AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

193-1176 BOX GP-INSTRUMENT PANEL S/N PTM1-UP AN ATTACHMENT 3512B GENERATOR SET


OPERATOR STATION
PANEL GP
CONTROL GP-EMCP ELECTRONIC

GENERATOR SET 3512B GENERATOR SET PTM
 3512B Generator Set Oil Field Land Rig PTM00001-UP SEBP3555 3512B PTM   (2001)

OPERATOR STATION

PANEL GP
BOX GP-INSTRUMENT PANEL
126-7157 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
162-7662 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
193-1176 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
381-7675 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
381-7675 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
382-1791 BOX GP-INSTRUMENT PANEL
 

#SEBP35551010
 

193-1176: BOX GP-INSTRUMENT PANEL

193-1176 BOX GP-INSTRUMENT PANEL
S/N PTM1-UP
AN ATTACHMENT
i01523510 SEBP3555
1931176 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4480 [1] BOOT-SWITCH  
2. 7U-4891 [16] SCREW (10-32X1-IN)  
3. 8C-6024 [2] SEAL-CONNECTOR  
4. 8C-6123 [1] NUT (1/4-40-THD)  
5. 9X-1365 [1] SEAL-CONNECTOR  
6. 9X-6772 B [3] STRAP-CABLE  
7. 100-5566 [4] BEZEL  
8. 112-3588 [1] PLATE  
9. 113-7884 [1] FILM-IDENTIFICATION (ENGINE MONITORING)  
10. 123-9694 [1] HORN  
11. 126-2210 [1] HARNESS AS-PANEL (CUSTOMER CONNECTION)  
12. 150-4536 [1] FILM-CONTROL PANEL (IDENTIFICATION)  
13. 165-4099 Y [1] CONTROL GP-ENGINE MONITORING  
14. 166-6929 Y [1] MODULE GP-QUAD GAUGE  
15. 166-6936 Y [1] MODULE GP-QUAD GAUGE  
16. 166-6937 Y [1] MODULE GP-QUAD GAUGE  
17. 193-1174 [1] BOX AS  
  2W-9513 M [6] BOLT (M6X1X10-MM)  
  3B-4605 [4] PIN-COTTER  
  9P-6895 [4] PIN  
  9X-6381 [4] WASHER (6.5X12.5X1.6-MM THK)  
  126-8472 E SEAL (230-CM)  
  128-2507 [3] HINGE AS  
18. 193-1178 [1] HARNESS AS-PANEL (INSTRUMENT PANEL)  
19. 195-9598 [1] DOOR AS  
  128-8545 [2] LATCH AS  
20. 200-5008 [1] PLATE  
21. 200-5010 [1] GASKET  
22. 200-8660 [1] FILM-CONTROL PANEL  
23. 2N-3476 [12] SCREW-MACHINE (6-32X0.75-IN)  
24. 4B-2041 [12] NUT (6-32-THD)  
25. 4B-4274 [16] WASHER (5.5X13X1.2-MM THK)  
26. 4B-4863 [12] WASHER (4.7X11X1.2-MM THK)  
27. 5C-2890 M [2] NUT (M6X1-THD)  
28. 6V-8378 [16] NUT (10-32-THD)  
29. 7N-8008 [1] SWITCH AS-TOGGLE (CLEAR, MODE)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
30. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE PARAMETER, RH, LH)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
31. 8N-0694 [1] SWITCH AS-TOGGLE (SINGLE POLE)(SCROLL)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
32. 8T-6411 M [2] SCREW-MACHINE (M6X1X12-MM)  
33. 9D-2734 [1] GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35551011
 

