AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

306-0358 BOX GP-BATTERY S/N CRD1-UP FIELD INSTALLATION 938G II WHEEL LOADER


FRAME AND BODY
BOX GP-BATTERY
COUNTERWEIGHT GP
DOOR GP
FENDER GP
FRAME GP

WHEEL LOADER 938G II WHEEL LOADER CRD
 938G II Wheel Loader CRD00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3498 938G II CRD   (2002)

FRAME AND BODY

BOX GP-BATTERY
BOX GP-BATTERY
306-0358 BOX GP-BATTERY
 

#SEBP34980480
 

306-0358: BOX GP-BATTERY

306-0358 BOX GP-BATTERY
S/N CRD1-UP
FIELD INSTALLATION
i03183620 SEBP3498
3060358 BOX GP-BATTERY Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 8V-0622 [1] CABLE AS-BATTERY  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [2] BOLT (5/16-18X1.375-IN)  
  1M-6120 [2] NUT (5/16-18-THD)  
  5P-0761 E CABLE (00-GA, RED)(14-CM)  
  8T-9757 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  9G-0003 [1] COVER AS-TERMINAL (BLACK)  
  9G-0004 [1] COVER AS-TERMINAL (RED)  
3. 153-5710 [2] BATTERY GP (12-VOLT, MAINTENANCE FREE, WET)  
4. 153-6281 [1] HOLD-DOWN-BATTERY  
5. 296-1063 [2] ROD  
6. 303-8539 [1] BOX AS (LH)  
  8T-3490 M [7] NUT-WELD (M10X1.5-THD)  
7. 305-8573 [1] COVER  
8. 215-2452 [1] PLATE (LH)  
9. 7X-7729 [9] WASHER (11X25X3-MM THK)  
10. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
13. 5P-7211 D SEAL (0.6-M)  
14. 5P-5637 D SEAL (0.6-M EACH)  
14A. 5P-5637 D SEAL (0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP34980481
 

138-1917: COUNTERWEIGHT GP

138-1917 COUNTERWEIGHT GP
S/N CRD1-UP
PART OF 220-3967, 220-3968 CONTROL AR-HIGH LIFT
AN ATTACHMENT
i00806130 SEBP3498
1381917 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-5796 [1] PIN-KEEPER  
2. 219-0017 [1] PIN-HITCH  
3. 133-5678 [1] COUNTERWEIGHT  
4. 7X-0633 [8] WASHER (34X64.5X4-MM THK)  
5. 7X-2581 M [2] BOLT (M30X3.5X100-MM)  
6. 7X-2583 M [2] BOLT (M30X3.5X120-MM)  
  M   METRIC PART
 

#SEBP34980482
 

134-9637: COUNTERWEIGHT GP-REAR

134-9637 COUNTERWEIGHT GP-REAR
S/N CRD1-UP
PART OF 199-2816, 259-1850 CHASSIS AR
i00511735 SEBP3498
1349637 COUNTERWEIGHT GP-REAR Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-5796 [1] PIN-KEEPER  
2. 219-0017 [1] PIN-HITCH  
3. 133-4849 [1] COUNTERWEIGHT  
4. 7X-0633 [8] WASHER (34X64.5X4-MM THK)  
5. 7X-2581 M [2] BOLT (M30X3.5X100-MM)  
6. 7X-2583 M [2] BOLT (M30X3.5X120-MM)  
  M   METRIC PART
 

#SEBP34980483
 

165-4586: DOOR GP-BATTERY

165-4586 DOOR GP-BATTERY
S/N CRD1-UP
PART OF 199-2816, 259-1850 CHASSIS AR
i00976668 SEBP3498
1654586 DOOR GP-BATTERY Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4610 [1] PIN-COTTER  
2. 170-3718 [1] COVER  
4. 5P-7211 BD SEAL  
5. 153-0150 [1] PLATE  
6. [1] ROD AS  
  8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
7. 170-3720 [1] COVER AS  
  106-9010 [1] HINGE  
8. 170-3717 [1] COVER AS  
9. 170-5770 [1] STEP AS  
10. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
11. 7X-7729 [16] WASHER (11X25X3-MM THK)  
12. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
14. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
15. 5P-5637 BD SEAL  
16. 5P-5649 BD SEAL-BULK  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP34980484
 

