210-5574 LINES GP-INJECTOR HYD PUMP S/N 5GG1-UP PART OF 172-4043 ENGINE AR-CORE 950G II WHEEL LOADER

FUEL SYSTEM

PUMP GP-UNIT INJECTOR HYD

0. 210-5574 LINES GP-I
1. 210-5574 LINES GP-I

FILTER GP-FUEL

2. 185-2069 PUMP GP-FU
3. 212-3657 PUMP GP-FU

PUMP GP-FUEL INJECTION

4. 178-0198 PUMP GP-UN
5. 180-7341 PUMP GP-UN
6. 180-7341 PUMP GP-UN
7. 210-5575 PUMP GP-UN
8. 210-5575 PUMP GP-UN

LINES GP-FUEL

9. 232-0343 REGULATOR
0. INFORMATION

WHEEL LOADER 950G II WHEEL LOADER AXX
950G II Wheel Loader AXX00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3495 950G II AXX (1999)

FUEL SYSTEM

PUMP GP-UNIT INJECTOR HYD

210-5574 LINES GP-INJECTOR HYD PUMP

180-7341 PUMP GP-UNIT INJECTOR HYD

210-5575 PUMP GP-UNIT INJECTOR HYD

#SEBP34950160

210-5574: LINES GP-INJECTOR HYD PUMP

LINES GP-INJECTOR HYD PUMP

210-5574 LINES GP-INJECTOR HYD PUMP
S/N 5GG1-UP
PART OF 172-4043 ENGINE AR-CORE

i01692240 SEBP3495

2105574 LINES GP-INJECTOR HYD PUMP Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	179-7001 Y	[1]	ADAPTER GP-OIL LINE
2.	200-4528	[1]	HOSE AS
3.	227-5928	[1]	TUBE AS
4.	030-8196	[1]	CONNECTOR
5.	2M-9780	[1]	SEAL-O-RING
6.	3J-1907	[1]	SEAL-O-RING
7.	4F-9653	[1]	SEAL-O-RING
8.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
9.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
10.	9X-0261	[1]	ADAPTER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34950161

210-5574: LINES GP-INJECTOR HYD PUMP

LINES GP-INJECTOR HYD PUMP

210-5574 LINES GP-INJECTOR HYD PUMP
S/N TX61-UP; 5GG1-UP
PART OF 172-4043, 291-9172, 456-5060 ENGINE AR-CORE

i02104063 SEBP3495

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	183-3399 C	[1]	CONNECTOR AS
	6V-8636	[1]	CONNECTOR
	214-7568	[1]	SEAL-O-RING
	221-3494	[1]	SEAL-O-RING
2.	227-5928	[1]	TUBE AS
3.	247-3755 C	[1]	TUBE AS
4.	426-4106 C	[1]	ADAPTER AS
	030-8196		CONNECTOR
	238-5081	[1]	SEAL-O-RING
5.	329-5451 C	[1]	ADAPTER AS
	9X-0261	[1]	ADAPTER
	214-7566		SEAL-O-RING
	214-7568	[1]	SEAL-O-RING
6.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
7.	4F-9653	[1]	SEAL-O-RING
8.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP34950162

