AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-6991 LINES GP-LIFT CYLINDER S/N BAA1-UP PART OF 191-8989 HYDRAULIC AR-2 VALVE 950G II WHEEL LOADER


HYDRAULIC SYSTEM
LINES GP-CYLINDER
LINES GP-PILOT
LINES GP-RIDE CONTROL
LINES GP-CYLINDER
MOTOR GP

WHEEL LOADER 950G II WHEEL LOADER BAA
 950G II WHEEL LOADER BAA00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3492 950G II BAA   (1999)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-LIFT CYLINDER
112-6991 LINES GP-LIFT CYLINDER
LINES GP-TILT CYLINDER
112-6993 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
151-0884 LINES GP-TILT CYLINDER
 

#SEBP34920500
 

112-6991: LINES GP-LIFT CYLINDER

112-6991 LINES GP-LIFT CYLINDER
S/N BAA1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i00791836 SEBP3492
1126991 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [4] SEAL-RECTANGULAR  
2. 125-2804 [1] ELBOW  
3. 125-2805 [1] ELBOW  
4. 125-2806 [1] TUBE AS  
5. 125-2807 [1] TUBE AS  
6. 125-2809 I [2] HOSE AS  
7. 125-2811 I [2] HOSE AS  
8. 4J-5267 [4] SEAL-O-RING  
9. 6V-8716 [4] CONNECTOR (STRAIGHT)  
10. 6V-9746 [4] SEAL-O-RING  
11. 7G-3832 [2] GROMMET  
12. 7G-3833 [2] CLIP (TAB)  
13. 7G-3834 [2] CLIP (SLOT)  
14. 7M-8485 [4] SEAL-O-RING  
15. 8C-3205 [8] FLANGE-HALF  
16. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
18. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
19. 8T-4196 M [16] BOLT (M10X1.5X35-MM)  
20. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-6466 M [16] BOLT (M10X1.5X60-MM)  
22. 7X-7729 [2] WASHER (11X25X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34920501
 

145-2805: LINES GP-PILOT

145-2805 LINES GP-PILOT
S/N BAA1-UP
PART OF 192-4676, 192-4678, 202-8010 HYDRAULIC AR-3 VALVE
i00798493 SEBP3492
1452805 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-9798 [2] TAG-IDENTIFICATION (LETTER, NUMBER C2)  
2. 4V-9799 [2] TAG-IDENTIFICATION (LETTER, NUMBER C1)  
3. 145-0298 I [1] HOSE AS  
4. 145-0299 I [1] HOSE AS  
5. 5P-7703 [1] GROMMET (52-MM ID)  
6. 8M-2773 [3] CLIP (LOOP)  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34920502
 

