AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

146-7970 LINES GP-COUPLER S/N WMB1-UP PART OF 241-1050 CONVERSION AR-HYDRAULIC Type 1 CANNOT BE USED WITH @@@@@148-7680@@@@@, @@@@@154-4920@@@@@, (HIGH LIFT) AN ATTACHMENT 924GZ


HYDRAULIC SYSTEM
CYLINDER GP

WHEEL LOADER 924GZ WHEEL LOADER WGX
 924G 924Gz Wheel Loader WGX00001-UP (MACHINE) POWERED BY 3056E Engine SEBP3525 924GZ WGX   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT
152-5306 CYLINDER GP-TILT
CYLINDER GP-TILT
268-9437 CYLINDER GP-TILT
LINES GP-COUPLER
146-7970 LINES GP-COUPLER
LINES GP-COUPLER
146-7970 LINES GP-COUPLER
LINES GP-COUPLER
154-4920 LINES GP-COUPLER
LINES GP-COUPLER
154-4920 LINES GP-COUPLER
 

#SEBP35250530
 

146-7970: LINES GP-COUPLER

146-7970 LINES GP-COUPLER
S/N WMB1-UP
PART OF 241-1050 CONVERSION AR-HYDRAULIC
Type 1
CANNOT BE USED WITH @@@@@148-7680@@@@@, @@@@@154-4920@@@@@, (HIGH LIFT)
AN ATTACHMENT
i01143020 SEBP3525
1467970 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-3491 [2] ELBOW  
2. 122-7272 [2] BLOCK  
3. 146-7967 [1] PLATE AS  
4. 146-7968 [1] PLATE AS  
5. 146-7969 I [2] HOSE AS  
6. 172-4620 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [2] SEAL-O-RING  
  6Y-2349 [1] CONNECTOR  
7. 195-6525 [1] FITTING AS (QUICK DISCONNECT, FEMALE)  
8. 195-6526 [1] FITTING AS (QUICK DISCONNECT, MALE)  
9. 195-9877 [1] CAP-DUST  
10. 195-9878 [1] CAP-DUST  
11. 148-8347 [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
12. 148-8410 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
13. 3D-2824 [2] SEAL-O-RING  
14. 5P-7466 [4] CLIP (SLOT)  
15. 5P-7467 [4] CLIP (TAB)  
16. 5P-8112 [4] GROMMET  
17. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
19. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
20. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP35250531
 

146-7970: LINES GP-COUPLER

146-7970 LINES GP-COUPLER
S/N WMB1-UP
PART OF 241-1050 CONVERSION AR-HYDRAULIC
Type 2
CANNOT BE USED WITH @@@@@148-7680@@@@@, @@@@@154-4920@@@@@, (HIGH LIFT)
AN ATTACHMENT
i01974879 SEBP3525
1467970 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-6525 [1] FITTING AS (QUICK DISCONNECT, FEMALE)  
2. 195-6526 [1] FITTING AS (QUICK DISCONNECT, MALE)  
3. 152-5717 [1] CAP-DUST  
4. 152-5718 [1] CAP-DUST  
5. 213-5065 C [2] BRACKET  
6. 216-6969 CI [2] HOSE AS  
7. 148-8455 C [2] UNION AS  
    (EACH INCLUDES)
  6V-8997 [1] UNION  
  6V-9746 [2] SEAL-O-RING  
8. 171-6725 C [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  8T-6451 [1] ELBOW  
9. 2P-1293 C [2] LOCKNUT (1-3/16-12-THD)  
10. 5P-7466 [4] CLIP (SLOT)  
11. 5P-7467 [4] CLIP (TAB)  
12. 5P-8112 [4] GROMMET  
13. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 8T-4196 CM [4] BOLT (M10X1.5X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP35250532
 