150-1743: EXTENSION GP-FENDER

150-1743 EXTENSION GP-FENDER
S/N CRD1-UP
AN ATTACHMENT
i00705615 SEBP3498
1501743 EXTENSION GP-FENDER Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-8177 [2] DEFLECTOR AS  
2. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
3. 8T-4133 M [8] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP34980485
 

126-9535: FENDER GP

126-9535 FENDER GP
S/N CRD1-UP
PART OF 199-2816, 259-1850 CHASSIS AR
i00516073 SEBP3498
1269535 FENDER GP Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-2752 [1] FENDER AS-FRONT (LH)  
2. 131-2753 [1] FENDER AS-FRONT (RH)  
3. 134-9454 [1] FENDER AS-REAR (RH)  
4. 134-9458 [1] FENDER AS-REAR (LH)  
5. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
6. 7X-7729 [12] WASHER (11X25X3-MM THK)  
7. 8T-4186 M [12] BOLT (M10X1.5X40-MM)  
8. 8T-4244 M [8] NUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP34980486
 

201-6761: FENDER GP

201-6761 FENDER GP
S/N CRD1-UP
AN ATTACHMENT
i01507976 SEBP3498
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  201-6775 [1] FENDER AS-FRONT (LH)  
  201-6777 [1] FENDER AS-REAR (LH)  
  201-6776 [1] FENDER AS-FRONT (RH)  
  201-6778 [1] FENDER AS-REAR (RH)  
 

#SEBP34980487
 

231-3728: FENDER GP-ROADING

231-3728 FENDER GP-ROADING
S/N CRD1-UP
AN ATTACHMENT
i01908998 SEBP3498
2313728 FENDER GP-ROADING Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [2] PIN  
2. 2Q-7980 [1] FENDER AS (RH)  
3. 2Q-7981 [1] FENDER AS (LH)  
4. 3B-2062 [2] PIN  
5. 3B-4615 [4] PIN-COTTER  
6. 4E-1384 [2] BUMPER-CONICAL  
7. 6W-5817 [2] SPRING  
8. 3E-3826 [2] END-YOKE ROD  
9. 132-1915 [1] EXTENSION  
10. 132-1916 [1] EXTENSION  
11. 132-1924 [1] SUPPORT AS-FENDER LATCH  
  9V-0334 [1] ANGLE  
12. 132-1925 [2] LATCH  
13. 132-1929 [1] SUPPORT AS-FENDER LATCH  
  9V-0334 [1] ANGLE  
14. 132-1931 [2] ROD AS  
15. 141-3869 [1] FENDER AS (RH)  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
16. 141-3870 [1] FENDER AS (LH)  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
17. 141-3871 Y [1] HINGE GP-ROADING FENDER (LH)  
18. 141-3872 Y [1] HINGE GP-ROADING FENDER (RH)  
19. 141-3873 [1] SUPPORT AS (RH)  
  6N-8863 [1] WASHER (10.2X32X2.5-MM THK)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
20. 141-3874 [2] GUIDE AS  
21. 141-3875 [1] COVER (LH)  
22. 141-3876 [1] COVER (RH)  
23. 141-3878 [1] SUPPORT AS (LH)  
  6N-8863 [1] WASHER (10.2X32X2.5-MM THK)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
24. 141-3880 [1] CHANNEL AS (RH)  
25. 141-3881 [1] CHANNEL AS (LH)  
26. 189-8319 [2] BLOCK  
27. 5C-7261 M [2] NUT (M8X1.25-THD)  
28. 7X-0608 [4] WASHER-HARD (10.2X16X2-MM THK)  
29. 7X-0618 [4] WASHER-HARD (13.5X40X5-MM THK)  
30. 7X-7729 [6] WASHER (11X25X3-MM THK)  
31. 7Y-9099 M [12] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
32. 8T-4121 [26] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [2] NUT (M10X1.5-THD)  
34. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
35. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
36. 8T-4186 M [12] BOLT (M10X1.5X40-MM)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 9X-2041 M [6] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP34980488
 