214-3317: LINES GP-PILOT

214-3317 LINES GP-PILOT
S/N BAA1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i01683706 SEBP3492
2143317 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-1122 [2] TAG-IDENTIFICATION (LETTERS SPL)  
2. 1V-1123 [4] TAG-IDENTIFICATION (LETTERS RET)  
3. 7K-1181 [6] STRAP-CABLE  
4. 7K-3971 [2] TAG-IDENTIFICATION (LETTER, NUMBER L1)  
5. 7K-3972 [2] TAG-IDENTIFICATION (LETTER, NUMBER L2)  
6. 7K-3974 [2] TAG-IDENTIFICATION (LETTER, NUMBER T1)  
7. 7K-3975 [2] TAG-IDENTIFICATION (LETTER, NUMBER T2)  
8. 8X-1147 [4] SPACER (10.3X15.9X74.7-MM THK)  
9. 8Y-8387 [8] BLOCK  
10. 8Y-8388 [2] PLATE  
11. 115-8436 I [1] HOSE AS  
12. 130-8284 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
13. 140-3604 I [1] HOSE AS  
14. 145-0291 I [1] HOSE AS  
15. 145-0292 I [1] HOSE AS  
16. 145-0294 I [1] HOSE AS  
17. 145-0295 I [1] HOSE AS  
18. 148-7221 [1] BRACKET AS  
19. 152-9074 I [1] HOSE AS  
20. 206-0397 I [1] HOSE AS  
21. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
22. 148-8415 [2] REDUCER AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
23. 150-4037 [1] TEE AS  
  6V-8398 [2] SEAL-O-RING  
  6V-9844 [1] TEE-SWIVEL  
24. 1S-0994 [1] CLIP (LOOP)  
25. 3K-0360 [1] SEAL-O-RING  
26. 4D-7733 [1] CLIP (LOOP)  
27. 5P-2369 [1] CLIP (LOOP)  
28. 5P-4295 [4] CLIP  
29. 5P-7470 [1] CLIP (SLOT)  
30. 5P-7471 [1] CLIP (TAB)  
31. 5P-8182 [1] GROMMET (46-MM ID)  
32. 6V-8397 [12] SEAL-O-RING  
33. 6V-8398 [1] SEAL-O-RING  
34. 8M-2773 [6] CLIP (LOOP)  
35. 8T-0077 [1] CONNECTOR  
36. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [2] NUT (M10X1.5-THD)  
38. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
39. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
40. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
41. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
42. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
43. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34920503
 

207-8630: LINES GP-RIDE CONTROL

207-8630 LINES GP-RIDE CONTROL -2-VALVE
S/N BAA1-UP
PART OF 201-0319 CONTROL AR-RIDE
i01724572 SEBP3492
2078630 LINES GP-RIDE CONTROL Parts scheme 2078630 LINES GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-0199 [1] SPACER  
2. 5V-9221 [1] SPACER (13.8X25X25-MM THK)  
3. 7J-5311 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
4. 131-3520 [1] BLOCK  
5. 141-1481 Y [1] VALVE GP-SHUTTLE  
6. 151-6937 I [1] HOSE AS  
7. 155-3758 Y [1] ACCUMULATOR & MTG GP-RIDE CONT  
8. 161-1903 I [1] HOSE AS  
9. 161-1908 I [1] HOSE AS  
10. 163-5779 I [1] HOSE AS  
11. 191-0531 I [1] HOSE AS  
12. 207-1810 [1] VALVE GP-CHECK (RIDE CONTROL)  
13. 214-3329 I [1] HOSE AS  
14. 237-2609 [1] TUBE AS  
15. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
16. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
17. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
18. 148-8370 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
19. 148-8374 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
20. 148-8412 [2] REDUCER AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  6V-8944 [1] REDUCER  
21. 148-8428 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
22. 148-8429 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-9840 [1] TEE-SWIVEL  
23. 150-4043 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
24. 153-6241 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8C-8989 [1] ELBOW  
25. 1P-3705 [1] SEAL-RECTANGULAR  
26. 1P-3707 [1] SEAL-RECTANGULAR  
27. 4J-0520 [1] SEAL-O-RING  
28. 5P-7468 [3] CLIP (SLOT)  
29. 5P-7469 [3] CLIP (TAB)  
30. 5P-8444 [3] GROMMET (37-MM ID)  
31. 6V-8398 [1] SEAL-O-RING  
32. 6V-8557 [2] NUT-FACE SEAL (1-7/16-12-THD)  
33. 7X-2534 M [2] BOLT (M6X1X50-MM)  
34. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
35. 7X-7729 [4] WASHER (11X25X3-MM THK)  
36. 8C-3206 [2] FLANGE-HALF  
37. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
40. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
41. 8T-4223 [11] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
43. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
44. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920504
 

