201-8415 WIRING GP-MACHINE S/N CSX1-389 PART OF 199-2871 ELECTRICAL AR IT38G II INTEGRATED TOOLCARRIER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 201-8415 WIRING GP-
1. 201-8415 WIRING GP-
2. 201-8415 WIRING GP-
3. 235-8632 WIRING GP-
4. 229-2273 WIRING GP-
5. 201-8416 WIRING GP-
6. 201-8416 WIRING GP-
7. 201-8416 WIRING GP-
8. 201-8422 WIRING GP-

POWER TRAIN

AXLE GP

9. 129-4282 AXLE AR-FI
0. INFORMATION

INTEGRATED TOOLCARRIER IT38G II INTEGRATED TOOLCARRIER CSX
IT38G II Integrated Toolcarrier CSX00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3500 IT38G II CSX (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

215-1889 WIRING GP-LIGHTING

240-5961 WIRING GP-LIGHTING

201-8415 WIRING GP-MACHINE

235-8632 WIRING GP-MACHINE

#SEBP35000310

201-8415: WIRING GP-MACHINE

WIRING GP-MACHINE

201-8415 WIRING GP-MACHINE
S/N CSX1-389
PART OF 199-2871 ELECTRICAL AR

i01673488 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	7K-1181	[20]	STRAP-CABLE
3.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
4.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
5.	158-6634	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
6.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
7.	202-3245 Y	[1]	PANEL GP-CIRCUIT BREAKER
8.	202-3246	[1]	HARNESS AS-CHASSIS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	7K-1181	[1]	STRAP-CABLE
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1521	[2]	BELL AS-END
	8T-8737	[27]	PLUG-SEAL
	7G-7917	[5]	PLUG-SEAL
	7G-7918	[5]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	7G-7920	[1]	PLUG-SEAL
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
9.	205-0353	[2]	GROMMET
10.	130-5300	[6]	CLIP
11.	1S-0994	[3]	CLIP (LOOP)
12.	2M-3433	[2]	GROMMET
13.	4P-7581	[1]	CLIP (LADDER)
14.	4S-1962	[1]	CLIP (LOOP)
15.	4D-7388	[1]	CLIP (LOOP)
16.	5F-9757	[1]	GROMMET
17.	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
18.	6D-4244	[1]	CLIP (LOOP)
19.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4133 M	[1]	NUT (M10X1.5-THD)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
23.	8T-4222	[3]	WASHER-PLATED (11X32X2.5-MM THK)
24.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	8T-4244 M	[1]	NUT (M12X1.75-THD)
26.	3D-9872	[2]	PLUG-BUTTON
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35000311

201-8415: WIRING GP-MACHINE

WIRING GP-MACHINE

201-8415 WIRING GP-MACHINE
S/N CSX390-960
PART OF 199-2871 ELECTRICAL AR

i01987743 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	7K-1181 C	[22]	STRAP-CABLE
3.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
4.	146-0240	[1]	SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5.	158-6634 Y	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
6.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
7.	202-3245 Y	[1]	PANEL GP-CIRCUIT BREAKER
8.	234-0621 C	[1]	HARNESS AS-CHASSIS
	8N-1521	[2]	BELL AS-END
	8N-1523	[1]	LOCKWASHER
	9X-6856	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1542	[2]	PIN-CONNECTOR (10-GA)
	8N-1544	[1]	PIN-CONNECTOR (8-GA)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	207-5332	[2]	PIN-CONNECTOR (4-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[9]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	8T-8737	[27]	PLUG-SEAL
	7G-7917	[5]	PLUG-SEAL
	7G-7918	[5]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	7G-7920	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	114-8843 E	[1]	SLEEVE-PLASTIC (240-CM)
	114-8845 E	[1]	SLEEVE-PLASTIC (40-CM)
	9X-6857	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8N-1541	[4]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[38]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[8]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	7K-1181	[2]	STRAP-CABLE
	171-5349	[2]	STRAP-MARKER
	1P-0810 B		TAPE-ELECTRICAL
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	2L-8065	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8071	[3]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
9.	205-0353	[2]	GROMMET
10.	130-5300	[6]	CLIP
11.	1S-0994	[3]	CLIP (LOOP)
12.	2M-3433	[2]	GROMMET
13.	4P-7581	[1]	CLIP (LADDER)
14.	4S-1962	[1]	CLIP (LOOP)
15.	4D-7388	[1]	CLIP (LOOP)
16.	5F-9757	[1]	GROMMET
17.	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
18.	6D-4244	[1]	CLIP (LOOP)
19.	8T-4121	[9]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4133 M	[1]	NUT (M10X1.5-THD)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
23.	8T-4222	[3]	WASHER-PLATED (11X32X2.5-MM THK)
24.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	8T-4244 M	[1]	NUT (M12X1.75-THD)
26.	3D-9872	[2]	PLUG-BUTTON
27.	132-5789 C	[1]	CLIP (LADDER)
28.	7N-3718 C	[2]	CLIP
29.	218-4935	[1]	SUPPRESSOR-ARC
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35000312