381-7675: BOX GP-INSTRUMENT PANEL

381-7675 BOX GP-INSTRUMENT PANEL -LAND DRILLING
S/N PTM1-UP
Type 1
AN ATTACHMENT
i05009957 SEBP3555
3817675 BOX GP-INSTRUMENT PANEL Parts scheme 3817675 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5503 [3] BAR-FIXED BRIDGE  
2. 4W-3595 [2] MOUNT  
3. 9Y-8419 [2] FUSE (12-AMPERE)  
4. 103-6272 [1] SEAL  
5. 115-1322 [133] TERMINAL (DOUBLE)  
6. 131-4891 [8] GASKET  
7. 166-6161 [2] DUCT-WIRE  
8. 166-6162 [1] DUCT-WIRE  
9. 173-5413 [2] CLAMP  
10. 179-8828 [3] BASE-RELAY (2-POLE)  
11. 179-8829 [3] RELAY (2-POLE, 24-VOLT)  
12. 205-9470 [8] MOUNT-FLEXIBLE  
13. 225-6827 [1] GASKET  
14. 234-5925 [1] GASKET  
15. 235-2761 [1] GASKET  
16. 238-6266 [1] CABLE AS  
  277-5662 [1] TERMINAL  
17. 270-2679 [1] LOCKWASHER  
18. 272-5835 [3] FUSE (0.5-AMPERE)  
19. 275-2081 Y [1] GAUGE GP-COOLANT TEMPERATURE (ENGINE)  
20. 275-2086 Y [1] GAUGE GP-FUEL PRESSURE (INDICATORS)  
21. 275-2096 Y [1] GAUGE GP-ENGINE OIL PRESSURE  
22. 275-2098 Y [1] GAUGE GP-ENGINE OIL TEMP (ENGINE)  
23. 275-2100 Y [1] GAUGE GP-ENGINE PERCENT LOAD  
24. 275-2110 Y [1] VOLTMETER GP (DATA LINK)  
25. 308-9773 [1] SWITCH AS-PUSH BUTTON (RED)(EMERGENCY STOP)  
26. 308-9774 [1] RING  
27. 308-9775 [1] LATCH-MOUNTING  
28. 308-9776 [3] BLOCK-CONTACT  
29. 308-9777 [1] BLOCK-CONTACT  
30. 314-9101 [7] BRACKET-END  
31. 325-1788 [2] COVER-TERMINAL  
32. 339-2958 [1] GASKET  
33. 340-7298 [1] CAP AS  
34. 350-2810 [2] HOLDER-FUSE  
35. 350-3459 [1] MODULE  
36. 351-2429 Y [1] CONTROL GP-GENERATOR SET (EMCP 4.3)  
37. 381-7679 Y [1] HARNESS AS-BOX  
38. 382-1792 Y [1] BOX GP-INSTRUMENT PANEL  
39. 382-1793 [1] PANEL AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  7T-1099 [13] LINK  
  9X-2032 M [9] NUT-WELD (M4X0.7-THD)  
  097-5921 B [3] RAIL-MOUNTING  
40. 382-1795 Y [1] HARNESS AS-WIRING (GAUGE)  
41. 382-2665 [1] FILM-IDENTIFICATION (INSTRUMENT PANEL)  
42. 383-8561 [1] MARKER-TERMINAL  
43. 383-8562 [1] MARKER-TERMINAL  
44. 393-5576 [1] PLATE  
45. [1] PLATE AS  
46. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
47. 099-6418 M [6] NUT (M6X1-THD)  
48. 101-4306 M [2] BOLT-SOCKET HEAD (M4X0.7X45-MM)  
49. 151-4977 [68] WASHER (4.445X9.525X1.092-MM THK)  
50. 203-9007 [2] NUT (1-1/2-18-THD)  
51. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
52. 274-8068 Y [1] MODULE GP-INTERFACE  
53. 311-8366 [2] WASHER-HARD (8.8X16X2-MM THK)  
54. 3C-6969 M [4] NUT (M3X0.5-THD)  
55. 4B-2043 [4] NUT (8-32-THD)  
56. 4B-4274 [9] WASHER (5.5X13X1.2-MM THK)  
57. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
58. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
59. 5C-7261 M [4] NUT (M8X1.25-THD)  
60. 5C-8312 M [4] NUT (M4X0.7-THD)  
61. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
62. 6V-3507 [6] SEAL-RECTANGULAR  
63. 6V-5683 M [4] BOLT (M6X1X16-MM)  
64. 6V-9671 M [4] SCREW-MACHINE (M3X0.5X12-MM)  
65. 6V-9672 M [36] SCREW-MACHINE (M4X0.7X16-MM)  
66. 7K-1181 B [16] STRAP-CABLE  
67. 8T-0337 M [9] SCREW-MACHINE (M4X0.7X12-MM)  
68. 8T-2659 M [32] LOCKNUT (M4X0.7-THD)  
69. 8T-4138 M [2] BOLT (M6X1X20-MM)  
70. 9X-2027 [1] WASHER (11X18X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35551012
 