207-8631: LINES GP-RIDE CONTROL

207-8631 LINES GP-RIDE CONTROL -3-VALVE
S/N BAA1-UP
PART OF 201-0320, 202-8124 CONTROL AR-RIDE
Type 1
i01724498 SEBP3492
2078631 LINES GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-0199 [1] SPACER  
2. 5V-9221 [1] SPACER (13.8X25X25-MM THK)  
3. 7J-5311 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
4. 207-1810 [1] VALVE GP-CHECK  
5. 131-3520 [1] BLOCK  
6. 141-1481 Y [1] VALVE GP-SHUTTLE  
7. 155-3758 Y [1] ACCUMULATOR & MTG GP-RIDE CONT  
8. 161-1903 I [2] HOSE AS  
9. 207-7019 I [1] HOSE AS  
10. 163-5779 I [1] HOSE AS  
11. 191-0531 I [1] HOSE AS  
12. 214-3329 I [1] HOSE AS  
13. 237-2609 [1] TUBE AS  
14. 1P-3705 [1] SEAL-RECTANGULAR  
15. 1P-3707 [1] SEAL-RECTANGULAR  
16. 3J-1907 [1] SEAL-O-RING  
17. 3K-0360 [5] SEAL-O-RING  
18. 4J-0520 [1] SEAL-O-RING  
19. 5K-9090 [6] SEAL-O-RING  
20. 5P-7468 [3] CLIP (SLOT)  
21. 5P-7469 [3] CLIP (TAB)  
22. 5P-8444 [3] GROMMET (37-MM ID)  
23. 6V-8397 [2] SEAL-O-RING  
24. 6V-8398 [11] SEAL-O-RING  
25. 6V-8557 [2] NUT-FACE SEAL (1-7/16-12-THD)  
26. 6V-8625 [2] ELBOW  
27. 6V-8639 [1] CONNECTOR  
28. 6V-8723 [1] ELBOW  
29. 6V-8782 [1] TEE  
30. 6V-8944 [2] REDUCER  
31. 6V-9008 [1] ELBOW  
32. 6V-9840 [1] TEE-SWIVEL  
33. 6V-9851 [1] ELBOW  
34. 6V-9873 [1] CONNECTOR  
35. 7M-8485 [1] SEAL-O-RING  
36. 7X-2534 M [2] BOLT (M6X1X50-MM)  
37. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
38. 7X-7729 [4] WASHER (11X25X3-MM THK)  
39. 8C-3206 [2] FLANGE-HALF  
40. 8C-8989 [1] ELBOW  
41. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
43. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
44. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
45. 8T-4223 [11] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
47. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
48. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920505
 

207-8631: LINES GP-RIDE CONTROL

207-8631 LINES GP-RIDE CONTROL -3-VALVE
S/N BAA1-UP
PART OF 201-0320, 202-8124 CONTROL AR-RIDE
Type 2
i02377224 SEBP3492
2078631 LINES GP-RIDE CONTROL Parts scheme 2078631 LINES GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-0199 [1] SPACER  
2. 5V-9221 [1] SPACER (13.8X25X25-MM THK)  
3. 7J-5311 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
4. 131-3520 [1] BLOCK  
5. 141-1481 Y [1] VALVE GP-SHUTTLE  
6. 151-6937 CI [1] HOSE AS  
7. 155-3758 Y [1] ACCUMULATOR & MTG GP-RIDE CONT  
8. 161-1903 CI [1] HOSE AS  
9. 163-5779 I [1] HOSE AS  
10. 191-0531 I [1] HOSE AS  
11. 207-1810 [1] VALVE GP-CHECK  
12. 207-7019 I [1] HOSE AS  
13. 214-3329 I [1] HOSE AS  
14. 237-2609 [1] TUBE AS  
15. 148-8340 C [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
16. 148-8357 C [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
17. 148-8364 C [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
18. 148-8370 C [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
19. 148-8374 C [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
20. 148-8412 C [2] REDUCER AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  6V-8944 [1] REDUCER  
21. 148-8428 C [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
22. 148-8429 C [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-9840 [1] TEE-SWIVEL  
23. 150-4043 C [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
24. 153-6241 C [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8C-8989 [1] ELBOW  
25. 1P-3705 [1] SEAL-RECTANGULAR  
26. 1P-3707 [1] SEAL-RECTANGULAR  
27. 4J-0520 [1] SEAL-O-RING  
28. 5P-7468 [3] CLIP (SLOT)  
29. 5P-7469 [3] CLIP (TAB)  
30. 5P-8444 [3] GROMMET (37-MM ID)  
31. 6V-8398 C [1] SEAL-O-RING  
32. 6V-8557 [2] NUT-FACE SEAL (1-7/16-12-THD)  
33. 7X-2534 M [2] BOLT (M6X1X50-MM)  
34. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
35. 7X-7729 [4] WASHER (11X25X3-MM THK)  
36. 8C-3206 [2] FLANGE-HALF  
37. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
40. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
41. 8T-4223 [11] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
43. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
44. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34920506
 