221-7054: FRAME AS-FRONT

221-7054 FRAME AS-FRONT
S/N CRD1-UP
PART OF 224-5588 SCRAP HANDLING AR, 221-8128, 240-2031, 240-2032, 259-1881, 259-1883 WASTE HANDLING AR
AN ATTACHMENT
i01946113 SEBP3498
2217054 FRAME AS-FRONT Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-2647 [2] BLOCK  
15. 106-7771 [1] PLATE  
23. 110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
24. 112-9073 M [13] STUD-WELD (M12X1.75X21.1-MM)  
26. 132-6964 [1] PLATE  
28. 4I-6289 [1] PLATE  
29. 7T-1099 [21] LINK  
30. 7X-0752 M [2] BOSS-WELD (M10X1.5X65-MM)  
31. 8T-3851 M [10] BOSS-WELD (M10X1.5X17.5-MM)  
32. 8T-4935 M [1] BOSS-WELD (M10X1.5X45-MM)  
33. 8T-4967 M [4] STUD-WELD (M10X1.5X23-MM)  
34. 9C-6809 M [2] BLOCK (M10X1.5-MM)  
35. 9C-7863 M [1] BLOCK (M12X1.75-MM)  
36. 9C-7929 [3] BLOCK  
37. 9R-2060 M [5] BOSS (M10X1.5X21-MM)  
38. 9X-8487 M [1] BOSS-WELD (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP34980489
 

199-3810: FRAME AS-LOADER

199-3810 FRAME AS-LOADER
S/N CRD1-597
PART OF 199-2816 CHASSIS AR
i01673473 SEBP3498
1993810 FRAME AS-LOADER Parts scheme
  For full view, you need register

Parts for your 938G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-2647 [2] BLOCK  
2. 092-1136 [1] BOSS (M10X1.5-THD)  
3. 106-7771 [1] PLATE  
4. 110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
5. 112-9073 M [17] STUD-WELD (M12X1.75X21.1-MM)  
6. 4I-6289 [1] PLATE  
7. 7T-1099 [15] LINK  
8. 7X-0752 M [2] BOSS-WELD (M10X1.5X65-MM)  
9. 8T-3851 M [11] BOSS-WELD (M10X1.5X17.5-MM)  
10. 9C-6809 M [2] BLOCK (M10X1.5-MM)  
11. 9C-7863 M [1] BLOCK (M12X1.75-MM)  
12. 9C-7929 [3] BLOCK  
13. 9R-2060 M [6] BOSS (M10X1.5X21-MM)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 938G II :

BAFFLE GP
183-4182 BAFFLE GP
ACTUATOR GP-POWER
305-8958 ACTUATOR GP-POWER
ACTUATOR GP-POWER
2Q-4181 ACTUATOR GP-POWER
ACTUATOR GP-POWER
221-7057 ACTUATOR GP-POWER
ACTUATOR GP-POWER
210-2613 ACTUATOR GP-POWER
VALVE GP-TRANSMISSION CONTROL
200-2049 VALVE GP-TRANSMISSION CONTROL
VALVE GP-TRANSMISSION CONTROL
200-2048 VALVE GP-TRANSMISSION CONTROL
VALVE GP-RELIEF
201-3322 VALVE GP-RELIEF
COUNTERWEIGHT GP
138-1917 COUNTERWEIGHT GP
COUNTERWEIGHT GP-REAR
134-9637 COUNTERWEIGHT GP-REAR
DOOR GP-BATTERY
165-4586 DOOR GP-BATTERY
EXTENSION GP-FENDER
150-1743 EXTENSION GP-FENDER
FENDER GP
126-9535 FENDER GP
201-6761 FENDER GP
FENDER GP-ROADING
231-3728 FENDER GP-ROADING
FRAME AS-FRONT
221-7054 FRAME AS-FRONT

Truck sale:

 
 
Caterpillar 938GII, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 938GII, Construction
58,000 
Caterpillar 938GII, Construction
- Wheel Loaders
ZIEGLER CAT
 
67,900 
Caterpillar 938GII, Construction
- Wheel Loaders
avspare
Caterpillar 938GII, Construction
57,500 
Caterpillar 938GII, Construction
- Wheel Loaders
ALTORFER INC.
Caterpillar 938GII, Construction
52,000 
Caterpillar 938GII, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.