154-4920: LINES GP-COUPLER

154-4920 LINES GP-COUPLER
S/N WMB1-UP
Type 1
CANNOT BE USED WITH @@@@@148-7680@@@@@, @@@@@146-7970@@@@@, (HIGH LIFT)
AN ATTACHMENT
i01146967 SEBP3525
1544920 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-3491 [2] ELBOW  
2. 122-7272 [2] BLOCK  
3. 146-7967 [1] PLATE AS  
4. 146-7968 [1] PLATE AS  
5. 154-4921 I [2] HOSE AS  
6. 172-4620 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [2] SEAL-O-RING  
  6Y-2349 [1] CONNECTOR  
7. 195-6525 [1] FITTING AS (QUICK DISCONNECT, FEMALE)  
8. 195-6526 [1] FITTING AS (QUICK DISCONNECT, MALE)  
9. 195-9877 [1] CAP-DUST  
10. 195-9878 [1] CAP-DUST  
11. 148-8347 [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
12. 148-8410 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
13. 3D-2824 [2] SEAL-O-RING  
14. 5P-7466 [4] CLIP (SLOT)  
15. 5P-7467 [4] CLIP (TAB)  
16. 5P-8112 [4] GROMMET (30MM ID)  
17. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
19. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
20. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP35250533
 

154-4920: LINES GP-COUPLER

154-4920 LINES GP-COUPLER
S/N WMB1-UP
Type 2
CANNOT BE USED WITH @@@@@148-7680@@@@@, @@@@@146-7970@@@@@, (HIGH LIFT)
AN ATTACHMENT
i02007080 SEBP3525
1544920 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-6525 [1] FITTING AS (QUICK DISCONNECT, FEMALE)  
2. 195-6526 [1] FITTING AS (QUICK DISCONNECT, MALE)  
3. 152-5717 [1] CAP-DUST  
4. 152-5718 [1] CAP-DUST  
5. 213-5065 C [2] BRACKET  
6. 216-6970 CI [2] HOSE AS  
7. 148-8455 C [2] UNION AS  
    (EACH INCLUDES)
  6V-8997 [1] UNION  
  6V-9746 [2] SEAL-O-RING  
8. 171-6725 C [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  8T-6451 [1] ELBOW  
9. 2P-1293 C [2] LOCKNUT (1-3/16-12-THD)  
10. 5P-7466 [4] CLIP (SLOT)  
11. 5P-7467 [4] CLIP (TAB)  
12. 5P-8112 [4] GROMMET  
13. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP35250534
 

217-2771: LINES GP-COUPLER

217-2771 LINES GP-COUPLER -STANDARD LIFT MACHINES
S/N WMB1-UP
PART OF 218-5113, 227-5050 COUPLER AR-QUICK
AN ATTACHMENT
i01820120 SEBP3525
2172771 LINES GP-COUPLER Parts scheme 2172771 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-4778 [2] CLIP  
2. 7K-1181 [2] STRAP-CABLE  
3. 169-9049 I [1] HOSE AS  
4. 176-7558 I [1] HOSE AS  
5. 180-2387 [1] TUBE AS  
6. 180-2388 [1] TUBE AS  
7. 186-0357 [3] CLIP  
8. 186-0359 [1] CLIP  
9. 192-7625 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
10. 193-4750 Y [1] MANIFOLD GP-CONTROL (QUICK COUPLER)  
11. 195-8673 [1] PLATE AS  
12. 200-1898 [1] SUPPRESSOR-ARC  
13. 160-2247 [1] SLEEVE-ABRASION  
14. 211-5875 I [1] HOSE AS  
15. 211-5877 I [1] HOSE AS  
16. 214-5389 I [1] HOSE AS  
17. 214-5390 I [1] HOSE AS  
18. 217-2768 I [1] HOSE AS  
19. 217-2769 I [2] HOSE AS  
20. 148-8325 [7] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
21. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
22. 148-8368 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
23. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
24. 150-5968 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [2] SEAL-O-RING  
  6V-9835 [1] TEE  
25. 174-5907 [4] CLIP (LOOP)  
26. 3P-5903 [4] CLIP (TAB)  
27. 3P-5904 [4] CLIP (SLOT)  
28. 4J-5477 [4] SEAL-O-RING  
29. 4P-8134 [1] CLIP (LADDER)  
30. 6D-3479 [7] CLIP (LOOP)  
31. 6K-8178 [1] CLIP (LOOP)  
32. 6V-8554 [1] NUT (13/16-16-THD)  
33. 7D-7233 [2] CLIP (LOOP)  
34. 7X-7729 [16] WASHER (11X25X3-MM THK)  
35. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [12] BOLT (M10X1.5X20-MM)  
38. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
39. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
40. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35250535
 

