190-5096 WIRING GP-CHASSIS S/N AYA1-UP PART OF 216-8667 ELECTRICAL AR Type 1 IT62G II INTEGRATED TOOLCARRIER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 190-5096 WIRING GP-
1. 190-5096 WIRING GP-
2. 190-5096 WIRING GP-
3. 203-3925 WIRING GP-
4. 191-6802 WIRING GP-
5. 190-5038 WIRING GP-
6. 217-0771 WIRING GP-
7. 217-0771 WIRING GP-
8. 217-2996 WIRING GP-
9. 217-2996 WIRING GP-
0. INFORMATION

INTEGRATED TOOLCARRIER IT62G II INTEGRATED TOOLCARRIER AYA
IT62G II Integrated Toolcarrier AYA00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3493 IT62G II AYA (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

213-0045 WIRING GP-CAB

213-0046 WIRING GP-CAB

190-5096 WIRING GP-CHASSIS

203-3925 WIRING GP-COMMUNICATION

#SEBP34930270

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N AYA1-UP
PART OF 216-8667 ELECTRICAL AR
Type 1

i01480341 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[14]	STRAP-CABLE
3.	3D-9872	[2]	PLUG-BUTTON
4.	7K-1181	[3]	STRAP-CABLE
5.	118-7226 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
6.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	209-8697	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[11]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	8T-8737	[47]	PLUG-SEAL
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[2]	STRAP-CABLE
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	8T-8737	[7]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[13]	CLIP
21.	164-4227	[1]	CLIP
22.	5F-9757	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
51.	4H-1225	[3]	WASHER (11X22X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34930271

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N AYA1-UP
PART OF 216-8667 ELECTRICAL AR
Type 2

i02084195 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093 C	[15]	STRAP-CABLE
3.	3D-9872	[2]	PLUG-BUTTON
4.	7K-1181	[3]	STRAP-CABLE
5.	134-2252 CY	[1]	SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC OIL)
6.	172-8660 CY	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	234-0620 C	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[11]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	8T-8737	[47]	PLUG-SEAL
	7K-1181	[1]	STRAP-CABLE
	9X-6772	[2]	STRAP-CABLE
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	8T-8737	[7]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[13]	CLIP
21.	164-4227	[1]	CLIP
22.	5F-9757	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
51.	4H-1225	[3]	WASHER (11X22X6-MM THK)
52.	132-5789 C	[1]	CLIP (LADDER)
53.	7N-3718 C	[2]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34930272

190-5096: WIRING GP-CHASSIS

WIRING GP-CHASSIS

190-5096 WIRING GP-CHASSIS
S/N AYA1-UP
PART OF 216-8667 ELECTRICAL AR
Type 3

i02088120 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[15]	STRAP-CABLE
3.	3D-9872	[2]	PLUG-BUTTON
4.	7K-1181	[4]	STRAP-CABLE
5.	134-2252 Y	[1]	SENSOR GP-TEMPERATURE (8-VOLT)(HYDRAULIC OIL)
6.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
7.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
8.	136-3937	[1]	SHEET
9.	136-4129	[1]	BRACKET
10.	259-1107	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	112-4550 E		SLEEVE (21-CM)
11.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	188-6185	[2]	GROMMET
15.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
16.	190-5098 Y	[1]	PANEL GP-CIRCUIT BREAKER
17.	241-7878 C	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	155-2252	[1]	PLUG AS-CONNECTOR (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1521	[1]	BELL AS-END
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
18.	209-8699	[1]	HARNESS AS-CHASSIS (HYDRAULIC TANK)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
19.	033-8248	[1]	CLIP (LOOP)
20.	130-5300	[13]	CLIP
21.	164-4227	[1]	CLIP
22.	5F-9757	[1]	GROMMET
23.	1S-0994	[3]	CLIP (LOOP)
24.	2M-3433	[2]	GROMMET
25.	2M-9780	[1]	SEAL-O-RING
26.	3J-1907	[3]	SEAL-O-RING
27.	4D-7388	[1]	CLIP (LOOP)
28.	4K-8864	[2]	CLIP (LOOP)
29.	4P-7581	[1]	CLIP (LADDER)
30.	4P-8134	[1]	CLIP (LADDER)
31.	4S-1962	[2]	CLIP (LOOP)
32.	4S-4455	[1]	CLIP
33.	5C-8312 M	[4]	NUT (M4X0.7-THD)
34.	6D-4244	[8]	CLIP (LOOP)
35.	6D-4246	[3]	CLIP (LOOP)
36.	6V-1889	[4]	CLIP (LOOP)
37.	7D-7233	[1]	CLIP (LOOP)
38.	8C-9660	[8]	WASHER (4.6X7.9X0.8-MM THK)
39.	8T-4121	[42]	WASHER-HARD (11X21X2.5-MM THK)
40.	8T-4133 M	[8]	NUT (M10X1.5-THD)
41.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
42.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4244 M	[1]	NUT (M12X1.75-THD)
46.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
47.	9M-8406	[2]	CLIP (LOOP)
48.	8M-2770	[3]	CLIP (LOOP)
49.	2A-2677	[1]	SPACER (10.7X17.14X19.05-MM THK)
50.	4D-7794	[1]	CLIP
51.	4H-1225	[3]	WASHER (11X22X6-MM THK)
52.	132-5789	[1]	CLIP (LADDER)
53.	7N-3718	[2]	CLIP
54.	218-4935	[1]	SUPPRESSOR-ARC
55.	249-5492	[1]	GUARD-SWITCH
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34930273