112-6993: LINES GP-TILT CYLINDER

112-6993 LINES GP-TILT CYLINDER
S/N BAA1-UP
PART OF 191-8989 HYDRAULIC AR-2 VALVE
i00791838 SEBP3492
1126993 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3704 [2] SEAL-RECTANGULAR  
2. 1P-3705 [1] SEAL-RECTANGULAR  
3. 6V-0852 [2] CAP-DUST  
4. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
5. 149-2707 C [1] PLATE  
6. 9S-4185 [1] PLUG (3/4-16-THD)  
7. 148-7186 C [1] TUBE AS  
8. 148-7187 C [1] TUBE AS  
9. 148-7188 C [2] BRACKET  
10. 148-7189 C [1] BRACKET  
11. 149-2706 CI [1] HOSE AS  
12. 130-6419 I [1] HOSE AS  
13. 149-2705 C [1] TUBE AS  
14. 1P-4579 [2] FLANGE-HALF  
15. 3J-1907 [2] SEAL-O-RING  
16. 3K-0360 [1] SEAL-O-RING  
17. 5P-1076 C [2] WASHER-HARD (13.5X30X4-MM THK)  
18. 4J-0522 C [4] SEAL-O-RING  
19. 4J-0524 [1] SEAL-O-RING  
20. 8T-4648 M [4] BOLT (M12X1.75X70-MM)  
21. 6V-0397 C [6] FLANGE-HALF  
22. 8T-6868 M [4] BOLT (M12X1.75X80-MM)  
23. 8T-4121 C [6] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
25. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
26. 8T-4184 CM [4] BOLT (M12X1.75X45-MM)  
27. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
28. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
29. 8T-4139 CM [3] BOLT (M12X1.75X30-MM)  
30. 8T-4223 C [34] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4244 M [1] NUT (M12X1.75-THD)  
32. 8S-0024 [1] CLIP (TAB)  
33. 8S-0023 [1] CLIP (SLOT)  
34. 5P-4295 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34920507
 

151-0884: LINES GP-TILT CYLINDER

151-0884 LINES GP-TILT CYLINDER
S/N BAA1-UP
PART OF 202-8010 HYDRAULIC AR-3 VALVE
i00798492 SEBP3492
1510884 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [2] CAP-DUST  
2. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
3. 150-1280 [2] WASHER-HARD (26X44X22-MM THK)  
4. 148-7186 [1] TUBE AS  
5. 148-7187 [1] TUBE AS  
6. 148-7188 [2] BRACKET  
7. 148-7189 [1] BRACKET  
8. 149-2707 [1] PLATE  
9. 151-0869 [1] TUBE AS  
10. 151-0870 I [1] HOSE AS  
11. 151-0871 I [1] HOSE AS  
12. 153-9460 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
13. 153-9462 [2] CLAMP  
14. 1P-3704 [3] SEAL-RECTANGULAR  
15. 3J-1907 [2] SEAL-O-RING  
16. 3K-0360 [1] SEAL-O-RING  
17. 4J-0522 [5] SEAL-O-RING  
18. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
19. 6V-0397 [8] FLANGE-HALF  
20. 6V-8237 [2] WASHER (26X44X4-MM THK)  
21. 7X-2454 M [2] BOLT (M24X3X110-MM)  
22. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
24. 8T-4139 M [7] BOLT (M12X1.75X30-MM)  
25. 8T-4183 M [16] BOLT (M12X1.75X40-MM)  
26. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
27. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
28. 8T-4223 [34] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
30. 9S-4185 [1] PLUG (3/4-16-THD)  
31. 8T-4244 M [1] NUT (M12X1.75-THD)  
32. 8S-0024 [1] CLIP (TAB)  
33. 8S-0023 [1] CLIP (SLOT)  
34. 5P-4295 [1] CLIP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP34920508
 