217-2771: LINES GP-COUPLER

217-2771 LINES GP-COUPLER -STANDARD LIFT MACHINES
S/N WMB1-807
PART OF 218-5113, 227-5050 COUPLER AR-QUICK
AN ATTACHMENT
i01970310 SEBP3525
2172771 LINES GP-COUPLER Parts scheme 2172771 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-4778 [2] CLIP  
2. 7K-1181 [2] STRAP-CABLE  
3. 169-9049 I [1] HOSE AS  
4. 176-7558 I [1] HOSE AS  
5. 223-8185 C [1] TUBE AS  
6. 223-8186 C [1] TUBE AS  
7. 186-0357 [3] CLIP  
8. 186-0359 [1] CLIP  
9. 192-7625 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
10. 193-4750 Y [1] MANIFOLD GP-CONTROL (QUICK COUPLER)  
11. 195-8673 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
12. 200-1898 [1] SUPPRESSOR-ARC  
13. 160-2247 BG SLEEVE-ABRASION  
14. 223-8187 CI [1] HOSE AS  
15. 223-8188 CI [1] HOSE AS  
16. 214-5389 I [1] HOSE AS  
17. 214-5390 I [1] HOSE AS  
18. 217-2768 I [1] HOSE AS  
19. 217-2769 I [2] HOSE AS  
20. 148-8325 [7] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
21. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
22. 148-8368 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
23. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
24. 150-5968 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [2] SEAL-O-RING  
  6V-9835 [1] TEE  
25. 174-5907 [4] CLIP (LOOP)  
26. 3P-5903 [4] CLIP (TAB)  
27. 3P-5904 [4] CLIP (SLOT)  
28. 4J-5477 [4] SEAL-O-RING  
29. 4P-8134 [1] CLIP (LADDER)  
30. 6D-3479 C [6] CLIP (LOOP)  
31. 6K-8178 C [2] CLIP (LOOP)  
32. 6V-8554 [1] NUT (13/16-16-THD)  
33. 7D-7233 [2] CLIP (LOOP)  
34. 7X-7729 [16] WASHER (11X25X3-MM THK)  
35. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [12] BOLT (M10X1.5X20-MM)  
38. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
39. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
40. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
42. 8T-4244 CM [1] NUT (M12X1.75-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35250536
 

217-2771: LINES GP-COUPLER

217-2771 LINES GP-COUPLER -STANDARD LIFT MACHINES
S/N WMB808-UP
PART OF 218-5113, 227-5050 COUPLER AR-QUICK
AN ATTACHMENT
i02334115 SEBP3525
2172771 LINES GP-COUPLER Parts scheme 2172771 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 7K-1181 [2] STRAP-CABLE  
3. 169-9049 I [1] HOSE AS  
4. 176-7558 I [1] HOSE AS  
5. 223-8185 [1] TUBE AS  
6. 223-8186 [1] TUBE AS  
7. 186-0357 [3] CLIP  
8. 186-0359 [1] CLIP  
9. 192-7625 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
10. 233-2549 CY [1] MANIFOLD GP-CONTROL (QUICK COUPLER)  
11. 195-8673 [1] PLATE AS  
12. 200-1898 [1] SUPPRESSOR-ARC  
13. 160-2247 [1] SLEEVE-ABRASION  
14. 223-8187 I [1] HOSE AS  
15. 223-8188 I [1] HOSE AS  
16. 214-5389 I [1] HOSE AS  
17. 214-5390 I [1] HOSE AS  
18. 217-2768 I [1] HOSE AS  
19. 217-2769 I [2] HOSE AS  
20. 148-8325 [7] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
21. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
22. 148-8368 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
23. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
24. 150-5968 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [2] SEAL-O-RING  
  6V-9835 [1] TEE  
25. 174-5907 [4] CLIP (LOOP)  
26. 3P-5903 [4] CLIP (TAB)  
27. 3P-5904 [4] CLIP (SLOT)  
28. 4J-5477 [4] SEAL-O-RING  
29. 4P-8134 [1] CLIP (LADDER)  
30. 6D-3479 [8] CLIP (LOOP)  
31. 6K-8178 [2] CLIP (LOOP)  
32. 9X-6582 [1] NUT (13/16-16-THD)  
33. 7D-7233 [2] CLIP (LOOP)  
34. 7X-7729 [16] WASHER (11X25X3-MM THK)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [14] BOLT (M10X1.5X20-MM)  
38. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
39. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
40. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
42. 8T-4244 M [1] NUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35250537
 

