AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

500-1945 EDGE-CUTTING S/N AXX1-UP 950G II WHEEL LOADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
FORK GP

WHEEL LOADER 950G II WHEEL LOADER AXX
 950G II Wheel Loader AXX00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3495 950G II AXX   (1999)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
EDGE-CUTTING
500-1942 EDGE-CUTTING
EDGE-CUTTING
500-1944 EDGE-CUTTING
EDGE-CUTTING
500-1945 EDGE-CUTTING
EDGE-END
223-8168 EDGE-END
447-0351 EDGE-END
447-0352 EDGE-END
 

#SEBP34950920
 

500-1945: EDGE-CUTTING

500-1945 EDGE-CUTTING
S/N AXX1-UP
i06676030 SEBP3495
5001945 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP34950921
 

223-8168: EDGE-END

223-8168 EDGE-END
S/N AXX1-UP
i02221111 SEBP3495
2238168 EDGE-END Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP34950922
 

447-0351: EDGE-END

447-0351 EDGE-END -LH
S/N AXX1-UP
i06206931 SEBP3495
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP34950923
 

447-0352: EDGE-END

447-0352 EDGE-END -RH
S/N AXX1-UP
i06207022 SEBP3495
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP34950924
 

500-1943: EDGE-END

500-1943 EDGE-END
S/N AXX1-UP
i06676122 SEBP3495
5001943 EDGE-END Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8091 [1] EDGE-END  
 

#SEBP34950925
 

447-0350: EDGE-SEGMENT

447-0350 EDGE-SEGMENT -CENTER
S/N AXX1-UP
i06206999 SEBP3495
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP34950926
 

257-1959: FORK AR-LOG & LUMBER

257-1959 FORK AR-LOG & LUMBER -PIN-ON FLAT FLOOR
S/N AXX1-UP
FOR USE WITH 950G,950G SERIES II OR 962,962G SERIES II WHEEL LOADER
i02232523 SEBP3495
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  257-4266 Y [1] FORK GP-LOG & LUMBER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP34950927
 

365-1316: FORK GP

365-1316 FORK GP
S/N AXX1-UP
i07747236 SEBP3495
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  366-9394 Y [1] KIT-HYDRAULIC LINES  
  366-9384 [2] ARM AS  
    (EACH INCLUDES)
  165-3929 [12] BOLT (3/8-16X1.5-IN)  
  3K-6060 [12] LOCKNUT (3/8-16-THD)  
  5M-2894 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  366-9395 [1] PAD-RUBBER  
  1D-4595 [2] BOLT (5/8-11X6-IN)  
  7X-0334 [4] BOLT (1/2-13X5-IN)  
  1B-2886 [4] BOLT (1/2-13X3.75-IN)  
  0V-0375 [4] BOLT (1/2-13X3.25-IN)  
  355-4595 J [2] CYLINDER GP-FORK (UPPER)  
  355-4596 H [2] CYLINDER GP-FORK (LOWER)  
  159-8035 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK)  
  159-8036 [1] FILM-WARNING (READ OMM)  
  253-3431 [1] FILM-WARNING (CRUSH HAZARD, FORKS, READ OMM)  
  3E-9861 [2] LOCKNUT (5/8-11-THD)  
  9X-0941 [12] LOCKNUT (1/2-13-THD)  
  366-9393 [2] PAD GP  
    (EACH INCLUDES)
  165-3929 [12] BOLT (3/8-16X1.5-IN)  
  3K-6060 [12] LOCKNUT (3/8-16-THD)  
  5M-2894 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  366-9395 [1] PAD-RUBBER  
  355-4604 [2] PIN  
  366-9387 [2] PIN-LOWER  
  366-9390 [2] PIN-LOWER  
  366-9386 [2] PIN-UPPER  
  366-9388 [2] PIN-UPPER  
  366-9389 [2] PIN-UPPER  
  137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)(FORKS)  
  366-9385 [2] SHAFT-HANGER  
  366-9383 [2] TINE  
   
    AVAILABLE REPAIR KIT(S):
  356-1177 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES ROD WIPER, SEALS & RINGS)
  356-1178 H [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES ROD WIPER, SEALS & RINGS)
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP34950928
 