203-3925: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

203-3925 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N AYA1-UP
PART OF 201-4080 INSTALLATION AR-COMMUNICATION

i01911972 SEBP3493

2033925 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	201-6787	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8T-8737	[18]	PLUG-SEAL
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
2.	8M-2770	[2]	CLIP (LOOP)
3.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP34930274

191-6802: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

191-6802 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N AYA1-UP
PART OF 191-3314 COOLER & MTG AR-AXLE OIL

i01723555 SEBP3493

1916802 WIRING GP-ELECTRIC CLUTCH Parts scheme

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	155-8998	[1]	SWITCH AS-TEMPERATURE (AXLE OIL COOLER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
3.	224-8889	[1]	HARNESS AS-SENSOR (COOLER PUMP CLUTCH SWITCH)
	155-2269	[1]	PLUG AS-CONNECTOR (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	224-8888	[1]	HARNESS AS-CONTROL (COOLER PUMP CLUTCH)
	155-2269	[1]	PLUG AS-CONNECTOR (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5.	147-0385	[1]	CLIP
6.	4D-7794	[1]	CLIP
7.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
9.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
10.	3K-0360	[1]	SEAL-O-RING
	M		METRIC PART

#SEBP34930275

190-5038: WIRING GP-ENGINE

WIRING GP-ENGINE

190-5038 WIRING GP-ENGINE
S/N TX61-UP; BMA1-UP
HIGH SIDE ACTIVATION OF AIR INLET HEATER RELAY
PART OF 216-0850 ENGINE AR-COMPLETE

i01488511 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	105-1797	[6]	MOUNT
3.	153-8920	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	135-5975	[1]	GROMMET-WIRING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
4.	156-6175	[2]	CLIP (LADDER)
5.	195-7336 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
6.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
7.	113-8690	[1]	WASHER (11.1X37.9X3.3-MM THK)
8.	7X-7729	[1]	WASHER (11X25X3-MM THK)
9.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
10.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	156-9890	[1]	WASHER (9X30X4-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34930276

217-0771: WIRING GP-ENGINE

WIRING GP-ENGINE

217-0771 WIRING GP-ENGINE
S/N AYA1-163
PART OF 216-8667 ELECTRICAL AR

i01729952 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[6]	STRAP-CABLE
3.	116-4491	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	118-6878	[1]	BRACKET AS
5.	130-9811 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION LUBE OIL)
6.	130-9927	[1]	STRIP AS
7.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
8.	164-3652	[1]	ADAPTER
9.	216-4955	[1]	HARNESS AS-ENGINE
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
10.	130-5300	[4]	CLIP
11.	156-6175	[2]	CLIP (LADDER)
12.	194-6722 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
13.	195-0882	[1]	BRACKET AS
14.	1K-3113	[1]	SPACER (0.546X0.840X3.875-IN THK)
15.	1S-0994	[1]	CLIP (LOOP)
16.	3J-1907	[1]	SEAL-O-RING
17.	3K-0360	[2]	SEAL-O-RING
18.	4D-7794	[1]	CLIP
19.	5C-2890 M	[2]	NUT (M6X1-THD)
20.	5C-7261 M	[3]	NUT (M8X1.25-THD)
21.	5P-4116	[8]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	5P-4295	[1]	CLIP
23.	5P-9085	[2]	CLIP (LOOP)
24.	6D-4244	[2]	CLIP (LOOP)
25.	6D-4246	[7]	CLIP (LOOP)
26.	6D-4636	[1]	CLIP (LOOP)
27.	7J-0204	[1]	SEAL-O-RING
28.	8M-2770	[1]	CLIP (LOOP)
29.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
31.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
32.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
33.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
34.	8T-4190 M	[1]	BOLT (M16X2X25-MM)
35.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
36.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	8T-5001 M	[1]	BOLT (M12X1.75X130-MM)
38.	9M-8406	[3]	CLIP (LOOP)
39.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34930277