381-7675: BOX GP-INSTRUMENT PANEL

381-7675 BOX GP-INSTRUMENT PANEL -LAND DRILLING
S/N PTM1-UP
Type 2
AN ATTACHMENT
i05755633 SEBP3555
3817675 BOX GP-INSTRUMENT PANEL Parts scheme 3817675 BOX GP-INSTRUMENT PANEL Parts scheme 3817675 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-6936 [1] WIRE AS  
2. 4W-3595 [2] MOUNT  
3. 7R-3027 C [1] CAP-DUST  
4. 9X-4711 C [1] CAP  
5. 103-6272 [1] SEAL  
6. 115-1322 C [3] TERMINAL (DOUBLE)  
7. 131-4891 [8] GASKET  
8. 132-8488 C [1] NUT-RING  
9. 166-6161 [2] DUCT-WIRE  
10. 166-6162 [1] DUCT-WIRE  
11. 173-5413 C [4] CLAMP  
12. 179-8828 C [1] BASE-RELAY (2-POLE)  
13. 179-8829 [1] RELAY (2-POLE, 24-VOLT)(INSTRUMENT PANEL)  
14. 205-9470 [8] MOUNT-FLEXIBLE  
15. 225-6827 [1] GASKET  
16. 228-3581 C [1] FILM-WARNING (DO NOT OPERATE, READ OMM)  
17. 229-5047 C [1] FILM-WARNING (SHOCK HAZARD, READ OMM)  
18. 234-5925 [1] GASKET  
19. 235-2761 [1] GASKET  
20. 246-2932 C [1] CAP  
21. 257-4907 C [1] COVER AS-ACCESS  
22. 270-2679 [1] LOCKWASHER  
23. 272-5835 [3] FUSE (0.5-AMPERE)  
24. 275-2081 Y [1] GAUGE GP-COOLANT TEMPERATURE (ENGINE)  
25. 275-2096 Y [1] GAUGE GP-ENGINE OIL PRESSURE  
26. 275-2098 Y [1] GAUGE GP-ENGINE OIL TEMP (ENGINE)  
27. 275-2100 Y [1] GAUGE GP-ENGINE PERCENT LOAD  
28. 275-2110 Y [1] VOLTMETER GP (DATA LINK)  
29. 308-9773 [1] SWITCH AS-PUSH BUTTON (RED)(EMERGENCY STOP)  
30. 308-9774 [1] RING  
31. 308-9775 [1] LATCH-MOUNTING  
32. 308-9776 [1] BLOCK-CONTACT  
33. 308-9777 [3] BLOCK-CONTACT  
34. 314-9101 [7] BRACKET-END  
35. 339-2958 [1] GASKET  
36. 340-7298 [1] CAP AS  
37. 350-2810 C [1] HOLDER-FUSE  
38. 350-3459 C [2] MODULE  
39. 351-2429 Y [1] CONTROL GP-GENERATOR SET (EMCP 4.3)  
40. 363-8626 [1] GAUGE GP-FUEL PRESSURE (INSTRUMENT)  
41. 374-5718 C [113] BLOCK-TERMINAL (800-VOLT, 24-AMPERE)  
42. 374-5719 C [10] COVER-END  
43. 374-5723 C [5] BAR-FIXED BRIDGE  
44. 374-5726 C [1] STRIP-CONTACT  
45. 381-7679 Y [1] HARNESS AS-BOX  
46. 382-1792 Y [1] BOX GP-INSTRUMENT PANEL  
47. 382-1793 [1] PANEL AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  7T-1099 [13] LINK  
  9X-2032 M [9] NUT-WELD (M4X0.7-THD)  
  097-5921 B [3] RAIL-MOUNTING  
48. 382-1795 Y [1] HARNESS AS-WIRING (GAUGE)  
49. 382-2665 [1] FILM-IDENTIFICATION (INSTRUMENT PANEL)  
50. 383-8561 [1] MARKER-TERMINAL  
51. 387-0737 C [2] HOLDER-FUSE  
52. 393-5576 [1] PLATE  
53. 420-7443 [1] BRACKET  
54. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
55. 099-6418 M [6] NUT (M6X1-THD)  
56. 101-4306 M [2] BOLT-SOCKET HEAD (M4X0.7X45-MM)  
57. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
58. 128-4249 C [1] LOCKWASHER  
59. 151-4977 [68] WASHER (4.445X9.525X1.092-MM THK)  
60. 190-2558 C [2] FUSE (6-AMPERE)  
61. 203-9007 C [3] NUT (1-1/2-18-THD)  
62. 211-0052 C [1] NUT (1-11/16-18-THD)  
63. 274-8068 Y [1] MODULE GP-INTERFACE  
64. 3V-2431 [1] WASHER (10.2X16X2-MM THK)  
65. 4B-2043 [4] NUT (8-32-THD)  
66. 4B-4274 C [8] WASHER (5.5X13X1.2-MM THK)  
67. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
68. 4Y-1638 M [2] NUT (M4X0.7-THD)  
69. 5C-7261 M [4] NUT (M8X1.25-THD)  
70. 5C-8312 M [4] NUT (M4X0.7-THD)  
71. 5C-9553 M [1] BOLT (M6X1X16-MM)  
72. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
73. 6V-2694 C [1] WASHER (42X51X2-MM THK)  
74. 6V-3507 [6] SEAL-RECTANGULAR  
75. 6V-5683 M [4] BOLT (M6X1X16-MM)  
76. 6V-9671 M [4] SCREW-MACHINE (M3X0.5X12-MM)  
77. 6V-9672 M [36] SCREW-MACHINE (M4X0.7X16-MM)  
78. 7E-7606 M [1] BOLT (M10X1.5X16-MM)  
79. 8T-0337 CM [8] SCREW-MACHINE (M4X0.7X12-MM)  
80. 8T-2659 M [32] LOCKNUT (M4X0.7-THD)  
81. 8T-4138 M [1] BOLT (M6X1X20-MM)  
82. 9X-2027 [1] WASHER (11X18X2-MM THK)  
83. 7K-1181 B [16] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35551013
 