157-3466: FORK GP-LOG

157-3466 FORK GP-LOG -PIN-ON
S/N AXX1-UP
Type 1
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i02104802 SEBP3495
1573466 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 4K-6543 [2] PLATE  
3. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
4. 153-3742 [2] TIP-WEAR  
5. 153-3743 [4] PIN-RETAINER  
6. 153-3744 [4] RING-RETAINING  
7. 153-3747 Y [2] CYLINDER GP-FORK  
8. 153-3750 [2] PIN-PIVOT  
9. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
10. 8T-4244 M [6] NUT (M12X1.75-THD)  
11. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
12. Y [1] FRAME GP-FORK  
13. 159-7211 I [2] HOSE AS  
14. 160-9881 [2] PIN AS  
15. 169-8238 [2] PIN AS  
16. 174-6457 [1] CLAMP AS  
  7K-9209 [4] SEAL-LIP TYPE  
  8K-2360 [4] BUSHING  
17. 177-3032 I [1] HOSE AS  
18. 177-3033 I [1] HOSE AS  
19. 177-3034 I [1] HOSE AS  
20. 177-3035 I [1] HOSE AS  
21. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
22. 8T-4192 M [9] BOLT (M12X1.75X25-MM)  
23. 8T-4184 M [1] BOLT (M12X1.75X45-MM)  
24. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
25. 187-6238 I [1] HOSE AS  
26. 187-6239 I [1] HOSE AS  
27. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
28. 1P-4577 [8] FLANGE-HALF  
29. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
30. 3D-2824 [4] SEAL-O-RING  
31. 3E-7443 [2] TEE-UNION  
32. 4J-0520 [4] SEAL-O-RING  
33. 5K-9090 [4] SEAL-O-RING  
34. 5P-1076 [9] WASHER-HARD (13.5X30X4-MM THK)  
35. 5P-7468 [6] CLIP (SLOT)  
36. 5P-7469 [6] CLIP (TAB)  
37. 5P-8444 [6] GROMMET (37-MM ID)  
38. 6V-9007 [4] ELBOW  
39. 6V-9746 [8] SEAL-O-RING  
40. 6V-9854 [2] ELBOW (SWIVEL)  
41. 7G-3832 [4] GROMMET  
42. 7G-3833 [4] CLIP (TAB)  
43. 7G-3834 [4] CLIP (SLOT)  
44. 7X-0332 [2] BOLT (1/2-13X4.5-IN)  
45. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4133 M [8] NUT (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34950929
 

157-3466: FORK GP-LOG

157-3466 FORK GP-LOG -PIN-ON
S/N AXX1-UP
Type 2
FOR USE WITH MACHINES EQUIPPED WITH 3RD VALVE HYDRAULIC ARRANGEMENT
i02056544 SEBP3495
1573466 FORK GP-LOG Parts scheme
  For full view, you need register

Parts for your 950G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1195 [4] SPACER-SPECIAL  
2. 4K-6543 [2] PLATE  
3. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
4. 153-3742 [2] TIP-WEAR  
5. 153-3743 [4] PIN-RETAINER  
6. 153-3744 [4] RING-RETAINING  
7. 203-2208 CY [2] CYLINDER GP-FORK  
8. 153-3750 C [2] PIN-PIVOT  
9. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
10. 8T-4244 M [6] NUT (M12X1.75-THD)  
11. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
12. Y [1] FRAME GP-FORK  
13. 159-7211 I [2] HOSE AS  
14. 160-9881 C [2] PIN AS  
15. 169-8238 C [2] PIN AS  
16. 174-6457 [1] CLAMP AS  
  7K-9209 [4] SEAL-LIP TYPE  
  8K-2360 [4] BUSHING  
17. 177-3032 I [1] HOSE AS  
18. 177-3033 I [1] HOSE AS  
19. 177-3034 I [1] HOSE AS  
20. 177-3035 I [1] HOSE AS  
21. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
22. 8T-4192 M [9] BOLT (M12X1.75X25-MM)  
23. 8T-4184 M [1] BOLT (M12X1.75X45-MM)  
24. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
25. 187-6238 I [1] HOSE AS  
26. 187-6239 I [1] HOSE AS  
27. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
28. 1P-4577 [8] FLANGE-HALF  
29. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
30. 3D-2824 [4] SEAL-O-RING  
31. 3E-7443 [2] TEE-UNION  
32. 4J-0520 [4] SEAL-O-RING  
33. 5K-9090 [4] SEAL-O-RING  
34. 5P-1076 [9] WASHER-HARD (13.5X30X4-MM THK)  
35. 5P-7468 [6] CLIP (SLOT)  
36. 5P-7469 [6] CLIP (TAB)  
37. 5P-8444 [6] GROMMET (37-MM ID)  
38. 6V-9007 [4] ELBOW  
39. 6V-9746 [8] SEAL-O-RING  
40. 6V-9854 [2] ELBOW (SWIVEL)  
41. 7G-3832 [4] GROMMET  
42. 7G-3833 [4] CLIP (TAB)  
43. 7G-3834 [4] CLIP (SLOT)  
44. 7X-0332 [2] BOLT (1/2-13X4.5-IN)  
45. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4133 M [8] NUT (M10X1.5-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog 950G II :

EDGE-CUTTING
500-1944 EDGE-CUTTING
EDGE-CUTTING
500-1942 EDGE-CUTTING
EDGE-CUTTING
500-1941 EDGE-CUTTING
EDGE-CUTTING
257-1910 EDGE-CUTTING
EDGE-CUTTING
223-8167 EDGE-CUTTING
107-3394 EDGE GP-SEGMENT
EDGE GP-CUTTING
141-8824 EDGE GP-CUTTING
EDGE GP-CUTTING
139-9229 EDGE GP-CUTTING
EDGE-END
223-8168 EDGE-END
447-0351 EDGE-END
447-0352 EDGE-END
EDGE-END
500-1943 EDGE-END
447-0350 EDGE-SEGMENT
257-1959 FORK AR-LOG & LUMBER
365-1316 FORK GP
FORK GP-LOG
157-3466 FORK GP-LOG

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.