201-8415: WIRING GP-MACHINE

WIRING GP-MACHINE

201-8415 WIRING GP-MACHINE
S/N CSX961-UP
PART OF 199-2871 ELECTRICAL AR

i05284666 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	7K-1181 C	[22]	STRAP-CABLE
3.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
4.	158-6634 Y	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
5.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
6.	202-3245 Y	[1]	PANEL GP-CIRCUIT BREAKER
7.	205-0353	[1]	GROMMET
8.	249-5492 C	[1]	GUARD-SWITCH
9.	259-1107 C	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	278-0457 C	[1]	HARNESS AS-CHASSIS
	8N-1521	[1]	BELL AS-END
	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	9X-3401	[19]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[19]	PIN-CONNECTOR (14-GA TO 16-GA)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[54]	PLUG-SEAL
	7G-7918	[1]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	7G-7920	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	113-0580	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	106-4155	[1]	KIT-RETAINING BOLT
			(INCLUDES BOLT, RING & SEALS)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	114-8843 E		SLEEVE-PLASTIC (300-CM)
	114-8845 E		SLEEVE-PLASTIC (20-CM)
	8N-1545	[1]	SOCKET-CONNECTOR (8-GA)
	9X-6857	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8N-1541	[4]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	8N-1549	[2]	SOCKET-CONNECTOR (4-GA)
	9X-3402	[44]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[44]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	7K-1181	[1]	STRAP-CABLE
	171-5349	[2]	STRAP-MARKER
	1P-0810 B		TAPE-ELECTRICAL
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8071	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8075	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
11.	130-5300 C	[9]	CLIP
12.	1S-0994	[3]	CLIP (LOOP)
13.	2M-3433	[2]	GROMMET
14.	3D-9872	[2]	PLUG-BUTTON
15.	4D-7388	[1]	CLIP (LOOP)
16.	4P-7581 C	[3]	CLIP (LADDER)
17.	4S-1962	[1]	CLIP (LOOP)
18.	5F-9757	[1]	GROMMET
19.	5P-1075	[3]	WASHER-HARD (10.2X22.5X3-MM THK)
20.	6D-4244	[1]	CLIP (LOOP)
21.	7N-3718	[2]	CLIP
22.	8T-4121 C	[11]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4133 M	[1]	NUT (M10X1.5-THD)
24.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
25.	8T-4137 CM	[9]	BOLT (M10X1.5X20-MM)
26.	8T-4222	[3]	WASHER-PLATED (11X32X2.5-MM THK)
27.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
28.	8T-4244 M	[1]	NUT (M12X1.75-THD)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35000313

235-8632: WIRING GP-MACHINE

WIRING GP-MACHINE

235-8632 WIRING GP-MACHINE
S/N CSX1-UP
AN ATTACHMENT

i02148732 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
2.	6I-1418	[3]	SPACER (8.2X12.7X28.7-MM THK)
3.	7K-1181	[7]	STRAP-CABLE
4.	8T-9655	[6]	MOUNT-ISOLATION
5.	156-6155	[1]	CONTROL GP-UNPROGRAMMED
	7X-6315	[1]	STRAP AS-GROUND
	134-4126	[1]	WASHER (4.52X8.28X0.76-MM THK)
	184-2472	[1]	SCREW-PAN HEAD (8-32X0.375-IN)
6.	165-5655	[1]	LAMP AS (24-VOLT)(LED)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
8.	206-5162	[2]	KEY AS-ELECTRONIC (SECURITY)
9.	206-5208	[1]	COIL AS (EXCITER)
	205-8257	[1]	COIL AS (EXCITER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	207-5271	[1]	WASHER (27X60.5X0.36-MM THK)
	5P-5677 D		WIRE (18-GA, BLACK)(0.4-M)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	213-1198 Y	[1]	ELECTRONICS GP-MACHINE (SECURITY)
11.	219-6314	[2]	KEY RING (IDENTIFICATION)
12.	235-0369	[1]	HARNESS AS-CONTROL (SECURITY)
	222-3870	[1]	COIL AS (FERRITE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
	5P-5677 D		WIRE (18-GA, BLACK)(0.4-M)
	126-1774	[1]	COVER-CONNECTOR
	150-6766	[1]	PLUG AS-CONNECTOR (26-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	8T-8737	[16]	PLUG-SEAL
	8T-8730	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	7K-1181	[3]	STRAP-CABLE
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
13.	099-3649 M	[3]	BOLT (M8X1.25X40-MM)
14.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
15.	9N-0869	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35000314