191-2943: MOTOR GP-GEAR

191-2943 MOTOR GP-GEAR -HYDRAULIC FAN
S/N BAA1-UP
PART OF 189-6650 RADIATOR & FAN GP
i01529511 SEBP3492
1912943 MOTOR GP-GEAR Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-9029 M [4] BOLT  
2. 136-9030 [4] WASHER (12.5X18X1.5-MM THK)  
3. 150-3378 J [1] SEAL-SHAFT  
4. 096-0194 J [1] RING-RETAINING  
5. 9S-4191 [1] PLUG (9/16-18-THD)  
6. 3J-1907 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  194-9632 J [1] KIT-SEAL  
  J   REPAIR KIT(S) MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP34920509
 

228-8527: MOTOR GP-PISTON

228-8527 MOTOR GP-PISTON -AUTOMATIC REVERSING FAN
S/N BAA1-UP
PART OF 227-5345 CONTROL & LINES GP-FAN
i02158091 SEBP3492
2288527 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9597 [1] RING-RETAINING  
2. 185-0303 [1] SEAL-OIL  
3. 155-9122 [1] SWASHPLATE  
4. 233-2530 Y [1] ROTATING GP-MOTOR (HYDRAULIC FAN)  
5. 231-4707 [1] SEAL-O-RING  
6. 8T-0341 M [4] BOLT-SOCKET HEAD (M10X1.5X60-MM)  
7. 204-2799 [1] DOWEL  
8. 191-7583 [1] BEARING-TAPERED  
9. 191-7582 B [1] SHIM (2.5-MM THK)  
10. 101-2862 [2] DOWEL  
11. 9S-8005 [1] PLUG (3/4-16-THD)  
12. 155-9125 [1] BEARING AS-ROLLER  
13. 269-7515 [1] SHAFT-DRIVE  
14. 194-9473 [1] RING  
15. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

Caterpillar Parts SIS Catalog 950G II :

LINES GP-HYDRAULIC OIL COOLER
173-0967 LINES GP-HYDRAULIC OIL COOLER
LINES GP-HYDRAULIC OIL COOLER
173-0967 LINES GP-HYDRAULIC OIL COOLER
LINES GP-HYDRAULIC
240-6804 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
240-6804 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
112-6990 LINES GP-HYDRAULIC
LINES GP-FRONT
248-6319 LINES GP-FRONT
LINES GP-FRONT
126-7738 LINES GP-FRONT
LINES GP-FRONT
126-7738 LINES GP-FRONT
LINES GP-PILOT
145-2805 LINES GP-PILOT
LINES GP-PILOT
214-3317 LINES GP-PILOT
LINES GP-RIDE CONTROL
207-8630 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
207-8631 LINES GP-RIDE CONTROL
LINES GP-RIDE CONTROL
207-8631 LINES GP-RIDE CONTROL
LINES GP-TILT CYLINDER
112-6993 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
151-0884 LINES GP-TILT CYLINDER
MOTOR GP-GEAR
191-2943 MOTOR GP-GEAR

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.