212-3657 PUMP GP-FUEL PRM & WATER SEP -PRIMARY FILTER-ELECTRIC S/N TX61-UP; BMA1-UP PART OF 185-2069 PUMP GP-FUEL PRM & PRIM FILTER 950G II

FUEL SYSTEM

FILTER GP-FUEL

0. 212-3657 PUMP GP-FU

PUMP GP-FUEL INJECTION

1. 178-0198 PUMP GP-UN
2. 180-7341 PUMP GP-UN
3. 180-7341 PUMP GP-UN
4. 210-5575 PUMP GP-UN
5. 210-5575 PUMP GP-UN

LINES GP-FUEL

6. 232-0343 REGULATOR

TANK GP-FUEL

7. 112-6978 TANK GP-FU
8. 2Q-8209 TANK GP-FU

VALVE GP-SOLENOID

9. 122-5053 VALVE GP-S
0. INFORMATION

WHEEL LOADER 950G II WHEEL LOADER BAA
950G II WHEEL LOADER BAA00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3492 950G II BAA (1999)

FUEL SYSTEM

FILTER GP-FUEL

174-9570 FILTER GP-WATER SEP & FUEL

187-6277 LINES GP-FUEL FILTER

237-2263 LINES GP-FUEL FILTER

185-2069 PUMP GP-FUEL PRM & PRIM FILTER

212-3657 PUMP GP-FUEL PRM & WATER SEP

#SEBP34920130

212-3657: PUMP GP-FUEL PRM & WATER SEP

PUMP GP-FUEL PRM & WATER SEP

212-3657 PUMP GP-FUEL PRM & WATER SEP -PRIMARY FILTER-ELECTRIC
S/N TX61-UP; BMA1-UP
PART OF 185-2069 PUMP GP-FUEL PRM & PRIM FILTER

i02259296 SEBP3492

2123657 PUMP GP-FUEL PRM & WATER SEP Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-9570 Y	[1]	FILTER GP-WATER SEP & FUEL
2.	217-8339	[1]	PUMP GP-FUEL PRIMING (24-VOLT)
	Y		SEPARATE ILLUSTRATION

#SEBP34920131

178-0198: PUMP GP-UNIT INJECTION

PUMP GP-UNIT INJECTION

178-0198 PUMP GP-UNIT INJECTION
S/N TX61-UP; BMA1-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE

i01615416 SEBP3492

1780198 PUMP GP-UNIT INJECTION Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-0199 Y	[1]	INJECTOR GP-FUEL
2.	199-6103	[1]	BOLT-SPECIAL
3.	159-0288	[1]	DEFLECTOR
4.	8T-2396 M	[1]	BOLT (M6X1X60-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34920132

180-7341: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

180-7341 PUMP GP-UNIT INJECTOR HYD
S/N BMA1-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD

i01615216 SEBP3492

1807341 PUMP GP-UNIT INJECTOR HYD Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-5053 Y	[1]	VALVE GP-SOLENOID (INJECTION ACTUATION)
2.	128-3473	[1]	GEAR-PUMP DRIVE (36-TEETH)
3.	162-9610	[1]	PUMP GP-FUEL INJECTION
4.	162-9612	[1]	PUMP GP-FUEL TRANSFER
5.	179-7004	[1]	ADAPTER AS
	153-4906	[1]	SEAL-O-RING
6.	4P-5918	[1]	CLIP
7.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
9.	118-0275	[1]	WASHER (13.5X32X8-MM THK)
10.	131-1845	[1]	PLUG-HEX SOCKET
12.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)

	144-7339 F	[1]	SEAL-O-RING (FUEL TRANSFER PUMP)
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34920133

180-7341: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

180-7341 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; BMA1-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD

i02203952 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-5053 Y	[1]	VALVE GP-SOLENOID (INJECTION ACTUATION)
2.	128-3473	[1]	GEAR-PUMP DRIVE (36-TEETH)
3.	162-9610	[1]	PUMP GP-FUEL INJECTION
4.	162-9612	[1]	PUMP GP-FUEL TRANSFER
5.	250-1424 C	[1]	ELBOW AS
	6V-8724	[1]	ELBOW
	214-7568	[1]	SEAL-O-RING
	221-3494	[1]	SEAL-O-RING
6.	4P-5918	[1]	CLIP
7.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
9.	118-0275	[1]	WASHER (13.5X32X8-MM THK)
10.	131-1845	[1]	PLUG-HEX SOCKET
12.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)

	144-7339 F	[1]	SEAL-O-RING (FUEL TRANSFER PUMP)
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34920134

210-5575: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

210-5575 PUMP GP-UNIT INJECTOR HYD
S/N BMA1-UP
PART OF 172-4043 ENGINE AR-CORE

i01615472 SEBP3492

2105575 PUMP GP-UNIT INJECTOR HYD Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-7341 Y	[1]	PUMP GP-UNIT INJECTOR HYD
2.	185-3241	[1]	SEAL-O-RING
3.	3J-1907	[1]	SEAL-O-RING
4.	6V-5219 M	[1]	BOLT (M8X1.25X40-MM)
5.	6V-9804 M	[2]	BOLT (M8X1.25X75-MM)
6.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
7.	9S-4191	[1]	PLUG (9/16-18-THD)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34920135

210-5575: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

210-5575 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; BMA1-UP
PART OF 172-4043, 456-5060 ENGINE AR-CORE

i05888643 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-7341 Y	[1]	PUMP GP-UNIT INJECTOR HYD
2.	185-3241	[1]	SEAL-O-RING
3.	389-3708 C	[1]	PLUG AS
	214-7568	[1]	SEAL-O-RING
	360-3679	[1]	PLUG-CONNECTOR (9/16-18-THD)
4.	6V-5219 M	[1]	BOLT (M8X1.25X40-MM)
5.	6V-9804 M	[2]	BOLT (M8X1.25X75-MM)
6.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34920136