217-2772: LINES GP-COUPLER

217-2772 LINES GP-COUPLER -STANDARD LIFT MACHINES, WIDE
S/N WMB1-UP
PART OF 218-5115 COUPLER AR-QUICK
AN ATTACHMENT
i01820820 SEBP3525
2172772 LINES GP-COUPLER Parts scheme 2172772 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-4778 [2] CLIP  
2. 7K-1181 [2] STRAP-CABLE  
3. 169-9049 I [1] HOSE AS  
4. 176-7558 I [1] HOSE AS  
5. 180-2387 [1] TUBE AS  
6. 180-2388 [1] TUBE AS  
7. 186-0357 [3] CLIP  
8. 186-0359 [1] CLIP  
9. 192-7625 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
10. 193-4750 Y [1] MANIFOLD GP-CONTROL (QUICK COUPLER)  
11. 195-8673 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
12. 196-9560 I [1] HOSE AS  
13. 196-9994 [1] UNION AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8736 [1] UNION  
14. 198-8064 I [1] HOSE AS  
15. 200-1898 [1] SUPPRESSOR-ARC  
16. 160-2247 [1] SLEEVE-ABRASION  
17. 216-2907 I [1] HOSE AS  
18. 216-2908 I [1] HOSE AS  
19. 217-2768 I [1] HOSE AS  
20. 217-2769 I [2] HOSE AS  
21. 148-8325 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
22. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
23. 148-8368 [6] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
24. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
25. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
26. 150-5968 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [2] SEAL-O-RING  
  6V-9835 [1] TEE  
27. 174-5907 [4] CLIP (LOOP)  
28. 3P-5903 [2] CLIP (TAB)  
29. 3P-5904 [2] CLIP (SLOT)  
30. 4J-5477 [4] SEAL-O-RING  
31. 4P-8134 [1] CLIP (LADDER)  
32. 6D-3479 [6] CLIP (LOOP)  
33. 6V-8554 [1] NUT (13/16-16-THD)  
34. 7D-7233 [2] CLIP (LOOP)  
35. 7X-7729 [12] WASHER (11X25X3-MM THK)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [2] NUT (M10X1.5-THD)  
38. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
40. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
41. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35250538
 

217-2772: LINES GP-COUPLER

217-2772 LINES GP-COUPLER -STANDARD LIFT MACHINES, WIDE
S/N WMB1-807
PART OF 218-5115 COUPLER AR-QUICK
AN ATTACHMENT
i01970421 SEBP3525
2172772 LINES GP-COUPLER Parts scheme 2172772 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-4778 [2] CLIP  
2. 7K-1181 [2] STRAP-CABLE  
3. 169-9049 I [1] HOSE AS  
4. 176-7558 I [1] HOSE AS  
5. 223-8185 C [1] TUBE AS  
6. 223-8186 C [1] TUBE AS  
7. 186-0357 [3] CLIP  
8. 186-0359 [1] CLIP  
9. 192-7625 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
10. 193-4750 Y [1] MANIFOLD GP-CONTROL (QUICK COUPLER)  
11. 195-8673 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
12. 196-9560 I [1] HOSE AS  
13. 196-9994 [1] UNION AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8736 [1] UNION  
14. 198-8064 I [1] HOSE AS  
15. 200-1898 [1] SUPPRESSOR-ARC  
16. 160-2247 [1] SLEEVE-ABRASION  
17. 223-8189 CI [1] HOSE AS  
18. 223-8190 CI [1] HOSE AS  
19. 217-2768 I [1] HOSE AS  
20. 217-2769 I [2] HOSE AS  
21. 148-8325 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
22. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
23. 148-8368 [6] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
24. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
25. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
26. 150-5968 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [2] SEAL-O-RING  
  6V-9835 [1] TEE  
27. 174-5907 [4] CLIP (LOOP)  
28. 3P-5903 [2] CLIP (TAB)  
29. 3P-5904 [2] CLIP (SLOT)  
30. 4J-5477 [4] SEAL-O-RING  
31. 4P-8134 [1] CLIP (LADDER)  
32. 6D-3479 [6] CLIP (LOOP)  
33. 6V-8554 [1] NUT (13/16-16-THD)  
34. 7D-7233 [2] CLIP (LOOP)  
35. 7X-7729 [12] WASHER (11X25X3-MM THK)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [2] NUT (M10X1.5-THD)  
38. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
40. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
41. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
43. 8T-4244 CM [1] NUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35250539
 