229-2273: WIRING GP-POWER GUARD

WIRING GP-POWER GUARD

229-2273 WIRING GP-POWER GUARD
S/N CSX1-UP
PART OF 227-4777 GUARD AR
AN ATTACHMENT

i01868046 SEBP3500

2292273 WIRING GP-POWER GUARD Parts scheme

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5M-6668	[2]	SCREW-MACHINE (8-32X0.75-IN)
2.	7K-1181	[21]	STRAP-CABLE
3.	155-4791	[1]	BRACKET AS
4.	157-1356	[1]	SWITCH AS-TOGGLE (MIDDLE BOTTOM GUARD ACTUATOR)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	9G-3695	[2]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5.	157-1364	[1]	SWITCH AS-TOGGLE (REAR BOTTOM GUARD ACTUATOR)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	229-2274	[1]	WIRE AS
7.	229-2276	[1]	HARNESS AS-CHASSIS (POWER GUARD)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
8.	130-5300	[1]	CLIP
9.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
10.	4B-2043	[2]	NUT (8-32-THD)
11.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
13.	9H-1958	[1]	CIRCUIT BREAKER GP (20-AMPERE)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
	M		METRIC PART

#SEBP35000315

201-8416: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

201-8416 WIRING GP-SECONDARY STEERING
S/N CSX1-366
PART OF 204-0835 STEERING AR-SECONDARY
AN ATTACHMENT

i01674193 SEBP3500

2018416 WIRING GP-SECONDARY STEERING Parts scheme

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
2.	3E-6450	[1]	SWITCH AS-PRESSURE (SECONDARY STEERING OIL)
2A.	3E-6450	[1]	SWITCH AS-PRESSURE (PRIMARY STEERING OIL)
			(EACH SWITCH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	3S-2093	[13]	STRAP-CABLE
4.	212-3413	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
6.	113-8449	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(193CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
7.	116-4491	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	122-0493	[1]	COVER
9.	145-1015	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
10.	162-9728	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
11.	189-5604	[1]	PLATE AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
12.	192-5017	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
13.	202-3247	[1]	HARNESS AS-STEERING (SECONDARY)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	8T-8737	[2]	PLUG-SEAL
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
14.	203-3694	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(26CM)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
15.	203-3697	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(30CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
16.	212-3415	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
17.	216-6940	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0695 E		CONDUIT (73CM)
	5P-0761 E		CABLE (00-GA, RED)(211CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
18.	130-5300	[2]	CLIP
19.	130-5301	[1]	CLIP
20.	1S-0994	[2]	CLIP (LOOP)
21.	205-7299	[8]	CLIP (LOOP)
22.	2A-2677	[3]	SPACER (10.7X17.14X19.05-MM THK)
23.	3K-0360	[2]	SEAL-O-RING
24.	5P-9085	[1]	CLIP (LOOP)
25.	5P-9297	[2]	CLIP (LOOP)
26.	7X-2552 M	[2]	BOLT (M16X2X30-MM)
27.	8M-2770	[1]	CLIP (LOOP)
28.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
30.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
31.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
32.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
33.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
34.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[1]	NUT (M12X1.75-THD)
36.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
37.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
38.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
39.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
40.	5P-5148	[1]	STRAP-CABLE
41.	5C-7261 M	[1]	NUT (M8X1.25-THD)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35000316