185-2069: PUMP GP-FUEL PRM & PRIM FILTER

PUMP GP-FUEL PRM & PRIM FILTER

185-2069 PUMP GP-FUEL PRM & PRIM FILTER
S/N TX61-UP; 5GG1-UP
PART OF 216-0848, 291-9170 ENGINE AR-COMPLETE

i01690933 SEBP3495

1852069 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	9V-9295 I	[1]	HOSE AS
3.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP)
4.	392-0776	[1]	VALVE AS-DRAIN (FUEL FILTER)
	214-7568	[1]	SEAL-O-RING
	179-9348	[1]	VALVE-DRAIN
5.	191-1782	[1]	SPACER (8.5X12.7X38.2-MM THK)
6.	206-6876	[1]	CAP-TUBE
7.	209-8441 Y	[1]	HARNESS AS-PUMP (FUEL PRIMING)
8.	212-3657 Y	[1]	PUMP GP-FUEL PRM & WATER SEP (ELECTRIC)
9.	232-1374	[1]	BRACKET
10.	232-1376	[2]	SPACER (8.5X12.7X139.1-MM THK)
11.	370-6297	[1]	CONNECTOR AS
	6V-8715	[1]	CONNECTOR
	228-7089	[1]	SEAL-O-RING
	238-5081	[1]	SEAL-O-RING
12.	398-5601	[1]	PLUG AS
	238-5081	[1]	SEAL-O-RING
	360-3681	[1]	PLUG (7/8-14-THD)
13.	315-9835	[1]	ELBOW AS
	6V-0484	[1]	ELBOW
	214-7568	[1]	SEAL-O-RING
14.	4P-7581	[1]	CLIP (LADDER)
15.	329-5459	[1]	ADAPTER AS
	5P-1404	[1]	ADAPTER
	238-5081	[1]	SEAL-O-RING
16.	353-5105	[1]	ADAPTER AS
	030-8194	[1]	CONNECTOR
	238-5081	[1]	SEAL-O-RING
17.	305-3684	[1]	PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF)
18.	321-8671	[1]	CONNECTOR AS
	030-8188	[1]	CONNECTOR
	238-5080	[1]	SEAL-O-RING
19.	9N-0869	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
20.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
22.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
23.	8T-7352 M	[2]	BOLT (M8X1.25X160-MM)
24.	8T-9655	[8]	MOUNT-ISOLATION
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP34950163

212-3657: PUMP GP-FUEL PRM & WATER SEP

PUMP GP-FUEL PRM & WATER SEP

212-3657 PUMP GP-FUEL PRM & WATER SEP -PRIMARY FILTER-ELECTRIC
S/N TX61-UP; 5GG1-UP
PART OF 185-2069 PUMP GP-FUEL PRM & PRIM FILTER

i01699680 SEBP3495

2123657 PUMP GP-FUEL PRM & WATER SEP Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-9570 Y	[1]	FILTER GP-WATER SEP & FUEL (PRIMING)
2.	217-8339	[1]	PUMP GP-FUEL PRIMING (24-VOLT)
	6D-5801	[2]	LOCKNUT (8-32-THD)
	9S-2437	[3]	SCREW-TAPPING (10-24X19.05-MM)
	9S-8002	[1]	PLUG (7/16-20-THD)
	179-7400	[2]	SEAL
	Y		SEPARATE ILLUSTRATION

#SEBP34950164

178-0198: PUMP GP-UNIT INJECTION

PUMP GP-UNIT INJECTION

178-0198 PUMP GP-UNIT INJECTION
S/N TX61-UP; 5GG1-UP
PART OF 172-4043, 291-9172, 456-5060 ENGINE AR-CORE

i01420546 SEBP3495

1780198 PUMP GP-UNIT INJECTION Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-0199 Y	[1]	INJECTOR GP-FUEL
2.	199-6103	[1]	BOLT-SPECIAL
3.	159-0288	[1]	DEFLECTOR
4.	8T-2396 M	[1]	BOLT (M6X1X60-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34950165

180-7341: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

180-7341 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-6099
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD

i01418548 SEBP3495

1807341 PUMP GP-UNIT INJECTOR HYD Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-5053 Y	[1]	VALVE GP-SOLENOID (INJECTION ACTUATION)
2.	128-3473	[1]	GEAR-PUMP DRIVE (36-TEETH)
3.	162-9610	[1]	PUMP GP-FUEL INJECTION
4.	162-9612	[1]	PUMP GP-FUEL TRANSFER
5.	179-7004	[1]	ADAPTER AS
	153-4906	[1]	SEAL-O-RING
6.	4P-5918	[1]	CLIP
7.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
9.	118-0275	[1]	WASHER (13.5X32X8-MM THK)
10.	131-1845	[1]	PLUG-HEX SOCKET
12.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)

	144-7339 F	[1]	SEAL-O-RING (FUEL TRANSFER PUMP)
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34950166

180-7341: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

180-7341 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; 5GG6100-UP
PART OF 210-5575 PUMP GP-UNIT INJECTOR HYD

i02141138 SEBP3495

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-5053 Y	[1]	VALVE GP-SOLENOID (INJECTION ACTUATION)
2.	128-3473	[1]	GEAR-PUMP DRIVE (36-TEETH)
3.	162-9610	[1]	PUMP GP-FUEL INJECTION
4.	162-9612	[1]	PUMP GP-FUEL TRANSFER
5.	250-1424 C	[1]	ELBOW AS
	6V-8724	[1]	ELBOW
	214-7568	[1]	SEAL-O-RING
	221-3494	[1]	SEAL-O-RING
6.	4P-5918	[1]	CLIP
7.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
9.	118-0275	[1]	WASHER (13.5X32X8-MM THK)
10.	131-1845	[1]	PLUG-HEX SOCKET
12.	8T-4139 M	[1]	BOLT (M12X1.75X30-MM)

	144-7339 F	[1]	SEAL-O-RING (FUEL TRANSFER PUMP)
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34950167

210-5575: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

210-5575 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 172-4043, 291-9172 ENGINE AR-CORE

i01698847 SEBP3495

2105575 PUMP GP-UNIT INJECTOR HYD Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-7341 Y	[1]	PUMP GP-UNIT INJECTOR HYD
2.	185-3241	[1]	SEAL-O-RING
3.	3J-1907	[1]	SEAL-O-RING
4.	6V-5219 M	[1]	BOLT (M8X1.25X40-MM)
5.	6V-9804 M	[2]	BOLT (M8X1.25X75-MM)
6.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
7.	9S-4191	[1]	PLUG (9/16-18-THD)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34950168

210-5575: PUMP GP-UNIT INJECTOR HYD

PUMP GP-UNIT INJECTOR HYD

210-5575 PUMP GP-UNIT INJECTOR HYD
S/N TX61-UP; 5GG1-UP
PART OF 172-4043, 291-9172, 456-5060 ENGINE AR-CORE

i05888650 SEBP3495

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-7341 Y	[1]	PUMP GP-UNIT INJECTOR HYD
2.	185-3241	[1]	SEAL-O-RING
3.	389-3708 C	[1]	PLUG AS
	214-7568	[1]	SEAL-O-RING
	360-3679	[1]	PLUG-CONNECTOR (9/16-18-THD)
4.	6V-5219 M	[1]	BOLT (M8X1.25X40-MM)
5.	6V-9804 M	[2]	BOLT (M8X1.25X75-MM)
6.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP34950169

232-0343: REGULATOR GP-FUEL PRESSURE

REGULATOR GP-FUEL PRESSURE

232-0343 REGULATOR GP-FUEL PRESSURE
S/N TX61-UP; 5GG2934-UP
PART OF 237-2263 LINES GP-FUEL FILTER

i01929354 SEBP3495

2320343 REGULATOR GP-FUEL PRESSURE Parts scheme

For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	214-7568	[1]	SEAL-O-RING
2.	369-6662	[1]	REGULATOR AS (FUEL PRESSURE)

Information:

FUEL SYSTEM

PUMP GP-UNIT INJECTOR HYD

Special Instruction

Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}

Specifications

Injection Actuation Pressure Control Valve
3126B Engine for Caterpillar Built Machines

Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines

Unit Injector Hydraulic Pump
3126B Engine for Caterpillar Built Machines

Tool Operating Manual

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

Troubleshooting

CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Injection Actuation Pressure - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Disassembly and Assembly

Injection Actuation Pressure Control Valve - Remove and Install
3126B Engines for Caterpillar Built Machines

Unit Injector Hydraulic Pump - Remove
3126B Engines for Caterpillar Built Machines

Unit Injector Hydraulic Pump - Install
3126B Engines for Caterpillar Built Machines