217-2772: LINES GP-COUPLER

217-2772 LINES GP-COUPLER -STANDARD LIFT MACHINES, WIDE
S/N WMB808-UP
PART OF 218-5115 COUPLER AR-QUICK
Type 1
AN ATTACHMENT
i02334119 SEBP3525
2172772 LINES GP-COUPLER Parts scheme 2172772 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 924GZ WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-4778 [2] CLIP  
2. 7K-1181 [2] STRAP-CABLE  
3. 169-9049 I [1] HOSE AS  
4. 176-7558 I [1] HOSE AS  
5. 223-8185 [1] TUBE AS  
6. 223-8186 [1] TUBE AS  
7. 186-0357 [3] CLIP  
8. 186-0359 [1] CLIP  
9. 192-7625 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
10. 233-2549 CY [1] MANIFOLD GP-CONTROL (QUICK COUPLER)  
11. 195-8673 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
12. 196-9560 I [1] HOSE AS  
13. 196-9994 [1] UNION AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8736 [1] UNION  
14. 198-8064 I [1] HOSE AS  
15. 200-1898 [1] SUPPRESSOR-ARC  
16. 160-2247 [1] SLEEVE-ABRASION  
17. 223-8189 I [1] HOSE AS  
18. 223-8190 I [1] HOSE AS  
19. 217-2768 I [1] HOSE AS  
20. 217-2769 I [2] HOSE AS  
21. 148-8325 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
22. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
23. 148-8368 [6] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
24. 148-8419 [1] REDUCER AS  
  4J-5477 [1] SEAL-O-RING  
  6V-8935 [1] REDUCER  
25. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
26. 150-5968 [2] TEE AS  
    (EACH INCLUDES)
  4J-5477 [2] SEAL-O-RING  
  6V-9835 [1] TEE  
27. 174-5907 [4] CLIP (LOOP)  
28. 3P-5903 [2] CLIP (TAB)  
29. 3P-5904 [2] CLIP (SLOT)  
30. 4J-5477 [4] SEAL-O-RING  
31. 4P-8134 [1] CLIP (LADDER)  
32. 6D-3479 [6] CLIP (LOOP)  
33. 6V-8554 [1] NUT (13/16-16-THD)  
34. 7D-7233 [2] CLIP (LOOP)  
35. 7X-7729 [12] WASHER (11X25X3-MM THK)  
36. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4133 M [2] NUT (M10X1.5-THD)  
38. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
39. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
40. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
41. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 8T-5436 M [2] BOLT (M10X1.5X130-MM)  
43. 8T-4244 M [1] NUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 924GZ :

LINES GP-CONNECTING
223-0522 LINES GP-CONNECTING
LINES GP-BUCKET
281-1595 LINES GP-BUCKET
KICKOUT & POSITIONER GP
218-9937 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
218-9937 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
218-9937 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
148-7678 KICKOUT & POSITIONER GP
303-2056 HYDRAULIC AR-4 VALVE
303-2053 HYDRAULIC AR-4 VALVE
LINES GP-COUPLER
146-7970 LINES GP-COUPLER
LINES GP-COUPLER
154-4920 LINES GP-COUPLER
LINES GP-COUPLER
154-4920 LINES GP-COUPLER
LINES GP-COUPLER
217-2771 LINES GP-COUPLER
LINES GP-COUPLER
217-2771 LINES GP-COUPLER
LINES GP-COUPLER
217-2771 LINES GP-COUPLER
LINES GP-COUPLER
217-2772 LINES GP-COUPLER
LINES GP-COUPLER
217-2772 LINES GP-COUPLER

Truck sale:

Caterpillar 924GZ
 
Caterpillar 924GZ
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 924GZ, Wheel Loaders, Construction
 
Caterpillar 924GZ, Wheel Loaders, Construction
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 924GZ
 
Caterpillar 924GZ
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 924GZ
 
Caterpillar 924GZ
- Wheel Loaders
ALTORFER INDUSTRIES
Caterpillar 924GZ
 
Caterpillar 924GZ
- Wheel Loaders
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.