382-1791: BOX GP-INSTRUMENT PANEL

382-1791 BOX GP-INSTRUMENT PANEL
S/N PTM1-UP
AN ATTACHMENT
i04935764 SEBP3555
3821791 BOX GP-INSTRUMENT PANEL Parts scheme 3821791 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5503 [3] BAR-FIXED BRIDGE  
2. 4W-3595 [2] MOUNT  
3. 9Y-8419 [2] FUSE (12-AMPERE)  
4. 103-6272 [1] SEAL  
5. 115-1322 [131] TERMINAL (DOUBLE)  
6. 131-4891 [8] GASKET  
7. 166-6161 [2] DUCT-WIRE  
8. 166-6162 [1] DUCT-WIRE  
9. 173-5413 [2] CLAMP  
10. 179-8828 [3] BASE-RELAY (2-POLE)  
11. 179-8829 [3] RELAY (2-POLE, 24-VOLT)(PANEL)  
12. 205-9470 [8] MOUNT-FLEXIBLE  
13. 225-6827 [1] GASKET  
14. 234-5925 [1] GASKET  
15. 235-2761 [1] GASKET  
17. 270-2679 [1] LOCKWASHER  
18. 272-5835 [3] FUSE (0.5-AMPERE)  
19. 275-2081 Y [1] GAUGE GP-COOLANT TEMPERATURE (ENGINE)  
20. 363-8626 [1] GAUGE GP-FUEL PRESSURE  
21. 275-2096 Y [1] GAUGE GP-ENGINE OIL PRESSURE  
22. 275-2098 Y [1] GAUGE GP-ENGINE OIL TEMP  
23. 275-2100 Y [1] GAUGE GP-ENGINE PERCENT LOAD  
24. 275-2110 Y [1] VOLTMETER GP (DATA LINK)  
25. 308-9773 [1] SWITCH AS-PUSH BUTTON (RED)(EMERGENCY STOP)  
26. 308-9774 [1] RING  
27. 308-9775 [1] LATCH-MOUNTING  
28. 308-9776 [1] BLOCK-CONTACT  
29. 308-9777 [3] BLOCK-CONTACT  
30. 314-9101 [7] BRACKET-END  
31. 325-1788 [2] COVER-TERMINAL  
32. 339-2958 [1] GASKET  
33. 340-7298 [1] CAP AS  
34. 350-2810 [2] HOLDER-FUSE  
35. 350-3459 [1] MODULE  
36. 351-2430 Y [1] CONTROL GP-GENERATOR SET (EMCP 4.4)  
37. 382-1792 Y [1] BOX GP-INSTRUMENT PANEL  
38. 382-1793 [1] PANEL AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [13] LINK  
  9X-2032 M [9] NUT-WELD (M4X0.7-THD)  
  097-5921 [3] RAIL-MOUNTING  
39. 382-1794 Y [1] HARNESS AS-BOX  
40. 382-1795 Y [1] HARNESS AS-WIRING (INDICATORS)  
41. 382-2665 [1] FILM-IDENTIFICATION (INSTRUMENT PANEL)  
42. 383-8561 [1] MARKER-TERMINAL  
43. 383-8562 [1] MARKER-TERMINAL  
44. 393-5576 [1] PLATE  
46. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
47. 099-6418 M [6] NUT (M6X1-THD)  
48. 101-4306 M [2] BOLT-SOCKET HEAD (M4X0.7X45-MM)  
49. 151-4977 [68] WASHER (4.445X9.525X1.092-MM THK)  
50. 203-9007 [2] NUT (1-1/2-18-THD)  
51. 114-6658 [1] WASHER (6.5X17X1-MM THK)  
52. 274-8068 Y [1] MODULE GP-INTERFACE  
54. 3C-6969 M [4] NUT (M3X0.5-THD)  
55. 4B-2043 [4] NUT (8-32-THD)  
56. 4B-4274 [9] WASHER (5.5X13X1.2-MM THK)  
57. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
58. 4Y-1638 M [2] NUT (M4X0.7-THD)  
59. 5C-7261 M [4] NUT (M8X1.25-THD)  
60. 5C-8312 M [4] NUT (M4X0.7-THD)  
61. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
62. 6V-3507 [6] SEAL-RECTANGULAR  
63. 6V-5683 M [4] BOLT (M6X1X16-MM)  
64. 6V-9671 M [4] SCREW-MACHINE (M3X0.5X12-MM)  
65. 6V-9672 M [36] SCREW-MACHINE (M4X0.7X16-MM)  
66. 7K-1181 B [18] STRAP-CABLE  
67. 8T-0337 M [9] SCREW-MACHINE (M4X0.7X12-MM)  
68. 8T-2659 M [32] LOCKNUT (M4X0.7-THD)  
69. 8T-4138 M [1] BOLT (M6X1X20-MM)  
70. 5C-9553 M [1] BOLT (M6X1X16-MM)  
71. 3V-2431 [1] WASHER (10.2X16X2-MM THK)  
72. 9X-2027 [1] WASHER (11X18X2-MM THK)  
73. 7E-7606 M [1] BOLT (M10X1.5X16-MM)  
74. 420-7443 [1] BRACKET  
75. 1H-6936 [1] WIRE AS  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35551014
 

382-1792: BOX GP-INSTRUMENT PANEL

382-1792 BOX GP-INSTRUMENT PANEL
S/N PTM1-UP
PART OF 381-7675, 382-1791, 444-0994 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT
i04935767 SEBP3555
3821792 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-3723 [2] HINGE AS  
    (EACH INCLUDES)
  8T-5447 [1] RING-RETAINING  
2. 339-3085 [2] LATCH AS  
3. 095-0841 [4] PIN-COTTER  
4. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 6V-9632 M [4] NUT-WELD (M6X1-THD)  
6. 7T-1099 [6] LINK  
7. 9P-6895 [4] PIN  
8. 6V-1392 D SEAL (2.4-M)  
9. 6V-1231 [1] STUD-WELD (3/8-16-THD)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP35551015
 