201-8416: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

201-8416 WIRING GP-SECONDARY STEERING
S/N CSX367-UP
PART OF 204-0835 STEERING AR-SECONDARY
Type 1
AN ATTACHMENT

i01974671 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
2.	230-5771 C	[1]	SWITCH AS-PRESSURE (SECONDARY STEERING OIL)
2A.	230-5771 C	[1]	SWITCH AS-PRESSURE (PRIMARY STEERING OIL)
			(EACH SWITCH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (30-CM)
3.	3S-2093	[13]	STRAP-CABLE
4.	212-3413	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
6.	113-8449	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(193-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
7.	116-4491	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	122-0493	[1]	COVER
9.	145-1015	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
10.	162-9728	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
11.	189-5604	[1]	PLATE AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
12.	192-5017	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
13.	202-3247	[1]	HARNESS AS-STEERING (SECONDARY)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
14.	203-3694	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(26-CM)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
15.	203-3697	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(30-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
16.	212-3415	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
17.	216-6940	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0695 E		CONDUIT (73-CM)
	5P-0761 E		CABLE (00-GA, RED)(211-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
18.	130-5300	[2]	CLIP
19.	130-5301	[1]	CLIP
20.	1S-0994	[2]	CLIP (LOOP)
21.	205-7299	[8]	CLIP (LOOP)
22.	2A-2677	[3]	SPACER (10.7X17.14X19.05-MM THK)
23.	3K-0360	[2]	SEAL-O-RING
24.	5P-9085	[1]	CLIP (LOOP)
25.	5P-9297	[2]	CLIP (LOOP)
26.	7X-2552 M	[2]	BOLT (M16X2X30-MM)
27.	8M-2770	[1]	CLIP (LOOP)
28.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
30.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
31.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
32.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
33.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
34.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[1]	NUT (M12X1.75-THD)
36.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
37.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
38.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
39.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
40.	5P-5148	[1]	STRAP-CABLE
41.	5C-7261 M	[1]	NUT (M8X1.25-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35000317

201-8416: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

201-8416 WIRING GP-SECONDARY STEERING
S/N CSX367-UP
PART OF 204-0835 STEERING AR-SECONDARY
Type 2
AN ATTACHMENT

i02373454 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
2.	230-5771	[1]	SWITCH AS-PRESSURE (SECONDARY STEERING OIL)
2A.	230-5771	[1]	SWITCH AS-PRESSURE (PRIMARY STEERING OIL)
			(EACH SWITCH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (30-CM)
3.	3S-2093	[13]	STRAP-CABLE
4.	212-3413	[1]	BRACKET AS
5.	8C-6358 C	[1]	BLOCK AS-JUNCTION (BATTERY)
	1D-5117	[3]	NUT-JAM (1/2-13-THD)
	8T-3519	[3]	BOLT-BRONZE (1/2-13X2-IN)
6.	113-8449	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(193-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
7.	116-4491	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	122-0493	[1]	COVER
9.	145-1015	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
10.	162-9728	[1]	BRACKET AS
11.	189-5604	[1]	PLATE AS
12.	192-5017	[1]	BRACKET AS
13.	202-3247	[1]	HARNESS AS-STEERING (SECONDARY)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
14.	203-3694	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(26-CM)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
15.	203-3697	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(30-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
16.	212-3415	[1]	BRACKET AS
17.	216-6940	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0695 E		CONDUIT (73-CM)
	5P-0761 E		CABLE (00-GA, RED)(211-CM)
	8N-0869	[2]	COVER-TERMINAL (RED)
18.	130-5300	[2]	CLIP
19.	130-5301	[1]	CLIP
20.	1S-0994	[2]	CLIP (LOOP)
21.	205-7299	[8]	CLIP (LOOP)
22.	2A-2677	[3]	SPACER (10.7X17.14X19.05-MM THK)
23.	3K-0360	[2]	SEAL-O-RING
24.	5P-9085	[1]	CLIP (LOOP)
25.	5P-9297	[2]	CLIP (LOOP)
26.	7X-2552 M	[2]	BOLT (M16X2X30-MM)
27.	8M-2770	[1]	CLIP (LOOP)
28.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
30.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
31.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
32.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
33.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
34.	8T-4223	[9]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4244 M	[1]	NUT (M12X1.75-THD)
36.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
37.	9X-8267	[1]	WASHER (6.6X12X2-MM THK)
38.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
39.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
40.	5P-5148	[1]	STRAP-CABLE
41.	5C-7261 M	[1]	NUT (M8X1.25-THD)
42.	6V-8188	[6]	NUT (1/2-13-THD)
43.	218-4935	[1]	SUPPRESSOR-ARC
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35000318

201-8422: WIRING GP-TRACTION CONTROL

WIRING GP-TRACTION CONTROL

201-8422 WIRING GP-TRACTION CONTROL
S/N CSX1-UP
PART OF 201-8909 CONTROL AR-TRACTION, 221-8179 CONVERSION AR-TRACTION CONTROL
AN ATTACHMENT

i01681118 SEBP3500

2018422 WIRING GP-TRACTION CONTROL Parts scheme

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4J-9448	[3]	LUG
2.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
3.	6V-8211 M	[3]	BOLT (M6X1X55-MM)
4.	7K-1181	[17]	STRAP-CABLE
5.	8C-5607	[6]	MOUNT-ISOLATION
6.	8C-5608	[3]	SPACER (6.5X9.5X25.4-MM THK)
7.	8T-6431	[2]	ROD END
8.	8T-9655	[8]	MOUNT-ISOLATION
9.	9R-5383	[1]	BOSS
10.	109-7078	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
11.	109-7079	[2]	GUARD AS
12.	109-7080	[2]	GUARD AS
13.	109-7330 Y	[4]	SENSOR GP-SPEED (WHEEL)
14.	5P-9297	[2]	CLIP (LOOP)
15.	119-4167	[1]	ROD
16.	141-7552 J	[1]	PLUG AS
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
17.	141-7553	[1]	PLUG AS
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
18.	141-9817	[1]	GUARD AS
19.	152-3764	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
20.	152-7356	[1]	LEVER
21.	219-2386 Y	[1]	SENSOR GP-POSITION (ARTICULATION ANGLE)
22.	166-2232	[1]	SEAL-LIP TYPE
23.	168-0402	[1]	HOUSING
24.	172-9391 Y	[1]	CONTROL GP-UNPROGRAMMED (TRACTION CONTROL SYSTEM)
25.	193-8532	[1]	SHAFT
26.	202-3250	[1]	HARNESS AS-CONTROL (TRACTION-MAIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	8T-8737	[53]	PLUG-SEAL
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
27.	202-3251	[1]	HARNESS AS-CONTROL (TRACTION-REAR AXLE)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
28.	202-3252	[1]	HARNESS AS-CONTROL (TRACTION-FRONT AXLE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
29.	099-3649 M	[4]	BOLT (M8X1.25X40-MM)
30.	124-3019	[2]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
31.	130-5300	[3]	CLIP
32.	132-5789	[1]	CLIP (LADDER)
33.	2D-0388	[1]	GROMMET (25.4-MM ID)
34.	2H-3429	[1]	RING-RETAINING
35.	2H-9524	[2]	GROMMET
36.	2L-6726	[2]	RING-RETAINING
37.	3K-0360	[4]	SEAL-O-RING
38.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
39.	4D-7794	[2]	CLIP
40.	4D-8123	[2]	CLIP
41.	4K-8864	[2]	CLIP (LOOP)
42.	5K-4778	[1]	CLIP
43.	5P-9085	[2]	CLIP (LOOP)
44.	6D-3025	[2]	BALL BEARING
45.	6V-0894	[1]	SEAL-O-RING
46.	6V-2313 M	[2]	BOLT (M5X0.8X30-MM)
47.	8M-2770	[1]	CLIP (LOOP)
48.	8M-2773	[2]	CLIP (LOOP)
49.	8T-4121	[18]	WASHER-HARD (11X21X2.5-MM THK)
50.	8T-4133 M	[3]	NUT (M10X1.5-THD)
51.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
52.	8T-4137 M	[10]	BOLT (M10X1.5X20-MM)
53.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
54.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
55.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
56.	8T-4192 M	[12]	BOLT (M12X1.75X25-MM)
57.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
58.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
59.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
60.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
61.	8T-5387	[2]	GROMMET
62.	9M-8406	[2]	CLIP (LOOP)
63.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
64.	9X-6165	[3]	WASHER (6.5X22X2.5-MM THK)
	J		FOR IT38G MODEL ONLY
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP35000319

129-4282: AXLE AR-FIXED

AXLE AR-FIXED

129-4282 AXLE AR-FIXED -FRONT, LIMITED SLIP DIFFERENTIAL
S/N CSX1-UP
AN ATTACHMENT

i04802860 SEBP3500

For full view, you need register

Parts for your IT38G II INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
129-4289 Y	[2]	BRAKE & PLANETARY GP
372-4769 CY	[1]	DIFFERENTIAL GP-LIMITED SLIP
129-4290 Y	[1]	GEAR GP-BEVEL & PINION
129-4291 Y	[1]	HOUSING GP-FIXED AXLE
C		CHANGE FROM PREVIOUS TYPE
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Specifications

Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Testing and Adjusting

Electric Starting System - Test
3126B Engines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
3126B Engine for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines

How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines

CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Shutdown Switch Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Wiring Information
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21