217-0771: WIRING GP-ENGINE

WIRING GP-ENGINE

217-0771 WIRING GP-ENGINE
S/N AYA164-UP
PART OF 216-8667 ELECTRICAL AR

i02373905 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[6]	STRAP-CABLE
3.	116-4491	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	118-6878	[1]	BRACKET AS
5.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(TRANSMISSION LUBE OIL)
	137-6645	[1]	PAD-CONNECTOR
6.	127-4667	[1]	STRIP AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
8.	164-3652	[1]	ADAPTER
9.	235-0576 C	[1]	HARNESS AS-ENGINE
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	8N-1521	[1]	BELL AS-END
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	3S-2093	[2]	STRAP-CABLE
	9X-6772	[1]	STRAP-CABLE
10.	130-5300	[4]	CLIP
11.	156-6175	[2]	CLIP (LADDER)
12.	194-6722 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
13.	195-0882	[1]	BRACKET AS
14.	1K-3113	[1]	SPACER (0.546X0.840X3.875-IN THK)
15.	1S-0994	[1]	CLIP (LOOP)
16.	3J-1907	[1]	SEAL-O-RING
17.	3K-0360	[2]	SEAL-O-RING
18.	4D-7794	[1]	CLIP
19.	5C-2890 M	[2]	NUT (M6X1-THD)
20.	5C-7261 M	[3]	NUT (M8X1.25-THD)
21.	5P-4116	[8]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	5P-4295	[1]	CLIP
23.	5P-9085	[2]	CLIP (LOOP)
24.	6D-4244	[2]	CLIP (LOOP)
25.	6D-4246	[7]	CLIP (LOOP)
26.	6D-4636	[1]	CLIP (LOOP)
27.	7J-0204	[1]	SEAL-O-RING
28.	8M-2770	[1]	CLIP (LOOP)
29.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
31.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
32.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
33.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
34.	8T-4190 M	[1]	BOLT (M16X2X25-MM)
35.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
36.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	8T-5001 M	[1]	BOLT (M12X1.75X130-MM)
38.	9M-8406	[3]	CLIP (LOOP)
39.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34930278

217-2996: WIRING GP-FRONT

WIRING GP-FRONT

217-2996 WIRING GP-FRONT
S/N AYA1-163
PART OF 216-8667 ELECTRICAL AR

i01722883 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-1225	[4]	WASHER (11X22X6-MM THK)
2.	5V-6152	[2]	CLAMP
3.	5V-6153	[1]	PLATE-COVER
4.	7K-1181	[8]	STRAP-CABLE
5.	197-0527	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	217-2997	[1]	HARNESS AS-FRONT CHASSIS (MAIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	8T-8737	[65]	PLUG-SEAL
7.	089-7338	[1]	SLEEVE (11X20X9-MM THK)
8.	101-3625	[1]	CLIP
9.	124-0174	[2]	CLIP (LOOP)
10.	130-5300	[8]	CLIP
11.	130-5301	[1]	CLIP
12.	4K-8864	[1]	CLIP (LOOP)
13.	5P-7464	[1]	CLIP (SLOT)
14.	5P-7465	[1]	CLIP (TAB)
15.	5P-9085	[2]	CLIP (LOOP)
16.	8M-2770	[4]	CLIP (LOOP)
17.	8M-2773	[2]	CLIP (LOOP)
18.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4133 M	[9]	NUT (M10X1.5-THD)
20.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
21.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
22.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)
23.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
24.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
25.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
27.	9M-8406	[4]	CLIP (LOOP)
28.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP34930279