444-0994: BOX GP-INSTRUMENT PANEL

444-0994 BOX GP-INSTRUMENT PANEL
S/N PTM1-UP
Type 1
AN ATTACHMENT
i05412427 SEBP3555
4440994 BOX GP-INSTRUMENT PANEL Parts scheme 4440994 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-6936 [1] WIRE AS  
2. 4W-3595 [2] MOUNT  
3. 7R-3027 [1] CAP-DUST  
4. 8C-5607 [8] MOUNT-ISOLATION  
5. 9X-4711 [1] CAP  
6. 103-6272 [1] SEAL  
7. 115-1322 [3] TERMINAL (DOUBLE)  
8. 131-4891 [8] GASKET  
9. 132-8488 [1] NUT-RING  
10. 166-6161 [1] DUCT-WIRE  
11. 166-6162 [2] DUCT-WIRE  
12. 173-5413 [4] CLAMP  
13. 179-8828 [1] BASE-RELAY (2-POLE)  
14. 179-8829 [1] RELAY (2-POLE, 24-VOLT)(INSTRUMENT PANEL)  
15. 205-9470 [8] MOUNT-FLEXIBLE  
16. 180-9214 [1] NUT (1-11/16-18-THD)  
17. 225-6827 [1] GASKET  
18. 228-3581 Y [1] FILM-WARNING (DO NOT OPERATE, READ OMM)  
19. 229-5047 [1] FILM-WARNING (SHOCK HAZARD, READ OMM)  
20. 234-5925 [1] GASKET  
21. 235-2761 [1] GASKET  
22. 246-2932 [1] CAP  
23. 257-4907 [1] COVER AS-ACCESS  
24. 270-2679 [1] LOCKWASHER  
25. 272-5835 [3] FUSE (0.5-AMPERE)  
26. 275-2081 Y [1] GAUGE GP-COOLANT TEMPERATURE (ENGINE)  
27. 275-2096 Y [1] GAUGE GP-ENGINE OIL PRESSURE (INDICATORS)  
28. 275-2098 Y [1] GAUGE GP-ENGINE OIL TEMP (ENGINE)  
29. 275-2100 Y [1] GAUGE GP-ENGINE PERCENT LOAD (INDICATOR)  
30. 275-2110 Y [1] VOLTMETER GP (DATA LINK)  
31. 308-9773 [1] SWITCH AS-PUSH BUTTON (RED)(EMERGENCY STOP)  
32. 308-9774 [1] RING  
33. 308-9775 [1] LATCH-MOUNTING  
34. 308-9776 [1] BLOCK-CONTACT  
35. 308-9777 [3] BLOCK-CONTACT  
36. 314-9101 [7] BRACKET-END  
37. 339-2958 [1] GASKET  
38. 340-7298 [1] CAP AS  
39. 350-2810 Y [1] HOLDER-FUSE  
40. 350-3459 [2] MODULE  
41. 351-2429 Y [1] CONTROL GP-GENERATOR SET (EMCP 4.3)  
42. 363-8626 [1] GAUGE GP-FUEL PRESSURE  
43. 374-5718 [113] BLOCK-TERMINAL (800-VOLT, 24-AMPERE)  
44. 374-5719 [5] COVER-END  
45. 374-5723 [5] BAR-FIXED BRIDGE  
46. 374-5726 [1] STRIP-CONTACT  
47. 381-7679 Y [1] HARNESS AS-BOX  
48. 382-1792 Y [1] BOX GP-INSTRUMENT PANEL  
49. 382-1793 [1] PANEL AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  7T-1099 [13] LINK  
  9X-2032 M [9] NUT-WELD (M4X0.7-THD)  
  097-5921 [3] RAIL-MOUNTING  
50. 382-1795 Y [1] HARNESS AS-WIRING  
51. 382-2665 [1] FILM-IDENTIFICATION (INSTRUMENT PANEL)  
52. 383-8561 [1] MARKER-TERMINAL  
53. 443-1279 [2] HOLDER-FUSE  
54. 393-5576 [1] PLATE  
55. 420-7443 [1] BRACKET  
56. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
57. 099-6418 M [6] NUT (M6X1-THD)  
58. 101-4306 M [2] BOLT-SOCKET HEAD (M4X0.7X45-MM)  
59. 114-6658 [1] WASHER (6.5X17X1-MM THK)  
60. 128-4249 [1] LOCKWASHER  
61. 151-4977 [68] WASHER (4.445X9.525X1.092-MM THK)  
62. 190-2558 [2] FUSE (6-AMPERE)  
63. 203-9007 [3] NUT (1-1/2-18-THD)  
64. 274-8068 Y [1] MODULE GP-INTERFACE  
65. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
66. 459-0786 Y [1] CONTROL GP-COMMUNICATION (NETWORK MANAGER)  
67. 4B-2043 [4] NUT (8-32-THD)  
68. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
69. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
70. 4Y-1638 M [2] NUT (M4X0.7-THD)  
71. 5C-7261 M [4] NUT (M8X1.25-THD)  
72. 5C-8312 M [4] NUT (M4X0.7-THD)  
73. 8C-3210 M [1] BOLT (M6X1X16-MM)  
74. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
75. 6V-2694 [1] WASHER (42X51X2-MM THK)  
76. 6V-3507 [6] SEAL-RECTANGULAR  
77. 6V-5683 M [4] BOLT (M6X1X16-MM)  
78. 293-2033 [4] SCREW-LOCK (4-40X0.5-IN)  
79. 6V-9672 M [36] SCREW-MACHINE (M4X0.7X16-MM)  
80. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
81. 8C-5608 [4] SPACER (6.5X9.5X25.4-MM THK)  
82. 8C-8451 M [4] BOLT (M6X1X40-MM)  
83. 8T-0337 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
84. 8T-2659 M [32] LOCKNUT (M4X0.7-THD)  
85. 8T-4138 M [1] BOLT (M6X1X20-MM)  
86. 9X-2027 [1] WASHER (11X18X2-MM THK)  
87. 9X-6165 [8] WASHER (6.5X22X2.5-MM THK)  
88. 7K-1181 B [16] STRAP-CABLE  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35551016
 

444-0994: BOX GP-INSTRUMENT PANEL

444-0994 BOX GP-INSTRUMENT PANEL
S/N PTM1-UP
Type 2
AN ATTACHMENT
i07729023 SEBP3555
4440994 BOX GP-INSTRUMENT PANEL Parts scheme 4440994 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-6936 [1] WIRE AS  
2. 4W-3595 [2] MOUNT  
3. 7R-3027 [1] CAP-DUST  
4. 8C-5607 [8] MOUNT-ISOLATION  
5. 9X-4711 [1] CAP  
6. 103-6272 [1] SEAL  
7. 115-1322 [3] TERMINAL (DOUBLE)  
8. 131-4891 [8] GASKET  
9. 132-8488 [1] NUT-RING  
10. 166-6161 [1] DUCT-WIRE  
11. 166-6162 [2] DUCT-WIRE  
12. 173-5413 [4] CLAMP  
13. 179-8828 [1] BASE-RELAY (2-POLE)  
14. 179-8829 [1] RELAY (2-POLE, 24-VOLT)(INSTRUMENT PANEL)  
15. 205-9470 [8] MOUNT-FLEXIBLE  
16. 180-9214 [1] NUT (1-11/16-18-THD)  
17. 225-6827 [1] GASKET  
18. 228-3581 [1] FILM-WARNING (DO NOT OPERATE, READ OMM)  
19. 229-5047 [1] FILM-WARNING (SHOCK HAZARD, READ OMM)  
20. 234-5925 [1] GASKET  
21. 235-2761 [1] GASKET  
22. 246-2932 [1] CAP  
23. 257-4907 [1] COVER AS-ACCESS  
24. 270-2679 [1] LOCKWASHER  
25. 550-1821 C [3] FUSE (1-AMPERE)  
26. 275-2081 Y [1] GAUGE GP-COOLANT TEMPERATURE (ENGINE)  
27. 275-2096 Y [1] GAUGE GP-ENGINE OIL PRESSURE (INDICATORS)  
28. 275-2098 Y [1] GAUGE GP-ENGINE OIL TEMP (ENGINE)  
29. 275-2100 Y [1] GAUGE GP-ENGINE PERCENT LOAD (INDICATOR)  
30. 275-2110 Y [1] VOLTMETER GP (DATA LINK)  
31. 308-9773 [1] SWITCH AS-PUSH BUTTON (RED)(EMERGENCY STOP)  
32. 308-9774 [1] RING  
33. 308-9775 [1] LATCH-MOUNTING  
34. 308-9776 [1] BLOCK-CONTACT  
35. 308-9777 [3] BLOCK-CONTACT  
36. 314-9101 [7] BRACKET-END  
37. 339-2958 [1] GASKET  
38. 340-7298 [1] CAP AS  
39. 350-2810 [1] HOLDER-FUSE  
40. 350-3459 [2] MODULE  
41. 351-2429 Y [1] CONTROL GP-GENERATOR SET (EMCP 4.3)  
42. 363-8626 [1] GAUGE GP-FUEL PRESSURE  
43. 374-5718 [113] BLOCK-TERMINAL (800-VOLT, 24-AMPERE)  
44. 374-5719 [5] COVER-END  
45. 374-5723 [5] BAR-FIXED BRIDGE  
46. 374-5726 [1] STRIP-CONTACT  
47. 381-7679 Y [1] HARNESS AS-BOX (INSTRUMENT PANEL)  
48. 382-1792 Y [1] BOX GP-INSTRUMENT PANEL  
49. 382-1793 [1] PANEL AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  7T-1099 [13] LINK  
  9X-2032 M [9] NUT-WELD (M4X0.7-THD)  
  097-5921 [3] RAIL-MOUNTING  
50. 382-1795 Y [1] HARNESS AS-WIRING (GAUGE)  
51. 382-2665 [1] FILM-IDENTIFICATION (INSTRUMENT PANEL)  
52. 383-8561 [1] MARKER-TERMINAL  
53. 443-1279 [2] HOLDER-FUSE  
54. 393-5576 [1] PLATE  
55. 420-7443 [1] BRACKET  
56. 096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
57. 099-6418 M [6] NUT (M6X1-THD)  
58. 101-4306 M [2] BOLT-SOCKET HEAD (M4X0.7X45-MM)  
59. 114-6658 [1] WASHER (6.5X17X1-MM THK)  
60. 128-4249 [1] LOCKWASHER  
61. 151-4977 [68] WASHER (4.445X9.525X1.092-MM THK)  
62. 190-2558 [2] FUSE (6-AMPERE)  
63. 203-9007 [3] NUT (1-1/2-18-THD)  
64. 274-8068 Y [1] MODULE GP-INTERFACE  
65. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
66. 459-0786 Y [1] CONTROL GP-COMMUNICATION (NETWORK MANAGER)  
67. 4B-2043 [4] NUT (8-32-THD)  
68. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
69. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
70. 4Y-1638 M [2] NUT (M4X0.7-THD)  
71. 5C-7261 M [4] NUT (M8X1.25-THD)  
72. 5C-8312 M [4] NUT (M4X0.7-THD)  
73. 8C-3210 M [1] BOLT (M6X1X16-MM)  
74. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
75. 6V-2694 [1] WASHER (42X51X2-MM THK)  
76. 6V-3507 [6] SEAL-RECTANGULAR  
77. 6V-5683 M [4] BOLT (M6X1X16-MM)  
78. 293-2033 [4] SCREW-LOCK (4-40X0.5-IN)  
79. 6V-9672 M [36] SCREW-MACHINE (M4X0.7X16-MM)  
80. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
81. 8C-5608 [4] SPACER (6.5X9.5X25.4-MM THK)  
82. 8C-8451 M [4] BOLT (M6X1X40-MM)  
83. 8T-0337 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
84. 8T-2659 M [32] LOCKNUT (M4X0.7-THD)  
85. 8T-4138 M [1] BOLT (M6X1X20-MM)  
86. 9X-2027 [1] WASHER (11X18X2-MM THK)  
87. 9X-6165 [8] WASHER (6.5X22X2.5-MM THK)  
88. 7K-1181 B [16] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35551017
 

101-0225: CONTROL GP-EMCP ELECTRONIC

101-0225 CONTROL GP-EMCP ELECTRONIC
S/N PTM1-UP
AC TRANSFORMER BOX
PART OF 136-6924 PANEL GP-CONTROL
AN ATTACHMENT
i00462426 SEBP3555
1010225 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] HOUSING AS (TRANSFORMER BOX-EMCP II)  
1A. 3N-5977 [1] BLOCK-FUSE (30-AMPERE)  
1B. 107-5696 [1] STRIP-TERMINAL  
1C. 107-5907 [1] FILM-IDENTIFICATION (TERMINAL MARKER)  
2. [1] CHANNEL AS (TRANSFORMER-EMCP II)  
2A. 4B-2049 [1] NUT (10-32-THD)  
2B. 8F-1434 [1] LOCKWASHER  
2C. 186-3736 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
2D. 102-8816 [1] SEAL  
2E. 4B-4274 [11] WASHER (5.5X13X1.2-MM THK)  
2F. 155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 108-8127 [8] SCREW-PAN HEAD (10-24X0.25-IN)  
 

#SEBP35551018
 

118-0175: CONTROL GP-EMCP ELECTRONIC

118-0175 CONTROL GP-EMCP ELECTRONIC
S/N PTM1-UP
AC TRANSFORMER BOX +
PART OF 332-8866 KIT-ELECTRONIC CONVERSION
i00478777 SEBP3555
1180175 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5276 [1] STRIP-TERMINAL  
1A. 3N-5977 [1] BLOCK-FUSE (30-AMPERE)  
2. 108-8127 [8] SCREW-PAN HEAD (10-24X0.25-IN)  
3. 3E-3386 [1] WEDGE-PLUG LOCK  
3A. 155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3B. 5P-1475 [7] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
3C. 5P-1476 [3] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
3D. 8L-8413 [16] STRAP-CABLE (WHITE)  
3E. 186-3736 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
3F. 4B-2049 [9] NUT (10-32-THD)  
3G. 186-3736 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
3H. 4B-4274 [15] WASHER (5.5X13X1.2-MM THK)  
4. 5N-5159 [3] JUMPER-STRIP  
 

#SEBP35551019
 

118-2070: CONTROL GP-EMCP ELECTRONIC

118-2070 CONTROL GP-EMCP ELECTRONIC
S/N PTM1-UP
GENERATOR SET CONTROL +
PART OF 332-8866 KIT-ELECTRONIC CONVERSION
i00480772 SEBP3555
1182070 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-9850 [1] CONTROL GP-ELECTRONIC (RELAY MODULE)  
1A. 1S-4974 [1] SEAL-O-RING  
2. 4B-4863 [10] WASHER (4.7X11X1.2-MM THK)  
3. 9W-1464 [6] SCREW (1/4-20X1-IN)  
4. 3J-7354 [1] SEAL-O-RING  
5. 9S-8002 [1] PLUG (7/16-20-THD)  
   