232-0343: REGULATOR GP-FUEL PRESSURE

REGULATOR GP-FUEL PRESSURE

232-0343 REGULATOR GP-FUEL PRESSURE
S/N TX61-UP; BMA6397-UP
PART OF 237-2263 LINES GP-FUEL FILTER

i02001981 SEBP3492

2320343 REGULATOR GP-FUEL PRESSURE Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	214-7568	[1]	SEAL-O-RING
2.	369-6662	[1]	REGULATOR AS (FUEL PRESSURE)

#SEBP34920137

112-6978: TANK GP-FUEL

TANK GP-FUEL

112-6978 TANK GP-FUEL
S/N BAA1-UP
PART OF 215-6922 CHASSIS AR

i00786384 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-8306	[1]	SCREW-PURGE (1/2-20X1.625-IN)
3.	7M-8485	[1]	SEAL-O-RING
4.	7X-7700	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	7D-7111	[1]	SEAL-O-RING
	9X-2205	[1]	KIT-CAP FILTER (FUEL TANK)
			(INCLUDES FILTER AS, SCREW, GASKETS, & VALVE)
5.	9P-7121	[1]	STRAINER-FUEL (FUEL TANK)
6.	9S-9334	[1]	PLUG
7.	157-8857	[1]	SENDER AS-FUEL LEVEL
	6C-3060	[1]	GASKET
	138-0444	[1]	KIT-REPAIR (FUEL LEVEL GAUGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	152-2113	[1]	TANK AS-FUEL
9.	7X-2553 M	[5]	BOLT (M16X2X40-MM)
10.	8T-4138 M	[6]	BOLT (M6X1X20-MM)
12.	9X-8257	[3]	WASHER (17.5X30X3.5-MM THK)
13.	3E-9411	[2]	WASHER-HARD (17.5X38X6-MM THK)
14.	1U-8846 B	[2]	SEALANT-GASKET
15.	8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP34920138

2Q-8209: TANK GP-FUEL

TANK GP-FUEL

2Q-8209 TANK GP-FUEL
S/N BAA1-UP
PART OF 189-7907 GUARD GP-HYDRAULIC TANK

i01999836 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-8306	[1]	SCREW-PURGE (1/2-20X1.625-IN)
2.	2Q-8208	[1]	TANK AS-FUEL
	5J-8225	[1]	SEAL-U-CUP
	9X-2206	[1]	ADAPTER AS-FUEL
4.	7M-8485	[1]	SEAL-O-RING
5.	7X-7700	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	9X-2205	[1]	KIT-CAP FILTER (FUEL TANK)
	9X-8600	[1]	SEAL-O-RING
6.	9P-7121	[1]	STRAINER-FUEL (FUEL TANK)
7.	9S-9334	[1]	PLUG
8.	157-8857	[1]	SENDER AS-FUEL LEVEL
	6C-3060	[1]	GASKET
	138-0444	[1]	KIT-REPAIR (FUEL LEVEL GAUGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
9.	7X-2553 M	[5]	BOLT (M16X2X40-MM)
10.	8T-4138 M	[6]	BOLT (M6X1X20-MM)
11.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
12.	9X-8257	[3]	WASHER (17.5X30X3.5-MM THK)
13.	3E-9411	[2]	WASHER-HARD (17.5X38X6-MM THK)
14.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP34920139

122-5053: VALVE GP-SOLENOID

VALVE GP-SOLENOID

122-5053 VALVE GP-SOLENOID
S/N TX61-UP; BMA1-UP
PART OF 180-7341 PUMP GP-UNIT INJECTOR HYD

i01615229 SEBP3492

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	JZ	[1]	SEAL-O-RING
2.	JZ	[1]	RING-BACKUP
3.	JZ	[1]	SPACER-SPECIAL
4.	JZ	[1]	NUT-RETAINER (1/2-20-THD)
5.	JZ	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	9X-1484 J	[1]	KIT-SEAL (SOLENOID VALVE)
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	Z		NOT SERVICED SEPARATELY

Information:

FUEL SYSTEM

FILTER GP-FUEL

Engine News

A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21

A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}

Operation and Maintenance Manual

Fuel System - Prime
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Fuel System Primary Filter (Water Separator) - Drain
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Fuel System Secondary Filter - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Special Instruction

Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}

Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}

Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}

Specifications

Fuel Filter Base
3126B Engine for Caterpillar Built Machines

Fuel Filter and Water Separator
3126B Engine for Caterpillar Built Machines

Tool Operating Manual

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Disassembly and Assembly

Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement

Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement

Service Magazine

An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20

Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11

The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21

New Primary Fuel Filters are Available {1260, 1261}
2008/07/14

A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29

New All Metal Fuel and Water Separators Are Used For Certain Machines {1261, 1263}
2013/09/25

Caterpillar Parts SIS Catalog 950G II :

185-2069 PUMP GP-FUEL PRM & PRIM FILTER

210-5574 LINES GP-INJECTOR HYD PUMP

237-2263 LINES GP-FUEL FILTER

187-6277 LINES GP-FUEL FILTER

218-0706 LINES GP-FUEL DRAIN

189-6661 LINES GP-FUEL

178-0198 PUMP GP-UNIT INJECTION

180-7341 PUMP GP-UNIT INJECTOR HYD

210-5575 PUMP GP-UNIT INJECTOR HYD

232-0343 REGULATOR GP-FUEL PRESSURE

112-6978 TANK GP-FUEL

2Q-8209 TANK GP-FUEL

Truck sale:

Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.

79,420

Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA

Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT

Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.

Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO