 5L-4035 [4] RING-RETAINING (EXTERNAL)  
38. 6D-3479 [3] CLIP (LOOP)  
39. 6V-8641 [1] CONNECTOR  
40. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
41. 7E-5639 [1] SPACER (13.88X21.34X25-MM THK)  
42. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
43. 7X-7729 [4] WASHER (11X25X3-MM THK)  
44. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4133 M [5] NUT (M10X1.5-THD)  
46. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
47. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
48. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
49. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
50. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
52. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
53. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
54. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
55. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
56. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
57. 255-7504 [2] SUPPORT-STEP (RUBBER)  
58. 153-6223 [1] PLUG-DUST  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34080467
 

255-7505: LADDER GP

255-7505 LADDER GP
S/N AXG1-UP
Type 2
i02345010 SEBP3408
2557505 LADDER GP Parts scheme 2557505 LADDER GP Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8106 [8] SPACER (11.13X19.05X15-MM THK)  
2. 175-3200 I [1] HOSE AS  
3. 132-3421 [1] BUMPER  
4. 149-2847 [1] FITTING  
5. 234-1530 [1] STEP AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
6. 234-3545 [4] PLATE  
7. 254-4151 [2] ROLLER  
8. 254-4152 [1] CYLINDER  
9. 254-4153 [1] SPRING-GAS  
10. 254-4154 [2] PLATE  
11. 254-4171 [1] PIN  
12. 254-4187 [2] PIN  
13. 254-4189 [2] BLOCK  
14. 254-4190 [2] PLATE  
15. 254-5254 [2] HOUSING  
16. 254-5255 [2] BEARING  
17. 254-5257 [1] ELBOW  
18. 254-5258 [1] BREATHER  
19. 254-8471 [1] PLATE  
20. 255-7494 [1] PLATE  
21. 255-7496 [1] BRACKET AS  
22. 255-7499 [1] ARM AS  
23. 255-7503 [1] LADDER AS  
24. 257-2259 [1] COVER AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
25. 259-8881 [1] PLATE  
26. 259-9765 [1] PLATFORM AS (LH)  
  8T-3490 M [15] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [3] NUT-WELD (M12X1.75-THD)  
  170-7491 M [2] STUD-WELD (M10X1.5X35-MM)  
27. 260-4586 [1] SPACER  
28. 095-0917 [1] RING-RETAINING  
29. 148-8434 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9843 [1] TEE  
30. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
31. 156-3722 [1] COUPLING AS  
32. 3J-1907 [1] SEAL-O-RING  
33. 3V-4791 [1] GROMMET  
34. 4J-5477 [1] SEAL-O-RING  
35. 5C-7261 M [1] NUT (M8X1.25-THD)  
36. 5C-9553 M [6] BOLT (M6X1X16-MM)  
37. 5L-4035 [4] RING-RETAINING (EXTERNAL)  
38. 6D-3479 [3] CLIP (LOOP)  
39. 6V-8641 [1] CONNECTOR  
40. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
41. 7E-5639 [1] SPACER (13.88X21.34X25-MM THK)  
42. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
43. 7X-7729 [4] WASHER (11X25X3-MM THK)  
44. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4133 M [5] NUT (M10X1.5-THD)  
46. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
47. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
48. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
49. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
50. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
52. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
53. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
54. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
55. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
56. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
57. 255-7504 [2] SUPPORT-STEP (RUBBER)  
58. 259-4506 [1] FILM-WARNING (CRUSH HAZARD)  
59. 153-6223 [1] PLUG-DUST  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34080468
 