  130-9715 F [1] FILM-INFORMATION (GENERATOR SET CONTROL +)  
  159-1798 F [1] FILM-CONTROL PANEL (GENERATOR SET CONTROL +)  
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
Procedure for Reconfiguring a 187-3511 Timer Gp to Annunciate a "Not In Auto" Alarm Without Generating Additional Alarms {4490}
2002/11/01
A New Pyrometer Is Available For Certain 3500 and G3500 Engines {7451, 7466, 7490}
2012/12/19
Operation and Maintenance Manual
Gauges and Indicators
3500 Generator Sets
Alarms and Shutoffs
3500B Generator Sets
Engine Air Cleaner Service Indicator - Inspect
3508B, 3512B, and 3516B High Displacement Generator Sets
Gauges and Indicators
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 3 (EMCP 3)
3500B Generator Sets
Monitoring System
3508B, 3512B, and 3516B High Displacement Generator Sets
Engine Air Cleaner Service Indicator - Inspect
3500B Generator Sets
Control Panel - Inspect/Test
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 3 (EMCP 3)
3508B, 3512B, and 3516B High Displacement Generator Sets
Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1 / 4.2 / 4.2B
3500B Generator Sets
Control Panel - Inspect/Test
3500B Generator Sets
Special Instruction
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
Systems Operation
General Information
EMCP3
Real Time Clock Programming
EMCP3
Setpoint Programming
EMCP3
Electronic Control Module (Generator Set)
EMCP3
Data Link
EMCP3
Event Resetting
EMCP3
Event Viewing
EMCP3
Thermocouple Module
EMCP3
Resistive Temperature Device Module
EMCP3
Discrete Input/Output Module
EMCP3
Password Entry
EMCP3
Voltage and Frequency Adjustment
EMCP3
Component Location
EMCP3
Digital Input Programming
EMCP3
Spare Analog Input Programming
EMCP3
Relay Output Programming
EMCP3
Digital Output Programming
EMCP3
System Operation
EMCP3
MUI Engine Monitoring and Control
EMCP3
Text String Programming
EMCP3
Cycle Timer Programming
EMCP3
Trip Point Programming
EMCP3
Monitoring Software for Computer
EMCP3
Testing and Adjusting
Coolant Temperature Sensor - Test
3500B and 3500B High Displacement Generator Set Engines
Indicators for Engine Oil Pressure
3500B and 3500B High Displacement Generator Set Engines
Typical Generator Abbreviations
EMCP3
External Potential Transformer Connections
EMCP3
Electronic Control Module (Generator Set) - Replace
EMCP3
Electronic Control Module (Generator Set) - Configure
EMCP3
Electronic Control Module (Generator Set) - Flash Program
EMCP3
ECM Connections
EMCP3
Engine Setpoint Verification - Test
EMCP3
Troubleshooting
General Information
EMCP3
Engine Cooldown Warning
EMCP3
Engine Overcrank Warning
EMCP3
Engine Speed Warning
EMCP3
Generator Control Not in Automatic Warning
EMCP3
Generator Overcurrent Warning
EMCP3
Generator Overfrequency Warning
EMCP3
Generator Overvoltage Warning
EMCP3
Generator Reverse Power Warning
EMCP3
Generator Underfrequency Warning
EMCP3
Generator Undervoltage Warning
EMCP3
Service Maintenance Interval Warning
EMCP3
Analog Input Circuit Fault
EMCP3
Data Link Circuit Fault
EMCP3
Digital Input Circuit Fault
EMCP3
Digital Output Circuit Fault
EMCP3
Engine Speed Circuit Fault
EMCP3
Unexpected Engine Shutdown
EMCP3
Generator Output Sensing Circuit Fault
EMCP3
Engine Overspeed Warning
EMCP3
Engine Underspeed Warning
EMCP3
Service Magazine
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog 3512B :

BOX GP-INSTRUMENT PANEL
162-7662 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
126-7157 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
126-7156 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
125-9745 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
125-9745 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
125-7089 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
125-7089 BOX GP-INSTRUMENT PANEL
BOARD AS-RELAY
9Y-6497 BOARD AS-RELAY
BOX GP-INSTRUMENT PANEL
381-7675 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
381-7675 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
382-1791 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
382-1792 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
444-0994 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
444-0994 BOX GP-INSTRUMENT PANEL
CONTROL GP-EMCP ELECTRONIC
101-0225 CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
118-0175 CONTROL GP-EMCP ELECTRONIC

Truck sale:

Caterpillar 3512B
 
Caterpillar 3512B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3512B, mobile generator sets, Construction
182,189 
Caterpillar 3512B, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
Caterpillar 3512B
 
Caterpillar 3512B
- Industrial engines
FOLEY EQUIPMENT COMPANY
 
190,000 
Caterpillar 3512B, Stationary Generator Sets, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.