217-2996: WIRING GP-FRONT

WIRING GP-FRONT

217-2996 WIRING GP-FRONT
S/N AYA164-UP
PART OF 216-8667 ELECTRICAL AR

i02410287 SEBP3493

For full view, you need register

Parts for your IT62G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-1225 C	[3]	WASHER (11X22X6-MM THK)
2.	5V-6152	[2]	CLAMP
3.	5V-6153	[1]	PLATE-COVER
4.	7K-1181 C	[10]	STRAP-CABLE
5.	234-0304 C	[1]	HARNESS AS-FRONT CHASSIS (MAIN)
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
6.	124-0174	[2]	CLIP (LOOP)
7.	130-5300 C	[7]	CLIP
8.	130-5301	[1]	CLIP
9.	1S-0994 C	[3]	CLIP (LOOP)
10.	4K-8864 C	[4]	CLIP (LOOP)
11.	4P-8134 C	[2]	CLIP (LADDER)
12.	5P-7464	[1]	CLIP (SLOT)
13.	5P-7465	[1]	CLIP (TAB)
14.	5P-9085 C	[1]	CLIP (LOOP)
15.	8M-2770 C	[1]	CLIP (LOOP)
16.	8M-2773 C	[1]	CLIP (LOOP)
17.	8T-4121 C	[12]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4133 CM	[8]	NUT (M10X1.5-THD)
19.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
20.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
21.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)
22.	8T-4223 C	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
24.	9M-8406 C	[2]	CLIP (LOOP)
25.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
IT62G Series II Integrated Toolcarrier

Engine Start Switch
IT62G Series II Integrated Toolcarrier

Fuses - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Battery Disconnect Switch
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Quick Coupler Control
IT62G Series II Integrated Toolcarrier

Circuit Breakers - Reset
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders

Fuses - Replace
IT62G Series II Integrated Toolcarrier

Bucket/Fork Selector
IT62G Series II Integrated Toolcarrier

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Technical Information Bulletin

Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}

Specifications

Pressure Switch (Service Brake Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System

Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System

Pressure Switch (Parking Brake Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System

Toggle Switch (Hood Tilt)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems

Temperature Switch (Front and Rear Axle Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines

Relay (Secondary Steering Intermediate)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System

Temperature Sensor (Transmission Lubrication Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Toggle Switch (Ground Level Shutdown)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems

Liquid Level Switch (Hydraulic Tank)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Temperature Sensor (Torque Converter Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Temperature Switch (Axle Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Bypass Switch (Power Train Oil Filter)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Temperature Sensor (Hydraulic Oil)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Senders
Caterpillar Monitoring System

Switches
Caterpillar Monitoring System

Sensors
Caterpillar Monitoring System

Action Lamp
Caterpillar Monitoring System

Action Alarm
Caterpillar Monitoring System

Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Start Relay
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Switches
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Testing and Adjusting

Speed Sensor - Adjust
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Electrical Connector - Inspect
Caterpillar Monitoring System

Electric Starting System - Test
3126B Engines

Wiring Harness (Open Circuit) - Test
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Wiring Harness (Short Circuit) - Test
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

System Schematic
Machine Security System

Electrical Connector - Inspect
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Wiring Harness (Open Circuit) - Test
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Wiring Harness (Short Circuit) - Test
Caterpillar Monitoring System

System Schematic
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Electrical Connector - Inspect
Work Area Visual System

Electrical Connector - Inspect
Machine Security System

System Schematic
MSS3s Machine Security System

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Component and Connector Locations
Caterpillar Monitoring System

Switch Circuits
Caterpillar Monitoring System

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Connector Locations
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

MID 081 - CID 0041 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0041 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0444 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0444 - FMI 05
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0444 - FMI 06
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 1521 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 1521 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0368 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0368 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0650 - FMI 09
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0650 - FMI 12
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0793 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0793 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0794 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0794 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0794 - FMI 07
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0795 - FMI 07
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0795 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0795 - FMI 05
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0795 - FMI 06
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Shutdown Switch Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

MID 081 - CID 0177 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

MID 081 - CID 0177 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Wiring Information
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Component and Connector Locations
Machine Security System

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Improved Pressure Switch Now Used {1435}
2003/07/28

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

An Improved Backup Alarm is Now Available {7406}
2009/01/05