255-7505: LADDER GP

255-7505 LADDER GP
S/N AXG1-UP
Type 3
i03126379 SEBP3408
2557505 LADDER GP Parts scheme 2557505 LADDER GP Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8106 [8] SPACER (11.13X19.05X15-MM THK)  
2. 116-9894 I [1] HOSE AS  
3. 132-3421 [1] BUMPER  
4. 149-2847 [1] FITTING  
5. 153-6223 [1] PLUG-DUST  
6. 234-1530 [1] STEP AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 234-3545 [4] PLATE  
8. 244-1542 C [1] PLUG-ORIFICE  
9. 254-4151 [2] ROLLER  
10. 254-4152 [1] CYLINDER  
11. 254-4154 [2] PLATE  
12. 254-4171 [1] PIN  
13. 254-4187 [2] PIN  
14. 254-4189 C [1] BLOCK  
15. 254-4190 C [1] PLATE  
16. 254-5254 [2] HOUSING  
17. 254-5255 [2] BEARING  
18. 254-5257 [1] ELBOW  
19. 254-5258 [1] BREATHER  
20. 255-7494 [1] PLATE  
21. 255-7496 [1] BRACKET AS  
22. 257-2259 [1] COVER AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
23. 259-4506 [1] FILM-WARNING (CRUSH HAZARD)  
24. 259-8881 [1] PLATE  
25. 259-9765 [1] PLATFORM AS (LH)  
  8T-3490 M [15] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [3] NUT-WELD (M12X1.75-THD)  
  170-7491 M [2] STUD-WELD (M10X1.5X35-MM)  
26. 260-4586 [1] SPACER  
27. 283-2174 C [1] HOOK  
28. 283-2175 C [1] PLATE  
29. 302-6795 C [1] COVER  
30. 303-2112 C [1] SPRING-GAS  
31. 306-2269 C [1] ARM AS  
32. 306-7986 C [1] LADDER AS  
33. 095-0917 [1] RING-RETAINING  
34. 143-7685 C [1] ADAPTER-SPECIAL  
35. 148-8434 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9843 [1] TEE  
36. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
37. 156-3722 [1] COUPLING AS  
38. 3J-1907 [1] SEAL-O-RING  
39. 3V-4791 [1] GROMMET  
40. 4J-5477 [1] SEAL-O-RING  
41. 5C-9553 CM [4] BOLT (M6X1X16-MM)  
42. 5L-4035 C [2] RING-RETAINING (EXTERNAL)  
43. 5P-4116 C [1] WASHER-HARD (8.8X20.5X2-MM THK)  
44. 6D-3479 [3] CLIP (LOOP)  
45. 6V-7687 CM [1] LOCKNUT (M12X1.75-THD)  
46. 7E-5639 [1] SPACER (13.88X21.34X25-MM THK)  
47. 7X-7729 [4] WASHER (11X25X3-MM THK)  
48. 8T-4121 C [19] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [5] NUT (M10X1.5-THD)  
50. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
51. 8T-4171 CM [2] BOLT (M6X1X12-MM)  
52. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
53. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
54. 8T-4191 CM [2] BOLT (M10X1.5X16-MM)  
55. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
56. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
57. 8T-4200 CM [2] BOLT (M8X1.25X16-MM)  
58. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
59. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
60. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
61. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
62. 255-7504 [2] SUPPORT-STEP (RUBBER)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34080469
 

265-5579: LINES GP-AUTOMATIC LUBRICATION

265-5579 LINES GP-AUTOMATIC LUBRICATION
S/N AXG1-UP
PART OF 265-5577 LUBRICATION AR-AUTOMATIC
i02326112 SEBP3408
2655579 LINES GP-AUTOMATIC LUBRICATION Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [14] STRAP-CABLE  
2. 177-3433 [2] HOSE AS  
3. 192-6168 [2] HOSE AS  
4. 8T-1885 [18] CLIP (SLOT)  
5. 8T-1886 [18] CLIP (TAB)  
6. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 980G II :

HANDRAIL GP
257-7611 HANDRAIL GP
HANDRAIL & STEP GP
239-4423 HANDRAIL & STEP GP
HANDRAIL & STEP GP
110-8119 HANDRAIL & STEP GP
GUARD GP-POWER TRAIN
175-4196 GUARD GP-POWER TRAIN
GUARD GP-LINES
206-2759 GUARD GP-LINES
GUARD GP-FRONT
210-1759 GUARD GP-FRONT
GUARD GP-CRANKCASE
206-2758 GUARD GP-CRANKCASE
GUARD GP-CRANKCASE
175-4201 GUARD GP-CRANKCASE
HINGE GP-ROADING FENDER
131-0385 HINGE GP-ROADING FENDER
HITCH GP-ARTICULATING
110-8050 HITCH GP-ARTICULATING
HOOD & GUARD GP
179-7211 HOOD & GUARD GP
HOOD & GUARD GP
179-7211 HOOD & GUARD GP
HOOD & GUARD GP
234-0716 HOOD & GUARD GP
LADDER GP
255-7505 LADDER GP
LADDER GP
255-7505 LADDER GP
LADDER GP
255-7505 LADDER GP

Truck sale:

Caterpillar 980G II
 
Caterpillar 980G II
- Wheel Loaders
FINNING CANADA
Caterpillar 980GII, Wheel Loaders, Construction
57,675 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980G II, Wheel Loaders, Construction
53,500 
Caterpillar 980G II, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
54,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
49,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.